2025 Tesla Cybertruck TSBs
6 Technical Service Bulletins across 6 categories
Suspension
1 bulletinOn certain Cybertruck vehicles, the halfshaft bolts may lose torque, which may cause a loud grinding noise if the hub...
Read full bulletin
and axle facespline teeth become unseated and damaged. Replace all 4 halfshaft bolts and run a Double Pedal Torque Test to confirm the hub and halfshaft facespline teeth are properly seated.
Electrical
1 bulletinOn certain Cybertruck vehicles, the AC junction box to fast charge contactor HV harness might have a poor crimp...
Read full bulletin
connection, which may cause increased resistance and localized heating in the harness. If the ancillary cover is removed for other procedures, replace the AC junction box to fast charge contactor HV harness with version -J or later.
Body & Paint
1 bulletinOn some Cybertruck vehicles, the adhesive in top edge and/or center reinforcement bracket of the tailgate might...
Read full bulletin
delaminate, which may cause noise, vibration, and harshness (NVH). Inspect the vehicle for symptoms related to the condition. If symptoms are present, rework or replace the tailgate assembly.
Brakes
1 bulletinOn some Cybertruck vehicles, reinforcement brackets inside the front and rear door assemblies might cause low frequency...
Read full bulletin
shaking, rattling, and/or vibrations at the door assemblies and/or LH side mirror when the vehicle is driven at high speeds, which does not meet Tesla quality standards. Upon customer complaint, inspect the vehicle for symptoms related to the condition. If symptoms are present, apply new adhesive to the reinforcement brackets and install additional butyl pads on the affected door assemblies.
Fuel System
1 bulletinOn certain Cybertruck vehicles, the Vehicle Emission Control Information label was printed with text that is illegible.
Other
1 bulletinOn some Cybertruck vehicles, when the tonneau cover is closed, the tonneau slat water management channel is exposed,...
Read full bulletin
which under certain environmental conditions, may cause excessive water to enter the cargo bed.