2012 International Durastar

SERVICE BRAKES, AIR:SLACK ADJUSTERS:AUTOMATIC

NAVISTAR IS RECALL CERTAIN MODEL YEAR 2011 AND 2012 INTERNATIONAL DURASTAR AND WORKSTAR COMMERCIAL TRUCKS MANUFACTURED FROM OCTOBER 19, 2010, AND FEBRUARY 3, 2011, EQUIPPED WITH GUNITE AUTOMATIC SLACK ADJUSTERS. DUE TO AN INCOMPLETE "KNITTING" OF THE IRON AT THE TIME OF CASTING, INADEQUATE STRUCTURAL INTEGRITY OF THE SLACK ADJUSTER HOUSING CAN OCCUR, WHICH COULD CAUSE THE HOUSING TO BREAK AT THE HANDLE UNDER NORMAL OPERATING LOADS.

SERVICE BRAKES, AIR:ANTILOCK:CONTROL UNIT/MODULE

NAVISTAR IS RECALL CERTAIN MODEL YEAR 2011 AND 2012 INTERNATIONAL DURASTAR, PAYSTAR, WORKSTAR, TRANSTAR, LONESTAR AND PROSTAR COMMERCIAL TRUCKS MANUFACTURED FROM NOVEMBER 5, 2010, THROUGH MARCH 10, 2011, FOR FAILING TO COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS (ABS)." THE TRAILER ABS FAULT INDICATOR LAMP IN THE INSTRUMENT CLUSTER WILL NOT ILLUMINATE DUE TO A PROGRAMMING OR HARDWARE ISSUE WITH THE BRAKE SYSTEM ELECTRONIC CONTROL UNIT.

ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES

NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2011 AND 2012 INTERNATIONAL DURASTAR HEAVY TRUCKS EQUIPPED WITH ENGINE FEATURE CODE 12UXJ AND 12UXH MANUFACTURED FROM JANUARY 21, 2010, THROUGH APRIL 19, 2011. THE BATTERY CABLE INSULATION MAY ABRADE ON THE FRONT SUSPENSION SPRING SHACKLE, POSSIBLY RESULTING IN AN ELECTRICAL SHORT.

POWER TRAIN:AXLE ASSEMBLY

NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2012 INTERNATIONAL DURASTAR AND IC BUS HC HEAVY TRUCKS AND BUSES MANUFACTURED FROM FEBRUARY 10, 2011, THROUGH FEBRUARY 18, 2011,THAT WERE EQUIPPED WITH A MERITOR MFS08 SERIES NON-DRIVE FRONT STEER AXLE. DURING THE ASSEMBLY PROCESS, THE STEERING ATTACHMENT BOLTS MAY HAVE BEEN INSUFFICIENTLY TORQUED.

SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE

NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2012-2013 IC BUS CE-C, HC, AND INTERNATIONAL 9400 AND CERTAIN MODEL YEAR 2011 THROUGH 2013 INTERNATIONAL DURASTAR, PAYSTAR, WORKSTAR, TRANSTAR, LONESTAR, PROSTAR, 9200, AND 9800, AND CERTAIN MODEL YEAR 2013 INTERNATIONAL 9900, VEHICLES, MANUFACTURED FROM DECEMBER 2, 2010, THROUGH JANUARY 26, 2012, AND EQUIPPED WITH BENDIX ATR-6 TRACTION RELAY VALVES. IN EXTREMELY COLD CONDITIONS, THESE BENDIX RELAY VALVES MAY POTENTIALLY DEVELOP INTERNAL LEAKAGE. INTERNAL LEAKAGE CAN LEAD TO AIR PRESSURE BEING DELIVERED TO AFFECTED PRIMARY OR SECONDARY BRAKES CAUSING CONTINUOUS BRAKE APPLICATION.