2017 Volvo Xc90h TSBs

install component 32139082

Apply PFPE Anti squeak spray, p/n 30749880 spray.

Bearing kit replacement.

(Commonly Model Years 2016 And 2017)

found" or if functions such as lock/unlock are not working, please follow advice for detecting key

Follow instruction for the replacement of the ERAD.

They are used in development of Volvo labor operations and repair methods, and promote safety and quality repairs in a timely manner. Tools are classified as mandatory because associated repairs and/or diagnostics cannot be completed properly without them.

Follow instruction for the replacement of the ERAD.

and more precise fault tracing

and more precise fault tracing

and more precise fault tracing

They are used in development of Volvo labor operations and repair methods, and promote safety and quality repairs in a timely manner. Tools are classified as mandatory because associated repairs and/or diagnostics cannot be completed properly without them.

They are used in development of Volvo labor operations and repair methods, and promote safety and quality repairs in a timely manner. Tools are classified as mandatory because associated repairs and/or diagnostics cannot be completed properly without them.

and more precise fault tracing

New cleaning method developed.

of the following may appear: - Outer seat in second row is hard to move back after entrance to third row. Page 1 and 2 in attachment. - Backrest folds back too early (before seat is slide back). Page 1 - Outer seat in second row is hard to move or makes rattling noise over the rails. Page 3 - Gap closer (hinge cover) gets stuck and breaks. Page 4 . These repairs can be done without removing the seat from the car.

Rear Seat Entertainment (RSE) accessory, it may be necessary to set the DVD region code to US (region 1)

The H frame P/N (part number) 31391625 is no longer needed.Install front license plate using four (4) Wurth screws P/N 02151012. (For claiming use P/N 2151012)

The H frame P/N (part number) 31391625 is no longer needed.Install front license plate using four (4) Wurth screws P/N 02151012. (For claiming use P/N 2151012)

distribution center.

been changed to solve issues with the shells coming loose. Remote controls and shells of the new design are not compatible with remote controls and shells of old design, and vice versa If a remote control or shell of the old design is replaced with a new part of the new design, then both the remote control and shell needs to be changed to the new design.

The remotes do not function while the vehicle is in Transport Mode. See transport mode instructions

The H frame P/N (part number) 31391625 is no longer needed.Install front license plate using four (4) Wurth screws P/N 02151012. (For claiming use P/N 2151012)

Always replace both together, seat cushion upholstery and seat cushion foam . Both sides (Driver and/or passenger) should not be replaced as a pair if only one side has an issue. The backrest does not have to be replaced if only the seat cushion has an issue.

Please remove original bulletin by same number dated 2/18/2010.

Follow instruction for the replacement of the ERAD.

friction and may create a noise when temperature are cold. The noise is most obvious during slow driving and turning (e.g. parking maneuvers). The noise will become less after some driving. Spray wax, Wurth PN 0893923284 , on the outer bellows

In order to restore the connectivity functions, the "Roaming" function must be activated in the vehicle menus.

For the cars in the header this DTC can be ignored as it doesn't affect any of the functions in the car. Do not perform any fault tracing or component replacement due to this DTC if there is no related customer symptom.

and more precise fault tracing

They are used in development of Volvo labor operations and repair methods, and promote safety and quality repairs in a timely manner. Tools are classified as mandatory because associated repairs and/or diagnostics cannot be completed properly without them.

In order to restore the connectivity functions, the "Roaming" function must be activated in the vehicle menus.

For the cars in the header this DTC can be ignored as it doesn't affect any of the functions in the car. Do not perform any fault tracing or component replacement due to this DTC if there is no related customer symptom.

New cleaning method developed.

found" or if functions such as lock/unlock are not working, please follow advice for detecting key

They are used in development of Volvo labor operations and repair methods, and promote safety and quality repairs in a timely manner. Tools are classified as mandatory because associated repairs and/or diagnostics cannot be completed properly without them.

New cleaning method developed.

found" or if functions such as lock/unlock are not working, please follow advice for detecting key

They are used in development of Volvo labor operations and repair methods, and promote safety and quality repairs in a timely manner. Tools are classified as mandatory because associated repairs and/or diagnostics cannot be completed properly without them.

Follow instruction for the replacement of the ERAD.

Follow repair instruction.

of the following may appear: - Outer seat in second row is hard to move back after entrance to third row. Page 1 and 2 in attachment. - Backrest folds back too early (before seat is slide back). Page 1 - Outer seat in second row is hard to move or makes rattling noise over the rails. Page 3 - Gap closer (hinge cover) gets stuck and breaks. Page 4 . These repairs can be done without removing the seat from the car.

friction and may create a noise when temperature are cold. The noise is most obvious during slow driving and turning (e.g. parking maneuvers). The noise will become less after some driving. Spray wax, Wurth PN 0893923284 , on the outer bellows

The locking retainer/washer must not be tight against the seat frame. It must have a play of 1,0mm +/-0,5mm.

and more precise fault tracing

The locking retainer/washer must not be tight against the seat frame. It must have a play of 1,0mm +/-0,5mm.

as a troubleshooting aid for the Intellisafe system, please follow the advice in Technical Journal

The locking retainer/washer must not be tight against the seat frame. It must have a play of 1,0mm +/-0,5mm.

Please contact System Administrator"

with difficult to repair situations. If for some reason our technical experts cannot solve an issue directly, it will be escalated appropriately for further in-depth assistance to your local Field Technical specialist (FTS).

The blistering of the material is often causedby an air freshener applied directly to the airvents. Do not attach any sort of air freshenerdirectly on air vents.

CARS.THEY ARE USED IN DEVELOPMENT OF VOLVO LABOROPERATIONS AND REPAIR METHODS, AND PROMOTE SAFETY ANDQUALITY REPAIRS IN A TIMELY MANNER. TOOLS ARE CLASSIFIED AS MANDATORY BECAUSE ASSOCIATED REPAIRS AND/ORDIAGNOSTICS CANNOT BE COMPLETED PROPERLYWITHOUT THEM.

Replace the VCM Backup Battery and download the relevant Software.

After capturing a NEW VIDA readout, conduct the steps in VIDA.

After capturing a NEW VIDA readout, conduct the steps in VIDA.

After capturing a NEW VIDA readout, conduct the steps in VIDA.

Always repair the battery according to the methods in VIDA.

Use had held tester.

Updated BECM software was released

Recovering control modules stuck in not responding after failed SW download. Connect VIDA to read-out the car. Follow steps outlined in this TJ.

there is a warning message in the DIM about Low tire pressure and DTC BCM-C007768, follow advice under Service.

repair methods evolve.

System service required? displayed in DIM, then it is possible that there is water ingress into rear park assist sensors and connectors caused by splices in the rear cable harness. If the sensors and connectors have water ingress then follow method in VIDA

Perform Total Upgrade, replace fuse and compressor according to VIDA.

If not working check the heating grid wiring.

The resistance of the circuit can be monitored using the SRS parameter "High voltage battery power supply disconnect"

Perform Total Upgrade, replace fuse and compressor according to VIDA.

If not working check the heating grid wiring.

Swapping control modules may result in consequential damage to the swapped control module and in certain cases several other control modules in the vehicle. Swapping the Driver Information Module (DIM) is strictly forbidden as the DIM it is the main carrier of the odometer function, and will, in case of swapping, result in manipulated odometer value. Service: Please do NOT swap any control modules from vehicle to vehicle for testing, unless instructed to do so in a Vehicle Report by the Technical Helpdesk

Swapping control modules may result in consequential damage to the swapped control module and in certain cases several other control modules in the vehicle. Swapping the Driver Information Module (DIM) is strictly forbidden as the DIM it is the main carrier of the odometer function, and will, in case of swapping, result in manipulated odometer value. Service: Please do NOT swap any control modules from vehicle to vehicle for testing, unless instructed to do so in a Vehicle Report by the Technical Helpdesk

New software released structure week 201703 to prevent this fault. Do not replace low pressure sensor. Please perform a total upgrade in accordance with TJ 31543.

Diagnostic Trouble Code (DTC) may be set indicating an internal isolation fault that will render the IGM inoperable.The corrective action is to check the vehicles IGM serial number against the attached ?IGM Housing Serial Numbers? list. If the label number for the vehicles IGM is listed in the ?IGM Housing Serial Number? list, replace the IGM. If the label number from the vehicles IGM is not on the list, no further action is necessary.

by providing a visible indication of error frames that are being transmitted on the network when the fault becomes active. The advantage of using the EFF function is that error frames are usually transmitted on the network before a vehicle symptom can occur. Hence, if the fault is very intermittent in nature, it may be possible, for example, to induce the wiring fault for a short duration by manipulating the vehicle harnesses and connectors. The electrical fault will occur and be detected by the EFF without ever having a vehicle symptom appear. The instructions for setting up the tool have been simplified.

Module VCM = Vehicle Connectivity Master After upgrading an XC90 with the previous Total Upgrade software package, the navigation may show incorrect vehicle position in the CCD and DIM displays. This may happen intermittently or permanently. The customer may also see the vehicle position as incorrect in the Volvo On Call mobile app Service: *A further improved VCM software has been developed to prevent this symptom (now included in the current Total Upgrade, Service 2.0, and PDS software packages). It is available as of week 48, 2016. * Should a vehicle present this symptom, please perform a new Total Upgrade following software download guidelines in TJ 31543

performance due to a defective ambient temp sensor, and the symptom is confirmed, replace the ambient temperature sensor P/N 31442888 in the outer rear view mirror.

The clamping force on the bracket in the lower grill may be too low. Service: In case of customer complaints of a loose park assist sensor bracket, follow the instruction to assemble a foam block on the bracket to increase the clamping force.

performance due to a defective ambient temp sensor, and the symptom is confirmed, replace the ambient temperature sensor P/N 31442888 in the outer rear view mirror.

connection, the following symptoms may appear: 1 - In car apps such as TuneIn and Pandora connect to the service but say "Connecting..." when trying to play music. 2 - When a device is connected to the vehicle's WiFi hotspot, it will redirect to an AT&T website such as the one in the attachment Wifi Connection Message.jpg The above symptoms are due to the data plan for the P-SIM expiring. There is no fault with the vehicle. Should a customer present one of the above complaints, please direct them to the support site for instructions on how to renew the data plan for the P-SIM.

When viewing the Quiescient Current Statistics in VIDA, vehicles with a regular FMDM disturbance will often show a number of counts in the 400-800mA range. If a vehicle with the latest software continues to have a low State of Charge and no cause can be found, replace the FMDM. Perform a Total Upgrade according to TJ 31543. The new FMDMs are not compatible with older CEM software.

A text message which the driver has to actively acknowledge in order to remove it will be displayed when the fuel level is low. Service: Perform a Total Upgrade according to TJ 31543.

The resistance of the circuit can be monitored using the SRS parameter "High voltage battery power supply disconnect"

Perform Total Upgrade, replace fuse and compressor according to VIDA.

The resistance of the circuit can be monitored using the SRS parameter "High voltage battery power supply disconnect"

We process the personal data that you provide in connection with the creation of your VIDA account. The purpose of our processing is to administer your VIDA account (from registration to eventual termination of the account), to provide you with all the functionality related to VIDA, to allow access to VIDA and to communicate updates related to VIDA. Log data generated when using VIDA is processed as necessary or appropriate to safeguard the security and functionality of VIDA for example against malware or unauthorized access.

System service required? displayed in DIM, then it is possible that there is water ingress into rear park assist sensors and connectors caused by splices in the rear cable harness. If the sensors and connectors have water ingress then follow method in VIDA

System internal failures" is set. This is due to that the I-TPMS function in VDDM has not been initialized.

High Voltage Gloves. Proper use and handling when working on hybrid vehicles

Perform Total Upgrade, replace fuse and compressor according to VIDA.

Perform Total Upgrade, replace fuse and compressor according to VIDA.

Perform Total Upgrade, replace fuse and compressor according to VIDA.

manufacture and every 9 months thereafter.To maintain the battery, connect the battery to an appropriate 12V battery charger. Please follow all precautions that apply when charging a larger main lead-acid battery. The battery will self-discharge over time and if allowed to be left at a sufficiently low voltage, it will become permanently damaged. The battery must have a minimum voltage of 9 volts to be installed in a vehicle.

High Voltage Gloves. Proper use and handling when working on hybrid vehicles

Perform Total Upgrade, replace fuse and compressor according to VIDA.

Perform Total Upgrade, replace fuse and compressor according to VIDA.

Perform Total Upgrade, replace fuse and compressor according to VIDA.

manufacture and every 9 months thereafter.To maintain the battery, connect the battery to an appropriate 12V battery charger. Please follow all precautions that apply when charging a larger main lead-acid battery. The battery will self-discharge over time and if allowed to be left at a sufficiently low voltage, it will become permanently damaged. The battery must have a minimum voltage of 9 volts to be installed in a vehicle.

Perform Total Upgrade, replace fuse and compressor according to VIDA.

Perform Total Upgrade, replace fuse and compressor according to VIDA.

Perform Total Upgrade, replace fuse and compressor according to VIDA.

System service required? displayed in DIM, then it is possible that there is water ingress into rear park assist sensors and connectors caused by splices in the rear cable harness. If the sensors and connectors have water ingress then follow method in VIDA

of the vehicle's Intellisafe systems. This graphic was removed from the software on May 12, 2017 due to some inaccuracies. Service: Affected software packages: - Total Upgrade - Service 2.0 - PDS (Pre-Delivery Service) - VDDM_PBL (Vehicle Dynamics Domain Master Primary Bootloader) - DIM Upgrade or Reload Any vehicle that received one of the software packages listed above from May 8th, 2017 to May 11th, 2017 will have received the DIM graphic. From May 12th, 2017 and on, if any of the software packages listed above are loaded to a car that has received the new graphic, it will be removed. Vehicles built from structure week 2017w17 to 2017w22 will have the graphic in the car from the factory but it will be removed when any of the software packages listed are loaded. Do NOT replace, reload or upgrade any components for customer complaints of this function missing. This function will be re-added to the DIM software at a later date that is to be determined.

Over an extended period of time, this could lower the cell voltages and eventually degrade the battery. Periodically check the high voltage battery state of charge and keep it at or above 25% as per the instructions in the owners manual for "Long-term storage of vehicle with hybrid batteries".

open wiring diagram Final Solution: The only solution that we are aware of is to uninstall Adobe SVG viewer. Instructions below: Windows7/Windows 10: 1. Close VIDA. 2. Go into the Control Panel 3. Go into Program and Features - Uninstall program 4. Locate "Adobe SVG viewer" and uninstall it 5. Ignore any error message that might occur due to compability issues. 6. Start VIDA and try again.

If not working check the heating grid wiring.

open wiring diagram Final Solution: The only solution that we are aware of is to uninstall Adobe SVG viewer. Instructions below: Windows7/Windows 10: 1. Close VIDA. 2. Go into the Control Panel 3. Go into Program and Features - Uninstall program 4. Locate "Adobe SVG viewer" and uninstall it 5. Ignore any error message that might occur due to compability issues. 6. Start VIDA and try again.

System service required? displayed in DIM, then it is possible that there is water ingress into rear park assist sensors and connectors caused by splices in the rear cable harness. If the sensors and connectors have water ingress then follow method in VIDA

voltage battery is fully charged may be lower than previous after a recent software update. The actual range is the same, only the displayed range is affected. No service solution is currently available, work is ongoing.

This TJ is released to inform that a method is changed in VIDA regarding replacement of fuel low pressure sensor (LPS). There are two different methods in VIDA depending on version of fuel low pressure sensor (LPS), see attached document. The method in VIDA can be found if searching for VST operation 28405-2.

If the DTC is present please follow step under Service. Reported symptoms are: - Error message in DIM BECM = Battery Energy Control Module DIM = Driver Information Module Service: Perform an upgrade of the software according to TJ 31543.

If the DTC is present please follow step under Service. Reported symptoms are: - Error message in DIM BECM = Battery Energy Control Module DIM = Driver Information Module Service: Perform an upgrade of the software according to TJ 31543.

This TJ is released to inform that a method is changed in VIDA regarding replacement of fuel low pressure sensor (LPS). There are two different methods in VIDA depending on version of fuel low pressure sensor (LPS), see attached document. The method in VIDA can be found if searching for VST operation 28405-2.

of the vehicle's Intellisafe systems. This graphic was removed from the software on May 12, 2017 due to some inaccuracies. Service: Affected software packages: - Total Upgrade - Service 2.0 - PDS (Pre-Delivery Service) - VDDM_PBL (Vehicle Dynamics Domain Master Primary Bootloader) - DIM Upgrade or Reload Any vehicle that received one of the software packages listed above from May 8th, 2017 to May 11th, 2017 will have received the DIM graphic. From May 12th, 2017 and on, if any of the software packages listed above are loaded to a car that has received the new graphic, it will be removed. Vehicles built from structure week 2017w17 to 2017w22 will have the graphic in the car from the factory but it will be removed when any of the software packages listed are loaded. Do NOT replace, reload or upgrade any components for customer complaints of this function missing. This function will be re-added to the DIM software at a later date that is to be determined.

harness can be repaired according to the method in VIDA under Bulletins/ Product fix/Special tools Bulletins/3 Electrical/ 371 Cables.

service required?displayed in DIM, then it is possible that thereis wateringress into rear park assist sensors andconnectors caused by splices in the rear cableharness. If the sensors and connectors have wateringress then follow method in VIDA

The clampingforce on the bracket in the lower grill may betoo low.Service: In case of customer complaints of a loose parkassist sensor bracket, follow the instruction to assemble a foam block on the bracket toincrease the clamping force.

The VIDA test is stillavailable but no longer required. For battery replacements under warranty, thecode generated by the BT3300 must bemanually copied into the repair order text. Itmust also be printed and attached to the hardcopy of the repair order.

may be noticed at a VIDA readout. Noreported customer symptoms. Ignore the DTC,work is ongoing to find the root cause.

Access by using the applicable URL.

DIAGNOSTICTROUBLE CODE (DTC) MAY BE SET INDICATING AN INTERNAL ISOLATION FAULT THAT WILL RENDER THE IGMINOPERABLE.THE CORRECTIVE ACTION IS TO CHECK THEVEHICLES IGM SERIAL NUMBER AGAINST THEATTACHED IGM HOUSING SERIAL NUMBERS LIST. IF THE LABEL NUMBER FOR THE VEHICLES IGM IS LISTEDIN THE IGM HOUSING SERIAL NUMBER LIST, REPLACE THE IGM. IF THE LABEL NUMBER FROM THE VEHICLES IGM IS NOT ON THE LIST, NO FURTHER ACTION IS NECESSARY.

DIAGNOSTICTROUBLE CODE (DTC) MAY BE SET INDICATING AN INTERNAL ISOLATION FAULT THAT WILL RENDER THE IGMINOPERABLE.THE CORRECTIVE ACTION IS TO CHECK THEVEHICLES IGM SERIAL NUMBER AGAINST THEATTACHED IGM HOUSING SERIAL NUMBERS LIST. IF THE LABEL NUMBER FOR THE VEHICLES IGM IS LISTEDIN THE IGM HOUSING SERIAL NUMBER LIST, REPLACE THE IGM. IF THE LABEL NUMBER FROM THE VEHICLES IGM IS NOT ON THE LIST, NO FURTHER ACTION IS NECESSARY.

DIAGNOSTICTROUBLE CODE (DTC) MAY BE SET INDICATING AN INTERNAL ISOLATION FAULT THAT WILL RENDER THE IGMINOPERABLE.THE CORRECTIVE ACTION IS TO CHECK THEVEHICLES IGM SERIAL NUMBER AGAINST THEATTACHED IGM HOUSING SERIAL NUMBERS LIST. IF THE LABEL NUMBER FOR THE VEHICLES IGM IS LISTEDIN THE IGM HOUSING SERIAL NUMBER LIST, REPLACE THE IGM. IF THE LABEL NUMBER FROM THE VEHICLES IGM IS NOT ON THE LIST, NO FURTHER ACTION IS NECESSARY.

IF THE DTC IS PRESENT AND THE VEHICLE IS, OR CANBE ASSUMED TO HAVE BEEN IN TRANSPORT MODEWHEN THE DTC WAS SET, MAKE SURE THAT THEVEHICLE IS IN NORMAL MODE, I.E. NOT IN TRANSPORTMODE. ERASE THE DTC AND PERFORM A TEST DRIVE.IF THE DTC RETURNS, START FAULT TRACING ACCORDINGTO VIDA. IF THE DTC DOES NOT RETURN, IT CAN BE IGNORED.

WILL BE INSTRUCTED TO REPLACE AND SHIP A DEFECTIVE LITHIUM HYBRID BATTERY DIRECTLY TO OUR SUPPLIER OR THE TMA DEPARTMENT FOR TECHNICAL EVALUATION.

Download software.

This symptom can occur if the driver changes the position of the gear shifter from P to D or R very quickly after starting the engine and the starting process is not completed. Inform the driver to pause briefly after starting the vehicle before shifting into D or R.

VGT, TC) And US17+OBD22 (11L) Emissions

The ERAD (Electrical Rear Axle Drive) consists of two main parts, a transmission and an electrical motor. To determine if the transmission or the complete ERAD needs to be exchanged follow instructions under "Service". Instructional film is included as attachment, mp4. The repair method is included as attachment, pdf. Service: If the customer is driving in electric mode and experiences noise from the rear that increase with vehicle speed (that corresponds to the electrical motor speed) it is an electrical motor issue. In this case the complete ERAD is to be exchanged. No DTC(s) are set for this issue. If the customer experiences hesitation when the electrical motor should be engaged or no electrical motor engagement at all, the transmission part needs to be exchanged. This fault results in Clutch DTC(s) as indicated in the list, and a message in DIM (Driver Information Module) "Hybrid system failure, Service required". ERAD transmission is ordered according to normal routines. ERAD transmission Part No. 32240142.

Make sure that the sound is coming from the engine pad, NOT from the drive shaft. Remove the left engine pad and split by removing the small screw. Lubricate with graphite grease (PN 1161851) on points as in attachment. Torque for small screw is 8 nm.

Make sure that the sound is coming from the engine pad, NOT from the drive shaft. Remove the left engine pad and split by removing the small screw. Lubricate with graphite grease (PN 1161851) on points as in attachment. Torque for small screw is 8 nm.

Make sure that the sound is coming from the engine pad, NOT from the drive shaft. Remove the left engine pad and split by removing the small screw. Lubricate with graphite grease (PN 1161851) on points as in attachment. Torque for small screw is 8 nm.

Action S29987 on certain model year 2018 - 2020 S60T8, V60T8, S90T8, XC60T8, XC90T8 vehicles. Volvo has identified that the Engine Control Module (ECM) may not correctly monitor the coolant thermostat (between 20 to 60 degrees Celsius). This condition can result in increased vehicle emissions and non-compliance with On Board Diagnostics (OBD) II requirements. The corrective action is a Total Upgrade.

( see attached sample files ). The sound may come from the balance shaft which is fitted in the oil sump area where the noise is most concentrated. A new design of the balance shaft is planned to be introduced 2018-Q2. Replace the balance shaft according the instructions in VIDA. Note: It's extremely important to adjust the new balance shaft with the correct tools according the instructions otherwise the sound may occur again in a short mileage.

Volvo Car USA LLC and Volvo Car of Canada Ltd (Volvo) on behalf of Volvo Car Corporation, has decided to launch Service Action S39820 on certain model year 2016 ? 2017 XC90 T8 Hybrid vehicles. Volvo has identified that the remote start functionality may be missing. The corrective action is to download Engine Remote Start Application 31678916.

Driving/Poor performance/lacks power Do not replace any parts as this is identified as a software issue. New software will be available week 16, 2017. Until solution is available, the temporary solution is to reset the DTC and inform the customer that the software solution is on its way.

Volvo Car USA LLC and Volvo Car of Canada Ltd (Volvo) on behalf of Volvo Car Corporation, has decided to launch Service Action S39820 on certain model year 2016 ? 2017 XC90 T8 Hybrid vehicles. Volvo has identified that the remote start functionality may be missing. The corrective action is to download Engine Remote Start Application 31678916.

Download engine remote start application

Driving/Poor performance/lacks power Do not replace any parts as this is identified as a software issue. New software will be available week 16, 2017. Until solution is available, the temporary solution is to reset the DTC and inform the customer that the software solution is on its way.

Campaign S39839 on certain model year 2016 - 2017 XC90 T8 vehicles. Volvo has identified that if the Inverter Generator Module (IGM) is exposed to high temperatures and vibration, a Diagnostic Trouble Code (DTC) may be set indicating an internal isolation fault that will render the IGM inoperable. If this condition occurs while driving, the gasoline engine will start if it is not already running, and the driver will receive a warning message in the Driver Information Module (DIM). The corrective action is to replace the IGM.

Campaign S39839 on certain model year 2016 - 2017 XC90 T8 vehicles. Volvo has identified that if the Inverter Generator Module (IGM) is exposed to high temperatures and vibration, a Diagnostic Trouble Code (DTC) may be set indicating an internal isolation fault that will render the IGM inoperable. If this condition occurs while driving, the gasoline engine will start if it is not already running, and the driver will receive a warning message in the Driver Information Module (DIM). The corrective action is to replace the IGM.

VCM software release can cause any or all of the above symptoms. *The current solution is to install VCM repair software by following the procedure below: 1. Perform a Total Upgrade according to TJ 31543 to bring all vehicle nodes to the latest software status. The Upgrades list in VIDA should be empty before proceeding. *2. Download the appropriate SP below to prevent the above symptoms and re-enable ERS XC90: SP 31676890, CMQ VCM Fix S90: SP 31676891, CMQ VCM Fix 3. Drive the vehicle over 20mph to release the VCM from diagnostic mode. ERS will be unavailable until this is done. 4. Close and lock the vehicle for 3+ minutes to allow the network to shut down before testing ERS. PLEASE NOTE - DO NOT perform a Total Upgrade or VCM Upgrade after performing this procedure (they will now appear in the Upgrades list). Doing so will re-install the affected software. - Not all battery drains are caused by this issue. *The repair software will be integrated with regular VCM Upgrade/Reload and Total Upgrade/PDS/Service 2.0 packages in the coming weeks *This TJ will be updated when the updated software packages are available.

VCM software release can cause any or all of the above symptoms. *The current solution is to install VCM repair software by following the procedure below: 1. Perform a Total Upgrade according to TJ 31543 to bring all vehicle nodes to the latest software status. The Upgrades list in VIDA should be empty before proceeding. *2. Download the appropriate SP below to prevent the above symptoms and re-enable ERS XC90: SP 31676890, CMQ VCM Fix S90: SP 31676891, CMQ VCM Fix 3. Drive the vehicle over 20mph to release the VCM from diagnostic mode. ERS will be unavailable until this is done. 4. Close and lock the vehicle for 3+ minutes to allow the network to shut down before testing ERS. PLEASE NOTE - DO NOT perform a Total Upgrade or VCM Upgrade after performing this procedure (they will now appear in the Upgrades list). Doing so will re-install the affected software. - Not all battery drains are caused by this issue. *The repair software will be integrated with regular VCM Upgrade/Reload and Total Upgrade/PDS/Service 2.0 packages in the coming weeks *This TJ will be updated when the updated software packages are available.

front suspension when driving on rough roads or over a road hump, then follow the advice under Service.

VCM software release can cause any or all of the above symptoms. *The current solution is to install VCM repair software by following the procedure below: 1. Perform a Total Upgrade according to TJ 31543 to bring all vehicle nodes to the latest software status. The Upgrades list in VIDA should be empty before proceeding. *2. Download the appropriate SP below to prevent the above symptoms and re-enable ERS XC90: SP 31676890, CMQ VCM Fix S90: SP 31676891, CMQ VCM Fix 3. Drive the vehicle over 20mph to release the VCM from diagnostic mode. ERS will be unavailable until this is done. 4. Close and lock the vehicle for 3+ minutes to allow the network to shut down before testing ERS. PLEASE NOTE - DO NOT perform a Total Upgrade or VCM Upgrade after performing this procedure (they will now appear in the Upgrades list). Doing so will re-install the affected software. - Not all battery drains are caused by this issue. *The repair software will be integrated with regular VCM Upgrade/Reload and Total Upgrade/PDS/Service 2.0 packages in the coming weeks *This TJ will be updated when the updated software packages are available.

VCM software release can cause any or all of the above symptoms. *The current solution is to install VCM repair software by following the procedure below: 1. Perform a Total Upgrade according to TJ 31543 to bring all vehicle nodes to the latest software status. The Upgrades list in VIDA should be empty before proceeding. *2. Download the appropriate SP below to prevent the above symptoms and re-enable ERS XC90: SP 31676890, CMQ VCM Fix S90: SP 31676891, CMQ VCM Fix 3. Drive the vehicle over 20mph to release the VCM from diagnostic mode. ERS will be unavailable until this is done. 4. Close and lock the vehicle for 3+ minutes to allow the network to shut down before testing ERS. PLEASE NOTE - DO NOT perform a Total Upgrade or VCM Upgrade after performing this procedure (they will now appear in the Upgrades list). Doing so will re-install the affected software. - Not all battery drains are caused by this issue. *The repair software will be integrated with regular VCM Upgrade/Reload and Total Upgrade/PDS/Service 2.0 packages in the coming weeks *This TJ will be updated when the updated software packages are available.

front suspension when driving on rough roads or over a road hump, then follow the advice under Service.

The Check Engine light may be illuminated without any other customer symptoms. Perform Total Upgrade according to TJ 31543.

passenger compartment due to incorrect installation during vehicle assembly. If this condition should occur, it may result in moisture inside the passenger compartment, which could lead to air conditioning functionality issues. If the leakage has not been detected over a period of time, this condition could affect SRS systems (airbag), engine management systems etc. In such a case, the driver may experience various warning messages displayed in the Driver Information Module (DIM) identifying that a fault may be present and also providing guidance on how to proceed. Volvo therefore considers this a potential safety risk over time.

Customer may experience a high fan speed noise regardless of the fan speed selection. This may be due to accidentally touching the 2nd row display. A new logic in the CCM software was implemented 2016w46, that allows rear climate display to start in default mode 72/72 Auto with fan level 2. This will take place after every restart of engine. Service: Perform Total Upgrade according to TJ-31543.

front suspension when driving on rough roads or over a road hump, then follow the advice under Service.

front suspension when driving on rough roads or over a road hump, then follow the advice under Service.

balancing Diagnostic Trouble Code (DTC) is set in the BECM, follow advice under "Service". Service: Revised BECM SW has been released. Perform an upgrade of the software according to TJ 31543.

To protect the throttle housing when using Volvo Car Showmode kit in the specified cars, always remove the connector from the throttle housing (see picture 34206.jpg) A new software for the BRIGO device is under development to avoid this damage. Make sure that the BRIGO device always updated with the latest software.

To protect the throttle housing when using Volvo Car Showmode kit in the specified cars, always remove the connector from the throttle housing (see picture 34206.jpg) A new software for the BRIGO device is under development to avoid this damage. Make sure that the BRIGO device always updated with the latest software.

Do not replace any parts for these cases. A new software for the ECM (engine control module) is under development and is planned to be released Q4-2018

balancing Diagnostic Trouble Code (DTC) is set in the BECM, follow advice under "Service". Service: Revised BECM SW has been released. Perform an upgrade of the software according to TJ 31543.

Make sure that the sound is coming from the engine pad, NOT from the drive shaft. Remove the left engine pad and split by removing the small screw. Lubricate with graphite grease (PN 1161851) on points as in attachment. Torque for small screw is 8 nm.

Make sure that the sound is coming from the engine pad, NOT from the drive shaft. Remove the left engine pad and split by removing the small screw. Lubricate with graphite grease (PN 1161851) on points as in attachment. Torque for small screw is 8 nm.

If the vehicle is equipped with air suspension and if customer is complaining over a knock/rattle/clatter noise from the front suspension when driving on roughroads or over a road hump, then follow the advice under Service. Note: Vehicles with Air suspension can be identified by the following VDN code: RI03 Service: Too high tire pressure could produce noise that could be misinterpreted as noise from the front air suspension system. First ensure that the tire pressure is matching the Correct tire pressure, refer to the Tire Label (located in left side B-pillar) or Owners Manual. It is required that workshop test drive the vehicle with Correct tire pressure in order to verify the customers complaints regarding unacceptable noise from the front suspension. If the noise is confirmed, replace front shock absorbers according to TJ Instruction VCC-503532-2 (see also movie, special tool 9997644_v3.mp4) and perform a SUM upgrade. Note:The Hose coupling (31429025) should be used as a tool when filling the shock absorber during reassembly, should be reused.

ISSUING DEPARTMENT : CAR MARKET : United States and Canada TJ 19245 Technical Service PARTNER : ISSUE DATE : 3 US 7510 Volvo Cars North America YEAR MONTH DAY 2014 02 06 FUNC GROUP : FUNC DESC : 0 Publications Page 1 of 3 Attachment Vehicle Type Eng Struc Week Type Eng Sales Body Gear Steer Model Year Plant Chassis range Desc Range XXX 1927 - 9999 0000001 - 0999999 0 - 0 CSC Customer Symptom Codes Code Description 1C Administrative and Factory scheduled maintenance/Administrative and Factory scheduled maintenance DTC Diagnostic Trouble Codes Rows beginning with * are modified Note ! If using a printed copy of this Technical Journal, first check for the latest online version. Text In our Service Literature, a vehicle is often referred to by its ?type ?, not its ?model ?. For example the 1999 - 2006 Model Year S80 is type ?184? You may also see the designation, for example ?P2X?. This is referring to a platform type or vehicle family. If a document states ?P1X? or ?5XX? as an example, it will apply to all models within the platform type. ?54X? will apply to the ?544?, ?545? and ?542? models. ?X? represents variable data. ?Right first time in Time? Produced in the USA and available as an electronic document . Hard copy documents are printed in USA on recycled paper containing a minimum of 50% wastepaper and 10% post - consumer waste . 014 VOLVO CARS OF NORTH AMERICA, LLC Technical Journal 19245 Platform Model Type Model Years Comments P3 S80 124 2007 - V70 135 2008 - 2010 XC70 136 2008 - XC60 156 2010 - S60 134 2011 - V60 155 2015 - P2 S80 184 1999 - 2006 V70 285 2001 - 2007 XC70 295 2001 - 2007 S60 384 2001 - 2009 XC90 275 2003 - P1 S40 544 2004 - 2012 V50 545 2005 - 2012 C30 533 2007 - 2013 C70 542 2006 - 2013 X40 S40 644 2000 - 2004 V40 645 2000 - 2004 900 940 944 1991 - 1995 four cylinder, four door 940

code BECM-P0CE100 is read out with VIDA. Please follow the advice under Service. BECM = Battery Electronic Control Module * Perform an upgrade of the software according to TJ 31543.

If the vehicle is equipped with air suspension and if customer is complaining over a knock/rattle/clatter noise from the front suspension when driving on roughroads or over a road hump, then follow the advice under Service. Note: Vehicles with Air suspension can be identified by the following VDN code: RI03 Service: Too high tire pressure could produce noise that could be misinterpreted as noise from the front air suspension system. First ensure that the tire pressure is matching the Correct tire pressure, refer to the Tire Label (located in left side B-pillar) or Owners Manual. It is required that workshop test drive the vehicle with Correct tire pressure in order to verify the customers complaints regarding unacceptable noise from the front suspension. If the noise is confirmed, replace front shock absorbers according to TJ Instruction VCC-503532-2 (see also movie, special tool 9997644_v3.mp4) and perform a SUM upgrade. Note:The Hose coupling (31429025) should be used as a tool when filling the shock absorber during reassembly, should be reused.

( see attached sample files ). The sound may come from the balance shaft which is fitted in the oil sump area where the noise is most concentrated. A new design of the balance shaft is planned to be introduced 2018-Q2. Replace the balance shaft according the instructions in VIDA. Note: It's extremely important to adjust the new balance shaft with the correct tools according the instructions otherwise the sound may occur again in a short mileage.

( see attached sample files ). The sound may come from the balance shaft which is fitted in the oil sump area where the noise is most concentrated. A new design of the balance shaft is planned to be introduced 2018-Q2. Replace the balance shaft according the instructions in VIDA. Note: It's extremely important to adjust the new balance shaft with the correct tools according the instructions otherwise the sound may occur again in a short mileage.

code BECM-P0CE100 is read out with VIDA. Please follow the advice under Service. BECM = Battery Electronic Control Module * Perform an upgrade of the software according to TJ 31543.

Volvo Car USA LLC and Volvo Car of Canada Ltd (Volvo) on behalf of Volvo Car Corporation, has decided to launch Service Action S39820 on certain model year 2016 ? 2017 XC90 T8 Hybrid vehicles. Volvo has identified that the remote start functionality may be missing. The corrective action is to download Engine Remote Start Application 31678916.

high performance.Castrol EDGE Professional?s outstandingperformance has made it the oil of choice forVolvo and is the only Volvo recommendedengine oil.

Service: *See guide updated Oct. 12, 2016 for relevant P5/SPA Software Download information: P5_SPA_SW_Guide.pdf See VIDA Software tab for all other vehicles.The attached checklists can be used for restoring customer settings, where applicable.

The corrective action is to perform a VDDM PBL software upgrade

Service: *See guide updated Oct. 12, 2016 for relevant P5/SPA Software Download information: P5_SPA_SW_Guide.pdf See VIDA Software tab for all other vehicles.The attached checklists can be used for restoring customer settings, where applicable.

This is software related, please do not perform any repairs at this time. Investigation is ongoing, this TJ will be updated when more information is available

This is software related, please do not perform any repairs at this time. Investigation is ongoing, this TJ will be updated when more information is available.

If you receive this error message during a software download, use the Advanced Test function in the VIDA Software tab to read out the part number and serial number of the IHU. If the IHU indicates part number "0" and serial number "0000FFFFFFFF" the IHU must be replaced.

Service: *See guide updated Oct. 12, 2016 for relevant P5/SPA Software Download information: P5_SPA_SW_Guide.pdf See VIDA Software tab for all other vehicles.The attached checklists can be used for restoring customer settings, where applicable.

(full turn and acceleration), then follow advice under service. Download Total Upgrade software

customers, so that their cars give them the best experience possible . As of May 13th, 2019, when the software in your customer's vehicle is updated via Service 2.0 or Total Upgrade (TJ 31543), the customer will have access to the functions and improvements

customers, so that their cars give them the best experience possible . As of May 13th, 2019, when the software in your customer's vehicle is updated via Service 2.0 or Total Upgrade (TJ 31543), the customer will have access to the functions and improvements

Service: *See guide updated Oct. 12, 2016 for relevant P5/SPA Software Download information: P5_SPA_SW_Guide.pdf See VIDA Software tab for all other vehicles.The attached checklists can be used for restoring customer settings, where applicable.

Service: *See guide updated Oct. 12, 2016 for relevant P5/SPA Software Download information: P5_SPA_SW_Guide.pdf See VIDA Software tab for all other vehicles.The attached checklists can be used for restoring customer settings, where applicable.

release, will reset the sound settings back to default settings on the MY 2016 - 2018 vehicles listed above. The new software packages contain updated IHU software that will reset all customer sound settings such as treble, bass, balance and equalizer settings which will go back to default settings after the upgrade. For reference, please see attached example picture Sound.jpg. This applies to ALL driver profiles saved in the IHU. The VIDA IHU Diagnostic Sequences for Enabling the Export profile to USB menu will function after this upgrade.

Service: *See guide updated Oct. 12, 2016 for relevant P5/SPA Software Download information: P5_SPA_SW_Guide.pdf See VIDA Software tab for all other vehicles.The attached checklists can be used for restoring customer settings, where applicable.

(full turn and acceleration), then follow advice under service. Download Total Upgrade software

(full turn and acceleration), then follow advice under service. Download Total Upgrade software

"PDS" Pre-Delivery Service

If there is a problem loading software to a car equipped with a CD player, follow the instructions in TJ 31360

With this message, it will not be possible to purchase Software Products. "124 - Client ID is not registered"

FOLLOW INSTRUCTIONS PROVIDED FOR PROPER SOFTWARE DOWNLOADS BY YEAR AND MODEL.

Listed below are the latest planned owner notification re-mails. Please refer to SMB 00-323 and SMB 00-323A for information on how and where to find the related Service Action documents in VRC2 and TIE.

The WRCP is used to gauge individual retailer performance on objective measures over time. By setting clear performance expectations and parameters and assisting retailers in focusing on individual processes and procedures, all retailers are provided with adequate tools to help achieve the ultimate goal of qualifying for self-authorization status.

Improving Service Action/Recall scheduling.

Independent Repairers and customers throughout the United States and Canada by providing easy order-access to service, parts and owners? literature over the Internet.

? Vehicle inspection procedure (Truck Delivery) ? Pre-Delivery Service (PDS) ? Vehicle in stock maintenance ? Vehicle Delivery (Customer Delivery) New car delivery is a crucial step in the Retail Car Delivery Process. At this point the buying experience turns into a long-term relationship. It is the retailer?s responsibility to ensure that the car and the experience are as enjoyable and informative as possible.

dealer by providing a specific diagnostic labor operation. This will aid the Warranty Administrator when claiming reimbursement for diagnostic labor while not adversely affecting the dealers General Operation Index.

Add felt tape on the top half of the striker pins, according to attached files. * Use new tape, (Service kit) p/n 31447976.

Claims submitted for map upgrades will be debited

This bulletin is a list of equipment recommended by Volvo to it's dealer or any shop maintaining or repairing Volvo's. The equipment can be provided by Volvo's equipment supplier

This bulletin is a list of equipment recommended by Volvo to it's dealer or any shop maintaining or repairing Volvo's. The equipment can be provided by Volvo's equipment supplier

This bulletin is a list of equipment recommended by Volvo to it's dealer or any shop maintaining or repairing Volvo's. The equipment can be provided by Volvo's equipment supplier

Add felt tape on the top half of the striker pins, according to attached files. * Use new tape, (Service kit) p/n 31447976.

By setting clear performance expectations and parameters and assisting retailers in focusing on individual processes and procedures, all retailers are provided with adequate tools to help achieve the ultimate goal of qualifying for self authorization status.

VIDA will run slow after some time. VIDA might freeze. Certain operations might stop working.In order to release stored session memory, restart VIDA as needed throughout the day in order to minimize the risk to experience above symptoms.

Front door decor panel, noise. if a noise is heard, tighten the screw slow and gently.

If the analysis shows that the rattling noise comes from the roller blind, similar to the noise in the attached file, replace the roller blind according to VIDA.

If the analysis shows that the rattling noise comes from the roller blind, similar to the noise in the attached file, replace the roller blind according to VIDA.

If the analysis shows that the rattling noise comes from the roller blind, similar to the noise in the attached file, replace the roller blind according to VIDA.

If the analysis shows that the rattling noise comes from the roller blind, similar to the noise in the attached file, replace the roller blind according to VIDA.

If the analysis shows that the rattling noise comes from the roller blind, similar to the noise in the attached file, replace the roller blind according to VIDA.

Will only be performed at 20k

Apply grease P/N 31437986

Water may come out of the lower edge of the rear doors when opening the rear doors. remove weather strip and add sealing tape

Water may come out of the lower edge of the rear doors when opening the rear doors. remove weather strip and add sealing tape

Volvo Car Corporation, has decided to launch Service Campaign S89807 on certain model year 2016 ? 2017 XC90 and S90 vehicles. Volvo has identified the painted surface under the exterior door handles may become scratched by the handles. The corrective action is add tape under all four (4) exterior door handles

Volvo Car Corporation, has decided to launch Service Campaign S89807 on certain model year 2016 ? 2017 XC90 and S90 vehicles. Volvo has identified the painted surface under the exterior door handles may become scratched by the handles. The corrective action is add tape under all four (4) exterior door handles

Water may come out of the lower edge of the rear doors when opening the rear doors. remove weather strip and add sealing tape

Water may come out of the lower edge of the rear doors when opening the rear doors. remove weather strip and add sealing tape

MONTH DAY BULLETIN 2012 02 02 Take Your Special Tool Storage to the Next Level Maintain Your Parts & Service Department Efficiency , Organization and Productivity with the Volvo Special Service Tool Cabinet from Stanley Vidmar ! System includes ( 3 ) Stanley Vidmar Modular drawer cabinets with partitions , dividers and lock , ( 2 ) overhead shelf door cabinets with one shelf and lock ; designed to store Volvo Special Service Tools . Features ? Three - cabinet system with two overhead storage cabinets . ? 38 drawers with compartments . ? Exceptional tool organization with dedicated compartments , partitions and dividers . ? All cabinets are lockable . ? All steel construction . ? Drawers rated at 400 lbs . capacity fully loaded and extended . ? Drawer cabinets have pallet base included . ? Allows cabinets to be moved fully loaded and as your needs change . ? Tool locator sheets and index provided for placement of 600 tools in drawers and overhead cabinets . Technical Weight approx . ( lbs ) 2400 554 - VOLVO - SPL Color Volvo Blue Volvo Special Tool Cabinet Power supply ( V / Hz / A ) None Dimensions ( L x W x H ) 90 " x 27 - 3 / 4 " x 90 " Dealer Price $ 7,292 To Order Call 800 - 345 - 3399 or visit Volvodealersolutions.com today ! Promo # VO12 - 11 All Product Sold F.O.B . Shipping Point Pricing effective through June 30 , 2012 " Fixed Right ? First Time " SERVICE TECHNICIANS SERVICE PARTS WORKSHOP Service MANAGER MANAGER FOREMAN Personnel : read and initial . 2012 Volvo Cars of North America , LLC Printed in USA on recycled paper containing a minimum of 50 % wastepaper and 10 % post - consumer waste

Remove weather strip add tape and install new weather strip.

doors.

Only vehicles with non-laminated glass can beaffected. Add a felt tape P/N 30788314 (max 2 mm thickness) on the front door glass runchannel according to service instruction.

The pop-up window example, in the attachment, will be shown 14 days prior to the expiraton date. When this occurs, please change the password as soon as possible, in order to prevent from being locked out.

If the steel clips on the new deco panel areblack, remove the steel clip It will sit tightwith the remaining clips. The hole will beadjusted in production to align better with theclip. (The metal colored, old type of clips hasless precision and therefore fits in the hole.)

Radial force variation ( RFV ) is a condition where excessive run out will create the same symptom as an unbalanced tire. Tire balancing should be checked and corrected as needed but is not always the solution. Road Force balancing detects assembly run out measured under load simulating real world driving conditions and will provide a solution to match mount the tire and rim to minimize loaded run out.

If TPMS warning symbol is flashing in DIM with a "TPMS Service Required" message, then follow advice under Service

Before carrying out this TJ, always start with TJ 20803 to sort out if the problem is related to driveline or wheels.

Before carrying out this TJ, always start with TJ 20803 to sort out if the problem is related to driveline or wheels.

If the slider button is missing or damaged, there is no need to replace the entire remote control. Install a new slider button (31419983) according to the attached instruction.

stamping, name and size.

stamping, name and size.

stamping, name and size.

Before carrying out this TJ, always start with TJ 20803 to sort out if the problem is related to driveline or wheels.

stamping, name and size.

be prepared for these issues.

Radial force variation ( RFV ) is a condition where excessive run out will create the same symptom as an unbalanced tire. Tire balancing should be checked and corrected as needed but is not always the solution. Road Force balancing detects assembly run out measured under load simulating real world driving conditions and will provide a solution to match mount the tire and rim to minimize loaded run out.

stamping, name and size.

be prepared for these issues.

Radial force variation ( RFV ) is a condition where excessive run out will create the same symptom as an unbalanced tire. Tire balancing should be checked and corrected as needed but is not always the solution. Road Force balancing detects assembly run out measured under load simulating real world driving conditions and will provide a solution to match mount the tire and rim to minimize loaded run out.

stamping, name and size.

stamping, name and size.

Before carrying out this TJ, always start with TJ 20803 to sort out if the problem is related to driveline or wheels.

Before carrying out this TJ, always start with TJ 20803 to sort out if the problem is related to driveline or wheels.

Before carrying out this TJ, always start with TJ 20803 to sort out if the problem is related to driveline or wheels.

Before carrying out this TJ, always start with TJ 20803 to sort out if the problem is related to driveline or wheels.

Before carrying out this TJ, always start with TJ 20803 to sort out if the problem is related to driveline or wheels.

stamping, name and size.

changed from MY2017 (structure week 2016 week 17).Now an Indirect TPMS system is being used (I-TPMS).The Direct TPMS system (D-TPMS) that was used in XC90 MY 2016 is no longer used inproduction from MY 2017.

Replace front brake pads

Download the available total upgrade software.

Perform software upgrade.

New brake pads have been implemented for service and production , 2015week34. 31471266 Comfort brake pads, only for cars with VDN code RC02 An improved rear brake disc with changed composition is planned to be available in the end of June 2016, For cars built before chassis number 22196, replace rear brake pads according to VIDA. For cars built after chassis number 22196 or are already have the latest brake pads, try to hold the repair until the new rear brake disc is available.

Add new sealing on the HWAS box (Humidity Water Air Separator) and secure assembly of the box according to attached instruction.

then Replace front discs according to VIDA, the new brake discs have changed metal composition in order to reduce squealing noise. Also replace front brake pads if vehicle is built before 15w19, or after 15w20 if the brake pads are worn down or there has been a previous attempt to grease or chamfer the pads to repair the car.

New brake pads have been implemented for service and production , 2015week34. 31471266 Comfort brake pads, only for cars with VDN code RC02 An improved rear brake disc with changed composition is planned to be available in the end of June 2016, For cars built before chassis number 22196, replace rear brake pads according to VIDA. For cars built after chassis number 22196 or are already have the latest brake pads, try to hold the repair until the new rear brake disc is available.

then Replace front discs according to VIDA, the new brake discs have changed metal composition in order to reduce squealing noise. Also replace front brake pads if vehicle is built before 15w19, or after 15w20 if the brake pads are worn down or there has been a previous attempt to grease or chamfer the pads to repair the car.

New brake pads have been implemented for service and production , 2015week34. 31471266 Comfort brake pads, only for cars with VDN code RC02 An improved rear brake disc with changed composition is planned to be available in the end of June 2016, For cars built before chassis number 22196, replace rear brake pads according to VIDA. For cars built after chassis number 22196 or are already have the latest brake pads, try to hold the repair until the new rear brake disc is available.

(customer behavoiur information) of a car is required from Volvo Car Corporation from external sources, either of these two documents should be filled in and attached to the affected Vehicle Report. (External sources: Authority, Insurance companies, Rental companies, etc)

then Replace front discs according to VIDA, the new brake discs have changed metal composition in order to reduce squealing noise. Also replace front brake pads if vehicle is built before 15w19, or after 15w20 if the brake pads are worn down or there has been a previous attempt to grease or chamfer the pads to repair the car.

Add new sealing on the HWAS box (Humidity Water Air Separator) and secure assembly of the box according to attached instruction.

If squealing noise occur from rear brakes 17" at low speed, follow advice under service. If symptom is confirmed, follow advice in VIDA regarding greasing method when changing the brake pads.

guideline has been developed, as an overview of the brake noise and indicates possible faults/solutions.

then Replace front discs according to VIDA, the new brake discs have changed metal composition in order to reduce squealing noise. Also replace front brake pads if vehicle is built before 15w19, or after 15w20 if the brake pads are worn down or there has been a previous attempt to grease or chamfer the pads to repair the car.

(customer behavoiur information) of a car is required from Volvo Car Corporation from external sources, either of these two documents should be filled in and attached to the affected Vehicle Report. (External sources: Authority, Insurance companies, Rental companies, etc)

If squealing noise occur from rear brakes 17" at low speed, follow advice under service. If symptom is confirmed, follow advice in VIDA regarding greasing method when changing the brake pads.

then Replace front discs according to VIDA, the new brake discs have changed metal composition in order to reduce squealing noise. Also replace front brake pads if vehicle is built before 15w19, or after 15w20 if the brake pads are worn down or there has been a previous attempt to grease or chamfer the pads to repair the car.

(customer behavoiur information) of a car is required from Volvo Car Corporation from external sources, either of these two documents should be filled in and attached to the affected Vehicle Report. (External sources: Authority, Insurance companies, Rental companies, etc)

then Replace front discs according to VIDA, the new brake discs have changed metal composition in order to reduce squealing noise. Also replace front brake pads if vehicle is built before 15w19, or after 15w20 if the brake pads are worn down or there has been a previous attempt to grease or chamfer the pads to repair the car.

then Replace front discs according to VIDA, the new brake discs have changed metal composition in order to reduce squealing noise. Also replace front brake pads if vehicle is built before 15w19, or after 15w20 if the brake pads are worn down or there has been a previous attempt to grease or chamfer the pads to repair the car.

Service Note: These brakes can be identify by VDN: RK03 or RK05 If the symptom is confirmed, .New brake discs will be implemented 17w22 at the factory and will be available as a service solution on approximately 17w24.

New brake pads have been implemented forservice and production , 2015week34. 31471266 Comfort brake pads, only forcars with VDN code RC02An improved rear brake disc with changedcomposition is planned to be available in theend of June 2016,For cars built before chassis number 22196,replace rear brake pads according to VIDA. For cars built after chassis number 22196 orare already have the latest brake pads, tryto hold the repair until the new rear brakedisc is available.

Service Note: These brakes can be identify by VDN: RK03 or RK05 If the symptom is confirmed, .New brake discs will be implemented 17w22 at the factory and will be available as a service solution on approximately 17w24.

New brake pads have been implemented forservice and production , 2015week34. 31471266 Comfort brake pads, only forcars with VDN code RC02An improved rear brake disc with changedcomposition is planned to be available in theend of June 2016,For cars built before chassis number 22196,replace rear brake pads according to VIDA. For cars built after chassis number 22196 orare already have the latest brake pads, tryto hold the repair until the new rear brakedisc is available.

New brake pads have been implemented forservice and production , 2015week34. 31471266 Comfort brake pads, only forcars with VDN code RC02 An improved rear brake disc with changed composition is planned to be available in theend of June 2016,For cars built before chassis number 22196, replace rear brake pads according to VIDA. For cars built after chassis number 22196 orare already have the latest brake pads, tryto hold the repair until the new rear brakedisc is available.

New brake pads have been implemented for service and production , 2015week34. 31471266 Comfort brake pads, only for cars with VDN code RC02 An improved rear brake disc with changed composition is planned to be available in the end of June 2016, For cars built before chassis number 22196, replace rear brake pads according to VIDA. For cars built after chassis number 22196 or are already have the latest brake pads, try to hold the repair until the new rear brake disc is available.

vehicles exhibiting functionality issues with Apple CarPlay for certain model year 2016-2021 XC90 vehicles. The corrective action is to download a Total Software Upgrade.

the Centre Display for I-TPMS is showing a "spinning wheel", while calibration is ongoing. The calibration function itself is not changed compared to previous SW versions, it is only how it is presented in the center display that has been changed.A new calibration will start automatically as soon as the VDDM SW is upgraded.

Download software.

May 2017

When this happens the CCD and the center area of the DIM will go blank for a few moments and then start back up as if the vehicle has just been started up.

When this happens the CCD and the center area of the DIM will go blank for a few moments and then start back up as if the vehicle has just been started up.

When this happens the CCD and the center area of the DIM will go blank for a few moments and then start back up as if the vehicle has just been started up.

conditions, the height adjustment for the Head Up Display (HUD) returns to its default (full "up") setting at a vehicle restart.At this time, there is no permanent solution to this problem.

the Centre Display for I-TPMS is showing a "spinning wheel", while calibration is ongoing. The calibration function itself is not changed compared to previous SW versions, it is only how it is presented in the center display that has been changed.A new calibration will start automatically as soon as the VDDM SW is upgraded.

to objects that may shield radio communication between the remote control key and the car or could cause interference with they key signals..

to objects that may shield radio communication between the remote control key and the car or could cause interference with they key signals..

When this happens the CCD and the center area of the DIM will go blank for a few moments and then start back up as if the vehicle has just been started up.

When this happens the CCD and the center area of the DIM will go blank for a few moments and then start back up as if the vehicle has just been started up.

When this happens the CCD and the center area of the DIM will go blank for a few moments and then start back up as if the vehicle has just been started up.

follow the stepby step instructions. Going through thisprocess will ensure your customer continues toreceive their satellite radio programmingwithout any interruption of service. For SPAvehicles, the SiriusXM tuner is containedwithin the Infotainment Head Unit (IHU). Forall other vehicles, the tuner is the RemoteDigital Audio Receiver (RDAR).

THE NEW DISPLAY IS MORE RESISTANT TOSURFACE SCRATCHES. THE SCREEN PROTECTION FILM IS THEREFORE NOTSUPPLIED WITH THE VEHICLE FROM THE FACTORY FROM THE ABOVE CHASSIS BREAK POINTS. SERVICE: THE PROTECTIVE FILM IS NO LONGER SUPPLIED WITH THE VEHICLE FROM FACTORY AFTER CHASSIS BREAKPOINTS ABOVE AND MUST NOT BE CLAIMED UNDER WARRANTY. THE NEW CCD INTRODUCED FOR MY 2017 SUPERSEDES THE PREVIOUS CCD AS SPARE PART.

Complimentary Factory Scheduled Maintenance Program. Model Year 2013 and later vehicles, the service intervals are every 10,000 miles and ALL 2013 and later vehicles must use synthetic oil only.

Replace broken guide pin

Factory Scheduled Maintenance up to the first 3 years or 36,000 miles (whichever comes first) as recommended in the Volvo Warranty and Maintenance Information booklet.

At PDS and when attempting to diagnose a customer concern regarding voice controls not working or responding properly, make sure the vehicle has the latest voice control database installed.

At PDS and when attempting to diagnose a customer concern regarding voice controls not working or responding properly, make sure the vehicle has the latest voice control database installed.

your servicing distribution center.

then this could be caused by a HW problem in the Side Object Detection radar (SODL/SODR). In case of customer complaints for above symptom is confirmed, replace the SODL or SODR on the side for which the symptom is shown and download software SOD Reload.

the latest map upgrade for SPA vehicles (SPJ 29181) and must be downloaded separately from the maps. When performing PDS or diagnosing any voice control issue, always ensure that the latest speech database file is installed in the IHU.

Warranty GROUP : NO : ISSUING DEPARTMENT : CAR MARKET : Warranty Canada 00 342C REFERENCE BULLETINS : DATE : YEAR MONTH DAY SERVICE SERVICE WARRANTY 2015 09 18 MANAGER WRITER ADMINISTRATOR Service Personnel : Read and initial Page 1 of 4 VOLVO LIFETIME REPLACEMENT PARTS & LABOUR WARRANTY CUSTOMER OFFER To further enhance the Volvo ownership experience , Volvo Cars of Canada Corp . is offering the Volvo Lifetime Replacement Parts & Labour Warranty . Volvo warrants to the original retail purchaser of each new genuine Volvo replacement part ( excluding accessories and consumable parts as listed below ) that such part installed at an authorized Volvo retailer will be free from defects in material or workmanship . This would exclude any defects caused by outside influence . Coverage under the Lifetime Replacement Parts & Labour Warranty includes the labour to replace the covered replacement part . This warranty is nontransferable . COVERAGE Beginning with repairs dated on or after September 15 , 2015 , the original retail purchaser of a new genuine Volvo replacement part purchased and installed at an authorized Volvo retailer will be eligible for the Volvo Lifetime Replacement Parts & Labour Warranty . Parts and labour coverage under this Lifetime Warranty are only applicable when the new replacement part has been purchased and installed at an authorized Volvo retailer . Parts sold over the counter that are not installed by an authorized Volvo retailer are covered by Volvo?s one year parts only warranty . ? Right first time in Time ? Produced in the USA and available as an electronic document . Hard copy documents are printed in USA on recycled paper containing a minimum of 50 % wastepaper and 10 % post - consumer waste . 2015 VOLVO CARS OF NORTH AMERICA , LLC Service Manager Bulletin 00 - 342C As part of the vehicle?s normal service and maintenance

At PDS and when attempting to diagnose a customer concern regarding voice controls not working or responding properly, make sure the vehicle has the latest voice control database installed.

Download software fix

Download software fix

or 36,000 miles (whichever comes first) as recommended in the Volvo Warranty and Maintenance Information booklet.

and paid through the Volvo warranty system.

and paid through the Volvo warranty system.

At PDS and when attempting to diagnose a customer concern regarding voice controls not working or responding properly, make sure the vehicle has the latest voice control database installed.

At PDS and when attempting to diagnose a customer concern regarding voice controls not working or responding properly, make sure the vehicle has the latest voice control database installed.

Seat Belt Extender.

Replace seat belt.

Add adhesive tape.

Seat Belt Extender.

Replace seat belt.

Add adhesive tape.

Seat Belt Extender.

Volvo Car USA LLC and Volvo Car Canada LTD (Volvo) on behalf of Volvo Car Group has decided to launch Recall R89716 on certain model year 2017 XC90 vehicles with 7 seats. The crimping of the tube for the Micro Gas Generator (MGG) in the 3rd row passengers side seat belt retractor, was not manufactured to specification. In the event of a crash where the pre-tensioner is activated and in combination with certain conditions, the MGG squib may detach and be propelled out of the tube. If the MGG squib penetrates the inner side trim panel, it will lose most of its kinetic energy before it may enter the 3rd row occupant compartment. Despite this condition, the seat belt functions properly. The corrective action is to replace the 3rd row passenger?s side seatbelt retractor.

Seat Belt Extender.

Replace seat belt.

Replace seat belt.

Replace seat belt.

Volvo Car USA LLC and Volvo Car Canada LTD (Volvo) on behalf of Volvo Car Group has decided to launch Recall R89716 on certain model year 2017 XC90 vehicles with 7 seats. The crimping of the tube for the Micro Gas Generator (MGG) in the 3rd row passengers side seat belt retractor, was not manufactured to specification. In the event of a crash where the pre-tensioner is activated and in combination with certain conditions, the MGG squib may detach and be propelled out of the tube. If the MGG squib penetrates the inner side trim panel, it will lose most of its kinetic energy before it may enter the 3rd row occupant compartment. Despite this condition, the seat belt functions properly. The corrective action is to replace the 3rd row passenger?s side seatbelt retractor.

Volvo Car USA LLC and Volvo Car Canada LTD (Volvo) on behalf of Volvo Car Group has decided to launch Recall R89716 on certain model year 2017 XC90 vehicles with 7 seats. The crimping of the tube for the Micro Gas Generator (MGG) in the 3rd row passengers side seat belt retractor, was not manufactured to specification. In the event of a crash where the pre-tensioner is activated and in combination with certain conditions, the MGG squib may detach and be propelled out of the tube. If the MGG squib penetrates the inner side trim panel, it will lose most of its kinetic energy before it may enter the 3rd row occupant compartment. Despite this condition, the seat belt functions properly. The corrective action is to replace the 3rd row passenger?s side seatbelt retractor.

Replace seat belt.

DEPARTMENT : CAR MARKET : United States and Canada TJ 29012 Technical Service PARTNER : ISSUE DATE : 3 US 7510 Volvo Cars North America YEAR MONTH DAY 2015 06 26 FUNC GROUP : FUNC DESC : 8811 Instrument panel Page 1 of 3 Attachment File Name File Size Leather dashboard.jpg 1.2691 MB Vehicle Type Eng Struc Week Type Eng Sales Body Gear Steer Model Year Plant Chassis range Desc Range 124 2012 - 2015 0151101 - 0182120 201120 - 201402 136 2012 - 2015 0118101 - 0191314 201120 - 201402 156 2014 - 2015 0500127 - 0755266 201320 - 201416 542 2012 - 2013 0123001 - 0144301 201146 - 201325 CSC Customer Symptom Codes Code Description L9 Instrument panel / dashboard / Loose , poor fit , warped , wrinkled N2 Instrument panel / dashboard / Blistered / bubbled / peeled VST Operation Number VST Operation Number Description 88107 - 2 Dashboard replace . ? Right first time in Time ? Produced in the USA and available as an electronic document . Hard copy documents are printed in USA on recycled paper containing a minimum of 50 % wastepaper and 10 % post - consumer waste . 2015 VOLVO CARS OF NORTH AMERICA , LLC Technical Journal 29012 DTC Diagnostic Trouble Codes Rows beginning with * are modified Note ! If using a printed copy of this Technical Journal , first check for the latest online version . Text DESCRIPTION : Leather on dashboard may come loose on small areas . PRODUCT MODIFICATION : The amount of glue used for fastening the leather has been increased and * finetuned . Process has been optimized and more measurements introduced . MATERIAL RETURN : Material for analysis can be requested in Vehicle Report . In other cases , follow normal routines . Vehicle Report : When submitting a Vehicle Report for a condition described in this TJ , use concern area ? Vehicle Report and sub concern area ? Support Not Needed ? with function group 8811 . Service : I

CAR MARKET : United States and Canada TJ 30621 Technical Service PARTNER : ISSUE DATE : 3 US 7510 Volvo Cars North America YEAR MONTH DAY 2015 07 20 FUNC GROUP : FUNC DESC : 8360 Roof hatch Page 1 of 3 Attachment File Name File Size Movie clip 1 . mp4 5.3850 MB Movie clip 2 . mp4 5.4659 MB Vehicle Type Eng Struc Week Type Eng Sales Body Gear Steer Model Year Plant Chassis range Desc Range 256 2016 - 9999 21 0000001 - 9999999 201505 - 999952 CSC Customer Symptom Codes Code Description VJ Sun / moon / convertible roof / Fits poorly SC Sun / moon / convertible roof / Hard / impossible to open / close VST Operation Number VST Operation Number Description 83612 - 2 Sun shade / inner panel sun roof replace 99400 - 2 General reimbursement acc . to TJ / QB DTC Diagnostic Trouble Codes ? Right first time in Time ? Produced in the USA and available as an electronic document . Hard copy documents are printed in USA on recycled paper containing a minimum of 50 % wastepaper and 10 % post - consumer waste . 2015 VOLVO CARS OF NORTH AMERICA , LLC Technical Journal 30621 Text DESCRIPTION : If the sunroof shade is hanging down in the vehicle , follow advice under ? Service ? . The installation procedure in the VIDA removal , replacement and installation instructions for the Sun visor / Inner cover sun roof ( VCC - 371003 - 6 ) will be updated later . The two movie clips add this information meanwhile . Vehicle Report : Please submit a Vehicle Report of all cases with hanging sunroof shade . Use concern area ? Vehicle Report ? and sub concern area ? Support not needed ? , use function group 8360 . Service : 1 . Preparation of Sun visor / Inner cover sunroof spare part ( Movie clip 1 ) . After unpacking the spare part with P / N 39824859 ( Blonde ) or P / N 39824857 ( Charcoal ) please do the following steps : Note : Always use clean gloves when h

DEPARTMENT : CAR MARKET : United States and Canada TJ 29012 Technical Service PARTNER : ISSUE DATE : 3 US 7510 Volvo Cars North America YEAR MONTH DAY 2015 06 26 FUNC GROUP : FUNC DESC : 8811 Instrument panel Page 1 of 3 Attachment File Name File Size Leather dashboard.jpg 1.2691 MB Vehicle Type Eng Struc Week Type Eng Sales Body Gear Steer Model Year Plant Chassis range Desc Range 124 2012 - 2015 0151101 - 0182120 201120 - 201402 136 2012 - 2015 0118101 - 0191314 201120 - 201402 156 2014 - 2015 0500127 - 0755266 201320 - 201416 542 2012 - 2013 0123001 - 0144301 201146 - 201325 CSC Customer Symptom Codes Code Description L9 Instrument panel / dashboard / Loose , poor fit , warped , wrinkled N2 Instrument panel / dashboard / Blistered / bubbled / peeled VST Operation Number VST Operation Number Description 88107 - 2 Dashboard replace . ? Right first time in Time ? Produced in the USA and available as an electronic document . Hard copy documents are printed in USA on recycled paper containing a minimum of 50 % wastepaper and 10 % post - consumer waste . 2015 VOLVO CARS OF NORTH AMERICA , LLC Technical Journal 29012 DTC Diagnostic Trouble Codes Rows beginning with * are modified Note ! If using a printed copy of this Technical Journal , first check for the latest online version . Text DESCRIPTION : Leather on dashboard may come loose on small areas . PRODUCT MODIFICATION : The amount of glue used for fastening the leather has been increased and * finetuned . Process has been optimized and more measurements introduced . MATERIAL RETURN : Material for analysis can be requested in Vehicle Report . In other cases , follow normal routines . Vehicle Report : When submitting a Vehicle Report for a condition described in this TJ , use concern area ? Vehicle Report and sub concern area ? Support Not Needed ? with function group 8811 . Service : I

MARKET : United States and Canada TJ 25153 Technical Service PARTNER : ISSUE DATE : STATUS DATE : 3 US 7510 Volvo Car USA 2016 - 03 - 17 2016 - 03 - 24 FUNC GROUP : FUNC DESC : 3634 Washer Page 1 of 24 Attachment File Name File Size TJ 25153 S60 MY11 - , V60 , S60 , V60CC.pdf 0.8349 MB TJ 25153 S80 MY07 - , V70 MY08 - , XC70 MY08 - . pdf 0.7857 MB TJ 25153 S90 ( 234 ) MY17 - . pdf 1.4623 MB TJ 25153 V90V90CC ( 235236 ) MY17 - . pdf 1.5192 MB TJ 25153 XC90 ( 256 ) MY16 - . pdf 2.1365 MB TJ 25153_XC60 . pdf 0.8801 MB Vehicle Type Eng Struc Week Type Eng Sales Body Gear Steer Model Year Plant Chassis range Desc Range 124 2007 - 9999 0000850 - 9999999 200605 - 999952 134 2011 - 9999 0000194 - 9999999 201020 - 999952 135 2008 - 9999 0000395 - 9999999 200720 - 999952 136 2008 - 9999 0000400 - 9999999 200720 - 999952 138 2016 - 9999 0000122 - 9999999 201345 - 999952 155 2015 - 9999 0001147 - 9999999 201035 - 999952 156 2009 - 9999 0000212 - 9999999 200835 - 999952 157 2016 - 9999 0000022 - 9999999 201450 - 999952 234 2017 - 9999 0000001 - 9999999 201617 - 999952 235 2017 - 9999 0000001 - 9999999 201617 - 999952 236 2017 - 9999 0000001 - 9999999 201617 - 999952 256 2016 - 9999 0000001 - 9999999 201505 - 999952 ? Right first time in Time ? Produced in the USA and available as an electronic document . Hard copy documents are printed in USA on recycled paper containing a minimum of 50 % wastepaper and 10 % post - consumer waste . 2016 VOLVO CAR USA , LLC Technical Journal 25153 CSC Customer Symptom Codes Code Description 1U Washer fluid reservoir / hoses / Leakage VST Operation Number DTC Diagnostic Trouble Codes Rows beginning with * are modified Note ! If using a printed copy of this Technical Journal , first check for the latest online version . Text DESCRIPTION : If leakage occurs in the washer system at any of the multiple

ISSUING DEPARTMENT : CAR MARKET : United States and Canada TJ 19245 Technical Service PARTNER : ISSUE DATE : 3 US 7510 Volvo Cars North America YEAR MONTH DAY 2014 02 06 FUNC GROUP : FUNC DESC : 0 Publications Page 1 of 3 Attachment Vehicle Type Eng Struc Week Type Eng Sales Body Gear Steer Model Year Plant Chassis range Desc Range XXX 1927 - 9999 0000001 - 0999999 0 - 0 CSC Customer Symptom Codes Code Description 1C Administrative and Factory scheduled maintenance / Administrative and Factory scheduled maintenance DTC Diagnostic Trouble Codes Rows beginning with * are modified Note ! If using a printed copy of this Technical Journal , first check for the latest online version . Text In our Service Literature , a vehicle is often referred to by its ? type ? , not its ? model ? . For example the 1999 - 2006 Model Year S80 is type ? 184 ? . You may also see the designation , for example ? P2X ? . This is referring to a platform type or vehicle family . If a document states ? P1X ? or ? 5XX ? as an example , it will apply to all models within the platform type . ? 54X ? will apply to the ? 544 ? , ? 545 ? and ? 542 ? models . ? X ? represents variable data . ? Right first time in Time ? Produced in the USA and available as an electronic document . Hard copy documents are printed in USA on recycled paper containing a minimum of 50 % wastepaper and 10 % post - consumer waste . 2014 VOLVO CARS OF NORTH AMERICA , LLC Technical Journal 19245 Platform Model Type Model Years Comments P3 S80 124 2007 - V70 135 2008 - 2010 XC70 136 2008 - XC60 156 2010 - S60 134 2011 - V60 155 2015 - P2 S80 184 1999 - 2006 V70 285 2001 - 2007 XC70 295 2001 - 2007 S60 384 2001 - 2009 XC90 275 2003 - P1 S40 544 2004 - 2012 V50 545 2005 - 2012 C30 533 2007 - 2013 C70 542 2006 - 2013 X40 S40 644 2000 - 2004 V40 645 2000 - 2004 900 940 9

Perform an upgrade of the software according to TJ 31543. Test the car and check if any of the above DTCs return. If any DTC returns repair the car according VIDA and/or TJ33557 as necessary.

Technical Service PARTNER : ISSUE DATE : 3 US 7510 Volvo Cars North America YEAR MONTH DAY 2012 10 11 FUNC GROUP : FUNC DESC : 3521 Headlamp , complete Page 1 of 24 Attachment File Name File Size S80 - V70 - XC70 . pdf 0.5641 MB S60 - XC60 . pdf 0.5868 MB C30 - S40 - V50 - C70 . pdf 0.4175 MB XC90 . pdf 0.6020 MB Vehicle Type Eng Struc Week Type Eng Sales Body Gear Steer Model Year Plant Chassis range Desc Range 124 2007 - 9999 0000850 - 9999999 200605 - 999952 134 2011 - 9999 0000194 - 9999999 201020 - 999952 135 2008 - 2010 0000395 - 9999999 200720 - 999952 136 2008 - 9999 0000400 - 9999999 200720 - 999952 156 2010 - 9999 0000395 - 9999999 200720 - 999952 275 2003 - 9999 0000690 - 9999999 200232 - 999952 533 2007 - 9999 0000261 - 9999999 200637 - 999952 542 2006 - 9999 0000590 - 0999999 200549 - 999952 544 2004 - 2010 0000295 - 0999999 200339 - 999952 545 2004 - 2010 0000133 - 0999999 200347 - 999952 CSC Customer Symptom Codes Code Description W4 Headlights / Moisture / mist on inside of lens WG Headlights / Lens broken / chipped / cracked / distorted ? Fixed Right ? First Time ? Produced in the USA and available as an electronic document . Hard copy documents are printed in USA on recycled paper containing a minimum of 50 % wastepaper and 10 % post - consumer waste . 2012 VOLVO CARS OF NORTH AMERICA , LLC Technical Journal 17076 DTC Diagnostic Trouble Codes Text CSC = Customer Symptom Code DTC = Diagnostic Trouble Code Note ! If using a printed copy of this Retailer Technical Journal , first check for the latest online version . DESCRIPTION : The headlamp assembly may have condensation caused by moisture inside of lens . Some condensation is normal and not considered a defect . Automotive lamps are designed as an open system and atmospheric humidity can enter the lamp and also exit . The moisture disappears over a time period through the air v

Perform an upgrade of the software according to TJ 31543. Test the car and check if any of the above DTCs return. If any DTC returns repair the car according VIDA and/or TJ33557 as necessary.

installation of electric vehicle and PHEV battery assemblies. The table fits conveniently between the 2 lift columns and raises to a maximum convenient working height of 72?. The wide base equipped with locking casters and wheels helps ensure stability unlike a typical transmission jack that has a narrow footprint.

ISSUING DEPARTMENT : CAR MARKET : United States and Canada TJ 19245 Technical Service PARTNER : ISSUE DATE : 3 US 7510 Volvo Cars North America YEAR MONTH DAY 2014 02 06 FUNC GROUP : FUNC DESC : 0 Publications Page 1 of 3 Attachment Vehicle Type Eng Struc Week Type Eng Sales Body Gear Steer Model Year Plant Chassis range Desc Range XXX 1927 - 9999 0000001 - 0999999 0 - 0 CSC Customer Symptom Codes Code Description 1C Administrative and Factory scheduled maintenance / Administrative and Factory scheduled maintenance DTC Diagnostic Trouble Codes Rows beginning with * are modified Note ! If using a printed copy of this Technical Journal , first check for the latest online version . Text In our Service Literature , a vehicle is often referred to by its ? type ? , not its ? model ? . For example the 1999 - 2006 Model Year S80 is type ? 184 ? . You may also see the designation , for example ? P2X ? . This is referring to a platform type or vehicle family . If a document states ? P1X ? or ? 5XX ? as an example , it will apply to all models within the platform type . ? 54X ? will apply to the ? 544 ? , ? 545 ? and ? 542 ? models . ? X ? represents variable data . ? Right first time in Time ? Produced in the USA and available as an electronic document . Hard copy documents are printed in USA on recycled paper containing a minimum of 50 % wastepaper and 10 % post - consumer waste . 2014 VOLVO CARS OF NORTH AMERICA , LLC Technical Journal 19245 Platform Model Type Model Years Comments P3 S80 124 2007 - V70 135 2008 - 2010 XC70 136 2008 - XC60 156 2010 - S60 134 2011 - V60 155 2015 - P2 S80 184 1999 - 2006 V70 285 2001 - 2007 XC70 295 2001 - 2007 S60 384 2001 - 2009 XC90 275 2003 - P1 S40 544 2004 - 2012 V50 545 2005 - 2012 C30 533 2007 - 2013 C70 542 2006 - 2013 X40 S40 644 2000 - 2004 V40 645 2000 - 2004 900 940 9

U023292 REF NO : ISSUING DEPARTMENT : CAR MARKET : United States and Canada TJ 30858 Technical Service PARTNER : ISSUE DATE : STATUS DATE : 3 US 7510 Volvo Cars North America 2015 - 10 - 16 2015 - 10 - 21 FUNC GROUP : FUNC DESC : 3872 Collision avoidance Page 1 of 2 Attachment Vehicle Type Eng Struc Week Type Eng Sales Body Gear Steer Model Year Plant Chassis range Desc Range 256 2016 - 2016 0000516 - 0035745 201505 - 201539 CSC Customer Symptom Codes Code Description XR Blind spot information system ( BLIS ) / Does not work IV Text window and warning symbol / Text message VST Operation Number VST Operation Number Description 36004 - 2 Software control module downloading DTC Diagnostic Trouble Codes Text ? Right first time in Time ? Produced in the USA and available as an electronic document . Hard copy documents are printed in USA on recycled paper containing a minimum of 50 % wastepaper and 10 % post - consumer waste . 2015 VOLVO CARS OF NORTH AMERICA , LLC Technical Journal 30858 DESCRIPTION : Note ! If using a printed copy of this Technical Journal , first check for the latest online version . If a warning message ? BLIS system service required ? occurs in DIM together with DTC SODR - U023292 or / and SODL - U023292 , then follow the advice under SERVICE . Vehicle Report : Only if this TJ does not solve the problem or if the symptom would occur after the chassis number ranges above . Use concern area ? Vehicle Report ? and sub concern area ? Support Needed ? , use function group 3872 . Service : In case of customer complaints for above symptom , download SOD upgrade . ( side object detection module ) Page 2 of 2 2015 - 10 - 21

replace the heater core according to the attached instruction.

Replace with new caps on wheel screws

the calendar function in the car and direct start of the climate settings from the app does work, please follow the advice under service. Service: Do not replace any parts or perform any fault-tracing. The fix will be in the Software upgrade package at the dates stated below: *- 2018 week 19 there is a software release for XC90, S90, V90 built from and including structure week 201746. *- 2018 week 22 there is a software release where the fix is included for the XC40, new XC60, XC90, S90, V90 built before structure week 201746. * Please perform a Total Upgrade in accordance with TJ 31543.

replace the heater core according to the attached instruction.

Total Upgrade should be used if there are any upgrades available. - Perform an IHU Reload

Perform action according to instructions for different car variants.

Perform action according to instructions for different car variants.

the calendar function in the car and direct start of the climate settings from the app does work, please follow the advice under service. Service: Do not replace any parts or perform any fault-tracing. The fix will be in the Software upgrade package at the dates stated below: *- 2018 week 19 there is a software release for XC90, S90, V90 built from and including structure week 201746. *- 2018 week 22 there is a software release where the fix is included for the XC40, new XC60, XC90, S90, V90 built before structure week 201746. * Please perform a Total Upgrade in accordance with TJ 31543.

New foam rings between upper actuators (4 zones) and shafts in the Climate unit have been implemented in plant from 2017w04. In case of customer complaints, install new foamrings according the attached instruction. S/V90 4-zone XC90 4-zone S/V90 2-zone XC90 2-zone

SUDDENLY STARTS TO BLOW HOT/COLD AIR. CCMSW NOW IMPLEMENTED 2016W38 IN PRODUCTIONAND FOR SERVICE. IN CASE OF CUSTOMERCOMPLAINTS, PERFORM CCM SW UPGRADEACCORDING TO VIDA. CHASSIS BREAK WILL BEUPDATED WHEN AVAILABLE.

Add resister in line jumper cable.

A new IHU (Integrated Head Unit) software with changed functionality has been introduced in week 46, 2016. Download a Total Upgrade in accordance with VIDA (Vehicle Information and Diagnostics for Aftersales) instructions and TJ 31543. The new software can be used on all cars from production start.

Check rubber gromet in firewall

If the mentioned symptom occurs, the driver can push the button "Open/Close Menu" twice (marked as "4" in attachment) as a temporary solution. There is no need to replace any parts due to this symptom; it will be corrected in a future software.

If the mentioned symptom occurs, the driver can push the button "Open/Close Menu" twice (marked as "4" in attachment) as a temporary solution. There is no need to replace any parts due to this symptom; it will be corrected in a future software.

If you experience difficulty programming remote keys on Hybrid vehicles, please follow the advise in Technical Journal under service.

follow the advise in Technical Journal under service.

VIDA (OBC_NOT_RESPONDING.JPG), AND THERE ARE NO RELATED DTCS, FOLLOW PROCEDURE UNDER SERVICE.

Windshield Wiper or Turn Signal service even though the wipers and turn signals are working properly.Replace the lever hub and both switches,