2026 Toyota RAV4 Hybrid TSBs
32 Technical Service Bulletins across 7 categories
Electrical
11 bulletins2026 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position.
Read full bulletin
In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seatfloor mats to the vehicle carpet using the floor mat retainers.
A battery in a stored vehicle is subject to conditions that can reduce its performance and service life.
Read full bulletin
These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life.
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers.
Read full bulletin
Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. The PDS process helps identify potential vehicle concerns before customer delivery. After completing the PDS process, maintain accurate PDS records by ensuring the required documents listed below are completed and recorded in accordance with Toyota Warranty Policy. GTS+ Health Check Completed PDS Check Sheet Battery Charge Test Print Out GTS+ Tire Pressure Information Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. This bulletin contains the PDS procedures that apply specifically to 2026 model year RAV4 Hybrid vehicles
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers.
Read full bulletin
Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. The PDS process helps identify potential vehicle concerns before customer delivery. After completing the PDS process, maintain accurate PDS records by ensuring the required documents listed below are completed and recorded in accordance with Toyota Warranty Policy. GTS+ Health Check Completed PDS Check Sheet Battery Charge Test Print Out GTS+ Tire Pressure Information Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. This bulletin contains the PDS procedures that apply specifically to 2026 model year RAV4 Hybrid vehicles
A battery in a stored vehicle is subject to conditions that can reduce its performance and service life.
Read full bulletin
These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life.
2026 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position.
Read full bulletin
In addition, some models may also utilize retainers for passenger side and rear seat floor mats.
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers.
Read full bulletin
Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. The PDS process helps identify potential vehicle concerns before customer delivery. After completing the PDS process, maintain accurate PDS records by ensuring the required documents listed below are completed and recorded in accordance with Toyota Warranty Policy. GTS+ Health Check Completed PDS Check Sheet Battery Charge Test Print Out GTS+ Tire Pressure Information Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. This bulletin contains the PDS procedures that apply specifically to 2026 model year RAV4 Hybrid vehicles. Refer to T-SB-0023-25, the universal Check Sheet that contains PDS steps that apply to all 2026 model year Toyota vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet. In addition, if the vehicle is stored for over 30 days, refer to T-SB-0009-25, Long-Term Vehicle Storage Guidelines.
A battery in a stored vehicle is subject to conditions that can reduce its performance and service life.
Read full bulletin
These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life.
2026 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position.
Read full bulletin
In addition, some models may also utilize retainers for passenger side and rear seat floor mats.
2026 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position.
Read full bulletin
In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicles glove box for customer reference.
2026 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position.
Read full bulletin
In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers.
Fuel System
7 bulletinsLong-term or off-site storage requires special care to maintain vehicle condition.
Read full bulletin
The following guidelines should be performed to minimize vehicle component/part degradation due to extendedvehicle storage conditions. Long-term storage can affect a vehicles systems and components. Any problems that are found should be corrected immediately.
Some 2026 RAV4 HV vehicles may display a Distance to Empty (DTE) that is higher than expected at initial fill-up.
Read full bulletin
The DTE is computed using the amount of fuel remaining and a learned value that is based on the average fuel consumption.
Some 2026 RAV4 HV vehicles may display a Distance to Empty (DTE) that is higher than expected at initial fill-up.
Read full bulletin
The DTE is computed using the amount of fuel remaining and a learned value that is based on the average fuel consumption.
Long-term or off-site storage requires special care to maintain vehicle condition.
Read full bulletin
The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicles systems and components. Any problems that are found should be corrected immediately.
Long-term or off-site storage requires special care to maintain vehicle condition.
Read full bulletin
The guidelines included should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicles systems and components. Any problems that are found should be corrected immediately.
Long-term or off-site storage requires special care to maintain vehicle condition.
Read full bulletin
The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicles systems and components. Any problems that are found should be corrected immediately.
Long-term or off-site storage requires special care to maintain vehicle condition.
Read full bulletin
The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicles systems and components. Any problems that are found should be corrected immediately.
Other
5 bulletinsPlease do not disassemble or make any repairs.
Read full bulletin
Request: - Save Health Check, then Clear DTC - Test drive to see if the DTC is easy to duplicate or not - Create a TAS case and contact TAS for special instructions If it is a weekend or holiday, continue with diagnosis and repair. Please save all parts and/or details and contact TAS on the next available work day.
OBSOLETE NOTICE February 12, 2026: This bulletin is now obsolete.
Read full bulletin
Please see T-SB-0005-26.
OBSOLETE NOTICE February 6, 2026: This bulletin is now obsolete.
Read full bulletin
Please see L-SB-0009-25.
OBSOLETE NOTICE February 03, 2026: This bulletin is now obsolete.
Read full bulletin
Please see T-SB-0003-26.
OBSOLETE NOTICE January 30, 2026: This bulletin is now obsolete.
Read full bulletin
Please see T-SB-0002-26.
Tires & Wheels
5 bulletinsDuring the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting.
Read full bulletin
If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation.
During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting.
Read full bulletin
If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation.
During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting.
Read full bulletin
If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation.
During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting.
Read full bulletin
If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation.
During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting.
Read full bulletin
If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation.
Engine
2 bulletinsSome 26MY RAV4 HV/PHV vehicles with HU (head unit) versions 1136 or older may exhibit one or more of theintermittent...
Read full bulletin
conditions below: No sound from JBL audio at start up. CarPlay audio and CarPlay icon are inoperative. CarPlay does not automatically launch at vehicle restart. Bluetooth device does not automatically pair after remote engine start via app or via key fob. Steering wheel seek switches do not work as expected during Sirius XM radio after transferring favorite stations from 21MM account to 24MM vehicle.
Some systems such as remote engine start and remote door lock/unlock may be inoperative if they are not enabled/registered after ECU replacement.
Read full bulletin
Remote engine start and remote door lock/unlock can be enabled/registered with GTS+.
Infotainment
1 bulletinA head unit software update (version 8612G42397) is now available for 2026 model year RAV4 Hybrid, and RAV4 Plug-in Hybrid vehicles via OTA or USB.
Read full bulletin
Vehicle operators can perform this update directly by accepting the on-screen notification advising the software update is available, or by locating the software update from the Settings menu and initiating the available update This is a phased rollout, which means that as time progresses, more vehicles will receive the update notification and ability to update the head unit via OTA. This timing will vary by location and may not display for every vehicle in one location at the same day and time.
Body & Paint
1 bulletinSome 2005 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present.
Read full bulletin
Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.