2011 Toyota Prius TSBs

This bulletin should be used in conjunction with the applicable model and model year Repair Manual while performing a rescue charge. The GRX-5100 should be used wherever the Repair Manual references the Toyota Hybrid System (THS) charger.

The Customer Confidence Program provides coverage as it applies to the Intelligent Power Module (IPM). The specific condition covered by this Customer Confidence Program 23TE03 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A94, P0A1A, P324E, and/or P3004. If any of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode.

The Customer Confidence Program provides coverage as it applies to the intelligent power module (IPM). The specific condition covered by this Customer Confidence Program 23TE02 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A7A and/or P0A78. If either of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode. Toyota will also provide coverage if the IPM has failed due to a thermal event regardless of what DTC is detected, or if the IPM has failed and the failure cannot be demonstrated to be due to anything other than a thermal event.

The Customer Confidence Program provides coverage as it applies to the Intelligent Power Module (IPM). The specific condition covered by this Customer Confidence Program 23TE03 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A94, P0A1A, P324E, and/or P3004. If any of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode.

The Customer Confidence Program provides coverage as it applies to the intelligent power module (IPM). The specific condition covered by this Customer Confidence Program 23TE02 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A7A and/or P0A78. If either of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode. Toyota will also provide coverage if the IPM has failed due to a thermal event regardless of what DTC is detected, or if the IPM has failed and the failure cannot be demonstrated to be due to anything other than a thermal event.

This bulletin should be used in conjunction with the applicable model and model year Repair Manual while performing a rescue charge. The GRX-5100 should be used wherever the Repair Manual references the Toyota Hybrid System (THS) charger

If a level surface with a consistent plane is not available, use the Floor Slope Compensation Procedure in this service bulletin in conjunction with the appropriate model and model year Repair Manual instructions when adjusting the millimeter wave radar sensor.

The condition could reduce the efficiency of the HV battery cooling system. Perform the procedures outlined in this bulletin to address this condition.

Camry Hybrid Vehicle; 2013 ? 2020 model year Avalon Hybrid Vehicle; 2016 ? 2020 model year Mirai and RAV4 Hybrid Vehicle; and 2020 model year Corolla Hybrid Vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P0A80/P1AC000 and/or P0A7F/P1A8000 stored due to dust or debris buildup in the HV battery cooling fan and/or HV cooling filter. Follow the procedure in this bulletin to address this condition.

Camry Hybrid Vehicle; 2013 ? 2020 model year Avalon Hybrid Vehicle; 2016 ? 2020 model year Mirai and RAV4 Hybrid Vehicle; and 2020 model year Corolla Hybrid Vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P0A80/P1AC000 and/or P0A7F/P1A8000 stored due to dust or debris buildup in the HV battery cooling fan and/or HV cooling filter. Follow the procedure in this bulletin to address this condition.

The condition could reduce the efficiency of the HV battery cooling system. Perform the procedures outlined in this bulletin to address this condition.

This bulletin should be used in conjunction with the applicable model and model year Repair Manual while performing a rescue charge. The GRX-5100 should be used wherever the Repair Manual references the Toyota Hybrid System (THS) charger.

If a level surface is not available, this tech tip should be used in conjunction with the repair manual to set the angle of the front millimeter wave radar sensor and reflector height before performing beam axis adjustment.

This bulletin should be used in conjunction with the Repair Manual while performing Rescue Charge. The GRX-5100 should be used wherever the Repair Manual references the Toyota Hybrid System (THS) Charger.

This warning message may appear when the HV Battery cooling system loses efficiency due to debris on the filter and or some object obstructing the air inlet.

This warning message may appear when the HV Battery cooling system loses efficiency due to debris on the filter and or some object obstructing the air inlet.

T-SB-0101-11. Applicability has been updated to include 2016 ? 2017 model year vehicles. Service Bulletin No. T-SB-0101-11 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.

the inverter assembly of the hybrid system may fail. This condition is indicated by the hybrid system diagnostic trouble codes (DTCs): P0A94, P324E, P3004, and/or P0A1A. If one or more of these DTCs are detected, various warning lamps on the instrument panel will illuminate and the vehicle will enter fail safe mode.

the inverter assembly of the hybrid system may fail. This condition is indicated by the hybrid system diagnostic trouble codes (DTCs): P0A94, P324E, P3004, and/or P0A1A. If one or more of these DTCs are detected, various warning lamps on the instrument panel will illuminate and the vehicle will enter fail safe mode.

T-SB-0043-14. ? Applicability has been updated to include 2017 ? 2018 model year Toyota vehicles. Service Bulletin No. T-SB-0043-14 is obsolete and any printed versions should be discarded. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE New security provisions are required to obtain a reset passcode. It is critical to review the instructions for this new process BEFORE attempting to get a passcode in the new system.

located inside the inverter assembly of the hybrid system may fail. This condition is indicated by the hybrid system diagnostic trouble codes (DTCs): P0A94, P324E, P3004, and/or P0A1A. If one or more of these DTCs are detected, various warning lamps on the instrument panel will illuminate and the vehicle will enter fail safe mode.

inside the inverter assembly of the hybrid system may fail. This condition is indicated by hybrid system diagnostic trouble codes (DTCs): P0A94, P324E, P3004, and/or P0A1A. If one or more of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter fail safe mode. Although the Hybrid Inverter assembly is covered by Toyota?s New Vehicle Limited Warranty for 8 years or 100,000 miles (whichever occurs first), we at Toyota care about the customers? ownership experience. Toyota is now extending the warranty coverage for repairs related to failure of the Intelligent Power Module (IPM). Please see the Warranty Enhancement Program Details for additional information.

located inside the inverter assembly of the hybrid system may fail. This condition is indicated by the hybrid system diagnostic trouble codes (DTCs): P0A94, P324E, P3004, and/or P0A1A. If one or more of these DTCs are detected, various warning lamps on the instrument panel will illuminate and the vehicle will enter fail safe mode.

inside the inverter assembly of the hybrid system may fail. This condition is indicated by hybrid system diagnostic trouble codes (DTCs): P0A94, P324E, P3004, and/or P0A1A. If one or more of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter fail safe mode. Although the Hybrid Inverter assembly is covered by Toyota?s New Vehicle Limited Warranty for 8 years or 100,000 miles (whichever occurs first), we at Toyota care about the customers? ownership experience. Toyota is now extending the warranty coverage for repairs related to failure of the Intelligent Power Module (IPM). Please see the Warranty Enhancement Program Details for additional information.

orientation mark of the DRC.

excessive buildup of dust, lint, or other debris that can reduce the efficiency of the HV Battery Cooling System. HV Battery Cooling Fan maintenance and cleaning should be performed to address this condition.

Some cases have been identified with internal modification done to the HV Battery. Modified or altered parts are not covered under warranty.

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.

shorter than customer expectation. A modified wiring harness is available to address this condition.

Battery Replacement.

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the TIS and the CUW.

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.

Electrical and electronic components, including wiring harnesses, are particularly susceptible to corrosion and subsequent malfunction. Although any flooding can be damaging, salt water flooding elevates the potential for abnormal conditions and may increase risks due to its highly corrosive and conductive nature. Salt residue also continues to corrode and remain conductive even after a vehicle dries. This bulletin is intended to assist with safe handling and inspection of flood damaged vehicles and to provide basic guidance on likely needed repairs.

the inverter assembly of the hybrid system may fail.

the Intelligent Power Module (IPM). The vehicles covered under this Warranty Enhancement must first have Safety Recall E0E (launched in mid-February, 2014) performed (if applicable).

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.

Some cases have been identified with internal modification done to the HV Battery. Modified or altered parts are not covered under warranty.

battery replacement.

excessive buildup of dust, lint, or other debris that can reduce the efficiency of the HV Battery Cooling System. HV Battery Cooling Fan maintenance and cleaning should be performed to address this condition.

This warning message may appear when the HV Battery cooling system loses efficiency due to debris on the filter and or some object obstructing the air inlet. Refer to the information below to address this issue.

Some cases have been identified with internal modification done to the HV Battery. Modified or altered parts are not covered under warranty.

the inverter assembly of the hybrid system may fail. This condition is indicated by the hybrid system diagnostic trouble codes (DTCs): P0A94, P324E, P3004, and/or P0A1A. If one or more of these DTCs are detected, various warning lamps on the instrument panel will illuminate and the vehicle will enter fail safe mode.

model year vehicles used under certain severe operating conditions may exhibit an excessive buildup of dust, lint, or other debris in the HV battery cooling fan, which can reduce the efficiency of the HV battery cooling system. Follow the Repair Procedure in this bulletin to address this condition.

SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0012-13. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU's information.

Some 2010 ? 2011 model year Prius vehicles may exhibit a condition where a halogen low beam headlamp bulb lifetime is shorter than customer expectation. A modified wiring harness is available to address this condition.

Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE: There are new security provisions required to obtain a Reset Pass-Code. It is critical that the instructions for this new process are reviewed BEFORE attempting to get a Pass-Code in the new system.

damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.

damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.

Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE: There are new security provisions required to obtain a Reset Pass-Code. It is critical that the instructions for this new process are reviewed BEFORE attempting to get a Pass-Code in the new system.

Warranty Enhancement Program to extend the warranty coverage for repairs related to failure of the Intelligent Power Module (IPM). The vehicles covered under this Warranty Enhancement must first have Safety Recall E0E (launched in mid-February, 2014) performed (if applicable).

Enhancement Program to extend the warranty coverage for repairs related failure of the Intelligent Power Module (IPM). The vehicles covered under this Warranty Enhancement must first have Safety Recall E0E (launched in mid-February, 2014) performed (if applicable). In these vehicles, Toyota has received some reports where the Intelligent Power Module (IPM) located inside the inverter assembly of the hybrid system may fail. This condition is indicated by hybrid system diagnostic trouble codes (DTCs): P0A94, P324E, P3004, and/or P0A1A. If one or more of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter fail safe mode. Although the Hybrid Inverter assembly is covered by Toyota?s New Vehicle Limited Warranty for 8 years or 100,000 miles (whichever occurs first), we at Toyota care about the customers? ownership experience. Toyota is now extending the warranty coverage for repairs related to failure of the Intelligent Power Module (IPM).

Enhancement Program to extend the warranty coverage for repairs related to failure of the Intelligent Power Module (IPM). The vehicles covered under this Warranty Enhancement must first have Safety Recall E0E (launched in mid-February, 2014) performed (if applicable). In these vehicles, Toyota has received some reports where the Intelligent Power Module (IPM) located inside the inverter assembly of the hybrid system may fail. This condition is indicated by hybrid system diagnostic trouble codes (DTCs): P0A94, P324E, P3004, and/or P0A1A. If one or more of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter fail safe mode. Although the Hybrid Inverter assembly is covered by Toyota's New Vehicle Limited Warranty for 8 years or 100,000 miles (whichever occurs first), we at Toyota care about the customers' ownership experience. Toyota is now extending the warranty coverage for repairs related to failure of the Intelligent Power Module (IPM). Please see the Warranty Enhancement Program Details for additional information.

LOCATED INSIDE THE INVERTER ASSEMBLY OF THE HYBRID SYSTEM MAY FAIL. THIS CONDITION IS INDICATED BY THE HYBRID SYSTEM DIAGNOSTIC TROUBLE CODES (DTCS): P0A94, P324E, P3004, AND/OR P0A1A. IF ONE OR MORE OF THESE DTCS ARE DETECTED, VARIOUS WARNING LAMPS ON THE INSTRUMENT PANEL WILL ILLUMINATE AND THE VEHICLE WILL ENTER FAIL SAFE MODE.

INSIDE THE INVERTER ASSEMBLY OF THE HYBRID SYSTEM MAY FAIL. THIS CONDITION IS INDICATED BY HYBRID SYSTEM DIAGNOSTIC TROUBLE CODES (DTCS): P0A94, P324E, P3004, AND/OR P0A1A. IF ONE OR MORE OF THESE DTCS ARE DETECTED, VARIOUS WARNING LAMPS ON THE INSTRUMENT PANEL WILL ALSO ILLUMINATE AND THE VEHICLE WILL ENTER FAIL SAFE MODE. ALTHOUGH THE HYBRID INVERTER ASSEMBLY IS COVERED BY TOYOTAS NEW VEHICLE LIMITED WARRANTY FOR 8 YEARS OR 100,000 MILES (WHICHEVER OCCURS FIRST), WE AT TOYOTA CARE ABOUT THE CUSTOMERS OWNERSHIP EXPERIENCE. TOYOTA IS NOW EXTENDING THE WARRANTY COVERAGE FOR REPAIRS RELATED TO FAILURE OF THE INTELLIGENT POWER MODULE (IPM). PLEASE SEE THE WARRANTY ENHANCEMENT PROGRAM DETAILS FOR ADDITIONAL INFORMATION.

SOME CASES HAVE BEEN IDENTIFIED WITH INTERNAL MODIFICATION DONE TO THE HV BATTERY. MODIFIED OR ALTERED PARTS ARE NOT COVERED UNDER WARRANTY.

FLASH CALIBRATION UPDATES FOR SPECIFIC VEHICLE MODELS/ECUS ARE RELEASED AS FIELD-FIX PROCEDURES DESCRIBED IN INDIVIDUAL SERVICE BULLETINS. THIS BULLETIN DETAILS THE TECHSTREAM ECU FLASH REPROGRAMMING PROCESS AND OUTLINES USE OF THE TECHNICAL INFORMATION SYSTEM (TIS) AND THE CALIBRATION UPDATE WIZARD (CUW). FLASH CALIBRATION UPDATES CAN ONLY BE APPLIED TO THE VEHICLE/ECU COMBINATION FOR WHICH THEY ARE INTENDED. ECUS HAVE INTERNAL SECURITY THAT WILL NOT ALLOW THEM TO BE PROGRAMMED WITH ANOTHER ECUS INFORMATION."

THIS BULLETIN SHOULD BE USED IN CONJUNCTION WITH THE REPAIR MANUAL WHILE PERFORMING RESCUE CHARGE. THE GRX-5100 SHOULD BE USED WHEREVER THE REPAIR MANUAL REFERENCES THE TOYOTA HYBRID SYSTEM (THS) CHARGER.

ORIENTATION MARK OF THE DRC.

EXCESSIVE BUILDUP OF DUST, LINT, OR OTHER DEBRIS THAT CAN REDUCE THE EFFICIENCY OF THE HV BATTERY COOLING SYSTEM. HV BATTERY COOLING FAN MAINTENANCE AND CLEANING SHOULD BE PERFORMED TO ADDRESS THIS CONDITION.

EXCESSIVE BUILDUP OF DUST, LINT, OR OTHER DEBRIS THAT CAN REDUCE THE EFFICIENCY OF THE HV BATTERY COOLING SYSTEM. HV BATTERY COOLING FAN MAINTENANCE AND CLEANING SHOULD BE PERFORMED TO ADDRESS THIS CONDITION.

SEE DOCUMENT SEARCH BUTTON FOR OWNERS LETTER. *LJ

MODELS 2010-2011 PRIUS. *PE

*PE

THAT COULD BUILDUP ON HV BATTERY COOLING FAN THAT REDUCES EFFICIENCY OF THE SYSTEM. *PE MODEL 2010-2013 PRIUS. UPDATED 5/14/14. *PE

VEHICLES EQUIPPED WITH DRIVER'S SIDE FLOOR MAT RETAINING CLIPS TO SECURE THE FLOOR MAT IN CORRECT POSITION. *PE

Please see T-SB-0009-26.

Please see T-SB-0057-18.

Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.

Please see T-SB-0012-21.

Please see T-SB-0044-16.

Please see T-SB-0003-21.

Please see T-SB-0063-20.

Please see T-SB-0032-20. Replacement Certification Labels and VIN Plates

Please see T-SB-0010-20.

Please see T-SB-0038-19.

Please see T-SB-0027-15.

This Tech Tip will help you identify the system type prior to ordering replacement keys.

Please see T-SB-0012-13.

satisfaction.

correct pulling complaints.

The Smart Key/Smart Entry systems conform to all applicable FCC rules. This bulletin details the applicable specifications for these systems.

Please see T-SB-0134-16.

Once the system is reset, all previously registered keys will be erased.

Once the system is reset, all previously registered keys will be erased.

This condition has been remedied, and DCM activation utilizing Techstream can now be resumed.

This is a known condition and will be remedied in the near future. Please discontinue DCM activations utilizing Techstream until further notice.

Please see T-SB-0054-13.

10,000 miles for most vehicles that require this oil. With this change, the following should be noted

Please see T-SB-0185-13.

Please see T-SB-0041-15.

Please see T-SB-0041-15.

*PE

These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.

start due to a sticking Exhaust Gas Recirculation (EGR) Valve in some vehicles. If this occurs, the vehicle may illuminate the check engine light and set diagnostic trouble code (DTC) P0401.

T-SB-0012-13. Service Bulletin No. T-SB-0012-13 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Toyota term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ?ECU? is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Toyota specific control unit

the brake, ABS, and/or TRAC warning light(s) are on and/or a Check VSC message displays. Diagnostic Trouble Codes (DTCs) C1391, C1252, C1256, and C1253 may be stored. This condition may be caused by a small internal brake fluid leak inside the brake booster assembly with master cylinder. Follow the Repair Procedure in this bulletin to address this condition.

engine may exhibit a MIL ?ON? condition with Diagnostic Trouble Codes (DTCs) P2111 (Throttle Actuator Control System) and P0A0F (Engine Failed to Start) present when ambient temperatures are below 23 F (?5 C). The intake manifold assembly has been improved as well as the Engine Control Module/ECM (SAE Term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition occurring. Follow the repair procedure in this bulletin to address this condition.

engine may exhibit a MIL ?ON? condition with Diagnostic Trouble Codes (DTCs) P2111 (Throttle Actuator Control System) and P0A0F (Engine Failed to Start) present when ambient temperatures are below 23 F (?5 C). The intake manifold assembly has been improved as well as the Engine Control Module/ECM (SAE Term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition occurring. Follow the repair procedure in this bulletin to address this condition.

been disconnected or power to the Engine ECM has been interrupted.

The Check Engine Light may also illuminate with (DTC) P0401 (Exhaust Gas Recirculation Flow Insufficient Detected). Due to excess carbon build-up at the valve assembly, the valve will stick, causing the engine RPM to fluctuate. Follow the procedures in this bulletin to address the condition.

The Check Engine Light may also illuminate with (DTC) P0401 (Exhaust Gas Recirculation Flow Insufficient Detected). Due to excess carbon build up at the valve assembly, the valve will stick causing the engine RPM to fluctuate. Follow the procedures in this bulletin to address this condition.

power to the Engine ECM has been interrupted.

noise from the transaxle at cold start due to a sticking Exhaust Gas Recirculation (EGR) Valve. If this occurs, the vehicle may illuminate the check engine light and set diagnostic trouble code (DTC) P0401.

transaxle at cold start due to a sticking Exhaust Gas Recirculation (EGR) Valve. If this occurs, the vehicle may illuminate the check engine light and set diagnostic trouble code (DTC) P0401.

transaxle at cold start due to a sticking Exhaust Gas Recirculation (EGR) Valve. If this occurs, the vehicle may illuminate the check engine light and set diagnostic trouble code (DTC) P0401.

transaxle at cold start due to a sticking Exhaust Gas Recirculation (EGR) Valve. If this occurs, the vehicle may illuminate the check engine light and set diagnostic trouble code (DTC) P0401.

transaxle at cold start due to a sticking Exhaust Gas Recirculation (EGR) Valve. If this occurs, the vehicle may illuminate the check engine light and set diagnostic trouble code (DTC) P0401.

VSV/PCV line separation from the throttle body housing.

control actuator may develop a coolant leak. If a coolant leak occurs, the Water Temp indicator Lamp and Check engine Lamp will illuminate

If the multi-display screen is set to Day Mode when the headlights are on, the setting we be memorized when the engine is turned off.

There a re man benefits of this oil.

turned very little from side-to-side. If the operator attempts to ready-on or start the vehicle while there is tension on the steering lock actuator, it will not be able to fully disengage when the "ENGINE START STOP" or "POWER" switch is depressed. This condition will cause the "ENGINE START STOP" or "POWER" switch's LED to flash green and the vehicle will fail to ready-on or start.

engine may exhibit a MIL ?ON? condition with Diagnostic Trouble Codes (DTCs) P2111 (Throttle Actuator Control System) and P0A0F (Engine Failed to Start) present when ambient temperatures are below 23 F (?5 C). The intake manifold assembly has been improved to address this condition.

T-SB-0168-16 ?2ZR-FXE Engine Oil Consumption Inspection Procedure? MUST be performed BEFORE continuing with the procedure in this bulletin. Some 2010 ? 2014 model year Prius PHV, Prius V, and Prius vehicles equipped with the 2ZZ-FXE engine may exhibit engine oil consumption. The piston and piston ring assembly have been changed to reduce the potential for oil consumption. Follow the Repair Procedure in this bulletin to address this condition.

The piston and ring assembly has been redesigned to minimize oil consumption. Use the Inspection Procedure in this bulletin to confirm this condition prior to ANY repairs.

There are multiple benefits of this oil including: Reduced friction and wear on engine surfaces, Improved fuel economy, Reduction in waste oil stream (in vehicles approved for 10,000 mile oil change intervals), Reduced maintenance cost (in vehicles approved for 10,000 mile oil change intervals). Due to the improved performance and durability of 0w20 synthetic oil, Toyota has extended the oil change intervals to 10,000 mile for most vehicles that require this oil. With this change, the following should be noted: The 2TR-FE (4Runner/Tacoma) and the 3UR-FBE (Flex Fuel Tundra/Sequoia) are the exceptions to this new change interval program; these engines have not been approved for the 10,000 mile interval at this time. A 5,000 mile oil change interval is still required for these vehicles. Also, the Flex Fuel 3UR-FBE requires a 2,500 mile interval when operated on E85 50% of the time or more. Only Toyota vehicles in which 0w20 oil is mandatory (except for the 2TR-FE & 3UR-FBE Engines) have been approved for extended oil change intervals. Vehicles in which 0w-20 is an option to 5w20 (or 5w30) will continue to require 5,000 mile change intervals, even if 0w20 oil is used. In case of vehicles with 10,000 mile oil change intervals, the 5,000 mile service interval has not been eliminated. The traditional 5,000 mile maintenance procedures (such as tire rotation) will continue to be required, and the fluid levels (including engine oil) will need to be checked and adjusted at this time. If the vehicle operation meets the standard criteria for "Special Operating Conditions" such as: driving off-road, on dirt roads, towing a trailer, making repeated short trips under 32 degrees F, or extensive idling, the engine oil must be replaced at 5,000 mile intervals, regardless of oil used.

been disconnected or power to the Engine ECM has been interrupted.

Trouble Code P0401 (Exhaust Gas Recirculation Flow insufficient Detected) present. The Exhaust Gas Recirculation Valve has been improved to address this condition.

There are multiple benefits of this oil. Due to the improved performance and durability of 0w-20 synthetic oil, Toyota has extended the oil change intervals to 10,000 miles for most vehicle that require this oil.

at cold start due to a sticking Exhaust Gas Recirculation (EGR) Valve in some vehicles. If this occurs, the vehicle may illuminate the check engine light and set diagnostic trouble code (DTC) P0401.

2016 Prius V (2ZR-FXE equipped) vehicles may exhibit a "runs rough" and/or MIL "ON" condition with DTC(s) P0300, P0301, P0302, P0303, and P0304 (Misfire) during light acceleration while the Exhaust Gas Recirculation (EGR) system is active. Replace the Intake Manifold assembly to address this condition.

equipped) vehicles may exhibit a "runs rough" and/or MIL "ON" condition with DTC(s) P030# (Misfire) during light acceleration while the Exhaust Gas Recirculation (EGR) system is active. Replace the intake manifold assembly to address this condition.

Diagnostic Trouble Code(s) (DTCs) P0A0F (Engine Failed to Start), caused by Purge VSV/PCV line separation from the throttle body housing. One or more of the following DTCs may also set: * P3190 (Poor Engine Power) * P3191 (Engine Does NOT Start) * P0171 (System Too Lean [Bank One]) Replace the Purge VSV (Vacuum Switching Valve Assembly) and reprogram the Engine Control Module/ECM (SAE term: Powertrain Control Module/PCM) with the latest calibration to address this condition.

Diagnostic Trouble Code(s) (DTCs) P0A0F (Engine Failed to Start), caused by Purge VSV/PCV line separation from the throttle body housing. One or more of the following DTCs may also set: * P3190 (Poor Engine Power) * P3191 (Engine Does NOT Start) * P0171 (System Too Lean [Bank One]) Replace the Purge VSV (Vacuum Switching Valve Assembly) and reprogram the Engine Control Module/ECM (SAE term: Powertrain Control Module/PCM) with the latest calibration to address this condition.

This may or may not occur with DTC(s) P0300, P0301, P0302, P0303 and / or P0304.

NOISE FROM THE TRANSAXLE AT COLD START DUE TO A STICKING EXHAUST GAS RECIRCULATION (EGR) VALVE. IF THIS OCCURS, THE VEHICLE MAY ILLUMINATE THE CHECK ENGINE LIGHT AND SET DIAGNOSTIC TROUBLE CODE (DTC) P0401.

TRANSAXLE AT COLD START DUE TO A STICKING EXHAUST GAS RECIRCULATION (EGR) VALVE. IF THIS OCCURS, THE VEHICLE MAY ILLUMINATE THE CHECK ENGINE LIGHT AND SET DIAGNOSTIC TROUBLE CODE (DTC) P0401.

TRANSAXLE AT COLD START DUE TO A STICKING EXHAUST GAS RECIRCULATION (EGR) VALVE. IF THIS OCCURS, THE VEHICLE MAY ILLUMINATE THE CHECK ENGINE LIGHT AND SET DIAGNOSTIC TROUBLE CODE (DTC) P0401.

TRANSAXLE AT COLD START DUE TO A STICKING EXHAUST GAS RECIRCULATION (EGR) VALVE. IF THIS OCCURS, THE VEHICLE MAY ILLUMINATE THE CHECK ENGINE LIGHT AND SET DIAGNOSTIC TROUBLE CODE (DTC) P0401.

TRANSAXLE AT COLD START DUE TO A STICKING EXHAUST GAS RECIRCULATION (EGR) VALVE. IF THIS OCCURS, THE VEHICLE MAY ILLUMINATE THE CHECK ENGINE LIGHT AND SET DIAGNOSTIC TROUBLE CODE (DTC) P0401.

THE CHECK ENGINE LIGHT MAY ALSO ILLUMINATE WITH (DTC) P0401 (EXHAUST GAS RECIRCULATION FLOW INSUFFICIENT DETECTED). DUE TO EXCESS CARBON BUILD-UP AT THE VALVE ASSEMBLY, THE VALVE WILL STICK, CAUSING THE ENGINE RPM TO FLUCTUATE. FOLLOW THE PROCEDURES IN THIS BULLETIN TO ADDRESS THE CONDITION.

POWER TO THE ENGINE ECM HAS BEEN INTERRUPTED.

EQUIPPED) VEHICLES MAY EXHIBIT A RUNS ROUGH AND/OR MIL ON CONDITION WITH DTC(S) P030# (MISFIRE) DURING LIGHT ACCELERATION WHILE THE EXHAUST GAS RECIRCULATION (EGR) SYSTEM IS ACTIVE. REPLACE THE INTAKE MANIFOLD ASSEMBLY TO ADDRESS THIS CONDITION.

PRIUS V (2ZR-FXE EQUIPPED) VEHICLES MAY EXHIBIT A RUNS ROUGH AND/OR MIL ON CONDITION WITH DTC(S) P0300, P0301, P0302, P0303, AND P0304 (MISFIRE) DURING LIGHT ACCELERATION WHILE THE EXHAUST GAS RECIRCULATION (EGR) SYSTEM IS ACTIVE. REPLACE THE INTAKE MANIFOLD ASSEMBLY TO ADDRESS THIS CONDITION.

PURGE VSV/PCV LINE SEPARATION OF THROTTLE BODY HOUSING. MODEL 2010-13 PRIUS, PRIUS V. *PE

AND P3191), ENGINE CONTROL MODULE/ECM (SAE TERM: POWERTRAIN CONTROL MODULE/PCM) LOGIC WAS REVISED. *PE UPDATED 4/15/13. *PE

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.

If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.

wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.

If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.

If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

This material protects from acid rain, environmental fallout, and rail contamination.

wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.

If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.

These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.

Pearl (070) or Super White (040) Paint Color Coverage for Peeling of Factory-Applied Paint

These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.

These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.

The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition

The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process

The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.

The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition.

plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.

PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, T-SB-0144-08, and T-SB-0304-17. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.

T-SB-0040-08. * Applicability has been updated to include applicable 2016 model year vehicles. Service Bulletin No. T-SB-0040-08 is obsolete and any printed versions should be discarded. Some 2010 - 2019 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition.

PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. Replacement Certification Label and VIN Plate Criteria A replacement certification label and/or VIN plate may be requested if: ? The vehicle was in an accident and the label and/or plate is damaged or attached to a part that will be replaced during the repair. ? The label and/or plate was stolen.

These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture.

These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture.

keys and receiver replacement parts. This Tech Tip will help you identify the system type prior to ordering replacement keys and/or Door Control Receiver in rear of vehicle.

source of the noise may be the two stoppers bonded to the top of the windshield/rear glass, or the windshield retainers bonded to the lower edge of the windshield. This bulletin provides the recommended repair procedure to eliminate these types of noises from the windshield/rear glass area.

quenching process during manufacturing.

On some vehicles, when Rapgard? is removed the paint may have a stained appearance. These stains appear to be under the clear coat (repainting this area is NOT necessary). The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture.

PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. REVISION NOTICE January 11, 2018 ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.

metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.

THESE STAINS APPEAR TO BE UNDER THE CLEAR COAT (REPAINTING THIS AREA IS NOT NECESSARY). THE STAIN PATTERNS ARE USUALLY UNDER WRINKLES IN THE RAPGARD. THESE WRINKLES SOMETIMES TRAP WATER AND CAUSE THE PAINT TO STAIN FROM THE TRAPPED MOISTURE, ESPECIALLY ON HORIZONTAL SURFACES, SUCH AS THE HOOD, ROOF, AND TRUNK. STAINS CAN BE REMOVED BY HEATING THE STAINED SURFACE TO REMOVE THE TRAPPED MOISTURE.

rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.

These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.

These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement

These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.

These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.

These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement

evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part.

This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address the condition. NOTE This bulletin applies to ALL powertrain fluids excluding fuel and coolant.

T-SB-0033-14. ? Applicability has been updated to include 2019 model year Toyota vehicles. Service Bulletin No. T-SB-0033-14 is obsolete and any printed versions should be discarded. Some 2006 ? 2019 model year Toyota vehicles in particular geographic areas may exhibit a condition where the HVAC evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part. NOTE The ARINIX Tip is NOT registered or labeled for sale or use outside the United States or Puerto Rico.

Toyota has received a number of reports regarding the halogen head lamps on certain 2010 ? 2011 model year Prius vehicles. In these reports, customers have indicated that their vehicle?s halogen low beam headlamp bulb lifetime is shorter than expected. Although the Halogen Low Beam Headlamp Bulbs are covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever occurs first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage related to the halogen head lamp bulbs due to these circumstances. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.

An insect repellent drain hose tip (ARINIX Tip) is now available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part.

obtained through your dealership?s Parts Department utilizing standard replacement parts ordering procedures. Follow the guidelines outlined in this bulletin to ensure proper label application.

An insect repellent drain hose tip (ARINIX Tip) is now available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part.

Refer to the details below. January 25, 2018 The claim filing details have been updated to clarify remedy OP Codes and Interim Op Codes for vehicles that are currently exhibiting the condition vs. vehicles that have exhibited the condition in the past. Toyota has received a number of reports regarding the halogen head lamps on certain 2010 ? 2011 model year Prius vehicles. In these reports, customers have indicated that their vehicle?s halogen low beam headlamp bulb lifetime is shorter than expected. Although the Halogen Low Beam Headlamp Bulbs are covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever occurs first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage related to the halogen head lamp bulbs due to these circumstances. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement

In these reports, customers have indicated that their vehicle?s halogen low beam headlamp bulb lifetime is shorter than expected. Although the Halogen Low Beam Headlamp Bulbs are covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever occurs first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage related to the halogen head lamp bulbs due to these circumstances. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.

In these reports, customers have indicated that their vehicle?s halogen low beam headlamp bulb lifetime is shorter than expected. Although the Halogen Low Beam Headlamp Bulbs are covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever occurs first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage related to the halogen head lamp bulbs due to these circumstances. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.

Toyota has received a number of reports regarding the halogen head lamps on certain 2010 ? 2011 model year Prius vehicles. In these reports, customers have indicated that their vehicle?s halogen low beam headlamp bulb lifetime is shorter than expected. Although the Halogen Low Beam Headlamp Bulbs are covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever occurs first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage related to the halogen head lamp bulbs due to these circumstances.

beam headlamp bulbs lifetime is shorter than expected.

headlamp bulbs lifetime is shorter than expected.

In these reports, customers have indicated that their vehicle?s halogen low beam headlamp bulb lifetime is shorter than expected. Although the Halogen Low Beam Headlamp Bulbs are covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever occurs first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage related to the halogen head lamp bulbs due to these circumstances.

In these reports, customers have indicated that their vehicle?s halogen low beam headlamp bulb lifetime is shorter than expected. Although the Halogen Low Beam Headlamp Bulbs are covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever occurs first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage related to the halogen head lamp bulbs due to these circumstances.

In these reports, customers have indicated that their vehicle?s halogen low beam headlamp bulb lifetime is shorter than expected. Although the Halogen Low Beam Headlamp Bulbs are covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever occurs first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage related to the halogen head lamp bulbs due to these circumstances.

In these reports, customers have indicated that their vehicle?s halogen low beam headlamp bulb lifetime is shorter than expected. Although the Halogen Low Beam Headlamp Bulbs are covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever occurs first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage related to the halogen head lamp bulbs due to these circumstances.

headlamp bulbs lifetime is shorter than expected. The Halogen Low Beam Headlamp Bulb is covered by Toyota's New Vehicle Limited Warranty* for 3 years or 36,000 miles (whichever occurs first). However, Toyota is announcing a Customer Support Program to cover repairs related to the halogen head lamp bulbs due to these circumstances.

Headlamp Bulbs ? Customer Support Program ZHB Dealer Letter now available on TIS.

headlamp bulbs lifetime is shorter than expected.

As an additional resource, if the vehicle is equipped with factory leather seats, the vehicle Owner?s Manual will highlight the importance of proper maintenance and provide guidance for care.

shorter than customer expectation. Follow the Repair Procedure in this bulletin to address this condition.

headlamp bulbs lifetime is shorter than expected.

As an additional resource, if the vehicle is equipped with factory leather seats, the vehicle Owner?s Manual will highlight the importance of proper maintenance and provide guidance for care.

Year Prius Coverage for Halogen Low Beam Headlamp Bulbs. Customer Support Program ZHB Certain 2010- 2011 Model Year Prius Coverage for Halogen Low Beam Headlamp Bulbs Currently there is limited inventory of repair kit part number 04007-52147, Toyota is working to increase supply of the kit. As Toyota works to increase supply, dealers are asked to follow the instructions below.

headlamp bulbs lifetime is shorter than expected.

headlamp bulbs lifetime is shorter than expected.

parameter details have been updated to clarify coverage for vehicles that have exhibited the condition in the past.

have exhibited the condition in the past. Toyota has received a number of reports regarding the halogen head lamps on certain 2010 ? 2011 model year Prius vehicles. In these reports, customers have indicated that their vehicle?s halogen low beam headlamp bulb lifetime is shorter than expected.

Once the subscription has expired the DCM (Telematics Transceiver) will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service. If registration of the replacement DCM part is attempted using the Techstream utility after the account has become inactive, the registration will fail, and messages such as ?ATX webserver is Down? or ?ATX error? will be displayed.

Once the subscription has expired the DCM (Telematics Transceiver) will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service. If registration of the replacement DCM part is attempted using the Techstream utility after the account has become inactive, the registration will fail, and messages such as ?ATX webserver is Down? or ?ATX error? will be displayed.

The trail period of service is provided upon the vehicle purchase. Once the subscription has expired the DCM (Telematics Transceiver) will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service. If registration of the replacement DCM part is attempted using the Techstream utility after the account has become inactive, the registration will fail, and messages such as "ATX webserver is Down" or "ATX error" will be displayed.

The customer's iPhone is connected to the vehicle via Bluetooth. The customer may complain of the following issues: When receiving two incoming calls simultaneously, both calls are ended automatically. iTunes Radio app does not play via Bluetooth audio. Podcast and Audiobook media playback is inoperative via Bluetooth audio.

Refer to the chart below for a comprehensive list of all current and previously issued USB SSTs and their applicability.

After entering into a contract, registration of an 8-digit XM Radio ID is required. This 8-digit XM Radio ID is found by turning to channel ?0? of the satellite radio.

to connect to the vehicle when first turning on the vehicle. These concerns can be caused by changes made on the customer's phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or they have restored their phone data/settings recently.

memory.

Refer to the chart below for a comprehensive list of all current and previously issued USB SSTs and their applicability.

Conditions typically experienced include inability to pair the iPhone to the system, poor sound quality during phone calls placed through the audio/navigation system, and the inability to place a hands free phone call using the audio/navigation system.

Conditions typically experienced include inability to pair the iPhone to the system, poor sound quality during phone calls placed through the audio/navigation system, and the inability to place a hands free phone call using the audio/navigation system.

Conditions typically experienced include inability to pair the iPhone to the system, poor sound quality during phone calls placed through the audio/navigation system, and the inability to place a hands free phone call using the audio/navigation system.

Refer to the chart below for a comprehensive list of all current and previously issued USB SSTs and their applicability.

systems.

Conditions typically experienced include inability to pair the iPhone to the system, poor sound quality during phone calls placed through the audio/navigation system, and the inability to place a hands free phone call using the audio/navigation system.

THE CUSTOMER'S IPHONE IS CONNECTED TO THE VEHICLE VIA BLUETOOTH. THE CUSTOMER MAY COMPLAIN OF THE FOLLOWING ISSUES: WHEN RECEIVING TWO INCOMING CALLS SIMULTANEOUSLY, BOTH CALLS ARE ENDED AUTOMATICALLY. ITUNES RADIO APP DOES NOT PLAY VIA BLUETOOTH AUDIO. PODCAST AND AUDIOBOOK MEDIA PLAYBACK IS INOPERATIVE VIA BLUETOOTH AUDIO.

The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.

The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.

noise in various driving conditions

noise in various driving conditions.

noise in various driving conditions.

noise in various driving conditions.

illuminate due to internal malfunctions.

Although the brake booster and brake booster pump assemblies are covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), Toyota is now offering a voluntary Customer Support Program that applies to certain internal malfunctions of the brake booster assemblies. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.

illuminate due to internal malfunctions.

2015 Model Year Prius PHV vehicles. Toyota has received reports about certain internal malfunctions of the brake booster assemblies in some of the subject vehicles. Although the brake booster and brake booster pump assemblies are covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), Toyota is now offering a voluntary Customer Support Program that applies to certain internal malfunctions of the brake booster assemblies. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.

The vehicle may also exhibit a grinding or scraping noise due to the uneven brake pad wear. An updated rear pad kit has been developed to address this condition.

equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the Brake Pedal Force Gauge. Refer to the appropriate Repair Manual for parking brake pedal travel inspection and adjustment specification.

THIS IS A SOFTWARE PROBLEM. 2010-2011 PRIUS. *RM

Diagnostic Trouble Codes (DTCs) P0A94, P324E, P0A1A, and/or P3004, indicating a malfunction has occurred in the inverter assembly with converter. Follow the Repair Procedure in this bulletin to identify the specific components within the inverter assembly with converter that need to be replaced and address this condition.

Diagnostic Trouble Codes (DTCs) P0A7A and/or P0A78, indicating a malfunction has occurred in the inverter assembly with converter. Follow the Repair Procedure in this bulletin to identify the specific components within the inverter assembly with converter that need to be replaced and address this condition.

The settlement provides a Customer Confidence Program and a Loaner/Towing Program (under certain circumstances) involving an enhancement to the warranty for the IPM or Inverter for 20 years with unlimited mileage, free loaner and/or towing, and reimbursement for prior IPM or inverter repairs.

Diagnostic Trouble Codes (DTCs) P0A94, P324E, P0A1A, and/or P3004, indicating a malfunction has occurred in the inverter assembly with converter. Follow the Repair Procedure in this bulletin to identify the specific components within the inverter assembly with converter that need to be replaced and address this condition.

Diagnostic Trouble Codes (DTCs) P0A94, P324E, P0A1A, and/or P3004, indicating a malfunction has occurred in the inverter assembly with converter. Follow the Repair Procedure in this bulletin to identify the specific components within the inverter assembly with converter that need to be replaced and address this condition.

replacement is now available for the hybrid inverter with converter assembly equipped on 2010 ? 2015 model year Prius and 2012 ? 2015 model year Prius V vehicles. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0092-14. ? The Parts Information section has been updated. Service Bulletin No. T-SB-0092-14 is obsolete and any printed versions should be discarded. APPLICABLE WARRANTY Please refer to vehicle Warranty and Maintenance Guide. NOTE Not all parts listed are needed for HV inverter repair, this list is for reference only. Refer to the Repair Manual for appropriate components based on the condition BEFORE ordering any parts.

P0A1A, or P3004, indicating a malfunction has occurred in the hybrid inverter assembly. To help identify the specific components within the inverter assembly that need to be replaced, follow the steps in this service bulletin to address the condition.

P0A1A, or P3004, indicating a malfunction has occurred in the hybrid inverter assembly. To help identify the specific components within the inverter assembly that need to be replaced, follow the steps in this service bulletin to address the condition.

P0A1A, or P3004, indicating a malfunction has occurred in the hybrid inverter assembly. To help identify the specific components within the inverter assembly that need to be replaced, follow the steps in this service bulletin to address the condition.

Prius Plug-in Hybrid Vehicles (PHV) and certain 2012 through 2013 RAV4 Electric Vehicles (EV). Sample Owner Letter labels are provided below for your reference.

replacement is now available for the Hybrid Inverter with Converter assembly equipped on 2010 - 2015 model year Prius and 2012 - 2015 model year Prius V vehicles.

replacement is now available for the Hybrid Inverter with Converter assembly equipped on 2010 - 2014 model year Prius vehicles.

replacement is now available for the Hybrid Inverter with Converter assembly equipped on 2010 - 2015 model year Prius and 2012 - 2015 model year Prius V vehicles.

P0A1A, OR P3004, INDICATING A MALFUNCTION HAS OCCURRED IN THE HYBRID INVERTER ASSEMBLY. TO HELP IDENTIFY THE SPECIFIC COMPONENTS WITHIN THE INVERTER ASSEMBLY THAT NEED TO BE REPLACED, FOLLOW THE STEPS IN THIS SERVICE BULLETIN TO ADDRESS THE CONDITION.

P0A1A, OR P3004, INDICATING A MALFUNCTION HAS OCCURRED IN THE HYBRID INVERTER ASSEMBLY. TO HELP IDENTIFY THE SPECIFIC COMPONENTS WITHIN THE INVERTER ASSEMBLY THAT NEED TO BE REPLACED, FOLLOW THE STEPS IN THIS SERVICE BULLETIN TO ADDRESS THE CONDITION.

Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).

have not yet had the following Safety Recall/Special Service Campaign repairs completed. Please note the following information for Regional and PD associates.

have not yet had the following Safety Recall/Special Service Campaign repairs completed. Please note the following information for Regional and PD associates.

have not yet had the following Safety Recall/Special Service Campaign repairs completed. Please note the following information for Regional and PD associates.

have not yet had the following Safety Recall/Special Service Campaign repairs completed. Please note the following information for Regional and PD associates.

Please see T-SB-0304-17.

Please see T-SB-0304-17.

The first year of service is provided in the vehicle purchase price. Once the subscription has expired the DCM (Telematics Transceiver) will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service.

The first year of service is provided in the vehicle purchase price. Once the subscription has lapsed the DCM will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service.

TMS is sending this communication for informational purposes in the event you are contacted by a customer covered by this recall.

Safety Connect is a vehicle option which requires a subscription fee for the system to be active. The first year of service is provided in the vehicle purchase price. Once the subscription has lapsed the DCM will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service.

The first year of service is provided in the vehicle purchase price. Once the subscription has lapsed the DCM will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service.

performance.

Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced

? Parts Information section has been updated. Some 2004 ? 2017 model year Toyota vehicles may exhibit odors naturally occurring from the HVAC system and/or related environmental factors. Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.

Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.

be involved.

be involved.

Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.

Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.

Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.

Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.

Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.

?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.

?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.

ST005-01, SU001-08, and T-SB-0391-08. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding. This Service Bulletin provides best practice procedures for vehicle pulling complaint, diagnosis, and repair for 2002 ? 2021 model year Toyota vehicles. This information supplements Repair Manual procedures when the symptoms are: ?Vehicle Pulling: The vehicle moves to the right or left when the driver holds the steering wheel while driving straight ahead without exerting steering effort. ?Steering Wheel Off Center: The vehicle travels straight, but the steering wheel is not pointed straight ahead. The vehicle is not pulling. Before repairing a vehicle pulling to one side, it is necessary to clearly identify the cause of the pulling condition. Frequently, pulling to one side is diagnosed as a wheel alignment concern. However, the actual cause may be related to the lateral force generated by the tires, vehicle damage, road crown or worn components. Performing a wheel alignment when tire force is the cause could result in the wheel alignment being set at a value outside of specifications. This could then cause other problems such as uneven tire wear, etc. A customer may notice a pull to the left when in the left lanes of travel and notice a pull to the right or no pull when traveling in the right lanes of travel on the very same section of roadway. This road crown effect is environmental and cannot be corrected with suspension adjustments or any other wheel or tire modification discussed in this bulletin.

? Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.

? Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.

? Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.

? Intermittent Bluetooth failure to connect when first turning on the vehicle. ? Various Bluetooth Audio functions are no longer functioning with the customer?s phone, such as the ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.

*Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. *Various Bluetooth Audio functions are no longer functioning with customer's phone such as ability to change the track using the steering wheel controls.

* Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. * Various Bluetooth Audio functions are no longer functioning with customer's phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer's phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.

* Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. * Various Bluetooth Audio functions are no longer functioning with customer's phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer's phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.

INTERMITTENT BLUETOOTH FAILURE TO CONNECT WHEN FIRST TURNING ON THE VEHICLE. VARIOUS BLUETOOTH AUDIO FUNCTIONS ARE NO LONGER FUNCTIONING WITH THE CUSTOMERS PHONE, SUCH AS THE ABILITY TO CHANGE THE TRACK USING THE STEERING WHEEL CONTROLS. THESE CONCERNS CAN BE CAUSED BY CHANGES MADE ON THE CUSTOMERS PHONE. MAKE SURE TO INQUIRE WITH THE CUSTOMER IF THE CONNECTIVITY CONCERNS OCCURRED AFTER RECEIVING AN OPERATING SYSTEM UPDATE ON THEIR PHONE OR IF THEY HAVE RESTORED THEIR PHONE DATA/SETTINGS RECENTLY."

This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.

Diagnostic Trouble Codes (DTCs) P0A94, P324E, P0A1A, and/or P3004, indicating a malfunction has occurred in the hybrid inverter assembly. To identify the specific components within the inverter assembly that need to be replaced, follow the Repair Procedure in this bulletin to address this condition.

Sometimes punctures may occur as a result of contact with road debris or other hazards. If a puncture occurs, it may be possible to repair the tire and return it to service. With a conventional tire it is not possible to drive for an extended amount of time with the tire at low pressures as damage to the tire may occur. With run-flat tires, due to reinforced sidewalls, it is possible to drive for up to 100 miles (160 km) at speeds less than 55 mph (90 km/h) with little or no damage to the tire.

Sometimes punctures may occur as a result of contact with road debris or other hazards. If a puncture occurs, it may be possible to repair the tire and return it to service. With a conventional tire it is not possible to drive for an extended amount of time with the tire at low pressures as damage to the tire may occur. With run-flat tires, due to reinforced sidewalls, it is possible to drive for up to 100 miles (160 km) at speeds less than 55 mph (90 km/h) with little or no damage to the tire.

Sometimes punctures may occur as a result of contact with road debris or other hazards. If a puncture occurs, it may be possible to repair the tire and return it to service. With a conventional tire it is not possible to drive for an extended amount of time with the tire at low pressures as damage to the tire may occur. With run-flat tires, due to reinforced sidewalls, it is possible to drive for up to 100 miles at speeds less than 55 mph with little or no damage to the tire. The U.S. Tire Manufacturers Association (UTSMA) provides guidelines and recommendations for tire repair and replacement. It also provides information related to: ? Basic tire information ? Tire maintenance and safety ? Driver education, tire safety curriculum.

Sometimes punctures may occur as a result of contact with road debris or other hazards. If a puncture occurs, it may be possible to repair the tire and return it to service. With a conventional tire it is not possible to drive for an extended amount of time with the tire at low pressures as damage to the tire may occur. With run-flat tires, due to reinforced sidewalls, it is possible to drive for up to 100 miles at speeds less than 55 mph with little or no damage to the tire. The U.S. Tire Manufacturers Association (UTSMA) provides guidelines and recommendations for tire repair and replacement. It also provides information related to: ? Basic tire information ? Tire maintenance and safety ? Driver education, tire safety curriculum.

reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pretensioner devices did not perform as expected, please follow the steps in the recommendations section below.

Some hazardous material treatment and handling regulations at the state and local level define the pre-disposal deployment of airbag and pre-tensioner assemblies as hazardous material treatment. Hazardous material treatment may require special training, certification or licensing in certain areas. TMS recommends that dealership personnel carefully review and follow ALL local and state regulations, and where necessary, contract with Environmental Protection Agency (EPA) Licensed Hazardous Waste Transportation and Disposal facilities.

Toyota does NOT recommend replacement of original seat covers with non-Toyota leather or other seat cover materials on vehicles due to the following: Seat covers NOT recommended by Toyota may affect side airbag performance, in general or in part, during an accident. Modifications that negatively affect side airbag performance can result in severe occupant injuries. Seat covers are an integral part of this safety system. Replacing fabric seat covers with non-Toyota leather or other seat cover materials may compromise the effectiveness of this safety system. The design of the seat is complex, integrating safety and strength with comfort and luxury. Toyota strongly discourages modifying original equipment seats that have optional side airbags. Additionally, Toyota strongly advises against the installation or use of aftermarket seat covers, which could impair the performance of the side airbags in the event of an accident.

seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pre-tensioner devices did not perform as expected (including an unintended deployment event), please follow the steps in the recommendations section below.

*PE

Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or they have restored their phone data/settings recently.

mileage between scheduled maintenance checks. Here are some important tips when working with ATF-WS in Toyota vehicles requiring it's use.

available for the Hybrid Transaxle assembly equipped on 2007 - 2011 model year Camry HV, 2006 - 2015 model year Highlander HV, 2010 - 2015 model year Prius, and 2012 - 2015 model year Prius PHV and Prius V vehicles.