2007 Toyota Camry Hybrid TSBs

These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.

T-SB-0012-13. Service Bulletin No. T-SB-0012-13 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Toyota term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ?ECU? is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Toyota specific control unit

This Warranty Enhancement Program will be launched in two phases due to current part production capacity limitations. Initially, Toyota will inform owners that they may seek reimbursement consideration for previous repairs to address excessive oil consumption. Additionally, owners will be advised that if they believe their vehicle has excessive engine oil consumption, they can contact an authorized Toyota dealer to have the engine oil consumption test performed to determine if they will be eligible for future part replacement once sufficient parts are available. Once sufficient parts are produced, Toyota will send a second owner notification letter to customers informing them they may seek part replacement if their vehicle has excessive engine oil consumption.

Enhancement Program to extend warranty coverage to address customer complaints of Excessive Engine Oil Consumption on Certain 2007-2009 Camry, Certain 2007-2011 Camry Hybrid, Certain 2007-2008 Camry Solara, Certain 2009-2011 Corolla, Certain 2009-2013 Corolla Matrix, Certain 2006-2008 RAV4, Certain 2007-2010 Scion tC, and Certain 2008-2015 Scion xB, vehicles equipped with a 2AZ engine. Toyota is now announcing the part replacement phase of Warranty Enhancement Program ZE7 for vehicles exhibiting excessive engine oil consumption. Eligibility for part replacement under this Warranty Enhancement Program is dependent on a Toyota dealer performed engine oil consumption test in accordance with T-SB-00158-14(Toyota) and S-SB-0031-14 (Scion).

Enhancement Program to extend warranty coverage to address customer complaints of Excessive Engine Oil Consumption on Certain 2007-2009 Camry, Certain 2007-2011 Camry Hybrid, Certain 2007-2008 Camry Solara, Certain 2009-2011 Corolla, Certain 2009-2013 Corolla Matrix, Certain 2006-2008 RAV4, Certain 2007-2010 Scion tC, and Certain 2008-2015 Scion xB, vehicles equipped with a 2AZ engine. Toyota is now announcing the part replacement phase of Warranty Enhancement Program ZE7 for vehicles exhibiting excessive engine oil consumption. Eligibility for part replacement under this Warranty Enhancement Program is dependent on a Toyota dealer performed engine oil consumption test in accordance with T-SB-00158-14(Toyota) and S-SB-0031-14 (Scion).

has announced a Warranty Enhancement Program to extend warranty coverage to address customer complaints of Excessive Engine Oil Consumption on Certain 2007-2009 Camry, Certain 2007-2011 Camry Hybrid, Certain 2007-2008 Camry Solara, Certain 2009-2011 Corolla, Certain 2009-2013 Corolla Matrix, Certain 2006-2008 RAV4, Certain 2007- 2010 Scion tC, and Certain 2008-2015 Scion xB, vehicles equipped with a 2AZ engine.

potential rough engine idle, and possible engine stall condition while the vehicle is stopped. This symptoms will be accompanied by a MIL "ON" condition with Diagnostic Trouble Code (DTC) P2111 (Throttle Actuator Control System -Stuck Open)/ Follow the Repair Procedure in this bulletin to address this condition.

Toyota is now announcing the part replacement phase of Warranty Enhancement Program ZE7 for vehicles exhibiting excessive engine oil consumption.

This Tech Tip contains the accepted installation method required for Toyota vehicles.

Oil Consumption repair procedure. Replacement pistons for ZE7 should be ordered based on the pistons removed from the existing cylinder block and no longer by the measurement. This Tech Tip includes information regarding production allocation and instructions for identifying piston type on subject engines. this will be published in the next revision of T-SB-0030-15

This Tech Tip contains the accepted installation method required for Toyota vehicles.

signoff sheet for excessive engine oil consumption testing on 2AZ engine models. This TSB references a Tamper Evident/Inspection Label that Toyota recommends for use during this procedure. Currently, the supplier noted in the TSB is unable to support dealer orders for this product. Toyota has placed a large bulk order of these labels and will be distributing a package containing approximately 20 tamper evident/inspection labels to your dealership. The shipment of labels is scheduled to arrive at your dealership the week of 12/22/2014. Toyota is currently working on making these labels available through the Material Distribution Center, and it is anticipated the labels will be available for dealer ordering through the MDC in late January 2015. In the meantime, if you require additionally Tamper Evident/Inspection Labels or Tape, we recommend that you source a locally available alternative product.

Warranty Enhancement Program to extend warranty coverage to address customer compaints of Excessive Engine Oil Consumption on certain 2007-2009 Camry, Certain 2007-2011 Camry Hybrid, Certain 2007-2008 Camry Solara, Certain 2009-2010, Certain 2009 Corolla Matrix, Certain 2006-2008 RAV4, Certain 2007-2009 Scion tC, and Certain 2008-2009 Scion xB vehicles equipped with a 2AZ engine.

Warranty Enhancement Program to extend warranty coverage to address customer compaints of Excessive Engine Oil Consumption on certain 2007-2009 Camry, Certain 2007-2011 Camry Hybrid, Certain 2007-2008 Camry Solara, Certain 2009-2010, Certain 2009 Corolla Matrix, Certain 2006-2008 RAV4, Certain 2007-2009 Scion tC, and Certain 2008-2009 Scion xB vehicles equipped with a 2AZ engine.

The piston assembly has been changed to minimize oil consumption. Use the Inspection Procedure in this bulletin to confirm this condition.

Toyota has announced a Warranty Enhancement Program to extend warranty coverage to address customer complaints of Excessive Engine Oil Consumption on Certain 2007-2009 Camry, Certain 2007-2011 Camry Hybrid, Certain 2007-2008 Camry Solara, Certain 2009-2011 Corolla, Certain 2009-2013 Corolla Matrix, Certain 2006-2008 RAV4, Certain 2007- 2010 Scion tC, and Certain 2008-2015 Scion xB, vehicles equipped with a 2AZ engine.

Toyota has announced a Warranty Enhancement Program to extend warranty coverage to address customer complaints of Excessive Engine Oil Consumption on Certain 2007-2009 Camry, Certain 2007-2011 Camry Hybrid, Certain 2007-2008 Camry Solara, Certain 2009-2011 Corolla, Certain 2009-2013 Corolla Matrix, Certain 2006-2008 RAV4, Certain 2007-2010 Scion tC, and Certain 2008-2015 Scion xB, vehicles equipped with a 2AZ engine.

The piston assembly has been changed to minimize oil consumption. Use the Inspection Procedure in this bulletin to confirm this condition.

Toyota is now announcing the part replacement phase of Warranty Enhancement Program ZE7 for vehicles exhibiting excessive engine oil consumption.

Toyota is now announcing the part replacement phase of Warranty Enhancement Program ZE7 for vehicles exhibiting excessive engine oil consumption.

signoff sheet for excessive engine oil consumption testing on 2AZ engine models. This TSB references a Tamper Evident/Inspection Label that Toyota recommends for use during this procedure. Currently, the supplier noted in the TSB is unable to support dealer orders for this product. Toyota has placed a large bulk order of these labels and will be distributing a package containing approximately 20 tamper evident/inspection labels to your dealership. The shipment of labels is scheduled to arrive at your dealership the week of 12/22/2014. Toyota is currently working on making these labels available through the Material Distribution Center, and it is anticipated the labels will be available for dealer ordering through the MDC in late January 2015. In the meantime, if you require additionally Tamper Evident/Inspection Labels or Tape, we recommend that you source a locally available alternative product.

Warranty Enhancement Program to extend warranty coverage to address customer compaints of Excessive Engine Oil Consumption on certain 2007-2009 Camry, Certain 2007-2011 Camry Hybrid, Certain 2007-2008 Camry Solara, Certain 2009-2010, Certain 2009 Corolla Matrix, Certain 2006-2008 RAV4, Certain 2007-2009 Scion tC, and Certain 2008-2009 Scion xB vehicles equipped with a 2AZ engine.

Warranty Enhancement Program to extend warranty coverage to address customer compaints of Excessive Engine Oil Consumption on certain 2007-2009 Camry, Certain 2007-2011 Camry Hybrid, Certain 2007-2008 Camry Solara, Certain 2009-2010, Certain 2009 Corolla Matrix, Certain 2006-2008 RAV4, Certain 2007-2009 Scion tC, and Certain 2008-2009 Scion xB vehicles equipped with a 2AZ engine.

Toyota has announced a Warranty Enhancement Program to extend warranty coverage to address customer complaints of Excessive Engine Oil Consumption on Certain 2007-2009 Camry, Certain 2007-2011 Camry Hybrid, Certain 2007-2008 Camry Solara, Certain 2009-2011 Corolla, Certain 2009-2013 Corolla Matrix, Certain 2006-2008 RAV4, Certain 2007- 2010 Scion tC, and Certain 2008-2015 Scion xB, vehicles equipped with a 2AZ engine.

Toyota has announced a Warranty Enhancement Program to extend warranty coverage to address customer complaints of Excessive Engine Oil Consumption on Certain 2007-2009 Camry, Certain 2007-2011 Camry Hybrid, Certain 2007-2008 Camry Solara, Certain 2009-2011 Corolla, Certain 2009-2013 Corolla Matrix, Certain 2006-2008 RAV4, Certain 2007-2010 Scion tC, and Certain 2008-2015 Scion xB, vehicles equipped with a 2AZ engine.

This Warranty Enhancement Program will be launched in two phases due to current part production capacity limitations. Initially, Toyota will inform owners that they may seek reimbursement consideration for previous repairs to address excessive oil consumption. Additionally, owners will be advised that if they believe their vehicle has excessive engine oil consumption, they can contact an authorized Toyota dealer to have the engine oil consumption test performed to determine if they will be eligible for future part replacement once sufficient parts are available. Once sufficient parts are produced, Toyota will send a second owner notification letter to customers informing them they may seek part replacement if their vehicle has excessive engine oil consumption.

Enhancement Program to extend warranty coverage to address customer complaints of Excessive Engine Oil Consumption on Certain 2007-2009 Camry, Certain 2007-2011 Camry Hybrid, Certain 2007-2008 Camry Solara, Certain 2009-2011 Corolla, Certain 2009-2013 Corolla Matrix, Certain 2006-2008 RAV4, Certain 2007-2010 Scion tC, and Certain 2008-2015 Scion xB, vehicles equipped with a 2AZ engine. Toyota is now announcing the part replacement phase of Warranty Enhancement Program ZE7 for vehicles exhibiting excessive engine oil consumption. Eligibility for part replacement under this Warranty Enhancement Program is dependent on a Toyota dealer performed engine oil consumption test in accordance with T-SB-00158-14(Toyota) and S-SB-0031-14 (Scion).

Enhancement Program to extend warranty coverage to address customer complaints of Excessive Engine Oil Consumption on Certain 2007-2009 Camry, Certain 2007-2011 Camry Hybrid, Certain 2007-2008 Camry Solara, Certain 2009-2011 Corolla, Certain 2009-2013 Corolla Matrix, Certain 2006-2008 RAV4, Certain 2007-2010 Scion tC, and Certain 2008-2015 Scion xB, vehicles equipped with a 2AZ engine. Toyota is now announcing the part replacement phase of Warranty Enhancement Program ZE7 for vehicles exhibiting excessive engine oil consumption. Eligibility for part replacement under this Warranty Enhancement Program is dependent on a Toyota dealer performed engine oil consumption test in accordance with T-SB-00158-14(Toyota) and S-SB-0031-14 (Scion).

has announced a Warranty Enhancement Program to extend warranty coverage to address customer complaints of Excessive Engine Oil Consumption on Certain 2007-2009 Camry, Certain 2007-2011 Camry Hybrid, Certain 2007-2008 Camry Solara, Certain 2009-2011 Corolla, Certain 2009-2013 Corolla Matrix, Certain 2006-2008 RAV4, Certain 2007- 2010 Scion tC, and Certain 2008-2015 Scion xB, vehicles equipped with a 2AZ engine.

Toyota is now announcing the part replacement phase of Warranty Enhancement Program ZE7 for vehicles exhibiting excessive engine oil consumption.

Toyota is now announcing the part replacement phase of Warranty Enhancement Program ZE7 for vehicles exhibiting excessive engine oil consumption.

Toyota has received some reports where vehicles may exhibit excessive engine oil consumption. Toyota is now announcing the part replacement phase of Warranty Enhancement Program ZE7 for vehicles exhibiting excessive engine oil consumption.

T-SB-0158-14, "2AZ Engine Oil Consumption Inspection Procedure," MUST be performed first BEFORE continuing with the procedure in this bulletin. Some 2006 - 2013 model year vehicles equipped with the 2AZ engine may exhibit engine oil consumption. The piston assembly has been changed to minimize oil consumption. Use the following Repair Procedure to address this condition.

Toyota is now announcing the part replacement phase of Warranty Enhancement Program ZE7 for vehicles exhibiting excessive oil consumption.

Oil Consumption repair procedure. * Replacement pistons for ZE7 should be ordered based on the pistons removed from existing cylinder block and no longer by measurement. * This Tech Tip includes information regarding production allocation and instructions for identifying piston type on subject engines. This will be published in the next revision of T-SB-0030-15.

The piston assembly has been changed to minimize oil consumption. Use the following Repair Procedure to address this condition.

Currently, when a new short block assembly is ordered for a vehicle, dowels pins connecting the short block to the crankcase stiffener are not present.

60,000 miles (whichever occurs first). However, Toyota is announcing a Warranty Enhancement Program to cover warranty work for parts replacement to address excessive engine oil consumption*. *NOTE: Eligibility for parts replacement under this Warranty Enhancement Program is dependent on the results of a dealer performed engine oil consumption test. This Warranty Enhancement Program provides a Primary and Secondary coverage extension to the vehicle's "New Vehicle Limited Warranty" for replacement of parts related to Excessive Engine Oil Consumption. If the condition is verified, warranty work will be performed in accordance with applicable Technical Service Bulletin under the terms of this Warranty Enhancement Program.

60,000 miles (whichever occurs first). However, Toyota is announcing a Warranty Enhancement Program to cover warranty work for parts replacement to address excessive engine oil consumption*. *NOTE: Eligibility for parts replacement under this Warranty Enhancement Program is dependent on the results of a dealer performed engine oil consumption test. This Warranty Enhancement Program provides a Primary and Secondary coverage extension to the vehicle's "New Vehicle Limited Warranty" for replacement of parts related to Excessive Engine Oil Consumption. If the condition is verified, warranty work will be performed in accordance with applicable Technical Service Bulletin under the terms of this Warranty Enhancement Program.

The piston assembly has been changed to minimize oil consumption. Use the Inspection Procedure in this bulletin to confirm this condition.

This Warranty Enhancement Program will be launched in two phases due to current part production capacity limitations. Initially, Toyota will inform owners that they may seek reimbursement consideration for previous repairs to address excessive oil consumption. Additionally, owners will be advised that if they believe their vehicle has excessive engine oil consumption, they can contact an authorized Toyota dealer to have the engine oil consumption test performed to determine if they will be eligible for future part replacement once sufficient parts are available. Once sufficient parts are produced, Toyota will send a second owner notification letter to customers informing them they may seek part replacement if their vehicle has excessive engine oil consumption.

Enhancement Program to extend warranty coverage to address customer complaints of Excessive Engine Oil Consumption on Certain 2007-2009 Camry, Certain 2007-2011 Camry Hybrid, Certain 2007-2008 Camry Solara, Certain 2009-2011 Corolla, Certain 2009-2013 Corolla Matrix, Certain 2006-2008 RAV4, Certain 2007-2010 Scion tC, and Certain 2008-2015 Scion xB, vehicles equipped with a 2AZ engine.

and S-SB-0031-14 (Scion) is now available at the MDC. The bulletins will be updated to reflect the new ordering process and posted on TIS in the near future.

The piston assembly has been changed to minimize oil consumption. Use the following Repair Procedure to address this condition.

The piston assembly has been changed to minimize oil consumption. Use the following Repair Procedure to address this condition.

Enhancement Program to extend warranty coverage to address customer complaints of Excessive Engine Oil Consumption on Certain 2007 - 2009 Camry, Certain 2007 - 2011 Camry Hybrid, Certain 2007 - 2008 Camry Solara, Certain 2009 - 2011 Corolla, Certain 2009 - 2013 Corolla Matrix, Certain 2006 - 2008 RAV4, Certain 2007 - 2010 Scion tC, and Certain 2008 - 2015 Scion xB, vehicles equipped with a 2AZ engine. Toyota is now announcing the part replacement phase of Warranty Enhancement Program ZE7 for vehicles exhibiting excessive engine oil consumption. Eligibility for part replacement under this Warranty Enhancement Program is dependent on a Toyota dealer performed engine oil consumption test in accordance with T-SB-00158-14(Toyota) and S-SB-0031-14 (Scion).

Toyota is now announcing the part replacement phase of Warranty Enhancement Program ZE7 for vehicles exhibiting excessive engine oil consumption.

The piston assembly has been changed to minimize oil consumption. Use the following Repair Procedure to address this condition.

and S-SB-0031-14 (Scion) is now available at the MDC. The bulletins will be updated to reflect the new ordering process and posted on TIS in the near future.

The piston assembly has been changed to minimize oil consumption. Use the following Repair Procedure to address this condition.

The piston assembly has been changed to minimize oil consumption. Use the Inspection Procedure in this bulletin to confirm this condition.

T-SB-0158-14, "2AZ Engine Oil Consumption Inspection Procedure," MUST be performed first BEFORE continuing with the procedure in this bulletin. Some 2006 - 2013 model year vehicles equipped with the 2AZ engine may exhibit engine oil consumption. The piston assembly has been changed to minimize oil consumption. Use the following Repair Procedure to address this condition.

Enhancement Program to extend warranty coverage to address customer complaints of Excessive Engine Oil Consumption on Certain 2007 - 2009 Camry, Certain 2007 - 2011 Camry Hybrid, Certain 2007 - 2008 Camry Solara, Certain 2009 - 2011 Corolla, Certain 2009 - 2013 Corolla Matrix, Certain 2006 - 2008 RAV4, Certain 2007 - 2010 Scion tC, and Certain 2008 - 2015 Scion xB, vehicles equipped with a 2AZ engine. Toyota is now announcing the part replacement phase of Warranty Enhancement Program ZE7 for vehicles exhibiting excessive engine oil consumption. Eligibility for part replacement under this Warranty Enhancement Program is dependent on a Toyota dealer performed engine oil consumption test in accordance with T-SB-00158-14 (Toyota) and S-SB-0031-14 (Scion).

Toyota is now announcing the part replacement phase of Warranty Enhancement Program ZE7 for vehicles exhibiting excessive engine oil consumption.

This Warranty Enhancement Program will be launched in two phases due to current part production capacity limitations. Initially, Toyota will inform owners that they may seek reimbursement consideration for previous repairs to address excessive oil consumption. Additionally, owners will be advised that if they believe their vehicle has excessive engine oil consumption, they can contact an authorized Toyota dealer to have the engine oil consumption test performed to determine if they will be eligible for future part replacement once sufficient parts are available. Once sufficient parts are produced, Toyota will send a second owner notification letter to customers informing them they may seek part replacement if their vehicle has excessive engine oil consumption.

Enhancement Program to extend warranty coverage to address customer complaints of Excessive Engine Oil Consumption on Certain 2007 - 2009 Camry, Certain 2007 - 2011 Camry Hybrid, Certain 2007 - 2008 Camry Solara, Certain 2009 - 2011 Corolla, Certain 2009 - 2013 Corolla Matrix, Certain 2006 - 2008 RAV4, Certain 2007 - 2010 Scion tC, and Certain 2008 - 2015 Scion xB, vehicles equipped with a 2AZ engine.

TOYOTA IS NOW ANNOUNCING THE PART REPLACEMENT PHASE OF WARRANTY ENHANCEMENT PROGRAM ZE7 FOR VEHICLES EXHIBITING EXCESSIVE ENGINE OIL CONSUMPTION.

THIS TECH TIP CONTAINS THE ACCEPTED INSTALLATION METHOD REQUIRED FOR TOYOTA VEHICLES.

OIL CONSUMPTION REPAIR PROCEDURE. REPLACEMENT PISTONS FOR ZE7 SHOULD BE ORDERED BASED ON THE PISTONS REMOVED FROM THE EXISTING CYLINDER BLOCK AND NO LONGER BY THE MEASUREMENT. THIS TECH TIP INCLUDES INFORMATION REGARDING PRODUCTION ALLOCATION AND INSTRUCTIONS FOR IDENTIFYING PISTON TYPE ON SUBJECT ENGINES. THIS WILL BE PUBLISHED IN THE NEXT REVISION OF T-SB-0030-15

THIS TECH TIP CONTAINS THE ACCEPTED INSTALLATION METHOD REQUIRED FOR TOYOTA VEHICLES.

TOYOTA IS NOW ANNOUNCING THE PART REPLACEMENT PHASE OF WARRANTY ENHANCEMENT PROGRAM ZE7 FOR VEHICLES EXHIBITING EXCESSIVE OIL CONSUMPTION.

2AZ OIL CONSUMPTION REPAIR PROCEDURE. H REPLACEMENT PISTONS FOR ZE7 SHOULD BE ORDERED BASED ON THE PISTONS REMOVED FROM EXISTING CYLINDER BLOCK AND NO LONGER BY MEASUREMENT. H THIS TECH TIP INCLUDES INFORMATION REGARDING PRODUCTION ALLOCATION AND INSTRUCTIONS FOR IDENTIFYING PISTON TYPE ON SUBJECT ENGINES. THIS WILL BE PUBLISHED IN THE NEXT REVISION OF T-SB-0030-15."

THE PISTON ASSEMBLY HAS BEEN CHANGED TO MINIMIZE OIL CONSUMPTION. USE THE FOLLOWING REPAIR PROCEDURE TO ADDRESS THIS CONDITION."

CURRENTLY, WHEN A NEW SHORT BLOCK ASSEMBLY IS ORDERED FOR A VEHICLE, DOWELS PINS CONNECTING THE SHORT BLOCK TO THE CRANKCASE STIFFENER ARE NOT PRESENT."

CURRENTLY, WHEN A NEW SHORT BLOCK ASSEMBLY IS ORDERED FOR A VEHICLE, DOWELS PINS CONNECTING THE SHORT BLOCK TO THE CRANKCASE STIFFENER ARE NOT PRESENT.IF YOU ARE PERFORMING A SHORT BLOCK REPLACEMENT UNDER ZE7, PLEASE ORDER THE FOLLOWING PARTS IN ADDITION TO THE SHORT BLOCK, AND INSTALL IN THE NEW SHORT BLOCK UPON RECEIPT."

POTENTIAL ROUGH ENGINE IDLE, AND POSSIBLE ENGINE STALL CONDITION WHILE THE VEHICLE IS STOPPED. THIS SYMPTOMS WILL BE ACCOMPANIED BY A MIL "ON" CONDITION WITH DIAGNOSTIC TROUBLE CODE (DTC) P2111 (THROTTLE ACTUATOR CONTROL SYSTEM -STUCK OPEN)/ FOLLOW THE REPAIR PROCEDURE IN THIS BULLETIN TO ADDRESS THIS CONDITION.

60,000 MILES (WHICHEVER OCCURS FIRST). HOWEVER, TOYOTA IS ANNOUNCING A WARRANTY ENHANCEMENT PROGRAM TO COVER WARRANTY WORK FOR PARTS REPLACEMENT TO ADDRESS EXCESSIVE ENGINE OIL CONSUMPTION*. *NOTE: ELIGIBILITY FOR PARTS REPLACEMENT UNDER THIS WARRANTY ENHANCEMENT PROGRAM IS DEPENDENT ON THE RESULTS OF A DEALER PERFORMED ENGINE OIL CONSUMPTION TEST. THIS WARRANTY ENHANCEMENT PROGRAM PROVIDES A PRIMARY AND SECONDARY COVERAGE EXTENSION TO THE VEHICLES NEW VEHICLE LIMITED WARRANTY FOR REPLACEMENT OF PARTS RELATED TO EXCESSIVE ENGINE OIL CONSUMPTION. IF THE CONDITION IS VERIFIED, WARRANTY WORK WILL BE PERFORMED IN ACCORDANCE WITH APPLICABLE TECHNICAL SERVICE BULLETIN UNDER THE TERMS OF THIS WARRANTY ENHANCEMENT PROGRAM."

60,000 MILES (WHICHEVER OCCURS FIRST). HOWEVER, TOYOTA IS ANNOUNCING A WARRANTY ENHANCEMENT PROGRAM TO COVER WARRANTY WORK FOR PARTS REPLACEMENT TO ADDRESS EXCESSIVE ENGINE OIL CONSUMPTION*. *NOTE: ELIGIBILITY FOR PARTS REPLACEMENT UNDER THIS WARRANTY ENHANCEMENT PROGRAM IS DEPENDENT ON THE RESULTS OF A DEALER PERFORMED ENGINE OIL CONSUMPTION TEST. THIS WARRANTY ENHANCEMENT PROGRAM PROVIDES A PRIMARY AND SECONDARY COVERAGE EXTENSION TO THE VEHICLES NEW VEHICLE LIMITED WARRANTY FOR REPLACEMENT OF PARTS RELATED TO EXCESSIVE ENGINE OIL CONSUMPTION. IF THE CONDITION IS VERIFIED, WARRANTY WORK WILL BE PERFORMED IN ACCORDANCE WITH APPLICABLE TECHNICAL SERVICE BULLETIN UNDER THE TERMS OF THIS WARRANTY ENHANCEMENT PROGRAM."

TOYOTA IS NOW ANNOUNCING THE PART REPLACEMENT PHASE OF WARRANTY ENHANCEMENT PROGRAM ZE7 FOR VEHICLES EXHIBITING EXCESSIVE ENGINE OIL CONSUMPTION.

TOYOTA HAS RECEIVED SOME REPORTS WHERE VEHICLES MAY EXHIBIT EXCESSIVE ENGINE OIL CONSUMPTION. TOYOTA IS NOW ANNOUNCING THE PART REPLACEMENT PHASE OF WARRANTY ENHANCEMENT PROGRAM ZE7 FOR VEHICLES EXHIBITING EXCESSIVE ENGINE OIL CONSUMPTION.

*LJ

SELECT DOCUMENT SEARCH BUTTON BELOW. INFORMATION REGARDING ENGINE OIL CONSUMPTION ON CERTAIN CAMRY, SOLARA, COROLLA, MATRIX, SCION AND RAV4 VEHICLES. *LJ

MODEL 2006-2012 CAMRY, CAMRY HV, COROLLA, MATRIX, RAV4, SOLARA. *PE

A PROCEDURE FOR INSTALLATION, BLOWER MOTOR CLEANING, EVAPORATOR REMOVAL AND HVAC SYSTEM CLEANING HAS BEEN DESIGNED FOR THIS CONDITION. *PE

ENGINE CONTROL. PROVIDE UPDATED THROTTLE BODY PART NUMBER INFORMATION FOR CERTAIN VEHICLES. THE DRAIN PIPE HAS BEEN ELIMINATED ON THROTTLE BODY SERVICE PARTS. *PE

ON CONDITION WITH DIAGNOSTIC TROUBLE CODES (DTC) P0351-P0354 (IGNITION COIL PRIMARY/SECONDARY CIRCUIT) STORED IN THE ENGINE CONTROL MODULE/ECM (SAE TERM: POWERTRAIN CONTROL MODULE/PCM). THE ECM/PCM LOGIC HAS BEEN IMPROVED TO PREVENT THIS CONDITION. *PE

DUE TO INSUFFICIENT ADHESION BETWEEN THE PERMANENT MAGNETS AND THE ROTOR OF THE EPS, THE MOTOR MAY GRADUALLY LOSE TORQUE WHEN THE WHEEL IS TURNED TO COMPLETE LEFT OR RIGHT POSITION. CSC LETTER WAS RECEIVED. *PE

*NJ

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.

If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.

wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.

If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.

If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

This material protects from acid rain, environmental fallout, and rail contamination.

wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.

If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2003-2005 model year 4Runner, 2005-2010 model year Avalon, 2007-2011 model year Camry and Camry Hybrid, 2004-2010 model year Sienna, and 2004-2008 model year Solara vehicles.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2003-2005 model year 4Runner, 2005-2010 model year Avalon, 2007-2011 model year Camry and Camry Hybrid, 2004-2010 model year Sienna, and 2004-2008 model year Solara vehicles.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2003-2005 model year 4Runner, 2005-2010 model year Avalon, 2007-2011 model year Camry and Camry Hybrid, 2004-2010 model year Sienna, and 2004-2008 model year Solara vehicles.

This program extends the warranty coverage for repairs related to cracked and/or sticky/melted dashboards (Instrument Panels) as a result of heat or humidity on 2003-2005 model year 4Runner, 2005-2010 model year Avalon, 2007-2011 model year Camry and Camry Hybrid, 2004-2010 model year Sienna, and 2004-2008 model year Solara vehicles.

This program extends the warranty coverage for repairs related to cracked and/or sticky/melted dashboards (Instrument Panels) as a result of heat or humidity on 2003-2005 model year 4Runner, 2005-2010 model year Avalon, 2007-2011 model year Camry and Camry Hybrid, 2004-2010 model year Sienna, and 2004-2008 model year Solara vehicles.

This program extends the warranty coverage for repairs related to cracked and/or sticky/melted dashboards (Instrument Panels) as a result of heat or humidity on 2003-2005 model year 4Runner, 2005-2010 model year Avalon, 2007-2011 model year Camry and Camry Hybrid, 2004-2010 model year Sienna, and 2004-2008 model year Solara vehicles.

This program extends the warranty coverage for repairs related to cracked and/or sticky/melted dashboards (Instrument Panels) as a result of heat or humidity on 2003-2005 model year 4Runner, 2005-2010 model year Avalon, 2007-2011 model year Camry and Camry Hybrid, 2004-2010 model year Sienna, and 2004-2008 model year Solara vehicles.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2003-2005 model year 4Runner, 2005-2010 model year Avalon, 2007-2011 model year Camry and Camry Hybrid, 2004-2010 model year Sienna, and 2004-2008 model year Solara vehicles.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2003-2005 model year 4Runner, 2005-2010 model year Avalon, 2007-2011 model year Camry and Camry Hybrid, 2004-2010 model year Sienna, and 2004-2008 model year Solara vehicles.

as a Result of Heat or Humidity.

PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. REVISION NOTICE January 11, 2018 ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.

metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.

These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2003 - 2005 model year 4Runner, 2005 - 2010 model year Avalon, 2007 - 2011 model year Camry and Camry Hybrid, 2004 -2010 model year Sienna, and 2004 - 2008 model year Solara vehicles. In Mid-December, 2014 Toyota announced the reimbursement Phase of this Program. Since prior to that announcement, Toyota has been diligently making parts preparations for the parts replacement phase of this Program. Due to the age, volume, and breadth of the covered vehicles subject to the Program and the size and complexity of dashboard manufacturing, Toyota will be launching the part replacement portion of this Program is several phases; please refer to the table below for part replacement model phasing.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2003 - 2005 model year 4Runner, 2005 - 2010 model year Avalon, 2007 - 2011 model year Camry and Camry Hybrid, 2004 - 2010 model year Sienna, and 2004 - 2008 model year Solara vehicles.

These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2003 - 2005 model year 4Runner, 2005 - 2010 model year Avalon, 2007 - 2011 model year Camry and Camry Hybrid, 2004 - 2010 model year Sienna, and 2004 - 2008 model year Solara vehicles. In Mid-December, 2014 Toyota announced the reimbursement Phase of this Program. Since prior to that announcement, Toyota has been diligently making parts preparations for the parts replacement phase of this Program. Due to the age, volume, and breadth of the covered vehicles subject to the Program and the size and complexity of dashboard manufacturing, Toyota will be launching the part replacement portion of this Program is several phases; please refer to the table below for part replacement model phasing.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2003 - 2005 model year 4Runner, 2005 - 2010 model year Avalon, 2007 - 2011 model year Camry and Camry Hybrid, 2004 - 2010 model year Sienna, and 2004 - 2008 model year Solara vehicles.

THIS PROGRAM EXTENDS THE WARRANTY COVERAGE FOR REPAIRS RELATED TO CRACKED AND/OR STICKY/MELTING DASHBOARDS (INSTRUMENT PANELS) AS A RESULT OF HEAT OR HUMIDITY ON 2003-2005 MODEL YEAR 4RUNNER, 2005-2010 MODEL YEAR AVALON, 2007-2011 MODEL YEAR CAMRY AND CAMRY HYBRID, 2004-2010 MODEL YEAR SIENNA, AND 2004-2008 MODEL YEAR SOLARA VEHICLES.

THIS CAUSES THE FOOT WELL TO BE WET. IT MAY RESULT FROM MOON ROOF DRAIN HOSES ARE LOOSE OR DISCONNECTED FROM DRAIN PAN NIPPLE. *PE

RETAINER), A NEW SERVICE PART HAS BEEN DEVELOPED WHICH ALLOWS THE FLOOR CARPET GROMMET TO BE REPLACED SEPARATELY FROM THE CARPET ASSEMBLY. MODELS INCLUDE AVALON, CAMRY, CAMRY HV, PRIUS, TACOMA AND TUNDRA. *PE.

Please see T-SB-0009-26.

Please see T-SB-0057-18.

Please see T-SB-0080-19.

Since prior to that announcement, Toyota has been diligently making parts preparations for the parts replacement phase of this Program. Due to the age, volume, and breadth of the covered vehicles subject to the Program and the size and complexity of dashboard manufacturing, Toyota has launched the part replacement portion of this Program in several phases; please refer to the table below for part replacement model phasing.

Please see T-SB-0030-15.

heat or humidity.

Please see T-SB-0030-15.

heat or humidity.

SINCE PRIOR TO THAT ANNOUNCEMENT, TOYOTA HAS BEEN DILIGENTLY MAKING PARTS PREPARATIONS FOR THE PARTS REPLACEMENT PHASE OF THIS PROGRAM. DUE TO THE AGE, VOLUME, AND BREADTH OF THE COVERED VEHICLES SUBJECT TO THE PROGRAM AND THE SIZE AND COMPLEXITY OF DASHBOARD MANUFACTURING, TOYOTA HAS LAUNCHED THE PART REPLACEMENT PORTION OF THIS PROGRAM IN SEVERAL PHASES; PLEASE REFER TO THE TABLE BELOW FOR PART REPLACEMENT MODEL PHASING.

TOYOTA ALL MODEL YEARS. *MJ 2002 - 2007 MODEL YEARS. TOYOTA/SCION MODELS. *TT

This bulletin should be used in conjunction with the applicable model and model year Repair Manual while performing a rescue charge. The GRX-5100 should be used wherever the Repair Manual references the Toyota Hybrid System (THS) charger.

This bulletin should be used in conjunction with the applicable model and model year Repair Manual while performing a rescue charge. The GRX-5100 should be used wherever the Repair Manual references the Toyota Hybrid System (THS) charger

Camry Hybrid Vehicle; 2013 ? 2020 model year Avalon Hybrid Vehicle; 2016 ? 2020 model year Mirai and RAV4 Hybrid Vehicle; and 2020 model year Corolla Hybrid Vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P0A80/P1AC000 and/or P0A7F/P1A8000 stored due to dust or debris buildup in the HV battery cooling fan and/or HV cooling filter. Follow the procedure in this bulletin to address this condition.

Some cases have been identified with internal modification done to the HV Battery. Modified or altered parts are not covered under warranty.

Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE: There are new security provisions required to obtain a Reset Pass-Code. It is critical that the instructions for this new process are reviewed BEFORE attempting to get a Pass-Code in the new system.

damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.

damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.

Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE: There are new security provisions required to obtain a Reset Pass-Code. It is critical that the instructions for this new process are reviewed BEFORE attempting to get a Pass-Code in the new system.

SOME CASES HAVE BEEN IDENTIFIED WITH INTERNAL MODIFICATION DONE TO THE HV BATTERY. MODIFIED OR ALTERED PARTS ARE NOT COVERED UNDER WARRANTY.

FLASH CALIBRATION UPDATES FOR SPECIFIC VEHICLE MODELS/ECUS ARE RELEASED AS FIELD-FIX PROCEDURES DESCRIBED IN INDIVIDUAL SERVICE BULLETINS. THIS BULLETIN DETAILS THE TECHSTREAM ECU FLASH REPROGRAMMING PROCESS AND OUTLINES USE OF THE TECHNICAL INFORMATION SYSTEM (TIS) AND THE CALIBRATION UPDATE WIZARD (CUW). FLASH CALIBRATION UPDATES CAN ONLY BE APPLIED TO THE VEHICLE/ECU COMBINATION FOR WHICH THEY ARE INTENDED. ECUS HAVE INTERNAL SECURITY THAT WILL NOT ALLOW THEM TO BE PROGRAMMED WITH ANOTHER ECUS INFORMATION."

THIS BULLETIN SHOULD BE USED IN CONJUNCTION WITH THE REPAIR MANUAL WHILE PERFORMING RESCUE CHARGE. THE GRX-5100 SHOULD BE USED WHEREVER THE REPAIR MANUAL REFERENCES THE TOYOTA HYBRID SYSTEM (THS) CHARGER.

ORIENTATION MARK OF THE DRC.

DIAGNOSTIC TROUBLE CODE (DTC) P0A80 OR P0A7F. MODEL 2007-2011 CAMRY HV. *PE

*PE

FLASH REPROGRAMMING ALLOWS THE ECU SOFTWARE TO BE UPDATED WITHOUT REPLACING THE ECU. FLASH CALIBRATION UPDATES FOR SPECIFIC VEHICLE MODELS/ECUS ARE RELEASED AS FIELD-FIX PROCEDURES DESCRIBED IN INDIVIDUAL SERVICE BULLETINS. MODEL YEARS FROM 2001-2011. *PE

SOME MODEL YEAR TSUTSUMI BUILT VEHICLES MAY EXHIBIT A MIL ON CONDITION WITH DTC P0A84 (HYBRID BATTERY PACK COOLING FAN 1). IMPROVEMENTS HAVE BEEN MADE TO THE HV ECU SOFTWARE TO CORRECT THIS CONDITION. *PE UPDATED 8/28/12. *PE

*KB

The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.

The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.

This filter may become clogged, resulting in illumination of the Brake ( ) warning lamp due to low fluid level in one of the reservoir chambers. Under certain conditions this could cause additional warning lamps shown below to illuminate and front brake assist could be temporarily lost. Please note: In limited operating conditions, a warning buzzer may also sound. A new brake reservoir assembly has been designed to prevent this condition from occurring.

becomes cracked and/or has a shiny/degraded appearance. The pad surface may also become sticky or adherent. Follow the procedure in this bulletin to address this condition.

becomes cracked and/or has a shiny/degraded appearance. The pad surface may also become sticky or adherent. Follow the procedure in this bulletin to address this condition.

DUE TO SMALL INTERNAL BRAKE FLUID LEAKAGE, IN BRAKE ACTUATOR, THE ABS AND/OR TRAC WARNING LIGHT, FOR BRAKES, ARE ON AND CHECK VSC IS DISPLAYING A MESSAGE. MODEL 2007-2011 CAMRY. *LJ

DUE TO LOW FLUID LEVEL IN ONE OF RESERVOIR CHAMBERS, BRAKE WARNING LAMP WILL ILLUMINATE, FROM FILTER THAT IS CONNECTED BY TWO SEPARATE BRAKE RESERVOIR CHAMBERS, TO BECOME CLOGGED. MODEL 2007-2011 CAMRY HYBRID. *PE

DISPLAY A MESSAGE, DUE TO BRAKE FLUID LEAKING INSIDE BRAKE ACTUATOR. MODEL 2007-2011 CAMRY HV. *PE

DUE TO AN INTERNAL MALFUNCTION OF BRAKE ACTUATOR ASSEMBLY, THE BRAKE SYSTEM WARNING LIGHT WILL ILLUMINATE AND WARRANTY COVERAGE HAS BEEN EXTENDED. MODEL 2007-2011 CAMRY HYBRID. *PE

LIGHTS (ABS/VSC), WITH DIAGNOSTIC TROUBLE CODE (DTC) C1247). MODEL 2007-2011 CAMRY HV. *PE

In Mid-December, 2014, Toyota announced the reimbursement Phase of this warranty enhancement program. Since prior to that announcement, Toyota has been diligently making parts preparations for the parts replacement phase of this Program. Due to the age, volume, and breadth of the covered vehicles subject to the Program and the size and complexity of dashboard manufacturing, Toyota has launched the part replacement portion of this Program in several phases; please refer to the table below for part replacement model phasing.

In Mid-December, 2014 Toyota announced the reimbursement Phase of this warranty enhancement program. Since prior to that announcement, Toyota has been diligently making parts preparations for the parts replacement phase of this Program. Due to the age, volume, and breadth of the covered vehicles subject to the Program and the size and complexity of dashboard manufacturing, Toyota will be launching the part replacement portion of this Program in several phases; please refer to the table below for part replacement model phasing. Although Toyota is increasing production levels, it is difficult to predict customer demand and where parts need to be shipped to support customer demand. It is important that dealerships explain to customers that there still may be a period of time the customer will need to wait before part replacement can be performed. Please be sure to take this into consideration when performing customer scheduling.

cracked and/or sticky/melting dashboards as a result of heat or humidity.

Dealers will need to install the dowel pins between the short block and lower crankcase when performing this repair. A Tech Tip will be released in the near future to show this procedure, and TSB revision will be developed.

IN MID-DECEMBER, 2014 TOYOTA ANNOUNCED THE REIMBURSEMENT PHASE OF THIS WARRANTY ENHANCEMENT PROGRAM. SINCE PRIOR TO THAT ANNOUNCEMENT, TOYOTA HAS BEEN DILIGENTLY MAKING PARTS PREPARATIONS FOR THE PARTS REPLACEMENT PHASE OF THIS PROGRAM. DUE TO THE AGE, VOLUME, AND BREADTH OF THE COVERED VEHICLES SUBJECT TO THE PROGRAM AND THE SIZE AND COMPLEXITY OF DASHBOARD MANUFACTURING, TOYOTA WILL BE LAUNCHING THE PART REPLACEMENT PORTION OF THIS PROGRAM IN SEVERAL PHASES; PLEASE REFER TO THE TABLE BELOW FOR PART REPLACEMENT MODEL PHASING. ALTHOUGH TOYOTA IS INCREASING PRODUCTION LEVELS, IT IS DIFFICULT TO PREDICT CUSTOMER DEMAND AND WHERE PARTS NEED TO BE SHIPPED TO SUPPORT CUSTOMER DEMAND. IT IS IMPORTANT THAT DEALERSHIPS EXPLAIN TO CUSTOMERS THAT THERE STILL MAY BE A PERIOD OF TIME THE CUSTOMER WILL NEED TO WAIT BEFORE PART REPLACEMENT CAN BE PERFORMED. PLEASE BE SURE TO TAKE THIS INTO CONSIDERATION WHEN PERFORMING CUSTOMER SCHEDULING."

IN MID-DECEMBER, 2014, TOYOTA ANNOUNCED THE REIMBURSEMENT PHASE OF THIS WARRANTY ENHANCEMENT PROGRAM. SINCE PRIOR TO THAT ANNOUNCEMENT, TOYOTA HAS BEEN DILIGENTLY MAKING PARTS PREPARATIONS FOR THE PARTS REPLACEMENT PHASE OF THIS PROGRAM. DUE TO THE AGE, VOLUME, AND BREADTH OF THE COVERED VEHICLES SUBJECT TO THE PROGRAM AND THE SIZE AND COMPLEXITY OF DASHBOARD MANUFACTURING, TOYOTA HAS LAUNCHED THE PART REPLACEMENT PORTION OF THIS PROGRAM IN SEVERAL PHASES; PLEASE REFER TO THE TABLE BELOW FOR PART REPLACEMENT MODEL PHASING."

DEALERS WILL NEED TO INSTALL THE DOWEL PINS BETWEEN THE SHORT BLOCK AND LOWER CRANKCASE WHEN PERFORMING THIS REPAIR. A TECH TIP WILL BE RELEASED IN THE NEAR FUTURE TO SHOW THIS PROCEDURE, AND TSB REVISION WILL BE DEVELOPED.

rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

T-SB-0033-14. ? Applicability has been updated to include 2019 model year Toyota vehicles. Service Bulletin No. T-SB-0033-14 is obsolete and any printed versions should be discarded. Some 2006 ? 2019 model year Toyota vehicles in particular geographic areas may exhibit a condition where the HVAC evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part. NOTE The ARINIX Tip is NOT registered or labeled for sale or use outside the United States or Puerto Rico.

The warranty system has been modified to accept this additional required part.

The warranty system has been modified to accept this additional required part.

SOME VEHICLES MAY EXHIBIT A MIL ON CONDITION WITH DIAGNOSTIC TROUBLE CODE (DTC) P1423, OR A FUEL CAP BINDING UPON INSTALLATION OR REMOVAL. *PE UPDATED 5/16/11. *PE

All previous versions of this document should be discarded. Please review this guide along with the previously provided FAQ to respond to customer inquiries. Laminated hard copies of the updated guide will be sent to your dealership service manager in the near future.

All previous versions of this document should be discarded. Please review this guide along with the previously provided FAQ to respond to customer inquiries. Laminated hard copies of the updated guide will be sent to your dealership service manager in the near future.

All previous versions of this document should be discarded. Please review this guide along with the previously provided FAQ to respond to customer inquiries. Laminated hard copies of the updated guide will be sent to your dealership service manager in the near future.

All previous versions of this document should be discarded. Please review this guide along with the previously provided FAQ to respond to customer inquiries. Laminated hard copies of the updated guide will be sent to your dealership service manager in the near future.

All previous versions of this document should be discarded. Please review this guide along with the previously provided FAQ to respond to customer inquiries. Laminated hard copies of the updated guide will be sent to your dealership service manager in the near future.

All previous versions of this document should be discarded. Please review this guide along with the previously provided FAQ to respond to customer inquiries. Laminated hard copies of the updated guide will be sent to your dealership service manager in the near future.

?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.

? Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.

? Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.

* Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. * Various Bluetooth Audio functions are no longer functioning with customer's phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer's phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.

STEERING WHEEL FLUTTER AND/OR A BODY VIBRATION (FLOOR OR SEATS) AT HIGHWAY SPEEDS (APPROX. 65-75 MPH [105-121 KM/H]). *PE

*KB

Conditions typically experienced include inability to pair the iPhone to the system, poor sound quality during phone calls placed through the audio/navigation system, and the inability to place a hands free phone call using the audio/navigation system.

Conditions typically experienced include inability to pair the iPhone to the system, poor sound quality during phone calls placed through the audio/navigation system, and the inability to place a hands free phone call using the audio/navigation system.

Conditions typically experienced include inability to pair the iPhone to the system, poor sound quality during phone calls placed through the audio/navigation system, and the inability to place a hands free phone call using the audio/navigation system.

Conditions typically experienced include inability to pair the iPhone to the system, poor sound quality during phone calls placed through the audio/navigation system, and the inability to place a hands free phone call using the audio/navigation system.

THE CUSTOMER'S IPHONE IS CONNECTED TO THE VEHICLE VIA BLUETOOTH. THE CUSTOMER MAY COMPLAIN OF THE FOLLOWING ISSUES: WHEN RECEIVING TWO INCOMING CALLS SIMULTANEOUSLY, BOTH CALLS ARE ENDED AUTOMATICALLY. ITUNES RADIO APP DOES NOT PLAY VIA BLUETOOTH AUDIO. PODCAST AND AUDIOBOOK MEDIA PLAYBACK IS INOPERATIVE VIA BLUETOOTH AUDIO.

sticky/melting dashboards as a result of heat or humidity.

MODELS 2003-05 4RUNNER, 2005-10 AVALON, 2007-11 CAMRY & HYBRID, 2004-10 SIENNA, 2004-08 SOLARA. *PE

MY RUNNER, AVALON, CAMRY& HYBRID, SIENNA, SOLARA. *LJ

IN SOME VEHICLES, THE SUN VISORS WOULD SLOWLY ROTATE DOWNWARD AND SOME TIMES WOULD BECOME DETACHED. MODELS 2007-11 CAMRY & CAMRY HYBRIDS. *PE

Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.

Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.

Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.

Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.

*PE

DRIVE, AND OTHER ACCESSORIES BECOMING INOPERATIVE AFTER THE VEHICLE HAS COLD SOAKED IN SUB FREEZING (BELOW 14 F[-10 C]) AMBIENT AIR TEMPERATURES. A NEW RELAY AND WIRE HARNESS HAVE BEEN MADE AVAILABLE TO IMPROVE THIS CONDITION. *PE

*PE

This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.