2013 Volkswagen Routan TSBs
407 Technical Service Bulletins across 17 categories
Categories
Other
120 bulletinsFluid requirements
Damage to Data Link Connector (DLC) from Aftermarket Devices (Cannot Communicate with Vehicle OBD System)
Vehicles equipped with Immobilizer 4 (Download) ? Adapting Keys after Vehicle Lock Set Replacement
GPS Antenna Concerns
Third Row Seating
In order to promptly receive your credit and to improve the level of parts that reach your customers: Please return your...
Read full bulletin
inventory of the above-listed material numbers to your facing PDC, no later than 12/10/13.
Volkswagen Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
Elsa newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
VW Elsa Newsletter
Quick Reference Specification Book
Squeaks, Rattles, Noise, Repair Materials
Helpline & Parts Dept.
Read full bulletin
contact information.
FLUID CAPACITY CHART
Ensuring a Perfect Delivery
RNS 315 Hardware Failure
RNS 315 Hardware Failure
Damage on External Chrome or Aluminum Surfaces
You must create a Volkswagen Technical Assistance (VTA) ticket and call the Tehnical Helpline prior to performing any...
Read full bulletin
repairs.
When diagnosing fault code P2279-Leaking Air in Intake System, be sure to check the cam timing first.
Recommended procedure for removing damaged CV boot.
CV boot damage identified.
ElsaWeb Newsletter
ElsaWeb Newsletter
Elsa Newsletter
Generator replacement.
Contacting the parts helpline
This Document informs dealers on VWP-23-01
Tech Tips.
Webinars and Job Aids.
ODIS Quick Reference Guide.
Part ordering
Third row seating.
VW Elsa Newsletter.
Parts ordering information
This Document was revised to include 2021 Model Year
Data link diagnostics and tips
This special notice is to inform dealers to return the part numbers listed (State of California only).
Mandatory fastener.
Electronic Stabilization Program (ESP) function test may not end on its own causing DTC.
New machine version added to table.
Volkswagen After Sales Weekly Communication - March 10, 2020
Include additional photo's of water ingress.
Read full bulletin
Also includes 2018-2020 Tiguan LWB
TT 001202........Also includes 2005 Jetta wagon and 2018-2020 Tiguan LWB
The part number listed in the document is to be returned if it meets the criteria provided.
Adhesive application for installation on all areo parts solds as an accessory
VAS 6154 Replacement Part Setup Guide
Adhesive application for installation on all areo parts solds as an accessory
This special notice is to inform dealers to return all part numbers listed in the document and order the superseded part...
Read full bulletin
numbers going forward.
This special notice is to inform dealers to return all part numbers listed in the document.
Read full bulletin
Only superseded part numbers to be ordered going forward.
This information bulletin contains instructions for checking the pins/terminals for contacts and nano contacts.
Reminder for dealers to reference the repair manual and replace all necessary fasteners (bolts, nuts) that cannot be...
Read full bulletin
re-used
additional symptom gathering information and guidence to isolate customer concern before beginning repair.
Tech Tips: Vehicles with Immobilizer with Download/Discharge? New Key Will Not Program
Tech Tips Damage to Data Link Connector (DLC) from Aftermarket Devices (Cannot Communicate with Vehicle OBD System)
TECH TIP DENOTING POTENTIAL FOR DAMAGE OF THE DATA LINK CONNECTOR WHEN USING AFTER MARKET PLUG IN DEVICES OR SCAN TOOLS...
Read full bulletin
AND SUBSEQUENT DIAGNOSTIC DIRECTION.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Engine
59 bulletinsIdentifying and Mixing Engine Coolant
Carefree Maintenance Coverage for Interim Oil Changes for Certain 2009 ? 2015 MY Volkswagen TDI Clean Diesel Engine...
Read full bulletin
Vehicles Registered in the State of Minnesota Only (US Dealers
Rattling Noises from Engine Compartment Area or Exhaust System
3.6L Gasoline Engine
Release of New Engine Coolant Organic Additive Technology (OAT)
Engine Oils Which Meet Volkswagen Oil Quality Standard VW 502 00/505 00/505 01 and VW 504 00/507 00
Engine Change Oil Indicator Message ON Prematurely (U.S.
Read full bulletin
Only)
Oil Consumption Measurement
Engine Change Oil Indicator Message ON Prematurely (U.S.
Read full bulletin
Only)
Oil Consumption Measurement
Proper Removal of Engine Cover to Avoid Breakage
Engine, Misfire Diagnostic Aid
Fuel Additive to Help Prevent Sporadic Misfire Faults
Fuel Additive to Help Prevent Sporadic Misfire Faults
Fuel Additive to Help Prevent Sporadic Misfire Faults
Fuel Additive to Help Prevent Sporadic Misfire Faults
Customers may complain of a rattling noise from engine or exhaust area while accelerating from 1800-3000 RPM.
To detect which line(s) is inoperative, utilize a volt meter to check for 0 V, which will be present after the open in the grid line.
Read full bulletin
The check must be performed with the engine running and heated rear window switched on. Switch OFF the ignition and visually locate the damage. Proceed with checking any other lines as necessary. Once the damaged line is identified, repair utilizing the Repair kit by Permatex ITEM 09117.
Wiper Motor Noisy or Inoperative
Activated Charcoal Filter System, Solenoid Valve 1 -N80- (Canister Purge Valve) Diagnosis
For an upcoming campaign that will include all MY09-14 TDI (CBEA/CJAA) vehicles, we need to test the SVM3339 code in 200...
Read full bulletin
vehicles of various model-years and engine/transmission combinations.
Because Volkswagen supports the development and use of renewable fuels (such as biodiesel fuel blends), customers with...
Read full bulletin
certain 2009-2015 MY Volkswagen TDI Clean Diesel Engine vehicles registered in the State of Minnesota only will receive a communication in July 2014 regarding the use of biodiesel fuel blends in their vehicles.
After a cold start, the engine coolant temperature gauge will slowly rise to approximately 190 F.
Read full bulletin
When the F265 mapped thermostat opens, the gauge may drop by approximately 60 F before again rising to 190 F. No repairs should be attempted for this normal concern. F265 is pictured below.
When diagnosing faults P0300, P0301, P0302, P0303, P0304, P0305, and/or P0306 for cylinder misfires, perform a Cylinder...
Read full bulletin
Combustion Pressure Leakage Test before replacing any components.
When diagnosing faults P0300, P0301, P0302, P0303, P0304, P0305, and/or P0306 for cylinder misfires, perform a Cylinder...
Read full bulletin
Combustion Pressure Leakage Test before replacing any components.
When servicing the timing chain sprocket or removing the vibration damper, be aware that one bolt holds both the...
Read full bulletin
vibration damper (harmonic balancer) and the crankshaft timing chain sprocket to the crankshaft. Once the damper is removed, the crankshaft should not be rotated unless special tool spacer T10368 has been installed. The crankshaft timing chain sprocket and spur gear drive on the crankshaft have a coupling that must be seated correctly during assembly. Failure to install special tool spacer T10368 before rotating engine will cause the engine to skip time and bend valves.
CBFA 2.0T TSI Engine
To identify a misfiring cylinder when a random fault is set (P0300), utilize the following; Select PCM (ECM) from the module menu (figure 1).
Read full bulletin
At the top of the screen, mouse over ?Monitors? to open the drop down list. Select OBD II monitors. From the OBD II monitor list (figure 2), scroll down and select ?Which cylinder is misfiring?(figure 3). A value block displaying all cylinder misfire counts can be viewed and also monitored while running to isolate the causal cylinder. Once the specific cylinder(s) have been isolated, proceed with misfire diagnosis to determine root cause and repair as necessary.
The transmission will skip select gears during shifts to allow the engine to operate at lower speeds.
Incorrect torque converter or flywheel/flexplate installation can result in transmission damage.
Read full bulletin
When installing an engine, flywheel or transmission, please follow the installation procedures outlined in ELSA. For the flywheel/flexplate, please be certain the correct shim is installed between it and the crankshaft (reference VWIQ120). When installing a torque converter, press the torque converter hub through the seal as far as the first stop. Turn the torque converter while pushing toward the transmission using light force, until the cut outs in the torque converter hub lock into the pump wheel plate. The torque converter slides in. The torque converter is installed correctly if it is easy to turn by hand and if it fits evenly in the transmission bell housing. Additionally, it should spin freely when the transmission bell housing bolts are torqued to the engine block, prior to installation of the flywheel to converter bolts (reference VWIQ121).
Turn the ignition key to the START position.
Read full bulletin
If the engine does not crank but a clicking noise can be heard from the starter, install a jumper cable from the battery negative cable to the engine block and attempt to start the engine again. If the engine now cranks perform the following Repair Procedure A. If it still does not crank, perform Repair Procedure B.
When diagnosis on the above engine leads to the testing of the N75, please refer to the picture below.
Read full bulletin
The diagram shows which vacuum ports on the N75 valve should hold vacuum and which ones should not.
When replacing the complete vehicle lock set (all vehicle keys and lock cylinders) for any reason, be aware that the...
Read full bulletin
?Adapt keys? test plan will not allow the new keys to adapt to the vehicle. Instead, perform the test plan for ?New identity?. During this test plan, make the appropriate selection to indicate only the lock set has been replaced, as shown below in figures 1 and 2.
Fuel Additive to Help Prevent Sporadic Misfire Faults
Fuel additive to help prevent sporadic misfire faults.
Engine oil quality standards, update to attachments.
VW Engine Oil Capacities.
Engine oil pressure priming.
Rattling noises from engine compartmen area or exhaust system.
Oil pressure priming after engine replacement or internal repair.
Update to Volkswagen engine oil standards.
Update to Volkswagen engine oil standards.
Gasoline Engine Misfire Diagnosis document
Technical Bulletin (Rattling Noises from Engine Compartment Area or Exhaust System): Customers may complain of a...
Read full bulletin
rattling noise from engine or exhaust area while accelerating from 1800-3000 RPM. In order to complete proper diagnosis and ensure that the noise is coming from the turbocharger use the procedure in this document.
Tech Tips (No Crank/ No Start Starter Will Not Engage and there are No Related Codes): This document informs of two...
Read full bulletin
procedures to preform if the engine does not crank but a clicking noise can be heard from the starter.
Warranty Information (VW Engine Oil Reimbursement Table ? VW Castrol Oil Program): This communication contains the...
Read full bulletin
?Volkswagen Engine Oil Reimbursement Table ? VW Castrol Oil Program? document which has been updated and is effective on October 1, 2013. This table is also available on WISE under Resource Center > Castrol Oil Program > VCOP Engine Oil Reimbursement Table.
Technical Bulletin (Rattling Noises from Engine Compartment Area or Exhaust System): Customers may complain of a...
Read full bulletin
rattling noise from engine or exhaust area while accelerating from 1800-3000 RPM. In order to complete proper diagnosis and ensure that the noise is coming from the turbocharger use the procedure in this document.
Tech Tips (No Crank/ No Start ?Starter Will Not Engage and there are No Related Codes): This document informs of two...
Read full bulletin
procedures to preform if the engine does not crank but a clicking noise can be heard from the starter.
Warranty Information (VW Engine Oil Reimbursement Table ? VW Castrol Oil Program): This communication contains the...
Read full bulletin
?Volkswagen Engine Oil Reimbursement Table ? VW Castrol Oil Program? document which has been updated and is effective on October 1, 2013. This table is also available on WISE under Resource Center > Castrol Oil Program > VCOP Engine Oil Reimbursement Table.
Engine replacement tip
Tech Tips (Technician Helpline Vehicle Check Sheets): When it becomes necessary to open a VW Technician Helpline VTA...
Read full bulletin
case while performing diagnosis for a diesel particulate filter, manual transmission repair, or turbocharger concern, it is recommended to complete the related worksheet/check sheet before calling. This document informs where Worksheets/Check Sheets are available on ServiceNet.
Tech Tips (cylinder misfires): This document informs When diagnosing faults for cylinder misfires, perform a Cylinder...
Read full bulletin
Combustion Pressure Leakage Test before replacing any components. This document informs of where to find the test procedure for the test
Technical Bulletin (Engine Change Oil Indicator Message ON Prematurely): Based on engine operating conditions, some...
Read full bulletin
Routan vehicles may display the ?change oil? indicator message more frequently than the every 6,000 miles (MY2009-2010), 8,000 miles (MY2011-2012) and 10,000 miles (MY2013-2014) scheduled maintenance intervals. In some instances, the ?change oil? indicator may illuminate as early as 2,500 miles (MY2009-2010) or 3,500 miles (MY 2011-2014) from the vehicle in-service date or from the last oil change. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
Tech Tips (Routan-Identifying Misfires using WiTech): This document informs that the cylinders in the Routan vehicle...
Read full bulletin
can be indivually diagnosed for issues.
Tech Tips: Oil Consumption Testing.
Read full bulletin
Depending on the mileage how much oil should the vehicle consumer for distance driven
Technical Bulletin (Cylinder Misfire issues): Customers may experience a Malfunction Indicator Lamp (MIL) illumination due to Cylinder Misfirings.
Read full bulletin
Using a Scan Tool (wiTECH) with Elsa and the appropriate Diagnostic Procedures, This document informs how to verify all engine systems are functioning as designed. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
Job Aid ? VW Engine Oil Capacities (Gasoline, Diesel, Hybrid Engines)
Technical Bulletin about a customer concern stating that customer observed one or more of the shocks/struts appearing to have an oil leak.
Read full bulletin
Document contains examples of Strut or Shock Absorber Leak Assessments
Tech Tips (2011-2014 Routan ? MIL ON, Fault P0300, P0301, P0302, P0303, P0304, P0305, and/or P0306 Stored In PCM): When...
Read full bulletin
diagnosing faults P0300, P0301, P0302, P0303, P0304, P0305, and/or P0306 for cylinder misfires, perform a Cylinder Combustion Pressure Leakage Test before replacing any components. Test procedure can be found in Elsa Repair Manual under Diagnostic Information
Electrical
48 bulletinsThis is a notice for software changes with the ODIS diagnostic program to correct the communication during vehicle...
Read full bulletin
programming function: A software fix is needed to correct a test that is not reading any information from the battery data module (BDM) and will output:
Washer Level Sensor
Washer Level Sensor
RNS 315 Navigation ? Bluetooth Module Location
AC Compressor Replacement, Refrigerant Circuit Flushing Requirement
MIL ON, DTCs P0300, P0302, P0304 or P0306 Stored in ECM Fault Memory
Customer May Experience a Discharged Battery
Battery, Use CCA when testing with the Midtronics MCR-340, Midtronics In-Charge 940 (INC 940), or VAS-6161
MIL ON, No Start, or Rough Running with DTCs P0087, P0088 or P0191 Stored in ECM Fault Memory (TDI ONLY)
MIL ON, No Start, or Rough Running with DTCs P0087, P0088 or P0191 Stored in ECM Fault Memory (TDI ONLY)
Washer Level Sensor
Air Conditioning, Cleaning of the Refrigerant Circuit (U.S.Only)
If key blade is found to stick or bind when opening or closing, check position of roll pin that secures key blade to mechanism.
Read full bulletin
If roll pin is sticking out on either side (as shown below), do not replace key. Instead, use appropriate sized punch and hammer to drive in the roll pin so that it is flush with edge of mechanism.
New Routan SEL vehicles should be equipped with a start/stop button which is to be inserted into the WIN module during PDI.
Read full bulletin
The button is shipped in the by-pack (found on the third row seat) as shown below.
Prior to testing the battery on any 2009 - 2014 Routan, first reference TB 2018694 (V271302) Battery, Use CCA when...
Read full bulletin
testing with the Midtronics MCR-340, Midtronics In-Charge 940 (INC 940), or VAS-6161.
Powertrain Control Module (PCM) Adaptation
The indicator lamp in the I.P.
Read full bulletin
for washer fluid remains illuminated and the washer reservoir is full. Validate the washer reservoir is full with the proper washer solvent (G-052-164). Refer to Elsa for proper fluid type and fluid quantities under repair manual, maintenance, fluid capacity table. If the fluid is not blue in color, drain the fluid, remove the sensor and clean with cleaner (D-009-401-04) or equivalent. Reinstall the sensor, top off washer reservoir with proper fluid and validate that the indicator lamp in the I.P. is no longer illuminated.
The indicator lamp in the I.P.
Read full bulletin
for washer fluid remains illuminated and the washer reservoir is full. Validate the washer reservoir is full with the proper washer solvent (G-052-164). Refer to Elsa for proper fluid type and fluid quantities under repair manual, maintenance, fluid capacity table. If the fluid is not blue in color, drain the fluid, remove the sensor and clean with cleaner (D-009-401-04) or equivalent. Reinstall the sensor, top off washer reservoir with proper fluid and validate that the indicator lamp in the I.P. is no longer illuminated.
The replacement Totally Integrated Power Module (TIPM) contains revised software that changes the TIPM operation and...
Read full bulletin
alters the front exterior lighting of the vehicle. The vehicle wiring may need to be modified to maintain turn signal operation.
The Bluetooth module has now been integrated into the navigation head unit on 2012-2013 vehicles with RNS 315 navigation...
Read full bulletin
part number 1K0 035 274 B or higher. The diagnosis for this system is similar to the 9W7 system. Technical Bulletin 91 11 09 (2026015) can be used for the diagnosis.
Electric coolant fans continue to run after ignition is switched off.
Minimum battery charger requirements during software updates
Battery Tester VAS 6161 introduction.
Explanation of error message received from scan tool when erasing diagnostic trouble codes (DTCs) in Control Module...
Read full bulletin
-623- after repair.
Voltage Drop Testing.
Read full bulletin
Updated for picture clarity.
Voltage Drop Testing.
REMOVED all 12 hour wait period before starting references.
Read full bulletin
ADDED EFB to "Select correct battery type" in bottom box. Also Jetta Wagon 2005 and 2018-2020 Tiguan LWB.
Vehicle Fuse location assistance.
Battery Testing and Charging instruction.
Read full bulletin
Updated to include model year 2019 applicability.
Tech Tips (Powertrain Control Module (PCM) Adaptation): To help prevent any malfunctions regarding adaptation of the...
Read full bulletin
PCM, make sure the StarMOBILE diagnostic tool is updated to the latest level. This document instructs how to perform the adaption. If StarMOBILE diagnostic tool requires software update, file can be downloaded from a link in document VSS-12-02, available on ServiceNet under Workshop Equipment> StarMOBILE Diagnostic Tool> Service Information.
Tech Tips (Battery Testing Info): This document informs Prior to testing the battery on any 2009 - 2014 Routan, first...
Read full bulletin
reference TB 2018694 (V271302) Battery, Use CCA when testing with the Midtronics MCR-340, Midtronics In-Charge 940 (INC 940), or VAS-6161.
Technical Bulletin (Battery, Use CCA when testing with the Midtronics MCR-340, Midtronics In-Charge 940 (INC 940), or...
Read full bulletin
VAS-6161): When testing the original factory battery in the Routan, for warranty purposes it is required to use the CCA rating of the factory battery label. The production solution to this issue is that no production change was required.
Tech Tips (Powertrain Control Module (PCM) Adaptation): To help prevent any malfunctions regarding adaptation of the...
Read full bulletin
PCM, make sure the StarMOBILE diagnostic tool is updated to the latest level. This document instructs how to perform the adaption. If StarMOBILE diagnostic tool requires software update, file can be downloaded from a link in document VSS-12-02, available on ServiceNet under Workshop Equipment> StarMOBILE Diagnostic Tool> Service Information.
Tech Tips (Battery Testing Info): This document informs Prior to testing the battery on any 2009 - 2014 Routan, first...
Read full bulletin
reference TB 2018694 (V271302) Battery, Use CCA when testing with the Midtronics MCR-340, Midtronics In-Charge 940 (INC 940), or VAS-6161.
Technical Bulletin (Battery, Use CCA when testing with the Midtronics MCR-340, Midtronics In-Charge 940 (INC 940), or...
Read full bulletin
VAS-6161): When testing the original factory battery in the Routan, for warranty purposes it is required to use the CCA rating of the factory battery label. The production solution to this issue is that no production change was required.
Witech usage for incorrect VIN logged into various modules
Flash: Dead Battery This Bulletin involves updating the Fold and Stow Module (FSM) with new software because the FSM...
Read full bulletin
stays awake resulting in a continuous electrical draw. The customer may experience a dead battery.
This document contains the VW Elsa Newsletter that contains a general overview of wiring diagrams updates, technical...
Read full bulletin
bulletins, pending service solutions, tech tips, campaigns, updates, and suggestions.
This document contains the VW Elsa Newsletter that contains a general overview of wiring diagrams updates, ElsaPro...
Read full bulletin
infomedia icons grayed out, workshop equipment tool storage application, technical bulletins, pending service solutions, tech tips, campaigns, updates, and suggestions.
Specific diagnostic check to address DTC U0151, after TIPM component replacement.
Read full bulletin
Part identification, location and ensured installation after rplacing Integrated Power Module.
Tech Tips (Routan SEL Vehicles - Start/Stop Button Installation at PDI): This document informs the New Routan SEL...
Read full bulletin
vehicles should be equipped with a start/stop button which is to be inserted into the WIN module during PDI. The button is shipped in the driver door trim pocket or the by-pack found on the third row seat.
Tech Tips (Start/Stop Button Installation at PDI): New Routan SEL vehicles should be equipped with a start/stop button...
Read full bulletin
which is to be inserted into the WIN module during PDI. The button is shipped in the by-pack (found on the third row seat) is shown in this document.
Tech Tips (Comfort Module (J393) or BCM (J519) Replacement): This document informs If a comfort or body control module...
Read full bulletin
is replaced during normal diagnosis, make sure the factory mode has been switched OFF. This can be accomplished by selecting the test plan through GFF or through Vehicle Self Diagnosis in adaptation channel 99. Failure to deactivate factory mode will create a concern where the door locks will not lock and/or unlock with the switch and/or the remotes.
Technical Bulletin (HVAC System Intermittently Blows Cold Regardless of Setting): Customers may experience the...
Read full bulletin
following condition: * HVAC system intermittently blows cold regardless of blend door/temperature setting. The product solution for this issue was that Improved Manual Temperature Control Module (MTC) software had been introduced in production
Tech Tips (Routan Turn Signals Will Not Activate after TIPM Replacement): The replacement Totally Integrated Power...
Read full bulletin
Module (TIPM) contains revised software that changes the TIPM operation and alters the front exterior lighting of the vehicle. The vehicle wiring may need to be modified to maintain turn signal operation. This document informs how to modify the vehicle wiring.
Tech Tips (Comfort Module (J393) or BCM (J519) Replacement): This document informs if a comfort or body control module...
Read full bulletin
is replaced during normal diagnosis, make sure the factory mode has been switched OFF. This can be accomplished by selecting guided function of either the J393 or J519 or control module OBD of J393 or J519 then selecting adaptation channel 99. Failure to deactivate factory mode will create a concern where the door locks will not lock and/or unlock with the switch and/or the remotes.
Technical Bulletin (Customer May Experience a Discharged Battery): This document involves updating the Folding Seat...
Read full bulletin
Module (FSM) with new software because the FSM stays awake resulting in a continuous electrical draw. The production solution to this issue is Improved Folding Seat Module (FSM) software has been introduced in production. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
PART IDENTIFICATION, LOCATION AND ENSURED INSTALLATION AFTER RPLACING INTEGRATED POWER MODULE.
Software & Calibration
39 bulletinsODIS Service Update
In SAGA, the time units for the Volkswagen DoubleCheck labor operation were reduced in error from 50 time units to 30...
Read full bulletin
time units during the system update posted on July 4th.
Quick reference update guide.
ACC Calibration Process
update to required vehicle wash shampoo.
Software updates.
This bulletin contains general instructions for software updates.
Update to model year applicability.
Updated to include additional models and model year applicability.
Update to include 2020-2021 model and model year applicability.
Update model applicability to MY 2020.
Update to mode; and model year applicability.
Update to mode; and model year applicability.
Quick Reference Update Guide.
Updated to include model year 2014 thru 2018 applicability.
Instrument cluster production mode solution, updated to include additional model and model year applicability.
Updated to include model year 2014 thru 2018 applicability.
Quick Reference of vehicle concerns.
Read full bulletin
Includes a list of Software versions and the technical bulletin numbers that referred to the concerns Updated
Quick Reference Update Guide of the vehicles expected upgraded software level.
Read full bulletin
The latest corresponding technical bulletins that address the issues, and concerns that have been had with the vehicles.
This communication is to update our ProFi dealers of the current status of the latest inbound and outbound ProFi...
Read full bulletin
requests.
Data Link connector pin assignment chart that is applicable to all models.
Read full bulletin
Update model year applicability.
Quick Reference of vehicle concerns.
Read full bulletin
Includes a list of Software versions and the technical bulletin numbers that referred to the concerns Updated
Update to include model year 2017 applicability.
Updated to include additional model year applicability.
Update to include additional model year applicability.
Update model year applicability.
Updated to include an additional model year applicability.
Updated to include model year 2017 applicability
Update model year applicability.
Updated to include additional model year applicability.
Update to model year applicability.
Update model year applicability to include 2017.
Update model and model year applicability.
QUICK INSTALL (J-49225 Routan TPM-RKE Analyzer Software Installation): This document informs the installation of the...
Read full bulletin
TPM-RKE Analyzer software on Laptops and PC's and how to update the software from a previous version.
This document is an overview which covers: - Reminder: Improvements to Technical Information Titles in ElsaPro -...
Read full bulletin
Technical Bulletins - Pending Service Solutions - Tech Tips - Campaigns - Updates - Suggestions
This document is an overview which covers: - Populating ElsaPro Service Personnel List - Technical Bulletins -...
Read full bulletin
Pending Service Solutions - Tech Tips - Campaigns - Updates - Suggestions
Quick Reference Update Guide: This document informs of the corresponding software/hardware and disc availability to the...
Read full bulletin
customer concerns about a vehicle
Update TB to include model year 2016 & 2017 applicability
TO UPDATE CLAIM PROCESSING STATEMENT.
Infotainment
25 bulletinsSatellite Radio Overview
Bluetooth Compatibility
Vehicles Equipped with Bluetooth Hands-Free Phone ? Pairing of Android Phones
All Navigation Radios-All Models
All Vehicles with Bluetooth Phone Kit Installed ? Streaming Audio from Phone to Radio
Updated Navigation System Software to Enhance Radio Stability
Satellite Radio Overview
When performing SVM updates, the scan tool should be hardwired to the vehicle and the Bluetooth physically turned off.
Read full bulletin
A hard wired internet connection is also recommended.
The RHR radio can control an iPod when the device is connected directly to USB port located on the front of radio.
Read full bulletin
Accessory iPod adapter kits available for other Routan radios will not operate with the RHR radio.
To check Bluetooth compatibility for all 2011 and newer vehicles, as well as 2010 Routan, use the link below.
For concerns of navigation inaccuracy, with or without antenna fault codes, begin by checking the number of received...
Read full bulletin
satellites in the area of the concern. This can be accomplished by following the instruction in Technical Bulletin 2023490 Antenna Diagnosis Overview.
When pairing an Android phone to the Bluetooth system, a few extra steps may be necessary.
Read full bulletin
Follow the instructions below to pair the phone:
When the Navigation RNS 850/510/315 is in 3D mode, the top portion of the screen may not display streets.
Read full bulletin
This line represents the horizon and is a normal operation of system. No repairs should be made. Examples below of day and night modes
Radio knob replacement instead of radio replacement w/ knob part number.
Bluetooth Compatibility.
Navigation for addressing incorrect Part direction.
Elsa2Go campaign information is now 100% aligned with ElsaPro.
Read full bulletin
This update to Elsa2Go ensures that both systems are displaying the same campaign information, including OPEN/CLOSED status, repair date as well as criterions at the same time without any discrepancy.
Alternative method for radio code retrieval.
Technical Bulletin (Bluetooth System Identification): This document informs of the method to understand how to identify...
Read full bulletin
the various Bluetooth systems by: ? Visual Identification ? PR Code ? Part Number
Technical Bulletin (Bluetooth System Identification): This document informs of the method to understand how to identify...
Read full bulletin
the various Bluetooth systems by: ? Visual Identification ? PR Code ? Part Number
Tech Tips (Bluetooth Compatibility): This document informs of the web address that can be used to check Bluetooth...
Read full bulletin
compatibility for all 2011, and newer vehicles, as well as 2010 Routan
Tech Tips (Instrument Cluster Production Mode): During PDI, or after installation of a replacement cluster, ?Pro? may...
Read full bulletin
be displayed in place of the odometer. The high beam indicator may be flashing in the instrument cluster as well. This indicates the cluster is in Production mode. Production mode is not the same as ?Transport? mode. This document infroms of the difference between Production, and Transport mode.
Technical Bulletin (Bluetooth System Identification): This document informs how to identify the various Bluetooth...
Read full bulletin
systems by: ? Visual Identification ? PR Code ? Part Number
Tech Tips (All Navigation Radios-All Models): When the Navigation RNS 850/510/315 is in 3D mode, the top portion of the...
Read full bulletin
screen may not display streets. This line represents the horizon and is a normal operation of system. This document provides Examples of day and night modes:
Update to existing Tech Tip 91-11-01 for later model years, to direct technicians to the bluetooth compatibility chart.
Pre-Delivery & Maintenance
23 bulletinsVehicle Concerns Before Recall Repair Available
Section 3.30.2 Volkswagen Carefree Maintenance Policy Modifications
Quick Spec Guides Now published on ServiceNet
Perfect Delivery Inspection (PDI) - Technician and Detailer Inspections
Perfect Delivery Inspection (PDI) - Technician and Detailer Inspections
Perfect Delivery Inspection (PDI) - Technician and Detailer Inspections
PDI - Vehicle Inspection, Protection Removal and Detailing
Wiper Blade Inspection for Proper Warranty Coding
Wiper Blade Inspection for Proper Warranty Coding
Temporary warranty process and parts return program
We are excited to introduce a new service tool to help us communicate open issues to our dealers and customers.
Volkswagen Warranty Policies and Procedures ? April 2014
If a needed service part is on back order, upgrade the daily order to a red order and check the ?Car Down? box to escalate the order.
Read full bulletin
If parts assistance is needed, please call 800-767-6552 to speak with a VWGoA Parts Specialist.
If a needed service part is on back order, upgrade the daily order to a red order and check the ?Car Down? box to escalate the order.
Read full bulletin
If parts assistance is needed, please call 800-767-6552 to speak with a VWGoA Parts Specialist.
Volkswagen is pleased to announce a new edition of the Volkswagen Warranty Policies and Procedures Manual.
Read full bulletin
This edition of the manual applies exclusively to the United States market. For warranty repairs required for Canadian owner's traveling to the Unit warranty terms prior to servicing the vehicle.
As announced by the attached Volkswagen Dealership Communication dated September 25, 2013, Volkswagen Carefree...
Read full bulletin
Maintenance is not applicable for Model Years 2013 and 2014 Routan vehicles.
Recall Reminder Part Labels
Tech Tips (All Models 2000-2014 - Part ordering): If a needed service part is on back order, upgrade the daily order...
Read full bulletin
to a red order and check the ?Car Down? box to escalate the order. This document informs how to contact VWGoA Parts Specialist for help.
Routan Perfect Delivery Inspection (PDI) - Technician and Detailer Inspections: A checklist to insure a customer...
Read full bulletin
receives a wonderful delivery of a vehicle that looks, feels, and meets the expectations of a new vehicle that he/she has purchased
Tech Tips (All Models 2000-2014 - Part ordering): If a needed service part is on back order, upgrade the daily order...
Read full bulletin
to a red order and check the ?Car Down? box to escalate the order. This document informs how to contact VWGoA Parts Specialist for help.
Routan Perfect Delivery Inspection (PDI) - Technician and Detailer Inspections: A checklist to insure a customer...
Read full bulletin
receives a wonderful delivery of a vehicle that looks, feels, and meets the expectations of a new vehicle that he/she has purchased
Routan Perfect Delivery Inspection (PDI) - Technician and Detailer Inspections: A checklist to insure a customer...
Read full bulletin
receives a wonderful delivery of a vehicle that looks, feels, and meets the expectations of a new vehicle that he/she has purchased
ROUTAN Perfect Delivery Inspection (PDI) - Technician and Detailer Inspections: A checklist to insure a customer...
Read full bulletin
receives a wonderful delivery of a vehicle that looks, feels, and meets the expectations of a new vehicle that he/she has purchased
Transmission
16 bulletinsChoosing Service Numbers ? Transmission and Drivetrain
When diagnosing a transmission concern on a Routan, a quick learn may be suggested as a first step on vehicles with no fault codes.
Read full bulletin
It will also be requested to observe the before and after quick learn values of the CVI.
Automatic Transmission Fluid Requirements
This bulletin provides a procedure to determine ?repair? versus ?replacement? of an automatic transmission.
Read full bulletin
This procedure is to be used ?After? the transmission has been removed from the vehicle.
Automatic Transmission Fluid Requirements
Automatic transmission fluid requirements.
Manual transmission noise diagnosing.
Choosing service numbers-Transmission and Drivetrain.
PLATE, TORQUE CONVERTER DRIVE For 3.6L with 62TE NOTE: FOR ALL PROMASTER (VF) 3.6L/62TE EQUIPPED VEHICLES: IF THE...
Read full bulletin
TRANSMISSION BRACKET TO THE TRANSMISSION CASE FASTENERS ARE REMOVED DURING SERVICING, THE FASTENERS (Part Number 06511385A$) ARE ONE TIME USEAGE & MUST BE REPLACED & PROPERLY TORQUED TO 105NM Replace the eight bolts (8) 06503465 drive plate to crank shaft and the four TC bolts 06504383 as they have sealants Vehicle miles < 30K: Mandatory replacement of transmission and driveplate Vehicle miles > 30K: Replace driveplate only (shot peened)
Auto Trans fluid requirements.
Transmission Fluid requirements updated to include additional model year applicability.
On-car analysis list of Customer Complaints: Transmission Concerns (including clutch assembly, bevel box and Haldex)
Technical Bulletin (Automatic Transmission Fluid Requirements): At this time, Volkswagen Group of America, Volkswagen...
Read full bulletin
Canada do not support or warranty any use of aftermarket universal automatic transmission fluids or the machines used to flush the transmissions. This applies to all standard automatic and DSG transmissions.
Technical Bulletin (Automatic Transmission, Determining Repair versus Replacement): This bulletin provides a...
Read full bulletin
procedure to determine "repair" versus "replacement" of an automatic transmission. This procedure is to be used "After" the transmission has been removed from the vehicle.
Tech Tips (Transmission Diagnosis): When diagnosing a transmission concern on a Routan, information can be learned may...
Read full bulletin
be suggested as a first step on vehicles with no fault codes. It will also be requested to observe the before and after quick learn values of the CVI. What is being observed in regards to the before and after values on the CVI, is to see a change. The before values are going to be an adaptation value based off of the driver?s habits.
This document was created In response to multiple dealership inquires about aftermarket universal (one fluid fits all)...
Read full bulletin
automatic transmission fluids and transmission flushing, Volkswagen Group of America, Volkswagen Canada have prepared the following statement. At this time, Volkswagen Group of America, Volkswagen Canada do not support or warranty any use of aftermarket universal automatic transmission fluids or the machines used to flush the transmissions. This applies to all standard automatic and DSG transmissions. Due to the functional and design variations in each automatic transmission, the transmission fluid is developed and used by Volkswagen for specific purpose within each application. Under no circumstances are these fluids to be used outside their designated transmission and replacing any of the Volkswagen approved automatic transmission fluids with a universal ?one fluid fits all? approach is not accepted.
Body & Paint
14 bulletinsWind & Water Leak Checking
Cluster Warning Lights Coming On, Windshield Wipers Will Not Turn Off, and/or Headlights Will Not Shut Off
Removing Paint Contaminants from Exterior Paint
Removing Paint Contaminants from Exterior Paint
Noise from Door Panel while Driving
Rattle Noise from the Right Rear Sliding Door While Driving Over Bumps
Customer concerns of all cluster warning lights coming on, windshield wipers not turning off, headlights not shutting...
Read full bulletin
off may be caused by an interior high speed (IHS) CAN bus concern. Check the following before continuing with normal diagnosis. See TT 97-12-04 for more information about diagnosing CAN bus concerns.
Republication of archived technical tip for water leak testing fixture.
Tech Tips (Turn Signals Flash While Power Sliding Doors Are Opening): Power Sliding Side Door Open Flash is a feature...
Read full bulletin
that can be enabled or disabled by the customer. When enabled, the left and right exterior hazard lights will flash for 12 seconds when either sliding door is opened. This will alert other drivers in the area that passenger(s) could be entering or exiting the vehicle. The Sliding Side Door Open Flash can be enabled or disabled by performing the procedure in this document:
Tech Tips (Turn Signals Flash While Power Sliding Doors Are Opening): Power Sliding Side Door Open Flash is a feature...
Read full bulletin
that can be enabled or disabled by the customer. When enabled, the left and right exterior hazard lights will flash for 12 seconds when either sliding door is opened. This will alert other drivers in the area that passenger(s) could be entering or exiting the vehicle. The Sliding Side Door Open Flash can be enabled or disabled by performing the procedure in this document:
explaination of cross car distorion when looking through the windshield and how the "effect" in normal.
Technical Bulletin (Squeaks, Rattles, Noise, Repair Materials): This doucment contains a list of components and...
Read full bulletin
applications developed to repair concerns of squeaks, rattles, noise and trim fit conditions.
Technical Bulletin (Removing Paint Contaminants from Exterior Paint): This document informs how to remove paint...
Read full bulletin
contaminants such as rail dust and industrial fallout from exterior paint.
Technical Bulletin (Rattle Noise from the Right Rear Sliding Door While Driving Over Bumps): Rattle noise that sounds...
Read full bulletin
like metal against metal coming from the right rear sliding door area while driving over bumps. This bulletin involves modifying the rubber bumper located at the rear end of the right rear sliding door upper track. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
HVAC & Climate
14 bulletinsReporting procedure for A/C compressor replacement regardless of the reason for failure.
Read full bulletin
Update to model year applicability and new warranty GFF labor operation number
HVAC System Intermittently Blows Cold Regardless of Setting
HVAC, Unpleasant Odor
HVAC, Unpleasant Odor
HVAC, Unpleasant Odor
When replacing the Air Conditioning compressor it is necessary to flush the entire system to remove all the PAG oil.
Read full bulletin
Replacement AC compressors come with a full charge of oil. Any time another compressor is installed with a different vendor (Sanden to Denso) it is necessary to replace all the oil in the system to the new vendor type PAG oil.
A/C requirements, update to model year applicability.
Refrigerant leak diagnosis using Nitrogen.
Read full bulletin
Updated to include ID.4
Refrigerant leak diagnosis using Nitrogen.
Read full bulletin
Updated to include additional model and model year applicability.
A/C Compressor replacement requirements, updated to include additional model year applicability.
A/C requirements, update to title.
Using Nitrogen to assist in finding A/C refrigerant leaks.
Using Nitrogen to assist in finding A/C refrigerant leaks.
Statement referring to TB 2043893 removed.
Read full bulletin
To include additional models and model year applicability. A.C. Compressor Replacement, GFF Required Regardless of Concern and Flush Requirement
Brakes
12 bulletinsBrake Disc Pulsation or Vibration (U.S.
Read full bulletin
Only)
Vibration or noise when braking may be due to brake disc corrosion protection which has not been completely removed by...
Read full bulletin
normal braking or surface rust built up during transportation.
Brake Disc Pulsation or Vibration (U.S.
Read full bulletin
Only)
Brake Disc Pulsation or Vibration
Vibration or noise when braking may be due to brake disc corrosion protection which has not been completely removed by...
Read full bulletin
normal braking, or surface rust built up during transportation.
Brake Disc, Pulsation, All Vehicles except Routan (U.S.
Read full bulletin
Only)
Brake Disc, Pulsation, All Vehicles except Routan (U.S.
Read full bulletin
Only)
Vibration or noise when braking may be due to brake disc corrosion protection which has not been completely removed by...
Read full bulletin
normal braking, or surface rust built up during transportation.
Vibration or noise when braking may be due to brake disc corrosion protection which has not been completely removed by...
Read full bulletin
normal braking, or surface rust built up during transportation.
Strut or Shock Absorber Leak Assesment.
Antilock brake function test direction.
Antilock brake function test direction.
Fuel System
9 bulletinsHigh Pressure Fuel Pump Diagnosis
2009-2015 Model Year Volkswagen TDI Clean Diesel Vehicles Registered in Minnesota
The DLC is intended for use with diagnostic scan tools and by emissions testing stations.
Read full bulletin
However, aftermarket devices (i.e., drive data recorders) that connect to the DLC have now become available.
Diesel fuel system diagnosis repair.
Gasoline quality.
Update to existing tip for fuel quality checking.
Technical Bulletin (TDI Vehicles Equipped with Mis-fuel Inhibitor): Starting in MY 2013 all VW TDI vehicles come...
Read full bulletin
equipped with a mis-fuel inhibitor installed in the fuel tank filler neck to prevent accidental mis-fueling of the fuel tank with the incorrect fuel. This document is being published to help answer any questions regarding this component.
Update to expand fuel testing for lean DTCS.
Update to existing tip for fuel quality checking.
Steering
9 bulletinsThis Tech Tip was established to explain the influence the adjustable steering column tilt position has on the steering...
Read full bulletin
wheel being off center and to provide information on checking for steering wheel off center.
This Tech Tip was established to explain the influence the adjustable steering column tilt position has on the steering...
Read full bulletin
wheel being off center and to provide information on checking for steering wheel off center. Please reference VWIQ video: http://tech.vw-iq.com/video.php?id=324
This Tech Tip was established to explain the influence the adjustable steering column tilt position has on the steering...
Read full bulletin
wheel being off center and to provide information on checking for steering wheel off center.
Steering Wheel Off Center.
steering wheel being off center and to provide information on checking for steering wheel off center.
Tech Tips (Steering Wheel Off Center): This Tech Tip was established to explain the influence the adjustable steering...
Read full bulletin
column tilt position has on the steering wheel being off center and to provide information on checking for steering wheel off center.
Tech Tips (Steering Wheel Off Center): This Tech Tip was established to explain the influence the adjustable steering...
Read full bulletin
column tilt position has on the steering wheel being off center and to provide information on checking for steering wheel off center.
Tech Tips (Steering Wheel Off Center): This Tech Tip was established to explain the influence the adjustable steering...
Read full bulletin
column tilt position has on the steering wheel being off center and to provide information on checking for steering wheel off center.
Tech Tips (Steering Wheel Off Center): This Tech Tip was established to explain the influence the adjustable steering...
Read full bulletin
column tilt position has on the steering wheel being off center and to provide information on checking for steering wheel off center.
Lighting
5 bulletinsTurn Signals Will Not Activate after TIPM Replacement
Exterior Lights, Moisture Accumulation
Exterior Lights, Moisture Accumulation
Exterior Lights, Moisture Accumulation
Tech Tips: Issue with Turn Signals Will Not Activate after TIPM Replacement
Tires & Wheels
5 bulletinsThe use of tire dressing gives your tires that shiny finish that completes the image of a clean (new) vehicle.
Read full bulletin
There are many different tire dressing products available. When choosing a product please pay close attention to its contents. Always use a water based product.
Four Wheel Alignments.
Tire Chain Information (for California dealers only) All Model Years.
Read full bulletin
Information only for all other dealers.
Tech Tips (Four Wheel Alignments): This Tech Tip provides an overview of vehicle four wheel alignment, and important...
Read full bulletin
steps that should be followed when performing four wheel alignments.
Tech Tips (Four Wheel Alignments): This Tech Tip provides an overview of vehicle four wheel alignment, and important...
Read full bulletin
steps that should be followed when performing four wheel alignments.
Suspension
4 bulletinsPulling up on any of the third row seating legs is not recommended (Figure 1) as this may cause the leg(s) to not fold...
Read full bulletin
flat when the seat is in the stowed position (figure 2). If the third row seating leg(s) do not fold flat into the seat, the tension spring on the affected leg(s) will need to be replaced.
Strut or Shock leak assessment.
Tech Tips (Third Row Seating): This document informs Pulling up on any of the third row seating legs is not recommended...
Read full bulletin
as this may cause the leg(s) to not fold flat when the seat is in the stowed position. If the third row seating leg(s) do not fold flat into the seat, the tension spring on the affected leg(s) will need to be replaced. Repair kit part numbers, for reference only, are in this document:
Tech Tips (Third Row Seating): This document informs Pulling up on any of the third row seating legs is not recommended...
Read full bulletin
as this may cause the leg(s) to not fold flat when the seat is in the stowed position. If the third row seating leg(s) do not fold flat into the seat, the tension spring on the affected leg(s) will need to be replaced. Repair kit part numbers, for reference only, are in this document:
Air Bags & Safety
3 bulletinsAirbag / Pyrotechnic Safety Belt Deployment Inquiries, update to contact information due to retirement.
VW contact when reporting a Airbag or Pyrotechnic safety belt deployment.
Read full bulletin
Update to model year applicability.
Airbag Issues.
Hybrid & EV
2 bulletinsVWGoA is pleased to inform you of the automatic delivery of the Required Special Tools which are used on VW Hybrid...
Read full bulletin
vehicles.
Campaign Reminder Communication.
Read full bulletin
Also includes: 1998-2004 Beetle, 2003-2004 Beetle Convertible, 2019 Beetle Convertible, 1994-2004 Eurovan, 1994-2004 Golf, 1994-2004 Jetta, 2001-2004 Jetta Wagon, 2018-2019 Tiguan LWB, 1994-2004 Passat, 1994-2004 Passat Wagon, 2004 Phaeton, 2013-2016 Jetta Hybrid, 2004 R32 and 1995-2006 Cabrio.