2026 Volvo EX30 TSBs

Start fault tracing by checking the following: 1.The condition of the EVI for damage and/or foreign objects. - Sample images can be found on page 1 of the attached PDF file. 2.The connectors at the CDD: unplug, then plug them in again. - Relevant connectors are numbers 1, 2, 6, and 9 on the drawing on page 2 of the attached PDF file. If no deviations are found at the EVI or the connectors at the CDD, continue fault tracing in VIDA.

Check if the vehicle's software is the latest version. If not the latest version, please perform a Total Upgrade

Start fault tracing by checking the following: 1.The condition of the EVI for damage and/or foreign objects. - Sample images can be found on page 1 of the attached PDF file. 2.The connectors at the CDD: unplug, then plug them in again. - Relevant connectors are numbers 1, 2, 6, and 9 on the drawing on page 2 of the attached PDF file. If no deviations are found at the EVI or the connectors at the CDD, continue fault tracing in VIDA.

Start fault tracing by checking the following:
 1.The condition of the EVI for damage and/or foreign objects.
 - Sample images can be found on page 1 of the attached PDF file.
 2.The connectors at the CDD: unplug, then plug them in again.
 - Relevant connectors are numbers 1, 2, 6, and 9 on the drawing on page 2 of the attached PDF file.
 If no deviations are found at the EVI or the connectors at the CDD, continue fault tracing in VIDA.

Start fault tracing by checking the following:
 1.The condition of the EVI for damage and/or foreign objects.
 - Sample images can be found on page 1 of the attached PDF file.
 2.The connectors at the CDD: unplug, then plug them in again.
 - Relevant connectors are numbers 1, 2, 6, and 9 on the drawing on page 2 of the attached PDF file.
 If no deviations are found at the EVI or the connectors at the CDD, continue fault tracing in VIDA.

Check if the vehicle's software is the latest version. If not the latest version, please perform a Total Upgrade

software version installed in the vehicle (this may occur after a failed software download), and no Total Upgrade is available in VIDA, Note! Do not replace any parts. A Software Product is available to align the software version in the CSD with the actual software version installed in the vehicle. Use "manual order" as Software Product is not visible in VIDA.

software version installed in the vehicle (this may occur after a failed software download), and no Total Upgrade is available in VIDA, Note! Do not replace any parts. A Software Product is available to align the software version in the CSD with the actual software version installed in the vehicle. Use "manual order" as Software Product is not visible in VIDA.

screen/glass within 6 months in service we request more information, follow advise under "Service".

screen/glass within 6 months in service we request more information, follow advise under "Service".

Unit) settings and the pattern/PIN code has been forgotten, please follow advice under "Service".

Do not replace any microphone hardware. A new software (SW) is planned to be released in the beginning of quarter 3 year 2025.

This TJ will be regularily updated as items are added or removed from prior approval.
 Current items under prior approval are listed in the "Service" section

symbol, please follow the advice under "Service". After v1.7.1 SW, it is possible that the exclamation mark in the connectivity symbol is present intermittently, regardless of good or bad internet connectivity. It does not depict the true status of the internet connection.
 This is a known issue and will be fixed in the upcoming Software release. The software version is to be determined and this TJ will be updated accordingly.
 Please see attached video TJ_37528_1 for reference.

or bike carrier, follow the advice under "Service". A software solution was released in 2025 week 40, with version 1.7.1. If urgent, perform a software upgrade according to TJ 31543. Note: After the upgrade, only ACC will be available when a trailer or bike carrier is connected. PA will remain unavailable.

If error 502 appears in VIDA when ordering PDS software, please perform an EVCC reload with the checkbox marked "YES" for new hardware.
 EVCC reload part number: 80012578

If the result is not ok (air leak), it is ok to replace the headlamp

If the result is not ok (air leak), it is ok to replace the headlamp

If the result is not ok (air leak), it is ok to replace the headlamp

Do not replace any parts.
 To recover the CEM, download SP 80026889, "OTA RESTORE".
 After this has been installed, confirm that the car can now be started and driven.
 Ensure that the car has the latest software by following TJ-31543

installation, follow advise under "Service". Dont replace any parts. Follow the instruction below.

Ignore the DTC; nothing needs to be done. This is a ghost DTC, with no actual impact on vehicle functionality.

vehicle shows symptoms of a faulty PAS without specific part defects and one (or more) of the DTCs mentioned below is set, follow the advice under "Service."

We have seen unnecessary replacements of the complete mirror. Before replacing any parts, follow the instuctions in this Technical Journal.

We have seen unnecessary replacements of the complete mirror.
 Before replacing any parts, follow the instuctions in this Technical Journal.

in the DIM, and both BECM-P2C871A and VCU1-P128300 DTCs are present, follow the advice under "Service - Confirm that all criteria specified in the "Description" section are fulfilled.
 Replace the CDD in accordance with VIDA instructions.

in the DIM, and both BECM-P2C871A and VCU1-P128300 DTCs are present, follow the advice under "Service - Confirm that all criteria specified in the "Description" section are fulfilled.
 Replace the CDD in accordance with VIDA instructions.

Vehicle type and platform identification.

RSI, ISA and ALCA are planned to be introduced in the OTA release that is planned to be sent out to customers Q3 2025

If the sound corresponds to attached sound file, change front drive shafts to the below part numbers.