2008 Winnebago Tour

STEERING:HYDRAULIC POWER ASSIST SYSTEM

WINNEBAGO IS RECALLING 1,699 MY 2005-2009 WINNEBAGO JOURNEY, TOUR AND ITASCA MERIDIAN AND ELLIPSE MOTOR HOMES BUILT ON THE FREIGHTLINER XC CHASSIS. THE CHASSIS CONTAINS STEERING FILTERS THAT CAN PLUG DUE TO FAILURE OF THE SCREEN ADHESION TO THE FILTER HOUSING CAUSING A RISE IN RETURN LINE PRESSURE POTENTIALLY LEADING TO A HOSE SEPARATION FROM THE FILTER OR STEERING GEAR FITTING RESULTING IN A SUDDEN LOSS OF STEERING FLUID AND POWER ASSIST.

STEERING:LINKAGES:TIE ROD ASSEMBLY

WINNEBAGO IS RECALLING 306 MY 2007-2008 JOURNEY, DESTINATION, TOUR AND ITASCA MERIDIAN, LATITUDE, AND ELLIPSE MOTOR HOMES BUILT ON FREIGHTLINER CHASSIS. THE FASTENERS THAT ATTACH THE STEERING ARM OR TIE ROD ARMS TO THE SPINDLE MAY BE OVER OR UNDER-TIGHTENED.

EQUIPMENT ADAPTIVE/MOBILITY

WINNEBAGO IS RECALLING 31 MY 2006-2008 ITASCA CAMBRIA, HORIZON, WINNEBAGO ACCESS, ADVENTURER, JOURNEY, MINNIE WINNIE, SIGNTSEER, TOUR, VECTRA, AND VOYAGE MOTOR HOMES EQUIPPED WITH RICON PLATFORM STYLE WHEELCHAIR LIFTS. THESE LIFTS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 403, "PLATFORM LIFT SYSTEMS FOR MOTOR VEHICLES." THE ANTI-STOW INTERLOCK MAY NOT DETECT THE PRESENCE OF A WHEELCHAIR OR MOBILITY AID USER. THE PRESSURE SENSING SWITCH THAT DETECTS THE PRESENCE OF WEIGHT ON THE PLATFORM WAS NOT ADJUSTED TO THE NECESSARY SENSITIVITY LEVEL. THE LIFT COULD STOW EVEN THOUGH SOMEONE OR SOMETHING IS STILL ON THE LIFT.

SUSPENSION

WINNEBAGO IS RECALLING 594 MY 2008-2009 DESTINATION, JOURNEY, TOUR, VECTRA, AND ITASCA LATITUDE, MERIDIAN, ELLIPSE, AND HORIZON MOTOR HOMES EQUIPPED WITH SAF-HOLLAND ADL SERIES REAR SUSPENSIONS. IN SOME INSTANCES THE TRANSVERSE BEAM WAS NOT PROPERLY WELDED WHICH COULD RESULT IN A FAILURE OF THE WELD.

EQUIPMENT ADAPTIVE/MOBILITY

WINNEBAGO HAS NOTIFIED NHTSA OF A DEFECT IN CERTAIN MODEL YEAR 2008-2009 MOTORHOMES FITTED WITH RICON PUBLIC USE LIFTS. THE RESTRAINT BELT ON THESE LIFTS WAS DESIGNED TO PREVENT THE LIFT FROM MOVING, UNLESS THE TONGUE OF THE BELT IS FULLY ENGAGED AND LATCHED IN THE BUCKLE. RICON HAS DISCOVERED, HOWEVER, THAT IT IS POSSIBLE FOR THE OPERATOR TO INSERT THE BELT TONGUE INTO THE BUCKLE WITHOUT FULLY ENGAGING THE LATCHING MECHANISM. IN THIS CASE, THE RESTRAINT BELT WOULD APPEAR TO BE LATCHED, AND THE OPERATOR COULD RUN THE LIFT. IF THE RESTRAINT BELT TONGUE IS NOT FULLY ENGAGED INTO THE RESTRAINT BELT BUCKLE, AND LATCHED, THE LIFT MAY OPERATE WITH AN OCCUPANT ON THE PLATFORM.