2026 Volkswagen Tiguan TSBs

address (0013_ indicates that the view of the front camera for driver assist systems diagnostic address (00A5) is/was temporarily restricted.

or Coolant warning message in instrument cluster; Customer states error for Dynamic Cornering Light in MFI; Customer states no start condition; Customer states no start condition; Customer states wind noise and or water ingress; Customer states there is a noise when pressing the brake pedal; Customer states there is a leak from the front of the vehicle

from the cylinder head gasket, Low coolant level, Visible coolant leak, or Coolant warning message in instrument cluster; Customer states no start condition; Customer states no start condition; Customer states wind noise and or water ingress; Customer states there is a noise when pressing the brake pedal; Customer states there is a leak from the front of the vehicle

from the cylinder head gasket, Low coolant level, Visible coolant leak, or Coolant warning message in instrument cluster; Customer states no start condition; Customer states no start condition; Customer states wind noise and or water ingress; Customer states there is a noise when pressing the brake pedal; Customer states there is a leak from the front of the vehicle

If this occurs, the 12volt battery could gradually discharge while the vehicle is turned off. Under this service action, Volkswagen is providing an ECM software update to ensure the control module shuts down properly and to help prevent unnecessary battery drain. Updated ECM software version table to include additional versions

If this occurs, the 12volt battery could gradually discharge while the vehicle is turned off. Under this service action, Volkswagen is providing an ECM software update to ensure the control module shuts down properly and to help prevent unnecessary battery drain.

If this occurs, the 12volt battery could gradually discharge while the vehicle is turned off. Under this service action, Volkswagen is providing an ECM software update to ensure the control module shuts down properly and to help prevent unnecessary battery drain. Updated ECM software version table to include additional versions

If this occurs, the 12volt battery could gradually discharge while the vehicle is turned off. Under this service action, Volkswagen is providing an ECM software update to ensure the control module shuts down properly and to help prevent unnecessary battery drain.

warning light on, harsh shifting; Coolant leak from the cylinder head gasket, Low coolant level, Visible coolant leak, or Coolant warning message in instrument cluster; Customer states no start condition; Customer states no start condition; Customer states wind noise and or water ingress; Customer states there is a leak from the front of the vehicle

warning light on, harsh shifting; Coolant leak from the cylinder head gasket, Low coolant level, Visible coolant leak, or Coolant warning message in instrument cluster; Customer states no start condition; Customer states wind noise and or water ingress; Customer states there is a leak from the front of the vehicle

warning light on, harsh shifting; Coolant leak from the cylinder head gasket, Low coolant level, Visible coolant leak, or Coolant warning message in instrument cluster; Customer states multiple driver assist lights on; Customer states no start condition; Customer states wind noise and or water ingress; Customer states there is a leak from the front of the vehicle

states transmission error on dash/unable to move shifter out of park; Coolant leak from the cylinder head gasket, Low coolant level, Visible coolant leak, or Coolant warning message in instrument cluster; Customer states multiple driver assist lights on; Customer states no start condition; Customer states wind noise and or water ingress; Customer states there is a leak from the front of the vehicle

improvements to the ECM calibration for the turbocharger variable turbine geometry (VTG) actuator endpoints. This has no impact on vehicle emissions. Updated affected vehicles chart. Added note to the work instructions regarding fault code P160900.

improvements to the ECM calibration for the turbocharger variable turbine geometry (VTG) actuator endpoints. This has no impact on vehicle emissions.

improvements to the ECM calibration for the turbocharger variable turbine geometry (VTG) actuator endpoints. This has no impact on vehicle emissions. Updated affected vehicles chart. Added note to the work instructions regarding fault code P160900.

improvements to the ECM calibration for the turbocharger variable turbine geometry (VTG) actuator endpoints. This has no impact on vehicle emissions.

states transmission error on dash/unable to move shifter out of park; Coolant leak from the cylinder head gasket, Low coolant level, Visible coolant leak, or Coolant warning message in instrument cluster; Customer states no start condition; Customer states wind noise and or water ingress; Customer states there is a leak from the front of the vehicle

states transmission error on dash/unable to move shifter out of park; Coolant leak from the cylinder head gasket, Low coolant level, Visible coolant leak, or Coolant warning message in instrument cluster; Customer states dynamic road sign assist error messages on instrument cluster and center display; Customer states no start condition; Customer states wind noise and or water ingress; Customer states there is a leak from the front of the vehicle

programming function: A software fix is needed to correct multiple test plans: All basic settings test for the following components - Fill and bleed cooling system issue, N493, J338, Camshaft, V465 etc. Use this test for all the basic setting. You will need to select the component you need to run the basic settings. But there are also stand-alone tests for each of those components.

states transmission error on dash/unable to move shifter out of park; Customer states MIL-on; Customer states dynamic road sign assist error messages on instrument cluster and center display; Customer states no start condition; Customer states wind noise and or water ingress; Customer states there is a noise coming from the clutch pedal/clutch pedal pin out of place; Customer states there is a leak from the front of the vehicle

states transmission error on dash/unable to move shifter out of park; Customer states MIL-on; Customer states dynamic road sign assist error messages on instrument cluster and center display; Customer states no start condition; Customer states wind noise and or water ingress; Customer states there is a noise coming from the clutch pedal/clutch pedal pin out of place; Customer states there is a noise coming from the front strut arae; Customer states there is a leak from the front of the vehicle

programming function: A software fix is needed to correct the issue: DA 0019 - Hotfix 12-V battery test(s) No battery diagnosis - Inconclusive test result.

programming function: A software fix is needed to correct the error message ERP0204E could occur during perform initial operation, software configuration, SVM updates for any control module(s) etc.

programming function: A software fix is needed to correct a test that is not reading any information from the battery data module (BDM) and will output:

programming function: A software fix is needed to correct various flash programming errors.

all 2026 model year vehicles and are actively working toward a resolution. We anticipate having this issue resolved early next week.

replacement airbag inflators that are being installed in used vehicles.