2017 Volvo S90 TSBs

Vehicle type and platform identification.

To provide timely and high-quality feedback to the appropriate department or factory

Replace coolant pump

(Commonly Model Years 2016 And 2017)

found" or if functions such as lock/unlock are not working, please follow advice for detecting key

They are used in development of Volvo labor operations and repair methods, and promote safety and quality repairs in a timely manner. Tools are classified as mandatory because associated repairs and/or diagnostics cannot be completed properly without them.

and more precise fault tracing

and more precise fault tracing

and more precise fault tracing

They are used in development of Volvo labor operations and repair methods, and promote safety and quality repairs in a timely manner. Tools are classified as mandatory because associated repairs and/or diagnostics cannot be completed properly without them.

They are used in development of Volvo labor operations and repair methods, and promote safety and quality repairs in a timely manner. Tools are classified as mandatory because associated repairs and/or diagnostics cannot be completed properly without them.

and more precise fault tracing

New cleaning method developed.

Rear Seat Entertainment (RSE) accessory, it may be necessary to set the DVD region code to US (region 1)

center.

servicing distribution center.

distribution center.

been changed to solve issues with the shells coming loose. Remote controls and shells of the new design are not compatible with remote controls and shells of old design, and vice versa If a remote control or shell of the old design is replaced with a new part of the new design, then both the remote control and shell needs to be changed to the new design.

The remotes do not function while the vehicle is in Transport Mode. See transport mode instructions

Always replace both together, seat cushion upholstery and seat cushion foam . Both sides (Driver and/or passenger) should not be replaced as a pair if only one side has an issue. The backrest does not have to be replaced if only the seat cushion has an issue.

Please remove original bulletin by same number dated 2/18/2010.

friction and may create a noise when temperature are cold. The noise is most obvious during slow driving and turning (e.g. parking maneuvers). The noise will become less after some driving. Spray wax, Wurth PN 0893923284 , on the outer bellows

In order to restore the connectivity functions, the "Roaming" function must be activated in the vehicle menus.

and more precise fault tracing

description of affected seat covers before removal. Seat upholsteries are not to be replaced without contacting Volvo Technical Helpdesk (THD

For the cars in the header this DTC can be ignored as it doesn't affect any of the functions in the car. Do not perform any fault tracing or component replacement due to this DTC if there is no related customer symptom.

and more precise fault tracing

In order to restore the connectivity functions, the "Roaming" function must be activated in the vehicle menus.

and more precise fault tracing

description of affected seat covers before removal. Seat upholsteries are not to be replaced without contacting Volvo Technical Helpdesk (THD

description of affected seat covers before removal. Seat upholsteries are not to be replaced without contacting Volvo Technical Helpdesk (THD

For the cars in the header this DTC can be ignored as it doesn't affect any of the functions in the car. Do not perform any fault tracing or component replacement due to this DTC if there is no related customer symptom.

New cleaning method developed.

found" or if functions such as lock/unlock are not working, please follow advice for detecting key

description of affected seat covers before removal. Seat upholsteries are not to be replaced without contacting Volvo Technical Helpdesk (THD

New cleaning method developed.

found" or if functions such as lock/unlock are not working, please follow advice for detecting key

friction and may create a noise when temperature are cold. The noise is most obvious during slow driving and turning (e.g. parking maneuvers). The noise will become less after some driving. Spray wax, Wurth PN 0893923284 , on the outer bellows

The locking retainer/washer must not be tight against the seat frame. It must have a play of 1,0mm +/-0,5mm.

and more precise fault tracing

The locking retainer/washer must not be tight against the seat frame. It must have a play of 1,0mm +/-0,5mm.

Distribution Center.

as a troubleshooting aid for the Intellisafe system, please follow the advice in Technical Journal

The locking retainer/washer must not be tight against the seat frame. It must have a play of 1,0mm +/-0,5mm.

Please contact System Administrator"

The blistering of the material is often causedby an air freshener applied directly to the airvents. Do not attach any sort of air freshenerdirectly on air vents.

CARS.THEY ARE USED IN DEVELOPMENT OF VOLVO LABOROPERATIONS AND REPAIR METHODS, AND PROMOTE SAFETY ANDQUALITY REPAIRS IN A TIMELY MANNER. TOOLS ARE CLASSIFIED AS MANDATORY BECAUSE ASSOCIATED REPAIRS AND/ORDIAGNOSTICS CANNOT BE COMPLETED PROPERLYWITHOUT THEM.

Replace the VCM Backup Battery and download the relevant Software.

Before joining a remote session:
 Connect a suitable battery maintainer/charger and verify that the battery voltage indicated in VIDA is between 12.5V and 14.9V.
 Connect to the vehicle over a wired connection using a VOE (Volvo OBD to Ethernet) adapter and perform a NEW vehicle readout.

Service:
 Dont charge the battery before the test, jump start the vehicle if needed. Read out the vehicle with VIDA and start the test.

Before joining a remote session:
 Connect a suitable battery maintainer/charger and verify that the battery voltage indicated in VIDA is between 12.5V and 14.9V.
 Connect to the vehicle over a wired connection using a VOE (Volvo OBD to Ethernet) adapter and perform a NEW vehicle readout.

Improved 12V battery test in VIDA

After capturing a NEW VIDA readout, conduct the steps in VIDA.

After capturing a NEW VIDA readout, conduct the steps in VIDA.

After capturing a NEW VIDA readout, conduct the steps in VIDA.

Improved 12V battery test in VIDA

Replace the VCM Backup Battery and download the relevant Software.

After capturing a NEW VIDA readout, conduct the steps in VIDA.

After capturing a NEW VIDA readout, conduct the steps in VIDA.

After capturing a NEW VIDA readout, conduct the steps in VIDA.

Use had held tester.

Recovering control modules stuck in not responding after failed SW download. Connect VIDA to read-out the car. Follow steps outlined in this TJ.

there is a warning message in the DIM about Low tire pressure and DTC BCM-C007768, follow advice under Service.

Action S39893 on certain model year 2017 - 2018 XC90 and 2018 XC60 and S90 vehicles. Volvo has identified that the Vehicle Connectivity Module (VCM) backup battery may be depleted while the vehicle is plugged in and charging the high voltage battery. This could result in a ?Volvo On Call Service Required? message displayed in the Driver Information Module (DIM). This condition has no effect on the vehicle?s drivability or performance.

Action S39893 on certain model year 2017 - 2018 XC90 and 2018 XC60 and S90 vehicles. Volvo has identified that the Vehicle Connectivity Module (VCM) backup battery may be depleted while the vehicle is plugged in and charging the high voltage battery. This could result in a ?Volvo On Call Service Required? message displayed in the Driver Information Module (DIM). This condition has no effect on the vehicle?s drivability or performance.

repair methods evolve.

System service required? displayed in DIM, then it is possible that there is water ingress into rear park assist sensors and connectors caused by splices in the rear cable harness. If the sensors and connectors have water ingress then follow method in VIDA

Perform Total Upgrade, replace fuse and compressor according to VIDA.

If not working check the heating grid wiring.

Perform Total Upgrade, replace fuse and compressor according to VIDA.

If not working check the heating grid wiring.

Swapping control modules may result in consequential damage to the swapped control module and in certain cases several other control modules in the vehicle. Swapping the Driver Information Module (DIM) is strictly forbidden as the DIM it is the main carrier of the odometer function, and will, in case of swapping, result in manipulated odometer value. Service: Please do NOT swap any control modules from vehicle to vehicle for testing, unless instructed to do so in a Vehicle Report by the Technical Helpdesk

Swapping control modules may result in consequential damage to the swapped control module and in certain cases several other control modules in the vehicle. Swapping the Driver Information Module (DIM) is strictly forbidden as the DIM it is the main carrier of the odometer function, and will, in case of swapping, result in manipulated odometer value. Service: Please do NOT swap any control modules from vehicle to vehicle for testing, unless instructed to do so in a Vehicle Report by the Technical Helpdesk

Volvo Car USA LLC and Volvo Car of Canada Ltd (Volvo) on behalf of Volvo Car Corporation, has decided to launch Service Action S39835 on certain model year 2017 XC90, S90, V90CC and V90 vehicles. The Vehicle Connectivity Module (VCM) contains telematics functions that may increase the current draw when the vehicle is not in use. The corrective action is to perform a Total Upgrade which contains new VCM software.

Action S39835 on certain model year 2017 XC90, S90, V90CC and V90 vehicles. The Vehicle Communication Module (VCM) contains telematics functions that may increase the current draw when the vehicle is not in use. The corrective action is to perform a Total Upgrade which contains new VCM software. Service Action S39835 affects 5,506 vehicles in the U.S. and 725 in Canada.

by providing a visible indication of error frames that are being transmitted on the network when the fault becomes active. The advantage of using the EFF function is that error frames are usually transmitted on the network before a vehicle symptom can occur. Hence, if the fault is very intermittent in nature, it may be possible, for example, to induce the wiring fault for a short duration by manipulating the vehicle harnesses and connectors. The electrical fault will occur and be detected by the EFF without ever having a vehicle symptom appear. The instructions for setting up the tool have been simplified.

connection, the following symptoms may appear: 1 - In car apps such as TuneIn and Pandora connect to the service but say "Connecting..." when trying to play music. 2 - When a device is connected to the vehicle's WiFi hotspot, it will redirect to an AT&T website such as the one in the attachment Wifi Connection Message.jpg The above symptoms are due to the data plan for the P-SIM expiring. There is no fault with the vehicle. Should a customer present one of the above complaints, please direct them to the support site for instructions on how to renew the data plan for the P-SIM.

When viewing the Quiescient Current Statistics in VIDA, vehicles with a regular FMDM disturbance will often show a number of counts in the 400-800mA range. If a vehicle with the latest software continues to have a low State of Charge and no cause can be found, replace the FMDM. Perform a Total Upgrade according to TJ 31543. The new FMDMs are not compatible with older CEM software.

A text message which the driver has to actively acknowledge in order to remove it will be displayed when the fuel level is low. Service: Perform a Total Upgrade according to TJ 31543.

Perform Total Upgrade, replace fuse and compressor according to VIDA.

We process the personal data that you provide in connection with the creation of your VIDA account. The purpose of our processing is to administer your VIDA account (from registration to eventual termination of the account), to provide you with all the functionality related to VIDA, to allow access to VIDA and to communicate updates related to VIDA. Log data generated when using VIDA is processed as necessary or appropriate to safeguard the security and functionality of VIDA for example against malware or unauthorized access.

System service required? displayed in DIM, then it is possible that there is water ingress into rear park assist sensors and connectors caused by splices in the rear cable harness. If the sensors and connectors have water ingress then follow method in VIDA

System internal failures" is set. This is due to that the I-TPMS function in VDDM has not been initialized.

Perform Total Upgrade, replace fuse and compressor according to VIDA.

Perform Total Upgrade, replace fuse and compressor according to VIDA.

Perform Total Upgrade, replace fuse and compressor according to VIDA.

manufacture and every 9 months thereafter.To maintain the battery, connect the battery to an appropriate 12V battery charger. Please follow all precautions that apply when charging a larger main lead-acid battery. The battery will self-discharge over time and if allowed to be left at a sufficiently low voltage, it will become permanently damaged. The battery must have a minimum voltage of 9 volts to be installed in a vehicle.

Perform Total Upgrade, replace fuse and compressor according to VIDA.

Perform Total Upgrade, replace fuse and compressor according to VIDA.

Perform Total Upgrade, replace fuse and compressor according to VIDA.

Volvo Car USA LLC and Volvo Car Canada LTD (Volvo) on behalf of Volvo Car Group, has decided to launch Recall R39917 on certain model year 2017 ? 2019 XC90, S90, V60CC, V90, XC40, V60, XC60, V90CC vehicles. Volvo has identified that the Telematics and Driver Support Systems may not function as designed due to a software error in the Vehicle Connectivity Module (VCM). This could result in the vehicle not providing the GPS location, increasing the risk of no emergency response. The corrective action is to complete a Total Upgrade on all affected vehicles.

certain model year 2017 ? 2019 XC90, S90, V60CC, V90, XC40, V60, XC60, V90CC vehicles. Volvo has identified that the Telematics and Driver Support Systems may not function as designed due to a software error in the Vehicle Connectivity Module (VCM). This could result in the vehicle not providing the GPS location, increasing the risk of no emergency response. The corrective action is to complete a Total Upgrade on all affected vehicles. A total of 17,548 U.S. and 1,461 Canadian vehicles are eligible for this recall.

manufacture and every 9 months thereafter.To maintain the battery, connect the battery to an appropriate 12V battery charger. Please follow all precautions that apply when charging a larger main lead-acid battery. The battery will self-discharge over time and if allowed to be left at a sufficiently low voltage, it will become permanently damaged. The battery must have a minimum voltage of 9 volts to be installed in a vehicle.

Volvo Car USA LLC and Volvo Car Canada LTD (Volvo) on behalf of Volvo Car Group, has decided to launch Recall R39917 on certain model year 2017 ? 2019 XC90, S90, V60CC, V90, XC40, V60, XC60, V90CC vehicles. Volvo has identified that the Telematics and Driver Support Systems may not function as designed due to a software error in the Vehicle Connectivity Module (VCM). This could result in the vehicle not providing the GPS location, increasing the risk of no emergency response. The corrective action is to complete a Total Upgrade on all affected vehicles.

certain model year 2017 ? 2019 XC90, S90, V60CC, V90, XC40, V60, XC60, V90CC vehicles. Volvo has identified that the Telematics and Driver Support Systems may not function as designed due to a software error in the Vehicle Connectivity Module (VCM). This could result in the vehicle not providing the GPS location, increasing the risk of no emergency response. The corrective action is to complete a Total Upgrade on all affected vehicles. A total of 17,548 U.S. and 1,461 Canadian vehicles are eligible for this recall.

Perform Total Upgrade, replace fuse and compressor according to VIDA.

Perform Total Upgrade, replace fuse and compressor according to VIDA.

Perform Total Upgrade, replace fuse and compressor according to VIDA.

System service required? displayed in DIM, then it is possible that there is water ingress into rear park assist sensors and connectors caused by splices in the rear cable harness. If the sensors and connectors have water ingress then follow method in VIDA

of the vehicle's Intellisafe systems. This graphic was removed from the software on May 12, 2017 due to some inaccuracies. Service: Affected software packages: - Total Upgrade - Service 2.0 - PDS (Pre-Delivery Service) - VDDM_PBL (Vehicle Dynamics Domain Master Primary Bootloader) - DIM Upgrade or Reload Any vehicle that received one of the software packages listed above from May 8th, 2017 to May 11th, 2017 will have received the DIM graphic. From May 12th, 2017 and on, if any of the software packages listed above are loaded to a car that has received the new graphic, it will be removed. Vehicles built from structure week 2017w17 to 2017w22 will have the graphic in the car from the factory but it will be removed when any of the software packages listed are loaded. Do NOT replace, reload or upgrade any components for customer complaints of this function missing. This function will be re-added to the DIM software at a later date that is to be determined.

If not working check the heating grid wiring.

System service required? displayed in DIM, then it is possible that there is water ingress into rear park assist sensors and connectors caused by splices in the rear cable harness. If the sensors and connectors have water ingress then follow method in VIDA

This TJ is released to inform that a method is changed in VIDA regarding replacement of fuel low pressure sensor (LPS). There are two different methods in VIDA depending on version of fuel low pressure sensor (LPS), see attached document. The method in VIDA can be found if searching for VST operation 28405-2.

This TJ is released to inform that a method is changed in VIDA regarding replacement of fuel low pressure sensor (LPS). There are two different methods in VIDA depending on version of fuel low pressure sensor (LPS), see attached document. The method in VIDA can be found if searching for VST operation 28405-2.

of the vehicle's Intellisafe systems. This graphic was removed from the software on May 12, 2017 due to some inaccuracies. Service: Affected software packages: - Total Upgrade - Service 2.0 - PDS (Pre-Delivery Service) - VDDM_PBL (Vehicle Dynamics Domain Master Primary Bootloader) - DIM Upgrade or Reload Any vehicle that received one of the software packages listed above from May 8th, 2017 to May 11th, 2017 will have received the DIM graphic. From May 12th, 2017 and on, if any of the software packages listed above are loaded to a car that has received the new graphic, it will be removed. Vehicles built from structure week 2017w17 to 2017w22 will have the graphic in the car from the factory but it will be removed when any of the software packages listed are loaded. Do NOT replace, reload or upgrade any components for customer complaints of this function missing. This function will be re-added to the DIM software at a later date that is to be determined.

The VIDA test is stillavailable but no longer required. For battery replacements under warranty, thecode generated by the BT3300 must bemanually copied into the repair order text. Itmust also be printed and attached to the hardcopy of the repair order.

Access by using the applicable URL.

VIDA 2015 BATTERY TESTING IS THE ONLY APPROVED METHOD FOR PRODUCING BATTERY TEST CODES. THE USE OF VIDA CLASSIC OR OTHER MEASURING TOOLS IS NOT CONSIDERED ACCEPTABLE WHEN SUBMITTING WARRANTY CLAIMS.

S10303 on certain model year 2025 EX90 vehicles.
 Volvo Car Investigations have identified that there is a pairing issue with the key fob.
 As a result, there is a possibility that the customers key fob is not paired to the vehicle.
 The corrective action is to download SP Software.
 S10303 affects 151 vehicles in the U.S and 5 in Canada.

S10303 on certain model year 2025 EX90 vehicles.
 Volvo Car Investigations have identified that there is a pairing issue with the key fob.
 As a result, there is a possibility that the customers key fob is not paired to the vehicle.
 The corrective action is to download SP Software.
 S10303 affects 151 vehicles in the U.S and 5 in Canada.

restore CSD functionality and/or complete software download

Service: *See guide updated Oct. 12, 2016 for relevant P5/SPA Software Download information: P5_SPA_SW_Guide.pdf See VIDA Software tab for all other vehicles.The attached checklists can be used for restoring customer settings, where applicable.

The corrective action is to perform a VDDM PBL software upgrade

Service: *See guide updated Oct. 12, 2016 for relevant P5/SPA Software Download information: P5_SPA_SW_Guide.pdf See VIDA Software tab for all other vehicles.The attached checklists can be used for restoring customer settings, where applicable.

If you receive this error message during a software download, use the Advanced Test function in the VIDA Software tab to read out the part number and serial number of the IHU. If the IHU indicates part number "0" and serial number "0000FFFFFFFF" the IHU must be replaced.

Service: *See guide updated Oct. 12, 2016 for relevant P5/SPA Software Download information: P5_SPA_SW_Guide.pdf See VIDA Software tab for all other vehicles.The attached checklists can be used for restoring customer settings, where applicable.

(full turn and acceleration), then follow advice under service. Download Total Upgrade software

customers, so that their cars give them the best experience possible . As of May 13th, 2019, when the software in your customer's vehicle is updated via Service 2.0 or Total Upgrade (TJ 31543), the customer will have access to the functions and improvements

customers, so that their cars give them the best experience possible . As of May 13th, 2019, when the software in your customer's vehicle is updated via Service 2.0 or Total Upgrade (TJ 31543), the customer will have access to the functions and improvements

Service: *See guide updated Oct. 12, 2016 for relevant P5/SPA Software Download information: P5_SPA_SW_Guide.pdf See VIDA Software tab for all other vehicles.The attached checklists can be used for restoring customer settings, where applicable.

Service: *See guide updated Oct. 12, 2016 for relevant P5/SPA Software Download information: P5_SPA_SW_Guide.pdf See VIDA Software tab for all other vehicles.The attached checklists can be used for restoring customer settings, where applicable.

release, will reset the sound settings back to default settings on the MY 2016 - 2018 vehicles listed above. The new software packages contain updated IHU software that will reset all customer sound settings such as treble, bass, balance and equalizer settings which will go back to default settings after the upgrade. For reference, please see attached example picture Sound.jpg. This applies to ALL driver profiles saved in the IHU. The VIDA IHU Diagnostic Sequences for Enabling the Export profile to USB menu will function after this upgrade.

Service: *See guide updated Oct. 12, 2016 for relevant P5/SPA Software Download information: P5_SPA_SW_Guide.pdf See VIDA Software tab for all other vehicles.The attached checklists can be used for restoring customer settings, where applicable.

(full turn and acceleration), then follow advice under service. Download Total Upgrade software

(full turn and acceleration), then follow advice under service. Download Total Upgrade software

"PDS" Pre-Delivery Service

If there is a problem loading software to a car equipped with a CD player, follow the instructions in TJ 31360

With this message, it will not be possible to purchase Software Products. "124 - Client ID is not registered"

FOLLOW INSTRUCTIONS PROVIDED FOR PROPER SOFTWAREDOWNLOADS BY YEAR AND MODEL.

Radial force variation ( RFV ) is a condition where excessive run out will create the same symptom as an unbalanced tire. Tire balancing should be checked and corrected as needed but is not always the solution. Road Force balancing detects assembly run out measured under load simulating real world driving conditions and will provide a solution to match mount the tire and rim to minimize loaded run out.

If TPMS warning symbol is flashing in DIM with a "TPMS Service Required" message, then follow advice under Service

Before carrying out this TJ, always start with TJ 20803 to sort out if the problem is related to driveline or wheels.

Before carrying out this TJ, always start with TJ 20803 to sort out if the problem is related to driveline or wheels.

If the slider button is missing or damaged, there is no need to replace the entire remote control. Install a new slider button (31419983) according to the attached instruction.

Replacing customer existing summer tire with an all season tire.

stamping, name and size.

stamping, name and size.

Replacing customer existing summer tire with an all season tire.

stamping, name and size.

Before carrying out this TJ, always start with TJ 20803 to sort out if the problem is related to driveline or wheels.

stamping, name and size.

be prepared for these issues.

Radial force variation ( RFV ) is a condition where excessive run out will create the same symptom as an unbalanced tire. Tire balancing should be checked and corrected as needed but is not always the solution. Road Force balancing detects assembly run out measured under load simulating real world driving conditions and will provide a solution to match mount the tire and rim to minimize loaded run out.

stamping, name and size.

be prepared for these issues.

Radial force variation ( RFV ) is a condition where excessive run out will create the same symptom as an unbalanced tire. Tire balancing should be checked and corrected as needed but is not always the solution. Road Force balancing detects assembly run out measured under load simulating real world driving conditions and will provide a solution to match mount the tire and rim to minimize loaded run out.

Service: In case of vibrations, please follow TJ 20803 to establish the if the vibrations are coming from powertrain components or from wheels/tires. If analysis indicate that the vibrations are coming from the wheels/tires, then follow TJ 32161.

stamping, name and size.

stamping, name and size.

Before carrying out this TJ, always start with TJ 20803 to sort out if the problem is related to driveline or wheels.

Before carrying out this TJ, always start with TJ 20803 to sort out if the problem is related to driveline or wheels.

Service: In case of vibrations, please follow TJ 20803 to establish the if the vibrations are coming from powertrain components or from wheels/tires. If analysis indicate that the vibrations are coming from the wheels/tires, then follow TJ 32161.

Before carrying out this TJ, always start with TJ 20803 to sort out if the problem is related to driveline or wheels.

Before carrying out this TJ, always start with TJ 20803 to sort out if the problem is related to driveline or wheels.

Before carrying out this TJ, always start with TJ 20803 to sort out if the problem is related to driveline or wheels.

stamping, name and size.

changed from MY2017 (structure week 2016 week 17).Now an Indirect TPMS system is being used (I-TPMS).The Direct TPMS system (D-TPMS) that was used in XC90 MY 2016 is no longer used inproduction from MY 2017.

under service.

under service.

under service.

Listed below are the latest planned owner notification re-mails. Please refer to SMB 00-323 and SMB 00-323A for information on how and where to find the related Service Action documents in VRC2 and TIE.

The WRCP is used to gauge individual retailer performance on objective measures over time. By setting clear performance expectations and parameters and assisting retailers in focusing on individual processes and procedures, all retailers are provided with adequate tools to help achieve the ultimate goal of qualifying for self-authorization status.

address non-warranty customer concerns in an expeditious manner. The ownership experience should never be compromised due to a customer inconvenience. In an effort to help support an enhanced customer ownership experience, Volvo retailers will now have the ability to self-authorize goodwill claims (1 time only per VIN) for the customers of the new MY2017 S90/V90 & V90CC.

Improving Service Action/Recall scheduling.

? Vehicle inspection procedure (Truck Delivery) ? Pre-Delivery Service (PDS) ? Vehicle in stock maintenance ? Vehicle Delivery (Customer Delivery) New car delivery is a crucial step in the Retail Car Delivery Process. At this point the buying experience turns into a long-term relationship. It is the retailer?s responsibility to ensure that the car and the experience are as enjoyable and informative as possible.

dealer by providing a specific diagnostic labor operation. This will aid the Warranty Administrator when claiming reimbursement for diagnostic labor while not adversely affecting the dealers General Operation Index.

Claims submitted for map upgrades will be debited

This bulletin is a list of equipment recommended by Volvo to it's dealer or any shop maintaining or repairing Volvo's. The equipment can be provided by Volvo's equipment supplier

This bulletin is a list of equipment recommended by Volvo to it's dealer or any shop maintaining or repairing Volvo's. The equipment can be provided by Volvo's equipment supplier

This bulletin is a list of equipment recommended by Volvo to it's dealer or any shop maintaining or repairing Volvo's. The equipment can be provided by Volvo's equipment supplier

VCUSA Quality and Customer Satisfaction announces the IC Retainer Bolt Recall Customer Satisfaction Assistance Program. This program will allow Volvo retailers to proactively address customer satisfaction concerns as they relate to Recall R89174 repairs in an expeditious manner.

By setting clear performance expectations and parameters and assisting retailers in focusing on individual processes and procedures, all retailers are provided with adequate tools to help achieve the ultimate goal of qualifying for self authorization status.

VIDA will run slow after some time. VIDA might freeze. Certain operations might stop working.In order to release stored session memory, restart VIDA as needed throughout the day in order to minimize the risk to experience above symptoms.

VEHICLE INSPECTION PROCEDURE (TRUCK DELIVERY) PRE-DELIVERY SERVICE (PDS) VEHICLE IN STOCK MAINTENANCE VEHICLE DELIVERY (CUSTOMER DELIVERY) NEW CAR DELIVERY IS A CRUCIAL STEP IN THE RETAIL CAR DELIVERY PROCESS. AT THIS POINT THE BUYING EXPERIENCE TURNS INTO A LONG-TERM RELATIONSHIP. IT IS THE RETAILERS RESPONSIBILITY TO ENSURE THAT THE CAR AND THE EXPERIENCE ARE AS ENJOYABLE AND INFORMATIVE AS POSSIBLE.

WARRANTY, CPO LIMITED WARRANTY AND/OR THE VIP EXTENDED WARRANTY DOES NOT APPLY. THESE REQUESTS MAY BE CONSIDERED IF IT WILL ENHANCE OWNER RETENTION. RETAILERS SHOULD REQUEST FINANCIAL ASSISTANCE FOR THEIR CUSTOMERS BY CONTACTING THEIR AFTERSALES MARKET MANAGER (AMM), IF THEY ARE NOT A SELF-AUTHORIZING (LEVEL A) RETAIL FACILITY

from the headlining around the sun roof, see instructions under Service referring to TJI-516730-1_1_0

Hood" DIM message, please follow advice under "service". And before replacing any parts, follow the 3 steps in the instructions.

Hood" DIM message, please follow advice under "service". And before replacing any parts, follow the 3 steps in the instructions.

Expose vehicle to outside daylight for 48hrs.

May required replacing terminals.

from the headliner.

Will only be performed at 20k

Apply grease P/N 31437986

Volvo Car USA LLC and Volvo Car of Canada Ltd (Volvo) on behalf of Volvo Car Corporation, has decided to launch Service Action S89833 on certain model year 2017 S90 vehicles. Volvo has identified that the headliner may become loose at the rear window. The corrective action is to replace the rear headliner clip.

Replace Headliner Clip

Action S89833 on certain model year 2017 S90 vehicles. Volvo has identified that the headliner may become loose at the rear window. The corrective action is to replace the rear headliner clip.

Apply new sealing compound ~20-30 cm (8 to 11 inches) on top of the original glue on the upper part of the beam, so that you get contact between the beam and the outer door panel. Do not push the outer door panel when applying the glue, see attached picture TJ32381.jpg. Diameter of the glue: 8 mm. P/N: 1161767 (VIDA P/N) replaced by Volvo Chemical Portal US P/N: 08901002 Volvo Chemical Portal Canada P/N: 890.1003

Replace trim molding

has decided to launch Service Campaign S89809 on certain model year 2017 S90 vehicles. Volvo has identified that the exterior door trim moldings may crack. The corrective action is to replace all four (4) exterior door trim moldings on eligible vehicles.

The corrective action is to replace all four (4) exterior trim moldings on eligible vehicles.

Volvo Car Corporation, has decided to launch Service Campaign S89807 on certain model year 2016 ? 2017 XC90 and S90 vehicles. Volvo has identified the painted surface under the exterior door handles may become scratched by the handles. The corrective action is add tape under all four (4) exterior door handles

Volvo Car USA LLC and Volvo Car of Canada Ltd (Volvo) on behalf of Volvo Car Corporation, has decided to launch Service Campaign S89807 on certain model year 2016 ? 2017 XC90 and S90 vehicles. Volvo has identified the painted surface under the exterior door handles may become scratched by the handles. The corrective action is add tape under all four (4) exterior door handles per TJ 32183.

Volvo Car Corporation, has decided to launch Service Campaign S89807 on certain model year 2016 ? 2017 XC90 and S90 vehicles. Volvo has identified the painted surface under the exterior door handles may become scratched by the handles. The corrective action is add tape under all four (4) exterior door handles

The corrective action is add tape under all four (4) exterior door handles per TJ 32183.

Volvo Car USA LLC and Volvo Car of Canada Ltd (Volvo) on behalf of Volvo Car Corporation, has decided to launch Service Campaign S89807 on certain model year 2016 ? 2017 XC90 and S90 vehicles. Volvo has identified the painted surface under the exterior door handles may become scratched by the handles. The corrective action is add tape under all four (4) exterior door handles per TJ 32183.

MONTH DAY BULLETIN 2012 02 02 Take Your Special Tool Storage to the Next Level Maintain Your Parts & Service Department Efficiency , Organization and Productivity with the Volvo Special Service Tool Cabinet from Stanley Vidmar ! System includes ( 3 ) Stanley Vidmar Modular drawer cabinets with partitions , dividers and lock , ( 2 ) overhead shelf door cabinets with one shelf and lock ; designed to store Volvo Special Service Tools . Features ? Three - cabinet system with two overhead storage cabinets . ? 38 drawers with compartments . ? Exceptional tool organization with dedicated compartments , partitions and dividers . ? All cabinets are lockable . ? All steel construction . ? Drawers rated at 400 lbs . capacity fully loaded and extended . ? Drawer cabinets have pallet base included . ? Allows cabinets to be moved fully loaded and as your needs change . ? Tool locator sheets and index provided for placement of 600 tools in drawers and overhead cabinets . Technical Weight approx . ( lbs ) 2400 554 - VOLVO - SPL Color Volvo Blue Volvo Special Tool Cabinet Power supply ( V / Hz / A ) None Dimensions ( L x W x H ) 90 " x 27 - 3 / 4 " x 90 " Dealer Price $ 7,292 To Order Call 800 - 345 - 3399 or visit Volvodealersolutions.com today ! Promo # VO12 - 11 All Product Sold F.O.B . Shipping Point Pricing effective through June 30 , 2012 " Fixed Right ? First Time " SERVICE TECHNICIANS SERVICE PARTS WORKSHOP Service MANAGER MANAGER FOREMAN Personnel : read and initial . 2012 Volvo Cars of North America , LLC Printed in USA on recycled paper containing a minimum of 50 % wastepaper and 10 % post - consumer waste

Apply new sealing compound ~20-30 cm (8 to 11 inches) on top of the original glue on the upper part of the beam, so that you get contact between the beam and the outer door panel. Do not push the outer door panel when applying the glue, see attached picture TJ32381.jpg. Diameter of the glue: 8 mm. P/N: 1161767 (VIDA P/N) replaced by Volvo Chemical Portal US P/N: 08901002 Volvo Chemical Portal Canada P/N: 890.1003

Apply new sealing compound ~20-30 cm (8 to 11 inches) on top of the original glue on the upper part of the beam, so that you get contact between the beam and the outer door panel. Do not push the outer door panel when applying the glue, see attached picture TJ32381.jpg. Diameter of the glue: 8 mm. P/N: 1161767 (VIDA P/N) replaced by Volvo Chemical Portal US P/N: 08901002 Volvo Chemical Portal Canada P/N: 890.1003

Insert the screws in thesame location as shown in Technical Journal to prevent contact with the grill.

The pop-up window example, in the attachment, will be shown 14 days prior to the expiraton date. When this occurs, please change the password as soon as possible, in order to prevent from being locked out.

HAS DECIDED TO LAUNCH SERVICE CAMPAIGN S89808 ON CERTAIN MODEL YEAR 2017 S90 VEHICLES. VOLVO HAS IDENTIFIED THAT CERTAIN VEHICLES MAY HAVE BEEN INCORRECTLY ASSEMBLED WITH A RUBBER SEAL UNDER THE SUNROOF WIND DEFLECTOR. THE RUBBER SEAL MAY BECOME LOOSE AND WEDGED BETWEEN THE ROOF AND SUNROOF. SERVICE: THE CORRECTIVE ACTION IS TO REMOVE AND DISCARD THE RUBBER SEAL AND CLEAN OFF RESIDUAL ADHESIVE.

Download software.

Action S29878 on certain model year 2017 - 2018 XC90, S90, V90, V90CC, XC60 vehicles. Volvo has identified that the lower flap in the capless unit that is located inside the fuel tank filler pipe, intermittently may not close completely after refueling. This could result in a Check Engine Light and Diagnostic Trouble Code ECM-P0044200.

Action S29878 on certain model year 2017 - 2018 XC90, S90, V90, V90CC, XC60 vehicles. Volvo has identified that the lower flap in the capless unit that is located inside the fuel tank filler pipe, intermittently may not close completely after refueling. This could result in a Check Engine Light and Diagnostic Trouble Code ECM-P0044200.

VGT, TC) And US17+OBD22 (11L) Emissions

warranty coverage on the Rear Suspension Air Compressor for certain model year 2017-2020 S90 Series, 2017-2020 V90 Series, 2016-2020 XC90 and 2018-2020 XC60 models. Volvo has determined that there is the potential for a malfunction caused by a valve inside the compressor which may contain residue from an anti-corrosive agent.

warranty coverage on the Rear Suspension Air Compressor for certain model year 2017-2020 S90 Series, 2017-2020 V90 Series, 2016-2020 XC90 and 2018-2020 XC60 models. Volvo has determined that there is the potential for a malfunction caused by a valve inside the compressor which may contain residue from an anti-corrosive agent.

warranty coverage on the Rear Suspension Air Compressor for certain model year 2017-2020 S90 Series, 2017-2020 V90 Series, 2016-2020 XC90 and 2018-2020 XC60 models. Volvo has determined that there is the potential for a malfunction caused by a valve inside the compressor which may contain residue from an anti-corrosive agent.

warranty coverage on the Rear Suspension Air Compressor for certain model year 2017-2020 S90 Series, 2017-2020 V90 Series, 2016-2020 XC90 and 2018-2020 XC60 models. Volvo has determined that there is the potential for a malfunction caused by a valve inside the compressor which may contain residue from an anti-corrosive agent.

Make sure that the sound is coming from the engine pad, NOT from the drive shaft. Remove the left engine pad and split by removing the small screw. Lubricate with graphite grease (PN 1161851) on points as in attachment. Torque for small screw is 8 nm.

Make sure that the sound is coming from the engine pad, NOT from the drive shaft. Remove the left engine pad and split by removing the small screw. Lubricate with graphite grease (PN 1161851) on points as in attachment. Torque for small screw is 8 nm.

Make sure that the sound is coming from the engine pad, NOT from the drive shaft. Remove the left engine pad and split by removing the small screw. Lubricate with graphite grease (PN 1161851) on points as in attachment. Torque for small screw is 8 nm.

( see attached sample files ). The sound may come from the balance shaft which is fitted in the oil sump area where the noise is most concentrated. A new design of the balance shaft is planned to be introduced 2018-Q2. Replace the balance shaft according the instructions in VIDA. Note: It's extremely important to adjust the new balance shaft with the correct tools according the instructions otherwise the sound may occur again in a short mileage.

VCM software release can cause any or all of the above symptoms. *The current solution is to install VCM repair software by following the procedure below: 1. Perform a Total Upgrade according to TJ 31543 to bring all vehicle nodes to the latest software status. The Upgrades list in VIDA should be empty before proceeding. *2. Download the appropriate SP below to prevent the above symptoms and re-enable ERS XC90: SP 31676890, CMQ VCM Fix S90: SP 31676891, CMQ VCM Fix 3. Drive the vehicle over 20mph to release the VCM from diagnostic mode. ERS will be unavailable until this is done. 4. Close and lock the vehicle for 3+ minutes to allow the network to shut down before testing ERS. PLEASE NOTE - DO NOT perform a Total Upgrade or VCM Upgrade after performing this procedure (they will now appear in the Upgrades list). Doing so will re-install the affected software. - Not all battery drains are caused by this issue. *The repair software will be integrated with regular VCM Upgrade/Reload and Total Upgrade/PDS/Service 2.0 packages in the coming weeks *This TJ will be updated when the updated software packages are available.

VCM software release can cause any or all of the above symptoms. *The current solution is to install VCM repair software by following the procedure below: 1. Perform a Total Upgrade according to TJ 31543 to bring all vehicle nodes to the latest software status. The Upgrades list in VIDA should be empty before proceeding. *2. Download the appropriate SP below to prevent the above symptoms and re-enable ERS XC90: SP 31676890, CMQ VCM Fix S90: SP 31676891, CMQ VCM Fix 3. Drive the vehicle over 20mph to release the VCM from diagnostic mode. ERS will be unavailable until this is done. 4. Close and lock the vehicle for 3+ minutes to allow the network to shut down before testing ERS. PLEASE NOTE - DO NOT perform a Total Upgrade or VCM Upgrade after performing this procedure (they will now appear in the Upgrades list). Doing so will re-install the affected software. - Not all battery drains are caused by this issue. *The repair software will be integrated with regular VCM Upgrade/Reload and Total Upgrade/PDS/Service 2.0 packages in the coming weeks *This TJ will be updated when the updated software packages are available.

VCM software release can cause any or all of the above symptoms. *The current solution is to install VCM repair software by following the procedure below: 1. Perform a Total Upgrade according to TJ 31543 to bring all vehicle nodes to the latest software status. The Upgrades list in VIDA should be empty before proceeding. *2. Download the appropriate SP below to prevent the above symptoms and re-enable ERS XC90: SP 31676890, CMQ VCM Fix S90: SP 31676891, CMQ VCM Fix 3. Drive the vehicle over 20mph to release the VCM from diagnostic mode. ERS will be unavailable until this is done. 4. Close and lock the vehicle for 3+ minutes to allow the network to shut down before testing ERS. PLEASE NOTE - DO NOT perform a Total Upgrade or VCM Upgrade after performing this procedure (they will now appear in the Upgrades list). Doing so will re-install the affected software. - Not all battery drains are caused by this issue. *The repair software will be integrated with regular VCM Upgrade/Reload and Total Upgrade/PDS/Service 2.0 packages in the coming weeks *This TJ will be updated when the updated software packages are available.

VCM software release can cause any or all of the above symptoms. *The current solution is to install VCM repair software by following the procedure below: 1. Perform a Total Upgrade according to TJ 31543 to bring all vehicle nodes to the latest software status. The Upgrades list in VIDA should be empty before proceeding. *2. Download the appropriate SP below to prevent the above symptoms and re-enable ERS XC90: SP 31676890, CMQ VCM Fix S90: SP 31676891, CMQ VCM Fix 3. Drive the vehicle over 20mph to release the VCM from diagnostic mode. ERS will be unavailable until this is done. 4. Close and lock the vehicle for 3+ minutes to allow the network to shut down before testing ERS. PLEASE NOTE - DO NOT perform a Total Upgrade or VCM Upgrade after performing this procedure (they will now appear in the Upgrades list). Doing so will re-install the affected software. - Not all battery drains are caused by this issue. *The repair software will be integrated with regular VCM Upgrade/Reload and Total Upgrade/PDS/Service 2.0 packages in the coming weeks *This TJ will be updated when the updated software packages are available.

passenger compartment due to incorrect installation during vehicle assembly. If this condition should occur, it may result in moisture inside the passenger compartment, which could lead to air conditioning functionality issues. If the leakage has not been detected over a period of time, this condition could affect SRS systems (airbag), engine management systems etc. In such a case, the driver may experience various warning messages displayed in the Driver Information Module (DIM) identifying that a fault may be present and also providing guidance on how to proceed. Volvo therefore considers this a potential safety risk over time.

Customer may experience a high fan speed noise regardless of the fan speed selection. This may be due to accidentally touching the 2nd row display. A new logic in the CCM software was implemented 2016w46, that allows rear climate display to start in default mode 72/72 Auto with fan level 2. This will take place after every restart of engine. Service: Perform Total Upgrade according to TJ-31543.

To protect the throttle housing when using Volvo Car Showmode kit in the specified cars, always remove the connector from the throttle housing (see picture 34206.jpg) A new software for the BRIGO device is under development to avoid this damage. Make sure that the BRIGO device always updated with the latest software.

To protect the throttle housing when using Volvo Car Showmode kit in the specified cars, always remove the connector from the throttle housing (see picture 34206.jpg) A new software for the BRIGO device is under development to avoid this damage. Make sure that the BRIGO device always updated with the latest software.

Do not replace any parts for these cases. A new software for the ECM (engine control module) is under development and is planned to be released Q4-2018

ISSUING DEPARTMENT : CAR MARKET : United States and Canada TJ 19245 Technical Service PARTNER : ISSUE DATE : 3 US 7510 Volvo Cars North America YEAR MONTH DAY 2014 02 06 FUNC GROUP : FUNC DESC : 0 Publications Page 1 of 3 Attachment Vehicle Type Eng Struc Week Type Eng Sales Body Gear Steer Model Year Plant Chassis range Desc Range XXX 1927 - 9999 0000001 - 0999999 0 - 0 CSC Customer Symptom Codes Code Description 1C Administrative and Factory scheduled maintenance/Administrative and Factory scheduled maintenance DTC Diagnostic Trouble Codes Rows beginning with * are modified Note ! If using a printed copy of this Technical Journal, first check for the latest online version. Text In our Service Literature, a vehicle is often referred to by its ?type ?, not its ?model ?. For example the 1999 - 2006 Model Year S80 is type ?184? You may also see the designation, for example ?P2X?. This is referring to a platform type or vehicle family. If a document states ?P1X? or ?5XX? as an example, it will apply to all models within the platform type. ?54X? will apply to the ?544?, ?545? and ?542? models. ?X? represents variable data. ?Right first time in Time? Produced in the USA and available as an electronic document . Hard copy documents are printed in USA on recycled paper containing a minimum of 50% wastepaper and 10% post - consumer waste . 014 VOLVO CARS OF NORTH AMERICA, LLC Technical Journal 19245 Platform Model Type Model Years Comments P3 S80 124 2007 - V70 135 2008 - 2010 XC70 136 2008 - XC60 156 2010 - S60 134 2011 - V60 155 2015 - P2 S80 184 1999 - 2006 V70 285 2001 - 2007 XC70 295 2001 - 2007 S60 384 2001 - 2009 XC90 275 2003 - P1 S40 544 2004 - 2012 V50 545 2005 - 2012 C30 533 2007 - 2013 C70 542 2006 - 2013 X40 S40 644 2000 - 2004 V40 645 2000 - 2004 900 940 944 1991 - 1995 four cylinder, four door 940

( see attached sample files ). The sound may come from the balance shaft which is fitted in the oil sump area where the noise is most concentrated. A new design of the balance shaft is planned to be introduced 2018-Q2. Replace the balance shaft according the instructions in VIDA. Note: It's extremely important to adjust the new balance shaft with the correct tools according the instructions otherwise the sound may occur again in a short mileage.

( see attached sample files ). The sound may come from the balance shaft which is fitted in the oil sump area where the noise is most concentrated. A new design of the balance shaft is planned to be introduced 2018-Q2. Replace the balance shaft according the instructions in VIDA. Note: It's extremely important to adjust the new balance shaft with the correct tools according the instructions otherwise the sound may occur again in a short mileage.

high performance.Castrol EDGE Professional?s outstandingperformance has made it the oil of choice forVolvo and is the only Volvo recommendedengine oil.

PASSENGER COMPARTMENT DUE TO INCORRECT INSTALLATIONDURING VEHICLE ASSEMBLY. IF THIS CONDITION SHOULD OCCUR, IT MAY RESULT INMOISTURE INSIDE THE PASSENGER COMPARTMENT, WHICH COULD LEAD TO AIR CONDITIONING FUNCTIONALITY ISSUES. IF THE LEAKAGE HAS NOT BEEN DETECTED OVER APERIOD OF TIME, THIS CONDITION COULD AFFECT SRS SYSTEMS (AIRBAG), ENGINE MANAGEMENT SYSTEMS ETC. IN SUCH A CASE, THE DRIVER MAY EXPERIENCEVARIOUS WARNING MESSAGES DISPLAYED IN THE DRIVER INFORMATION MODULE(DIM) IDENTIFYING THAT A FAULT MAY BE PRESENT AND ALSO PROVIDING GUIDANCEON HOW TO PROCEED. VOLVO THEREFORE CONSIDERS THIS A POTENTIALSAFETY RISK OVER TIME.

P/N 9512957 COOLANT FILLING EQUIPMENT IS USED, IN ORDER TO PREVENT FUTURE OVER TEMPERATURE DAMAGE ON ENGINE.

Manually order and download software part number 32429456

Manually order and download software part number 32429456

Download the available total upgrade software.

Replace front brake pads

Download the available total upgrade software.

Action S39810 on certain model year 2017 S90 vehicles. Volvo has identified that the ABS (Antilock Brake System) wiring may chafe against the front driveshaft bellow. This condition will light a yellow Electronic Stability Control, (ESC) and red (ABS) warning lamp, and a text message ?ABS/ESC temporarily off? will appear in the instrument panel. If the fault is detected as permanent, a message ?Brake system service required? will be also appear in the instrument panel.

This condition will light a yellow Electronic Stability Control, (ESC) and red ABS warning lamp, and a text message ?ABS/ESC temporarily off? will appear in the instrument panel. If the fault is detected as permanent, a message ?Brake system service required? will be also appear in the instrument panel.

Action S39810 on certain model year 2017 S90 vehicles. Volvo has identified that the Anti-Lock Brake System (ABS) wiring may chafe against the front driveshaft bellow. This condition will light a yellow Electronic Stability Control, (ESC) and red (ABS) warning lamp, and a text message ?ABS/ESC temporarily off? will appear in the instrument panel. If the fault is detected as permanent, a message ?Brake system service required? will be also appear in the instrument panel. The corrective action is to check and if necessary adjust the ABS wiring per Technical Journal 32069.

Perform software upgrade.

Add new sealing on the HWAS box (Humidity Water Air Separator) and secure assembly of the box according to attached instruction.

Volvo Car USA LLC and Volvo Car of Canada Ltd (Volvo) on behalf of Volvo Car Corporation, has decided to launch Service Action S39816 on certain model year 2016 - 2017 XC90 and 2017 S90, V90CC and V90 vehicles. Volvo has identified that due to a software deviation in the Vehicle Dynamics Domain Master (VDDM) Primary Boot Loader (PBL), the vehicle may not start after it has been parked and the parking brake lamp will be lit in the instrument panel. The corrective action is to perform a VDDM PBL software upgrade.

(PBL), the vehicle may not start after it has been parked and the parking brake lamp will be lit in the instrument panel. Model Year 2016-2017 XC90, & 2017 S90, V90CC, V90

(customer behavoiur information) of a car is required from Volvo Car Corporation from external sources, either of these two documents should be filled in and attached to the affected Vehicle Report. (External sources: Authority, Insurance companies, Rental companies, etc)

Add new sealing on the HWAS box (Humidity Water Air Separator) and secure assembly of the box according to attached instruction.

If squealing noise occur from rear brakes 17" at low speed, follow advice under service. If symptom is confirmed, follow advice in VIDA regarding greasing method when changing the brake pads.

guideline has been developed, as an overview of the brake noise and indicates possible faults/solutions.

(customer behavoiur information) of a car is required from Volvo Car Corporation from external sources, either of these two documents should be filled in and attached to the affected Vehicle Report. (External sources: Authority, Insurance companies, Rental companies, etc)

If squealing noise occur from rear brakes 17" at low speed, follow advice under service. If symptom is confirmed, follow advice in VIDA regarding greasing method when changing the brake pads.

(customer behavoiur information) of a car is required from Volvo Car Corporation from external sources, either of these two documents should be filled in and attached to the affected Vehicle Report. (External sources: Authority, Insurance companies, Rental companies, etc)

the Centre Display for I-TPMS is showing a "spinning wheel", while calibration is ongoing. The calibration function itself is not changed compared to previous SW versions, it is only how it is presented in the center display that has been changed.A new calibration will start automatically as soon as the VDDM SW is upgraded.

Download software.

May 2017

When this happens the CCD and the center area of the DIM will go blank for a few moments and then start back up as if the vehicle has just been started up.

When this happens the CCD and the center area of the DIM will go blank for a few moments and then start back up as if the vehicle has just been started up.

When this happens the CCD and the center area of the DIM will go blank for a few moments and then start back up as if the vehicle has just been started up.

conditions, the height adjustment for the Head Up Display (HUD) returns to its default (full "up") setting at a vehicle restart.At this time, there is no permanent solution to this problem.

the Centre Display for I-TPMS is showing a "spinning wheel", while calibration is ongoing. The calibration function itself is not changed compared to previous SW versions, it is only how it is presented in the center display that has been changed.A new calibration will start automatically as soon as the VDDM SW is upgraded.

to objects that may shield radio communication between the remote control key and the car or could cause interference with they key signals..

to objects that may shield radio communication between the remote control key and the car or could cause interference with they key signals..

When this happens the CCD and the center area of the DIM will go blank for a few moments and then start back up as if the vehicle has just been started up.

When this happens the CCD and the center area of the DIM will go blank for a few moments and then start back up as if the vehicle has just been started up.

When this happens the CCD and the center area of the DIM will go blank for a few moments and then start back up as if the vehicle has just been started up.

follow the stepby step instructions. Going through thisprocess will ensure your customer continues toreceive their satellite radio programmingwithout any interruption of service. For SPAvehicles, the SiriusXM tuner is containedwithin the Infotainment Head Unit (IHU). Forall other vehicles, the tuner is the RemoteDigital Audio Receiver (RDAR).

THE NEW DISPLAY IS MORE RESISTANT TOSURFACE SCRATCHES. THE SCREEN PROTECTION FILM IS THEREFORE NOTSUPPLIED WITH THE VEHICLE FROM THE FACTORY FROM THE ABOVE CHASSIS BREAK POINTS. SERVICE: THE PROTECTIVE FILM IS NO LONGER SUPPLIED WITH THE VEHICLE FROM FACTORY AFTER CHASSIS BREAKPOINTS ABOVE AND MUST NOT BE CLAIMED UNDER WARRANTY. THE NEW CCD INTRODUCED FOR MY 2017 SUPERSEDES THE PREVIOUS CCD AS SPARE PART.

model year 2016 & 2017 XC90 & S90 vehicles. Condensation water, transferred through the air conditioning drain hose, may leak into the passenger compartment due to incorrect installation during vehicle assembly. If this condition should occur, it may result in moisture inside the passenger compartment, which could lead to air conditioning functionality issues.

(Volvo) on behalf of Volvo Car Group has decided to launch Recall R89707 on model year 2016 & 2017 XC90 & S90 vehicles. Condensation water, transferred through the air conditioning drain hose, may leak into the passenger compartment due to incorrect installation during vehicle assembly. If this condition should occur, it may result in moisture inside the passenger compartment, which could lead to air conditioning functionality issues.

replace the heater core according to the attached instruction.

Replace with new caps on wheel screws

the calendar function in the car and direct start of the climate settings from the app does work, please follow the advice under service. Service: Do not replace any parts or perform any fault-tracing. The fix will be in the Software upgrade package at the dates stated below: *- 2018 week 19 there is a software release for XC90, S90, V90 built from and including structure week 201746. *- 2018 week 22 there is a software release where the fix is included for the XC40, new XC60, XC90, S90, V90 built before structure week 201746. * Please perform a Total Upgrade in accordance with TJ 31543.

replace the heater core according to the attached instruction.

Total Upgrade should be used if there are any upgrades available. - Perform an IHU Reload

Perform action according to instructions for different car variants.

Perform action according to instructions for different car variants.

the calendar function in the car and direct start of the climate settings from the app does work, please follow the advice under service. Service: Do not replace any parts or perform any fault-tracing. The fix will be in the Software upgrade package at the dates stated below: *- 2018 week 19 there is a software release for XC90, S90, V90 built from and including structure week 201746. *- 2018 week 22 there is a software release where the fix is included for the XC40, new XC60, XC90, S90, V90 built before structure week 201746. * Please perform a Total Upgrade in accordance with TJ 31543.

New foam rings between upper actuators (4 zones) and shafts in the Climate unit have been implemented in plant from 2017w04. In case of customer complaints, install new foamrings according the attached instruction. S/V90 4-zone XC90 4-zone S/V90 2-zone XC90 2-zone

SUDDENLY STARTS TO BLOW HOT/COLD AIR. CCMSW NOW IMPLEMENTED 2016W38 IN PRODUCTIONAND FOR SERVICE. IN CASE OF CUSTOMERCOMPLAINTS, PERFORM CCM SW UPGRADEACCORDING TO VIDA. CHASSIS BREAK WILL BEUPDATED WHEN AVAILABLE.

If the result is not ok (air leak), it is ok to replace the headlamp

This logic of the cornering lights is now changed in the cars with software version 3.3.16 or later

If the result is not ok (air leak), it is ok to replace the headlamp

Complimentary Factory Scheduled Maintenance Program. Model Year 2013 and later vehicles, the service intervals are every 10,000 miles and ALL 2013 and later vehicles must use synthetic oil only.

Factory Scheduled Maintenance up to the first 3 years or 36,000 miles (whichever comes first) as recommended in the Volvo Warranty and Maintenance Information booklet.

At PDS and when attempting to diagnose a customer concern regarding voice controls not working or responding properly, make sure the vehicle has the latest voice control database installed.

At PDS and when attempting to diagnose a customer concern regarding voice controls not working or responding properly, make sure the vehicle has the latest voice control database installed.

your servicing distribution center.

then this could be caused by a HW problem in the Side Object Detection radar (SODL/SODR). In case of customer complaints for above symptom is confirmed, replace the SODL or SODR on the side for which the symptom is shown and download software SOD Reload.

the latest map upgrade for SPA vehicles (SPJ 29181) and must be downloaded separately from the maps. When performing PDS or diagnosing any voice control issue, always ensure that the latest speech database file is installed in the IHU.

Warranty GROUP : NO : ISSUING DEPARTMENT : CAR MARKET : Warranty Canada 00 342C REFERENCE BULLETINS : DATE : YEAR MONTH DAY SERVICE SERVICE WARRANTY 2015 09 18 MANAGER WRITER ADMINISTRATOR Service Personnel : Read and initial Page 1 of 4 VOLVO LIFETIME REPLACEMENT PARTS & LABOUR WARRANTY CUSTOMER OFFER To further enhance the Volvo ownership experience , Volvo Cars of Canada Corp . is offering the Volvo Lifetime Replacement Parts & Labour Warranty . Volvo warrants to the original retail purchaser of each new genuine Volvo replacement part ( excluding accessories and consumable parts as listed below ) that such part installed at an authorized Volvo retailer will be free from defects in material or workmanship . This would exclude any defects caused by outside influence . Coverage under the Lifetime Replacement Parts & Labour Warranty includes the labour to replace the covered replacement part . This warranty is nontransferable . COVERAGE Beginning with repairs dated on or after September 15 , 2015 , the original retail purchaser of a new genuine Volvo replacement part purchased and installed at an authorized Volvo retailer will be eligible for the Volvo Lifetime Replacement Parts & Labour Warranty . Parts and labour coverage under this Lifetime Warranty are only applicable when the new replacement part has been purchased and installed at an authorized Volvo retailer . Parts sold over the counter that are not installed by an authorized Volvo retailer are covered by Volvo?s one year parts only warranty . ? Right first time in Time ? Produced in the USA and available as an electronic document . Hard copy documents are printed in USA on recycled paper containing a minimum of 50 % wastepaper and 10 % post - consumer waste . 2015 VOLVO CARS OF NORTH AMERICA , LLC Service Manager Bulletin 00 - 342C As part of the vehicle?s normal service and maintenance

At PDS and when attempting to diagnose a customer concern regarding voice controls not working or responding properly, make sure the vehicle has the latest voice control database installed.

Download software fix

Download software fix

At PDS and when attempting to diagnose a customer concern regarding voice controls not working or responding properly, make sure the vehicle has the latest voice control database installed.

At PDS and when attempting to diagnose a customer concern regarding voice controls not working or responding properly, make sure the vehicle has the latest voice control database installed.

then this could be caused by radar reflection from material around the SOD. Then follow the advice under Service. Install the service kit PN 32217315 according to TJ instruction.

certain model year 2016 - 2017 XC90, S90, XC60, V60CC, V60, S60, S60CC, S60 Inscription vehicles. The affected vehicles may have not had the front passenger seatbelt buckle stud punched correctly. This may result in a separation between the buckle and the seat belt bracket. If this were to occur, it could increase the risk of injury to a front passenger seat occupant in a vehicle crash.

certain model year 2017 XC90, S90, V90CC and V90 vehicles. Due to a manufacturing error in the surface treatment process, the bolts that were used to assemble the inflatable curtain (IC) airbag may not meet specifications. This could result in one or more of the bolts breaking within 48 hours of installation, which in the event of a crash warranting deployment of the IC airbag, could increase the risk of injury to vehicle occupants. The correction action is for Volvo retailers to replace all of the inflatable curtain bolts.

certain model year 2017 XC90, S90, V90CC and V90 vehicles. Due to a manufacturing error in the surface treatment process, the bolts that were used to assemble the inflatable curtain (IC) airbag may not meet specifications. This could result in one or more of the bolts breaking within 48 hours of installation, which in the event of a crash warranting deployment of the IC airbag, could increase the risk of injury to vehicle occupants. The correction action is for Volvo retailers to replace all of the inflatable curtain bolts.

certain model year 2017 XC90, S90, V90CC and V90 vehicles. Due to a manufacturing error in the surface treatment process, the bolts that were used to assemble the inflatable curtain (IC) airbag may not meet specifications. This could result in one or more of the bolts breaking within 48 hours of installation, which in the event of a crash warranting deployment of the IC airbag, could increase the risk of injury to vehicle occupants. The correction action is for Volvo retailers to replace all of the inflatable curtain bolts.

certain model year 2017 XC90, S90, V90CC and V90 vehicles. Due to a manufacturing error in the surface treatment process, the bolts that were used to assemble the inflatable curtain (IC) airbag may not meet specifications. This could result in one or more of the bolts breaking within 48 hours of installation, which in the event of a crash warranting deployment of the IC airbag, could increase the risk of injury to vehicle occupants. The correction action is for Volvo retailers to replace all of the inflatable curtain bolts.

certain model year 2017 XC90, S90, V90CC and V90 vehicles. Due to a manufacturing error in the surface treatment process, the bolts that were used to assemble the inflatable curtain (IC) airbag may not meet specifications. This could result in one or more of the bolts breaking within 48 hours of installation, which in the event of a crash warranting deployment of the IC airbag, could increase the risk of injury to vehicle occupants. The correction action is for Volvo retailers to replace all of the inflatable curtain bolts.

certain model year 2017 XC90, S90, V90CC and V90 vehicles. Due to a manufacturing error in the surface treatment process, the bolts that were used to assemble the inflatable curtain (IC) airbag may not meet specifications. This could result in one or more of the bolts breaking within 48 hours of installation, which in the event of a crash warranting deployment of the IC airbag, could increase the risk of injury to vehicle occupants. The correction action is for Volvo retailers to replace all of the inflatable curtain bolts.

Seat Belt Extender.

Add adhesive tape.

Seat Belt Extender.

Add adhesive tape.

Seat Belt Extender.

Seat Belt Extender.

Add resister in line jumper cable.

Add resister in line jumper cable.

A new IHU (Integrated Head Unit) software with changed functionality has been introduced in week 46, 2016. Download a Total Upgrade in accordance with VIDA (Vehicle Information and Diagnostics for Aftersales) instructions and TJ 31543. The new software can be used on all cars from production start.

DEPARTMENT : CAR MARKET : United States and Canada TJ 29012 Technical Service PARTNER : ISSUE DATE : 3 US 7510 Volvo Cars North America YEAR MONTH DAY 2015 06 26 FUNC GROUP : FUNC DESC : 8811 Instrument panel Page 1 of 3 Attachment File Name File Size Leather dashboard.jpg 1.2691 MB Vehicle Type Eng Struc Week Type Eng Sales Body Gear Steer Model Year Plant Chassis range Desc Range 124 2012 - 2015 0151101 - 0182120 201120 - 201402 136 2012 - 2015 0118101 - 0191314 201120 - 201402 156 2014 - 2015 0500127 - 0755266 201320 - 201416 542 2012 - 2013 0123001 - 0144301 201146 - 201325 CSC Customer Symptom Codes Code Description L9 Instrument panel / dashboard / Loose , poor fit , warped , wrinkled N2 Instrument panel / dashboard / Blistered / bubbled / peeled VST Operation Number VST Operation Number Description 88107 - 2 Dashboard replace . ? Right first time in Time ? Produced in the USA and available as an electronic document . Hard copy documents are printed in USA on recycled paper containing a minimum of 50 % wastepaper and 10 % post - consumer waste . 2015 VOLVO CARS OF NORTH AMERICA , LLC Technical Journal 29012 DTC Diagnostic Trouble Codes Rows beginning with * are modified Note ! If using a printed copy of this Technical Journal , first check for the latest online version . Text DESCRIPTION : Leather on dashboard may come loose on small areas . PRODUCT MODIFICATION : The amount of glue used for fastening the leather has been increased and * finetuned . Process has been optimized and more measurements introduced . MATERIAL RETURN : Material for analysis can be requested in Vehicle Report . In other cases , follow normal routines . Vehicle Report : When submitting a Vehicle Report for a condition described in this TJ , use concern area ? Vehicle Report and sub concern area ? Support Not Needed ? with function group 8811 . Service : I

Due to an internal can bus data error in the TCM, harsh garage shifts may occur at P-R, R-D, N-D. New improved TCM SW is planned to be released 2017w22 in production and service. If you have a customer complaint at this time, perform a TCM reload. This will reset the values of the TCM and improve shift quality .

Due to an internal can bus data error in the TCM, harsh garage shifts may occur at P-R, R-D, N-D. New improved TCM SW is planned to be released 2017w22 in production and service. If you have a customer complaint at this time, perform a TCM reload. This will reset the values of the TCM and improve shift quality .

DEPARTMENT : CAR MARKET : United States and Canada TJ 29012 Technical Service PARTNER : ISSUE DATE : 3 US 7510 Volvo Cars North America YEAR MONTH DAY 2015 06 26 FUNC GROUP : FUNC DESC : 8811 Instrument panel Page 1 of 3 Attachment File Name File Size Leather dashboard.jpg 1.2691 MB Vehicle Type Eng Struc Week Type Eng Sales Body Gear Steer Model Year Plant Chassis range Desc Range 124 2012 - 2015 0151101 - 0182120 201120 - 201402 136 2012 - 2015 0118101 - 0191314 201120 - 201402 156 2014 - 2015 0500127 - 0755266 201320 - 201416 542 2012 - 2013 0123001 - 0144301 201146 - 201325 CSC Customer Symptom Codes Code Description L9 Instrument panel / dashboard / Loose , poor fit , warped , wrinkled N2 Instrument panel / dashboard / Blistered / bubbled / peeled VST Operation Number VST Operation Number Description 88107 - 2 Dashboard replace . ? Right first time in Time ? Produced in the USA and available as an electronic document . Hard copy documents are printed in USA on recycled paper containing a minimum of 50 % wastepaper and 10 % post - consumer waste . 2015 VOLVO CARS OF NORTH AMERICA , LLC Technical Journal 29012 DTC Diagnostic Trouble Codes Rows beginning with * are modified Note ! If using a printed copy of this Technical Journal , first check for the latest online version . Text DESCRIPTION : Leather on dashboard may come loose on small areas . PRODUCT MODIFICATION : The amount of glue used for fastening the leather has been increased and * finetuned . Process has been optimized and more measurements introduced . MATERIAL RETURN : Material for analysis can be requested in Vehicle Report . In other cases , follow normal routines . Vehicle Report : When submitting a Vehicle Report for a condition described in this TJ , use concern area ? Vehicle Report and sub concern area ? Support Not Needed ? with function group 8811 . Service : I

MARKET : United States and Canada TJ 25153 Technical Service PARTNER : ISSUE DATE : STATUS DATE : 3 US 7510 Volvo Car USA 2016 - 03 - 17 2016 - 03 - 24 FUNC GROUP : FUNC DESC : 3634 Washer Page 1 of 24 Attachment File Name File Size TJ 25153 S60 MY11 - , V60 , S60 , V60CC.pdf 0.8349 MB TJ 25153 S80 MY07 - , V70 MY08 - , XC70 MY08 - . pdf 0.7857 MB TJ 25153 S90 ( 234 ) MY17 - . pdf 1.4623 MB TJ 25153 V90V90CC ( 235236 ) MY17 - . pdf 1.5192 MB TJ 25153 XC90 ( 256 ) MY16 - . pdf 2.1365 MB TJ 25153_XC60 . pdf 0.8801 MB Vehicle Type Eng Struc Week Type Eng Sales Body Gear Steer Model Year Plant Chassis range Desc Range 124 2007 - 9999 0000850 - 9999999 200605 - 999952 134 2011 - 9999 0000194 - 9999999 201020 - 999952 135 2008 - 9999 0000395 - 9999999 200720 - 999952 136 2008 - 9999 0000400 - 9999999 200720 - 999952 138 2016 - 9999 0000122 - 9999999 201345 - 999952 155 2015 - 9999 0001147 - 9999999 201035 - 999952 156 2009 - 9999 0000212 - 9999999 200835 - 999952 157 2016 - 9999 0000022 - 9999999 201450 - 999952 234 2017 - 9999 0000001 - 9999999 201617 - 999952 235 2017 - 9999 0000001 - 9999999 201617 - 999952 236 2017 - 9999 0000001 - 9999999 201617 - 999952 256 2016 - 9999 0000001 - 9999999 201505 - 999952 ? Right first time in Time ? Produced in the USA and available as an electronic document . Hard copy documents are printed in USA on recycled paper containing a minimum of 50 % wastepaper and 10 % post - consumer waste . 2016 VOLVO CAR USA , LLC Technical Journal 25153 CSC Customer Symptom Codes Code Description 1U Washer fluid reservoir / hoses / Leakage VST Operation Number DTC Diagnostic Trouble Codes Rows beginning with * are modified Note ! If using a printed copy of this Technical Journal , first check for the latest online version . Text DESCRIPTION : If leakage occurs in the washer system at any of the multiple

ISSUING DEPARTMENT : CAR MARKET : United States and Canada TJ 19245 Technical Service PARTNER : ISSUE DATE : 3 US 7510 Volvo Cars North America YEAR MONTH DAY 2014 02 06 FUNC GROUP : FUNC DESC : 0 Publications Page 1 of 3 Attachment Vehicle Type Eng Struc Week Type Eng Sales Body Gear Steer Model Year Plant Chassis range Desc Range XXX 1927 - 9999 0000001 - 0999999 0 - 0 CSC Customer Symptom Codes Code Description 1C Administrative and Factory scheduled maintenance / Administrative and Factory scheduled maintenance DTC Diagnostic Trouble Codes Rows beginning with * are modified Note ! If using a printed copy of this Technical Journal , first check for the latest online version . Text In our Service Literature , a vehicle is often referred to by its ? type ? , not its ? model ? . For example the 1999 - 2006 Model Year S80 is type ? 184 ? . You may also see the designation , for example ? P2X ? . This is referring to a platform type or vehicle family . If a document states ? P1X ? or ? 5XX ? as an example , it will apply to all models within the platform type . ? 54X ? will apply to the ? 544 ? , ? 545 ? and ? 542 ? models . ? X ? represents variable data . ? Right first time in Time ? Produced in the USA and available as an electronic document . Hard copy documents are printed in USA on recycled paper containing a minimum of 50 % wastepaper and 10 % post - consumer waste . 2014 VOLVO CARS OF NORTH AMERICA , LLC Technical Journal 19245 Platform Model Type Model Years Comments P3 S80 124 2007 - V70 135 2008 - 2010 XC70 136 2008 - XC60 156 2010 - S60 134 2011 - V60 155 2015 - P2 S80 184 1999 - 2006 V70 285 2001 - 2007 XC70 295 2001 - 2007 S60 384 2001 - 2009 XC90 275 2003 - P1 S40 544 2004 - 2012 V50 545 2005 - 2012 C30 533 2007 - 2013 C70 542 2006 - 2013 X40 S40 644 2000 - 2004 V40 645 2000 - 2004 900 940 9

Due to an internal can bus data error in the TCM, harsh garage shifts may occur at P-R, R-D, N-D. New improved TCM SW is planned to be released 2017w22 in production and service. If you have a customer complaint at this time, perform a TCM reload. This will reset the values of the TCM and improve shift quality .

Technical Service PARTNER : ISSUE DATE : 3 US 7510 Volvo Cars North America YEAR MONTH DAY 2012 10 11 FUNC GROUP : FUNC DESC : 3521 Headlamp , complete Page 1 of 24 Attachment File Name File Size S80 - V70 - XC70 . pdf 0.5641 MB S60 - XC60 . pdf 0.5868 MB C30 - S40 - V50 - C70 . pdf 0.4175 MB XC90 . pdf 0.6020 MB Vehicle Type Eng Struc Week Type Eng Sales Body Gear Steer Model Year Plant Chassis range Desc Range 124 2007 - 9999 0000850 - 9999999 200605 - 999952 134 2011 - 9999 0000194 - 9999999 201020 - 999952 135 2008 - 2010 0000395 - 9999999 200720 - 999952 136 2008 - 9999 0000400 - 9999999 200720 - 999952 156 2010 - 9999 0000395 - 9999999 200720 - 999952 275 2003 - 9999 0000690 - 9999999 200232 - 999952 533 2007 - 9999 0000261 - 9999999 200637 - 999952 542 2006 - 9999 0000590 - 0999999 200549 - 999952 544 2004 - 2010 0000295 - 0999999 200339 - 999952 545 2004 - 2010 0000133 - 0999999 200347 - 999952 CSC Customer Symptom Codes Code Description W4 Headlights / Moisture / mist on inside of lens WG Headlights / Lens broken / chipped / cracked / distorted ? Fixed Right ? First Time ? Produced in the USA and available as an electronic document . Hard copy documents are printed in USA on recycled paper containing a minimum of 50 % wastepaper and 10 % post - consumer waste . 2012 VOLVO CARS OF NORTH AMERICA , LLC Technical Journal 17076 DTC Diagnostic Trouble Codes Text CSC = Customer Symptom Code DTC = Diagnostic Trouble Code Note ! If using a printed copy of this Retailer Technical Journal , first check for the latest online version . DESCRIPTION : The headlamp assembly may have condensation caused by moisture inside of lens . Some condensation is normal and not considered a defect . Automotive lamps are designed as an open system and atmospheric humidity can enter the lamp and also exit . The moisture disappears over a time period through the air v

ISSUING DEPARTMENT : CAR MARKET : United States and Canada TJ 19245 Technical Service PARTNER : ISSUE DATE : 3 US 7510 Volvo Cars North America YEAR MONTH DAY 2014 02 06 FUNC GROUP : FUNC DESC : 0 Publications Page 1 of 3 Attachment Vehicle Type Eng Struc Week Type Eng Sales Body Gear Steer Model Year Plant Chassis range Desc Range XXX 1927 - 9999 0000001 - 0999999 0 - 0 CSC Customer Symptom Codes Code Description 1C Administrative and Factory scheduled maintenance / Administrative and Factory scheduled maintenance DTC Diagnostic Trouble Codes Rows beginning with * are modified Note ! If using a printed copy of this Technical Journal , first check for the latest online version . Text In our Service Literature , a vehicle is often referred to by its ? type ? , not its ? model ? . For example the 1999 - 2006 Model Year S80 is type ? 184 ? . You may also see the designation , for example ? P2X ? . This is referring to a platform type or vehicle family . If a document states ? P1X ? or ? 5XX ? as an example , it will apply to all models within the platform type . ? 54X ? will apply to the ? 544 ? , ? 545 ? and ? 542 ? models . ? X ? represents variable data . ? Right first time in Time ? Produced in the USA and available as an electronic document . Hard copy documents are printed in USA on recycled paper containing a minimum of 50 % wastepaper and 10 % post - consumer waste . 2014 VOLVO CARS OF NORTH AMERICA , LLC Technical Journal 19245 Platform Model Type Model Years Comments P3 S80 124 2007 - V70 135 2008 - 2010 XC70 136 2008 - XC60 156 2010 - S60 134 2011 - V60 155 2015 - P2 S80 184 1999 - 2006 V70 285 2001 - 2007 XC70 295 2001 - 2007 S60 384 2001 - 2009 XC90 275 2003 - P1 S40 544 2004 - 2012 V50 545 2005 - 2012 C30 533 2007 - 2013 C70 542 2006 - 2013 X40 S40 644 2000 - 2004 V40 645 2000 - 2004 900 940 9

U023292 REF NO : ISSUING DEPARTMENT : CAR MARKET : United States and Canada TJ 30858 Technical Service PARTNER : ISSUE DATE : STATUS DATE : 3 US 7510 Volvo Cars North America 2015 - 10 - 16 2015 - 10 - 21 FUNC GROUP : FUNC DESC : 3872 Collision avoidance Page 1 of 2 Attachment Vehicle Type Eng Struc Week Type Eng Sales Body Gear Steer Model Year Plant Chassis range Desc Range 256 2016 - 2016 0000516 - 0035745 201505 - 201539 CSC Customer Symptom Codes Code Description XR Blind spot information system ( BLIS ) / Does not work IV Text window and warning symbol / Text message VST Operation Number VST Operation Number Description 36004 - 2 Software control module downloading DTC Diagnostic Trouble Codes Text ? Right first time in Time ? Produced in the USA and available as an electronic document . Hard copy documents are printed in USA on recycled paper containing a minimum of 50 % wastepaper and 10 % post - consumer waste . 2015 VOLVO CARS OF NORTH AMERICA , LLC Technical Journal 30858 DESCRIPTION : Note ! If using a printed copy of this Technical Journal , first check for the latest online version . If a warning message ? BLIS system service required ? occurs in DIM together with DTC SODR - U023292 or / and SODL - U023292 , then follow the advice under SERVICE . Vehicle Report : Only if this TJ does not solve the problem or if the symptom would occur after the chassis number ranges above . Use concern area ? Vehicle Report ? and sub concern area ? Support Needed ? , use function group 3872 . Service : In case of customer complaints for above symptom , download SOD upgrade . ( side object detection module ) Page 2 of 2 2015 - 10 - 21

on the right side of the steering wheel may not function (marked as ?1?, ?2?and ?3? in attachment). The buttons ?Speech?, ?Open/Close Menu? and ?volume adjustment? are still operational. See https://youtu.be/OLdEk-NskVQ

Check rubber gromet in firewall

If the mentioned symptom occurs, the driver can push the button "Open/Close Menu" twice (marked as "4" in attachment) as a temporary solution. There is no need to replace any parts due to this symptom; it will be corrected in a future software.

If the mentioned symptom occurs, the driver can push the button "Open/Close Menu" twice (marked as "4" in attachment) as a temporary solution. There is no need to replace any parts due to this symptom; it will be corrected in a future software.

Windshield Wiper or Turn Signal service even though the wipers and turn signals are working properly.Replace the lever hub and both switches,