2006 Audi A6

STRUCTURE:BODY:TRUNK LID

ON CERTAIN PASSENGER AND SPORT UTILITY VEHICLES, THE AUTOMATIC REAR LID INCLUDES AN ELECTRIC MOTOR AND CLUTCH THAT WORK IN CONJUNCTION WITH TWO GAS STRUTS TO OPEN AND CLOSE THE REAR LID, INCLUDING A MANUAL CLOSE FUNCTION. IF ONE OF THE STRUTS HAS A TOTAL LOSS OF PRESSURE, THE RESULTANT SLOW MOVEMENT OF THE REAR LID IS INTERPRETED BY THE SOFTWARE AS AN INTENDED MANUAL CLOSE AND THE MOTOR CLUTCH RELEASES TO CLOSE THE REAR LID IMMEDIATELY.

AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE

Volkswagen Group of America, Inc. (Volkswagen) is recalling certain model year 2004-2008 Audi A4, and 2005-2011 Audi A6 vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Volkswagen is recalling certain model year 2004-2008 Audi A4, and 2005-2008 Audi A6 vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Volkswagen is recalling model year 2004 Audi A4 vehicles originally sold, or registered, in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE

Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2009 Audi A4 Cabriolet, S4 Cabriolet, A6 Avant, A6 Sedan and S6 Sedan vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, the District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Additionally, unless included in "Zone B" above, Volkswagen is recalling certain 2005-2008 Audi A4 Avant, A4 Sedan, A6 Sedan, S4 Avant and S4 Sedan vehicles, 2007-2008 A4 Cabriolet, RS4 Sedan, S4 Cabriolet and S6 Sedan vehicles, and 2006-2008 A6 Avant and 2008 RS4 Cabriolet vehicles originally sold, or ever registered, in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE

Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2005-2008 Audi A4 Sedan, A4 Avant, S4 Avant and S4 Sedan, 2007-2008 RS4 Sedan, 2004 RS4 Cabriolet, 2007-2009 A4 Cabriolet and S4 Cabriolet, 2005-2011 A6 Sedan, 2006-2011 A6 Avant, and 2007-2011 S6 Sedan vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.