2015 International Lonestar

ELECTRICAL SYSTEM

Navistar, Inc. (Navistar) is recalling certain model year 2010-2015 International Lonestar vehicles manufactured October 12, 2009, to June 16, 2014, and 2009-2015 International ProStar vehicles manufactured December 16, 2008, to June 20, 2014. In the affected vehicles the electrical harness that supplies power to the HVAC system may not be of sufficient size for the electrical load of the circuit. This can result in an increase in resistance and heating at the connectors.

SERVICE BRAKES, AIR

Navistar, Inc. (Navistar) is recalling certain model year 2015-2016 International 9900, DuraStar, LoneStar, PayStar, ProStar, WorkStar and 2015 International TranStar and IC Bus CE vehicles equipped with a Haldex air braking system. The affected brake actuators may have been manufactured with an incomplete attachment of the internal rubber diaphragm to the actuation mechanism. This could cause dragging or overheated brakes.

VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:FAN/MOTOR

Navistar, Inc. (Navistar) is recalling certain model year 2011-2015 International DuraStar, ProStar, TranStar and WorkStar, 2012-2015 International TerraStar, 2013-2015 International LoneStar and IC Bus HC, and 2014-2015 IC Bus AC vehicles. A vehicle double battery jump start or electrical load dump event could result in an overvoltage condition of a component within the HVAC system linear power module (LPM) which is used to control the blower speed. The overvoltage condition could result in the overheating and failure of the LPM.

ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE

Navistar, Inc. (Navistar) is recalling certain model year 2015-2016 International 9900 trucks manufactured January 6, 2014, to March 12, 2015, and 2015-2016 International Lonestar trucks manufactured February 20, 2014, to March 13, 2015. The affected vehicles are equipped with a 6" diameter stack tail pipe, that may not have sufficient support. The unsupported weight of the upper stack tail pipe and vibration associated with normal vehicle operation over time may cause a crack of the weld joint between the inlet pipe and the flare expansion of the stack tail pipe, which may result in partial or full separation of the stack tail pipe from the vertical exhaust pipe.