2013 Subaru Impreza TSBs

The updated valve body incorporates an enhanced valve sleeve to improve durability.

The updated valve body incorporates an enhanced valve sleeve to improve durability.

engines.

on FA and FB type engines.

has determined that a defect, which relates to motor vehicle safety, exists in certain 2003-2014 model year Legacy and Outback vehicles, 2003-2006 model year Baja vehicles, 2009-2013 model year Forester vehicles, 2004-2011 model year Impreza vehicles, and 2004- 2014 WRX (including STI) vehicles equipped with a non-desiccated Takata-sourced passenger-side frontal air bag containing the propellant Phase Stabilized Ammonium Nitrate (PSAN).

from the timing chain cover, front camshaft cap, camshaft carrier and / or upper oil pan.

Transmitter Fobs

from the timing chain cover, front camshaft cap, camshaft carrier and / or upper oil pan.

type engines.

(Subaru) is recalling 100,127 vehicles including certain 2007-2009 model year Legacy and Outback (turbo models only), 2008-2014 model year Impreza (turbo models only) and 2009-2013 model year Forester (turbo models only) vehicles to replace the secondary air pump relay.

is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicles to 8 years / 100,000 miles from the original warranty start date.

is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicles to 8 years / 100,000 miles from the original warranty start date.

is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicles to 8 years / 100,000 miles from the original warranty start date.

below.

from the timing chain cover, front camshaft cap, camshaft carrier, and/or upper oil pan.

from the front camshaft cap, upper oil pan, and/or the timing chain cover.

-related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with this new information in the near future.

(Subaru) is recalling certain 2013 model year BRZ and XV Crosstrek and 2012-2014 model year Impreza vehicles to replace the engine valve springs which may fracture. A total of 139,324 U.S. vehicles will be affected by this recall.

the valve spring replacement (installer) tools used to perform the WTY-84 recall.

of the blower motor becoming inoperative. If this issues occurs on models with Auto A/C, the blower fan may become totally inoperative. If this issue occurs on models with Manual A/C, the blower fan may operate on high speed only. The root cause of these conditions is water intrusion into the blower motor causing rust and corrosion to develop. Over time, the blower motor may begin to draw more electrical current to operate. if that occurs, the additional draw can cause the related fuse and/ or blower resistor to fail. To address this condition, additional packing has been added to improve sealing of the blower unit case along with development of a new style cabin air filter which also in corporates improved sealing.

from the timing chain cover, front camshaft cap, camshaft carrier and / or upper oil pan. There are five areas that should be closely inspected if an oil leak is reported by the customer: 1. The 6mm tapped hole casting boss area in the left-hand camshaft cap 2. The sealing surfaces between either the left or right-hand camshaft cap and camshaft carrier 3. The sealing surfaces between the cylinder head and camshaft carrier 4. The sealing surface between the upper oil pan and the engine block 5. The sealing surfaces of the front timing chain cover

-related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with this new information in the near future.

(Subaru) is recalling certain 2013 model year BRZ and XV Crosstrek and 2012-2014 model year Impreza vehicles to replace the engine valve springs which may fracture. A total of 139,324 U.S. vehicles will be affected by this recall.

-related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with this new information in the near future.

which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness connector portion of the valve. If oil seeps into the connector, over time, the Check Engine lamp may illuminate and set various AVCS-related DTCs.

(Subaru) is recalling certain 2013 model year BRZ and XV Crosstrek and 2012-2014 model year Impreza vehicles to replace the engine valve springs which may fracture. A total of 139,324 U.S. vehicles will be affected by this recall.

(Subaru) is recalling certain 2013 model year BRZ and XV Crosstrek and 2012-2014 model year Impreza vehicles to replace the engine valve springs which may fracture. A total of 139,324 U.S. vehicles will be affected by this recall.

The new springs have different color paint marks to help identify their application.

prevent false detection of DTC P0841 and / or illumination of the AT Temp light. Testing has revealed in some limited cases, air bubbles (aerated fluid) may enter certain pressure circuits within the control valve assembly causing fluid pressure control and adjustment to be calculated incorrectly resulting in DTC P0841. The shape of these circuits has been changed to prevent this occurrence.

(Subaru) is recalling certain 2013 model year BRZ and XV Crosstrek and 2012-2014 model year Impreza vehicles to replace the engine valve springs which may fracture. A total of 139,324 U.S. vehicles will be affected by this recall.

assembly line efficiency and increase durability. In some cases, the Check Engine light may illuminate and a knock sensor-related DTC set in the ECM memory: P0327, P0328, P0332 and P0333. The knock sensor for DIT engines is now utilized for NA engines to improve durability and resistance to heat.

either inoperative or only operates on high speed. ? Excessive rotational-type sound heard when the fan is operating.

Return Policy (See Parts Policy & Procedures Manual ? Section 12.3 Core Returns ? Reman) and provide suggestions for removal and handling of the short block.

is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oilconsumption on applicable vehicles to 8 years / 100,000 miles from the original warranty start date.This Warranty Extension will not cover any excessive engine oil consumption found to be a result ofany condition(s) other than those specifically described in this bulletin.This condition must be verified during an inspection and when determined necessary, an oil consumption test performed by an authorized Subaru retailer. SOA will inform vehicle owners this condition may exist via a customer letter.

assembly to determine whether or not replacement is necessary. Read through and understand this information completely before proceeding with any repairs to the cylinder block. All Models with FA and FB Engines, 2011MY and Later.

for engine oil level detection in the event of false or premature low engine oil level warning lamp illumination. Revised to add models.

Recently SOA has become aware of some retailer questions regarding the VIN breakpoint information supplied as part of the class action notice.

is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicles to 8 years / 100,000 miles from the original warranty start date.

is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicles to 8 years / 100,000 miles from the original warranty start date.

?AVCS Slow Response? or ?AVCS System Failure? DTCs listed above are found to be stored in the ECM memory. A possible cause of these conditions is contamination within the camshaft sprocket and / or oil control solenoid valve (OCV) mechanism.

2.0L NA CVT, 2014-15 Crosstrek Hybrid CVT 2014-15 Forester 2.5L NA CVT 2014-15 Forester 2.0L Turbo CVT 2015 WRX 2.0L Turbo models only. In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model years from the original five (5) years or sixty thousand (60,000) miles (whichever comes first) to ten (10) years or one-hundred thousand (100,000) miles (whichever comes first). This change is not in response to any specific condition, rather it is to provide customers with added assurance regarding the function and overall performance of their CVT. Additionally, vehicles which are more than ten (10) years old or beyond one-hundred thousand (100,000) miles at the time customer notification letters are mailed are being offered additional coverage for a period of one-year from the date of the customer notification letters. For these vehicles, retailers must contact Subaru Claims Helpline prior to claims submission at 1-866-SUBARU2 (1-866-782-2782)

customer concerns of the green Hill Holder light blinking and cancel warning alarm sounding during cranking / starting the engine

Forester (Manual Transmissions Only), with 2.5L FB Engines, 2012-13 MY Impreza and XV Crosstrek Models with 2.0 FB Engines, 2014-15 MY Impreza and XV Crosstrek Models (Manual Transmissions Only) with 2.0 FB Engine As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicles to 8 years / 100,000 miles from the original warranty start date. This Warranty Extension will not cover any excessive engine oil consumption found to be a result of any condition(s) other than those specifically described in this bulletin

which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness connector portion of the valve. If oil seeps into the connector, over time, the Check Engine lamp may illuminate and set various AVCS-related DTCs.

As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicles to 8 years / 100,000 miles from the original warranty start date. This Warranty Extension will not cover any excessive engine oil consumption found to be a result of any condition(s) other than those specifically described in this bulletin. This condition must be verified during an inspection and when determined necessary, an oil consumption test performed by an authorized Subaru retailer. SOA will inform vehicle owners this condition may exist via a customer letter. For vehicles within the coverage guidelines listed in this bulletin, customers can schedule an inspection appointment with an authorized Subaru retailer. IMPORTANT: ALWAYS perform a Vehicle Coverage Inquiry on Subarunet to determine eligibility for this Warranty Extension before proceeding. The VIN should also be checked for any open campaigns or recalls at this time.

Forester (Manual Transmissions Only) with 2.5L FB Engines - 2012-13 MY Impreza and XV Crosstrek Models with 2.0 FB Engines - 2014-15 MY Impreza and XV Crosstrek Models (Manual Transmissions Only) with 2.0 FB Engines. As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicles to 8 years / 100,000 miles from the original warranty start date. This Warranty Extension will not cover any excessive engine oil consumption found to be a result of any condition(s) other than those specifically described in this bulletin. This condition must be verified during an inspection and when determined necessary, an oil consumption test performed by an authorized Subaru retailer. SOA will inform vehicle owners this condition may exist via a customer letter. For vehicles within the coverage guidelines listed in this bulletin, customers can schedule an inspection appointment with an authorized Subaru retailer.

regarding a major change to the repair procedures previously outlined in Service Bulletins 02-143-13R, 02-144-13R and 02-145-13R.

customer concerns of a slipping belt (squeal or chirping) sound.

There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become displaced resulting in engine oil seepage. Revisions made to the upper oil pan casting: * The mating flange thickness of the casting in the area identified as the cause for the seepage has been increased by 5.5mm. (See images provided in the Parts Information section below.) This thickness increase creates the need for a longer bolt to provide proper tightening and retention. * An additional mounting point has been added to the ribbing inside the casting to increase retention of the steel baffle plate and eliminate vibration.

There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become displaced resulting in engine oil seepage.

BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PISTON RINGS TO ADDRESS VERIFIED CONCERNS OF UNUSUAL ENGINE OIL CONSUMPTION. VEHICLES CONFIRMED AS HAVING THIS CONDITION WHICH ARE WITHIN THE SUPPLIED VIN RANGES WILL NO LONGER BE REPAIRED WITH PISTON RING REPLACEMENT. THE REVISED REPAIR PROCEDURE TO ADDRESS VERIFIED UNUSUAL OIL CONSUMPTION CONCERNS ON THESE SPECIFIC VEHICLES WILL CONSIST OF REPLACING THE ENGINE SHORT BLOCK ASSEMBLY.

BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PISTON RINGS TO ADDRESS VERIFIED CONCERNS OF UNUSUAL ENGINE OIL CONSUMPTION. VEHICLES CONFIRMED AS HAVING THIS CONDITION WHICH ARE WITHIN THE SUPPLIED VIN RANGES WILL NO LONGER BE REPAIRED WITH PISTON RING REPLACEMENT. THE REVISED REPAIR PROCEDURE TO ADDRESS VERIFIED UNUSUAL OIL CONSUMPTION CONCERNS ON THESE SPECIFIC VEHICLES WILL CONSIST OF REPLACING THE ENGINE SHORT BLOCK ASSEMBLY.

BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PISTON RINGS TO ADDRESS VERIFIED CONCERNS OF UNUSUAL ENGINE OIL CONSUMPTION. VEHICLES CONFIRMED AS HAVING THIS CONDITION WHICH ARE WITHIN THE SUPPLIED VIN RANGES WILL NO LONGER BE REPAIRED WITH PISTON RING REPLACEMENT. THE REVISED REPAIR PROCEDURE TO ADDRESS VERIFIED UNUSUAL OIL CONSUMPTION CONCERNS ON THESE SPECIFIC VEHICLES WILL CONSIST OF REPLACING THE ENGINE SHORT BLOCK ASSEMBLY.

(MODEL TR580) WHEN SHIFTING INTO REVERSE OR DRIVE FROM NEUTRAL. ALL 2013-16MY, 4-CYLINDER, N/A MODELS WITH CVT

P0346

IN THESE RARE CASES, AFTER AN EXTENDED COLD SOAK, COOLANT MAY ENTER THE THERMOSTATS INTERNAL PISTON. IF THIS OCCURS, THE THERMOSTAT MAY OPEN AT A TEMPERATURE WHICH IS LOWER THAN SPECIFIED AND CAUSE DTC P0128 TO BE STORED IN THE ECM MEMORY."

THE CHANGE WAS MADE AS A RESULT OF SOME LIMITED FINDINGS OF UNANTICIPATED WEAR OF THESE RINGS. OIL CONSUMPTION WILL BE HIGHER THAN NORMAL AND CONSISTENT, IF THIS WEAR OCCURS, THE CONDITION REMAINS UNTIL REPAIR. UNUSUAL SWINGS OR VARIATIONS IN OIL CONSUMPTION ARE NOT CONSISTENT WITH THIS CONDITION AND MAY BE THE RESULT OF VEHICLE USAGE RATHER THAN THE CONDITION DESCRIBED HERE. ADDITIONAL INFORMATION IS SUPPLIED IN THIS BULLETIN TO ASSIST IN THE ASSESSMENT AND DETERMINATION IF VEHICLE USAGE IS A REASON FOR THIS VARIED OIL CONSUMPTION. "

MAY BE HEARD COMING FROM THE LEFT-HAND (B2) SIDE OF THE ENGINE WHEN THE ENGINE IS WARM. THIS BULLETIN DOES NOT ADDRESS ANY COLD ENGINE OR START-UP SOUNDS. THE CHANGES CONSIST OF: DESIGN CHANGE TO THE VALVE ROCKERS CAMSHAFT PROFILE CHANGE INCREASED INTAKE VALVE STEM LENGTH (1.65MM LONGER INTAKE, 2.4MM LONGER EXHAUST) IN ADDITION, THE INSULATOR PAD HAS BEEN ELIMINATED FROM THE B2 INTAKE MANIFOLD PROTECTOR."

DYNAMICS CONTROL AND HYDRAULIC CONTROL UNIT (VDCCM&HCU). THE DTC RELATES TO INCORRECT INPUTS TO WHEEL CYLINDER PRESSURE SENSORS DUE TO AIR IN THE HYDRAULIC BRAKE LINES. IN ADDITION, ON IMPREZA AND XV CROSSTREK, AN IMPROPERLY ADJUSTED BRAKE LIGHT SWITCH (BLS) MAY ALSO CAUSE THE DTC."

BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PISTON RINGS TO ADDRESS VERIFIED CONCERNS OF UNUSUAL ENGINE OIL CONSUMPTION. VEHICLES CONFIRMED AS HAVING THIS CONDITION WHICH ARE WITHIN THE SUPPLIED VIN RANGES WILL NO LONGER BE REPAIRED WITH PISTON RING REPLACEMENT. THE REVISED REPAIR PROCEDURE TO ADDRESS VERIFIED UNUSUAL OIL CONSUMPTION CONCERNS ON THESE SPECIFIC VEHICLES WILL CONSIST OF REPLACING THE ENGINE SHORT BLOCK ASSEMBLY."

WHENEVER REPLACEMENT OF EITHER OF THESE COMPONENTS IS REQUIRED, THE IDENTIFICATION PROCEDURE PROVIDED BELOW MUST BE FOLLOWED TO INSURE THE PROPER PARTS ARE ORDERED AND INSTALLED AS A SET.

EXTENDED CRANKING TIME BEFORE THE ENGINE STARTS.

BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PISTON RINGS TO ADDRESS VERIFIED CONCERNS OF UNUSUAL ENGINE OIL CONSUMPTION. VEHICLES CONFIRMED AS HAVING THIS CONDITION WHICH ARE WITHIN THE SUPPLIED VIN RANGES WILL NO LONGER BE REPAIRED WITH PISTON RING REPLACEMENT. THE REVISED REPAIR PROCEDURE TO ADDRESS VERIFIED UNUSUAL OIL CONSUMPTION CONCERNS ON THESE SPECIFIC VEHICLES WILL CONSIST OF REPLACING THE ENGINE SHORT BLOCK ASSEMBLY."

FOR ENGINE OIL LEVEL DETECTION IN THE EVENT OF FALSE OR PREMATURE LOW ENGINE OIL LEVEL WARNING LAMP ILLUMINATION. REVISED TO INCREASE ENGINE OIL QUANTITIES.

BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PISTON RINGS TO ADDRESS VERIFIED CONCERNS OF UNUSUAL ENGINE OIL CONSUMPTION. THE PURPOSE OF REVISING THIS BULLETIN IS TO CORRECT THE TRANSMISSION TYPE.

MISFIRE DTCS FOR THE FA AND FB ENGINE-EQUIPPED MODELS LISTED ABOVE. THE CAMSHAFT POSITION SENSOR (CPS) CLEARANCE MAY BE OUT OF SPECIFICATION CAUSING THESE CONDITION(S) AND ONE OR MORE OF THE DTCS LISTED ABOVE TO SET. IN ADDITION TO A CHECK ENGINE LIGHT COMING ON, THERE MAY OR MAY NOT BE CUSTOMER CONCERNS OF ROUGH IDLE, EXTENDED CRANKING OR NO START.

UNANTICIPATED WEAR OF THESE RINGS.

P0301, P0302, P0303 OR P0304 - THIS BULLETIN PROVIDES INSPECTION AND REPAIR PROCEDURES FOR INTAKE AND EXHAUST CAMSHAFT POSITION-RELATED AND/OR ENGINE MISFIRE DTCS FOR THE FA AND FB ENGINE-EQUIPPED MODELS LISTED ABOVE."

MISFIRE DTCS FOR THE FA AND FB ENGINE-EQUIPPED MODELS LISTED ABOVE. THE CAMSHAFT POSITION SENSOR (CPS) CLEARANCE MAY BE OUT OF SPECIFICATION CAUSING THESE CONDITION(S) AND ONE OR MORE OF THE DTCS LISTED ABOVE TO SET. IN ADDITION TO A CHECK ENGINE LIGHT COMING ON, THERE MAY OR MAY NOT BE CUSTOMER CONCERNS OF ROUGH IDLE, EXTENDED CRANKING OR NO START.

UNANTICIPATED WEAR OF THESE RINGS.

MISFIRE DTCS FOR THE FA AND FB ENGINE-EQUIPPED MODELS LISTED ABOVE. THE CAMSHAFT POSITION SENSOR (CPS) CLEARANCE MAY BE OUT OF SPECIFICATION CAUSING THESE CONDITION(S) AND ONE OR MORE OF THE DTCS LISTED ABOVE TO SET. IN ADDITION TO A CHECK ENGINE LIGHT COMING ON, THERE MAY OR MAY NOT BE CUSTOMER CONCERNS OF ROUGH IDLE, EXTENDED CRANKING OR NO START.

ARTICLES REGARDING SUBARU OF AMERICA, INC. REACHING A PROPOSED SETTLEMENT IN A CLASS ACTION LAWSUIT FOR ALLEGED OIL CONSUMPTION CONCERNS ON CERTAIN SUBARU VEHICLES. SOME MEDIA OUTLETS ALSO SUPPLIED VARYING INFORMATION ON THE CONTENTS OF THIS SETTLEMENT. THE FOLLOWING INFORMATION IS BEING PROVIDED TO YOU, OUR RETAILERS, IN ADVANCE OF ANY CUSTOMER NOTIFICATION."

AVCS SLOW RESPONSE OR AVCS SYSTEM FAILURE DTCS LISTED ABOVE ARE FOUND TO BE STORED IN THE ECM MEMORY. A POSSIBLE CAUSE OF THESE CONDITIONS IS CONTAMINATION WITHIN THE CAMSHAFT SPROCKET AND / OR OIL CONTROL SOLENOID VALVE (OCV) MECHANISM.

BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PISTON RINGS TO ADDRESS VERIFIED CONCERNS OF UNUSUAL ENGINE OIL CONSUMPTION. THE PURPOSE OF REVISING THIS BULLETIN IS TO CORRECT THE TRANSMISSION TYPE.

FROM THE FRONT CAMSHAFT CAP, UPPER OIL PAN AND /OR THE TIMING CHAIN COVER.

BE HEARD COMING FROM THE LEFT-HAND (B2) SIDE OF THE ENGINE WHEN THE ENGINE IS WARM.

HAS DETERMINED THAT A DEFECT, WHICH RELATES TO MOTOR VEHICLE SAFETY, EXISTS ON CERTAIN SUBARU VEHICLES EQUIPPED WITH OPTIONAL GENUINE SUBARU REMOTE ENGINE STARTER (RES). TRANSMITTER FOBS MAY CONTAIN A DEFECT THAT COULD ADVERSELY AFFECT THE OPERATION OF THE RES RESULTING IN A POTENTIAL SAFETY HAZARD.

SUBARU OF AMERICA, INC. HAS DETERMINED THAT A DEFECT, WHICH RELATES TO MOTOR VEHICLE SAFETY, EXISTS ON CERTAIN SUBARU VEHICLES EQUIPPED WITH OPTIONAL GENUINE SUBARU REMOTE ENGINE STARTER (RES). TRANSMITTER FOBS MAY CONTAIN A DEFECT THAT COULD ADVERSELY AFFECT THE OPERATION OF THE RES RESULTING IN A POTENTIAL SAFETY HAZARD.

WE ARE ASKING THAT DEALERS PLEASE CHECK THEIR INVENTORY AND IDENTIFY ANY BAD LOTS (LISTED BELOW) AND RETURN THEM TO THEIR FACING WAREHOUSE. ALL OF THE RDCS HAVE SORTED AND REMOVED ANY INVENTORY THAT MAY BE AFFECTED.

REGARDING A MAJOR CHANGE TO THE REPAIR PROCEDURES PREVIOUSLY OUTLINED IN SERVICE BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R.

REGARDING A MAJOR CHANGE TO THE REPAIR PROCEDURES PREVIOUSLY OUTLINED IN SERVICE BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R.

INFORMATION ANNOUNCING AVAILABILITY OF A REVISED REPLACEMENT AIR INTAKE DUCT FOR THE TURBOCHARGED VEHICLES LISTED. *LJ

SEPARATES FROM DUCT AND LEAKS BOOST PRESSURE, LOSS OF POWER AND INCREASED SOUND LEVELS OCCURS. MODEL 2005-12 LEGACY, OUTBACK TURBO, 2009-13 FORESTER TURBO, 2008-14 IMPREZA WRX. *PE

AND HIGHER OIL CONSUMPTION AND CONSISTENT IF WEAR OCCURS. MODEL 2012-2013 IMPREZA, CROSSTREK. *PE

THIS BULLETIN CONTAINS THE INSPECTION AND REPAIR. *JS UPDATED 11/18/14. *PE

CAMSHAFT POSITION SENSOR CLEARANCE COULD BE OUT OF SPECIFICATION, WHICH IS CAUSING ONE OR MORE OF DTCS CONDITIONS TO SET AND THE CHECK ENGINE LIGHT TO COME ON. MODELS 2012-2013 IMPREZA, XV CROSSTREK. *PE

proper exchange procedure.

202 and / or 204 may occur preventing the process from completing successfully.

the operation of their Gen 2/Gen 3 Telematics system equipped Subaru.

proper exchange procedure.

vehicle's production.

Subaru Lock Information web-site.

retailers of the SOA321152 and SOA321153 Terminal Test Kits.

preventing the process from completing successfully.

impacts the way some vehicles with accessories are sold. This regulation applies to any automobile retailer installing accessories on a vehicle prior to its first sale.

proper exchange procedure.

proper exchange procedure for 2025MY vehicles.

Subaru Lock Information web-site.

Subaru Lock Information web-site.

proper exchange procedure.

track assembliesd.

corner of the rear gate area on the models listed.

track assemblies used on the models listed.

Subaru Lock Information web-site.

Subaru Lock Information web-site.

OR PASSENGER FRONT SEAT BACK.

MESH GRILLES."

THE PURPOSE OF REVISING THIS BULLETIN WAS TO CORRECT THE TRIBECA REAR SEAT DVD UNIT PART NUMBERS.

THE SEAT CUSHION AND BACKREST MADE WITH A REVISED FABRIC MATERIAL WHICH WILL PROVIDE INCREASED DURABILITY AND PREVENT PILLING OR FUZZING OF THE SIDE BOLSTER

(Immobilizer Key Collation Diagnosis).

center.

models.

February.

models.

models.

models.

models.

Technical Information System (STIS) web site.

Information System (STIS) web site.

models

(SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.

Technical Information System (STIS) web site.

Technical Information System (STIS) web site.

Technical Information System (STIS) web site.

the models listed.

(SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.

Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for becoming aware of the latest changes. We advise you to always refer to the STIS web site when looking for the latest Service information

Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for becoming aware of the latest changes.

The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Service Policies and Procedures Manual found in subarunet.

to increase durability

MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE.

BUT DO NOT HAVE THE ORIGINAL MATS THAT WERE IN THE VEHICLE AT THE TIME OF SALE. IN MOST CASES, THE CUSTOMERS HAVE STATED THAT THEY HAVE DISCARDED OR DESTROYED THE MATS. IN OTHER INSTANCES, THE CUSTOMERS INDICATED THAT THEIR VEHICLE DID NOT HAVE THE MATS WHEN THEY PURCHASED THE VEHICLE. IF, OR WHEN, THIS SITUATION ARISES, PLEASE FILL OUT THE ATTACHED FORM AND HAVE THE CUSTOMER SIGN IT AND RETAIN THE SIGNED FORM WITH THE REPAIR ORDER. IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT THE CLAIMS HELPLINE AT 866-782-2782."

THE EXCHANGE PROGRAM POLICY CAN ALSO BE FOUND IN SECTIONS 8.4.9 AND 11.2.10 OF YOUR SERVICE POLICIES AND PROCEDURES MANUAL FOUND IN SUBARUNET.

TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE.

THE EXCHANGE PROGRAM POLICY CAN ALSO BE FOUND IN SECTIONS 8.4.9 AND 11.2.10 OF YOUR SERVICE POLICIES AND PROCEDURES MANUAL FOUND IN SUBARUNET. 2013MY SUBARU VEHICLES

from the CVT assembly.

available.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park.

high-pitched sound coming from the transmission extension housing area.

certain CVT solenoid related DTCs as listed.

not being able to remove the key from the ignition switch when the vehicle is in Park.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park.

(SOA) is announcing an extension to the Basic New Car Limited Warranty for the CVT Parking Switch for certain 2015-2018 MY Legacy, Outback, 2012-2018 MY Impreza, 2013-2018 MY Crosstrek, 2015-2018 MY WRX and 2014-2018MY Forester vehicles.

extension to the Basic New Car Limited Warranty for your vehicles CVT Parking Brake Switch.

from the CVT assembly.

(SOA) is announcingan extension to the Basic New Car Limited Warranty for the Electronic Power Steering (EPS) GearBox Assembly for certain 2012-2018 MY vehicles.

Basic New Car Limited Warranty for your vehicles Electronic Power Steering Gear Box Assembly.

(SOA) is announcing an extension to the Basic New Car Limited Warranty for the Electronic Power Steering Gear Box Assembly for certain 2012-2018 MY vehicles.

(SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model years from the original five (5) years or sixty thousand (60,000) miles (whichever comes first) to ten (10) years or one-hundred thousand (100,000) miles (whichever comes first).

from the CVT assembly.

related DTCs.

Investigation has identified likely sources of the seepage to be the sealant used on the CVTs oil pump chain cover and the input shaft oil seal. The repair involves chain cover removal, a thorough cleaning and inspection of the sealing surfaces followed by re-sealing the cover and replacement of the input shaft oil seal with the new, redesigned type.

Investigation has identified likely sources of the seepage to be the sealant used on the CVTs oil pump chain cover and the input shaft oil seal. The repair involves chain cover removal, a thorough cleaning and inspection of the sealing surfaces followed by re-sealing the cover and replacement of the input shaft oil seal with the new, redesigned type"

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contamination of the Park-Range switch internal components.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contamination of the Park-Range switch internal components.

During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases where the operator keeps a foot on the clutch pedal for extended periods, an increased amount of heat is generated which can cause the grease inside the bearing to deteriorate. In a case of prolonged clutch pedal application, seizure of the bearing can occur with potential damage to other related components.

During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases where the operator keeps a foot on the clutch pedal for extended periods, an increased amount of heat is generated which can cause the grease inside the bearing to deteriorate. In a case of prolonged clutch pedal application, seizure of the bearing can occur with potential damage to other related components.

VERY limited number of customer concerns regarding uneven steering effort felt when turning left or right. In areas where high concentrations of road salt are used to melt ice and snow, corrosion may develop and cause a portion of the gear box housing to crack if the vehicle were to suffer a large enough impact from hitting a pothole or similar type of road hazard.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contamination of the Park-Range switch internal components.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contamination of the Park-Range switch internal components

(SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model years from the original five (5) years or sixty thousand (60,000) miles (whichever comes first) to ten (10) years or one-hundred thousand (100,000) miles (whichever comes first). This change is not in response to any specific condition, rather it is to provide customers with added assurance regarding the function and overall performance of their CVT. Additionally, vehicles which are more than ten (10) years old or beyond one-hundred thousand (100,000) miles at the time customer notification letters are mailed are being offered additional coverage for a period of one-year from the date of the customer notification letters.

(SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model years from the original five (5) years or sixty thousand (60,000) miles (whichever comes first) to ten (10) years or one-hundred thousand (100,000) miles (whichever comes first). This change is not in response to any specific condition, rather it is to provide customers with added assurance regarding the function and overall performance of their CVT. Additionally, vehicles which are more than ten (10) years old or beyond one-hundred thousand (100,000) miles at the time customer notification letters are mailed are being offered additional coverage for a period of one-year from the date of the customer notification letters. A copy of the customer letter is attached to this bulletin as reference.

This Service Information bulletin provides a new flow chart and additional diagnostic tools to assist Technicians with troubleshooting DTC P0841- SECONDARY OIL PRESSURE SENSOR PERFORMANCE.

HAS EXTENDED THE AVAILABILITY OF REMANUFACTURED CVT TRANSMISSIONS TO INCLUDE CROSSTREK, FORESTER AND IMPREZA APPLICATIONS. PLEASE CHECK APPLICATIONS AND AVAILABILITY THROUGH NORMAL PARTS CHANNELS PRIOR TO MAKING VEHICLE REPAIRS. RETAILERS ARE REQUIRED TO USE A REMANUFACTURED UNIT FOR ALL REPAIRS REIMBURSED BY SUBARU THAT REQUIRE A MAJOR REPAIR OR REPLACEMENT, EXCEPT IN THE CASE OF A NEW AND IN-STOCK VEHICLE.

BULLETIN PROVIDES PRODUCTION CHANGE, REPAIR PROCEDURE AND PARTS INFORMATION TO ADDRESS A CUSTOMER CONCERN OF A HIGH-PITCHED SOUND COMING FROM THE TRANSMISSION EXTENSION HOUSING AREA.

exposure to pollen on painted surfaces on vehicles imported from Japan. This bulletin does not apply to SIA built vehicles.

driving over bumpy / rough roads.

retention and prevent water intrusion into the converter case.

the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There is a latch to keep the glove box closed on both sides of the glove box door. If the door is closed without using enough force to engage both latches or by pushing it shut on just one side instead of in the middle, one may close and not the other. Over time, if the door is not fully closed with both latches, high cabin temperatures along with weight of the items inside the glove box may cause the assembly to deform slightly and a gap to develop.

the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There is a latch to keep the glove box closed on both sides of the glove box door. If the door is closed without using enough force to engage both latches or by pushing it shut on just one side instead of in the middle, one may close and not the other. Over time, if the door is not fully closed with both latches, high cabin temperatures along with weight of the items inside the glove box may cause the assembly to deform slightly and a gap to develop.

The new checker mechanism provides a more ?positive feel? of the detents or check positions as the front doors are opened and closed.

The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with the windows fully closed. The vent grilles have rubber ?shutters? which occasionally, may catch on the frame (case) portion and not close properly allowing outside air / odor to enter the cabin.

The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with the windows fully closed. The vent grilles have rubber ?shutters? which occasionally, may catch on the frame (case) portion and not close properly allowing outside air / odor to enter the cabin.

In some cases, when exiting the vehicle, the trim panel may inadvertently get kicked and become dislodged from the seat cushion assembly. The shape of the front portion of the panel has been changed to prevent this condition.

sound heard while driving over bumpy / rough roads. The sources of the rattle have been identified as: ? the mounting points for the center stop lamp where it fits into the package shelf ? the package shelf itself rattling against the inside of the rear glass ? the rib and/or stand portions located on the underside of the package shelf contacting the shelf portion of the vehicle body.

The bottom edge of the door glass is pressed into a metal channel lined with rubber. The channel attaches the door glass assembly to the window regulator. In below-freezing temperature conditions, water freezing in the channel combined with the door glass sticking to the door weatherstrip can increase chance of the glass separating from the channel when attempting to operate (lower) the window. A lubricant has been added to the rubber portion to insure the glass gets fully seated during assembly which maximizes the clamping force of the channel on the glass.

In rare cases, the cushion(s) may come loose and begin to protrude from under the roof rails where they contact the body.

This bulletin provides a procedure to address a customer reported cosmetic condition of surface rust appearing on the inner seat cushion frame of the front seat assemblies.

sound heard while driving over bumpy / rough roads. The sources of the rattle have been identified as: * the mounting points for the center stop lamp where it fits into the package shelf * the package shelf itself rattling against the inside of the rear glass * the rib and/or stand portions located on the underside of the package shelf contacting the shelf portion of the vehicle body.

THE TOP EDGE OF THE COVER AND THE HEADLAMP ASSEMBLY AS SHOWN BELOW.

THE LOWER PORTION OF THE A PILLAR TRIM WHILE DRIVING OVER BUMPY OR ROUGH ROAD SURFACES. THE LOWER INSERTION CLAWS AND / OR THE TRIMS SUPPORT RIB MAY BE COMING IN CONTACT WITH THE VEHICLE BODY CAUSING THE SOUND.

ASSEMBLY COMING LOOSE, THE RETAINING CLAW PORTION HAS BEEN REDESIGNED TO PROVIDE BETTER RETENTION.

THE LOWER PORTION OF THE A PILLAR TRIM WHILE DRIVING OVER BUMPY OR ROUGH ROAD SURFACES. THE LOWER INSERTION CLAWS AND / OR THE TRIMS SUPPORT RIB MAY BE COMING IN CONTACT WITH THE VEHICLE BODY CAUSING THE SOUND."

ORIGINATING FROM THE FRONT WINDSHIELD UPPER MOLDING / WEATHERSTRIP. THE SOUND IS MOST PREVALENT WHILE DRIVING AT HIGHWAY SPEEDS (APPROXIMATELY 70-75 MPH) WHEN THERE ARE CROSSWINDS PRESENT. THE PROCEDURE INVOLVES THE INSTALLATION OF 2 SMALL STRIPS OF EPDM FOAM MATERIAL, ONE UNDER EACH UPPER CORNER AREA OF THE WINDSHIELD MOLDING LIP TO PREVENT THE CONDITION FROM OCCURRING.

SOUND HEARD WHILE DRIVING OVER BUMPY / ROUGH ROADS. THE SOURCES OF THE RATTLE HAVE BEEN IDENTIFIED AS THE MOUNTING FOR THE CENTER STOP LAMP IN THE PACKAGE SHELF AND / OR THE SHELF ITSELF RATTLING AGAINST THE INSIDE OF THE REAR GLASS.

THE LOWER PORTION OF THE A PILLAR TRIM WHILE DRIVING OVER BUMPY OR ROUGH ROAD SURFACES. THE LOWER INSERTION CLAWS AND / OR THE TRIMS SUPPORT RIB MAY BE COMING IN CONTACT WITH THE VEHICLE BODY CAUSING THE SOUND.

LAMP COVERS INTO THE FRONT BUMPER COVER.

THE LOWER PORTION OF THE A PILLAR TRIM WHILE DRIVING OVER BUMPY OR ROUGH ROAD SURFACES. THE LOWER INSERTION CLAWS AND / OR THE TRIMS SUPPORT RIB MAY BE COMING IN CONTACT WITH THE VEHICLE BODY CAUSING THE SOUND.

ORIGINATING FROM THE FRONT WINDSHIELD UPPER MOLDING / WEATHERSTRIP.

THE PLUGS ARE PLACED IN THE VEHICLES GLOVE BOX DURING PORT PROCESSING. THE INSTALLATION OF THESE PLUGS ELIMINATES THESE OPENINGS AS A SOURCE OF DUST INTRUSION INTO THE VEHICLE.

This information has been developed to reduce unnecessary brake caliper replacement.

If the BLS is out of adjustment, the ABS and/or VDC warning lamp may illuminate.

customer concerns of a squeaking or squealing sound on the models listed above.

(Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall."

Under certain circumstances, some customers may have a concern regarding a howling-type sound from the rear of the vehicle later diagnosed as a faulty hub / bearing assembly. Unevenness of the backing plate surfaces may affect the concentricity (roundness) of the hub / bearing after torqued during assembly and over time, cause the howling -type sound to develop. Production changes for the backing plates have been implemented to optimize their mounting surface quality.

customer concerns of excessive brake squeal. This new kit eliminates the slotted shim which previously was installed between the rubber-coated outer shim and the brake pad.

This will prevent the pad from dragging due to corrosion buildup which may result in uneven or premature wear of the replacement brake pads. This additional instruction applies to all models with brake pads using the upper and lower pad clips and has been added to the brake pad installation procedures found in the related Service Manuals.

allow retailers to place orders for single tools.

(Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.

(Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.

(Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.

customer concerns of a squeaking or squealing sound on the models listed. The new shims incorporate a new laminated design with increased damping characteristics to eliminate vibration identified as the root cause of the sound. The new kits include shims only (NO brake pads).

The change is in response to customer concerns of discomfort coming from the center of the seat back and outside bolsters. When a hook fails, the center (flat) portion of the seat back drops inward from lack of support. If not repaired, with continued use, the seat back frame may break down the foam padding covering it. Eventually, the frame will likely wear through and damage the trim cover.

The change is in response to customer concerns of discomfort coming from the center of the seat back and outside bolsters. When a hook fails, the center (flat) portion of the seat back drops inward from lack of support. If not repaired, with continued use, the seat back frame may break down the foam padding covering it. Eventually, the frame will likely wear through and damage the trim cover.

This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated into the airbag system. The function of the EDR is best explained using the following statements found in the vehicle Owner?s Manual: ?This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations such as an airbag deployment or hitting a road obstacle, data that will assist in the understanding how a vehicle?s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as: ? How various systems in your vehicle were operating; ? Whether or not the driver and passenger safety belts were buckled/fastened; ? How far (if at all) the driver was depressing the accelerator and/or brake pedal; ? How fast the vehicle was traveling. This data can help provide a better understanding of the circumstances in which crashes and injuries occur.

This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for other purposes in the area around the switch, a non-conductive coating may develop over time on the internal electrical contacts and affect operation of the switch. On / Off signal output from the BLS is critical for proper operation of various systems on the vehicle. When the switch does not operate properly, warning lamps illuminate and DTCs are stored. A table with BLS-related DTCs and additional information is provided in the Service Procedure information. A photo of the switch changes is shown below. This bulletin also provides a diagnostic and adjustment procedure to be used when diagnosing brake light switch-related DTCs.

the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for other purposes in the area around the switch, a non-conductive coating may develop over time on the internal electrical contacts and affect operation of the switch. On / Off signal output from the BLS is critical for proper operation of various systems on the vehicle. When the switch does not operate properly, warning lamps illuminate and DTCs are stored. A table with BLS-related DTCs and additional information is provided in the Service Procedure information. A photo of the switch changes is shown below. This bulletin also provides a diagnostic and adjustment procedure to be used when diagnosing brake light switch-related DTCs.

illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for other purposes in the area around the switch, a non-conductive coating may develop over time on the internal electrical contacts and affect operation of the switch. On / Off signal output from the BLS is critical for proper operation of various systems on the vehicle. When the switch does not operate properly, warning lamps illuminate and DTCs are stored. A table with BLS-related DTCs and additional information is provided in the Service Procedure information. A photo of the switch changes is shown below. This bulletin also provides a diagnostic and adjustment procedure to be used when diagnosing brake light switch-related DTCs.

CUSTOMER CONCERNS OF EXCESSIVE BRAKE SQUEAL. THIS NEW KIT ELIMINATES THE SLOTTED SHIM WHICH PREVIOUSLY WAS INSTALLED BETWEEN THE RUBBER-COATED OUTER SHIM AND THE BRAKE PAD.

CUSTOMER CONCERNS OF EXCESSIVE BRAKE SQUEAL. THIS NEW KIT ELIMINATES THE SLOTTED SHIM WHICH PREVIOUSLY WAS INSTALLED BETWEEN THE RUBBER-COATED OUTER SHIM AND THE BRAKE PAD.

THE ABS AND/OR VDC WARNING LAMP WITH RESULTING DTCS C1531 AND/OR C0054. DETAILS OF THE SWITCH CHANGES ARE SHOWN IN THE ILLUSTRATION BELOW.

IF THE BLS IS OUT OF ADJUSTMENT, THE ABS AND/OR VDC WARNING LAMP MAY ILLUMINATE.

THE ABS AND/OR VDC WARNING LAMP WITH RESULTING DTCS C1531 AND/OR C0054. DETAILS OF THE SWITCH CHANGES ARE SHOWN IN THE ILLUSTRATION BELOW.

THE ABS AND/OR VDC WARNING LAMP WITH RESULTING DTCS C1531 AND/OR C0054. DETAILS OF THE SWITCH CHANGES ARE SHOWN IN THE ILLUSTRATION BELOW.

MODELS 2012-14 IMPREZA, XV CROSSTREK (EXCEPT HYBRID), 2008-14 WRX, STI, 2014 FORESTER. *PE

in vehicles experiencing battery drain when the ignition is off, leading to no-start conditions or frequent jump-starts.

Battery Diagnostic tool.

Telematics which are enrolled in the Subaru STARLINK Security Plus Service featuring Stolen Vehicle Recovery Plus with Immobilizer.

Module (DCM) is being tested as a dark current/standby current source.

a dark current/standby current source. All models equipped with Telematics except Solterra.

(Subaru) is recalling certain vehicles in the ranges listed below to inspect and potentially replace the ignition switch. A total of 511 U.S. vehicles will be affected by this recall.

These new EPS control modules address a limited number of customer concerns regarding increased steering effort which may occur during freezing temperatures after a cold start. The cause has been identified as a frozen relay contact inside the control module. Illumination of the EPS warning lamp can also occur and a DTC C2532 may be stored.

Both of these relays are located on the back (front facing) side of the passenger compartment fuse box (F/B).

they are in partially open / closed positions. An additional detent position has also been added.

the Occupant Detection System (ODS). Following these diagnostic steps will help avoid unnecessary ODS sensor / seat cushion assembly replacement

This Service Information bulletin provides precautions to use when removing the HVAC control panel to prevent damaging the blower fan speed switch. When removing the control panel, if the fan speed switch wiring harness is pulled taught or becomes stressed, the switch may be damaged. If the connector (lower) portion of the switch becomes separated from the switch body even slightly (see Fig. 1 on page 2), the HVAC control panel assembly must be replaced. The switch itself is not serviceable. The related instrument panel (IP) wiring harness must also be inspected and replaced if any damage is confirmed. NOTE: For 2012MY Impreza, see TSB 10-78-12, dated 4/18/2012.

address customer concerns of the cover retracting on its own while driving on rough roads. The shape and length (an additional 1mm) of the stoppers on both ends of the brace which secure the cover when in use have been changed as shown in the illustration below.

sub-level sending unit to the fuel tank. In addition, two of the caps are now used in production instead of only one. This change was made to enhance productivity during vehicle assembly.

MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. IN ADDITION, A NEW RETAINING BOLT AND TIGHTENING TORQUE SPECIFICATION ARE NOW USED TO SECURE THE MIRROR HEAD TO THE MOUNTING BASE. THIS BULLETIN PROVIDES A PROCEDURE FOR REPAIRING THE EXISTING MIRROR ASSEMBLY BY REPLACING THE THREE MOUNTING SCREWS WITH UPDATED FASTENERS. NOTE: REFER TO TSB 12-152-13 DATED 6/17/2013 FOR RELATED INFORMATION ON BRZ MODELS.

SECURELY WHEN THEY ARE IN PARTIALLY OPEN POSITIONS. AN ADDITIONAL DETENT POSITION HAS ALSO BEEN ADDED.

B1500 LEADS TO REPLACEMENT OF A FAULTY MAIN AND / OR SUB FUEL LEVEL SENSOR.

AVCS SLOW RESPONSE OR AVCS SYSTEM FAILURE DTCS LISTED ABOVE ARE FOUND TO BE STORED IN THE ECM MEMORY.

THE DIAGNOSTIC PROCEDURE IS ALSO APPLICABLE TO DTCS P0016 AND P0018.

PROVIDES BETTER SEALING AND RESISTANCE TO INTRUSION OF MOISTURE THAT CAN COMPROMISE ELECTRICAL CONNECTION, AND MAY BE IN SOME CASES, CAUSE OIL PRESSURE LAMP TO ILLUMINATE. MODEL 2012-2013 IMPREZA,2011-2013 FORESTER. *PE

*JS

Infotainment concerns.

The update will take place in multiple batches with the first beginneing November 15th and the last being Decemeber 3rd. This update is for approximatelt 714,000 VINs.

1.5.

Inprovement for CarPlay concerns with hands-free calls when the receiving party is not able to hear the caller.

repair of the Infotainment concerns. (Applicable to all models with Harman or Denso CP1 Infotainment).

This bulletin announces a new procedure for updating the operating software used in F10 Gen1 audio / navigation systems. This new procedure eliminates the need to exchange the head unit / SD card to obtain software-related updates and operating enhancements.

This new procedure eliminates the need to exchange the head unit / SD card to obtain software-related updates and operating enhancements. All 2012 to 2015 Models Equipped with FujitsuTen (F10) Generation 1 (Gen1) Audio / Navigation Systems

INVOLVING THE PAIRING AND USE OF CELLULAR PHONES WITH CLARION AUDIO UNITS. THIS INCLUDES CUSTOMER CONCERNS WHERE THE PHONE WILL NOT AUTOMATICALLY PAIR ITSELF BUT INSTEAD REQUIRES MANUAL PHONE SELECTION ON THE AUDIO UNIT TO ALLOW PAIRING TO PROCEED.

INVOLVING THE PAIRING AND USE OF CELLULAR PHONES WITH CLARION AUDIO UNITS. THIS INCLUDES CUSTOMER CONCERNS WHERE THE PHONE WILL NOT AUTOMATICALLY PAIR ITSELF BUT INSTEAD REQUIRES MANUAL PHONE SELECTION ON THE AUDIO UNIT TO ALLOW PAIRING TO PROCEED.

WHEN USING THE F10 AUDIO / NAVIGATION SYSTEM. WE WILL CONTINUE TO ADD MORE HELPFUL TIPS TO THIS TSB AS INFORMATION IS RECEIVED FROM F10.

THIS NEW PROCEDURE ELIMINATES THE NEED TO EXCHANGE THE HEAD UNIT / SD CARD TO OBTAIN SOFTWARE-RELATED UPDATES AND OPERATING ENHANCEMENTS. ALL 2012 TO 2015 MODELS EQUIPPED WITH FUJITSUTEN (F10) GENERATION 1 (GEN1) AUDIO / NAVIGATION SYSTEMS

THIS NEW PROCEDURE ELIMINATES THE NEED TO EXCHANGE THE HEAD UNIT / SD CARD TO OBTAIN SOFTWARE-RELATED UPDATES AND OPERATING ENHANCEMENTS. ALL 2012 TO 2015 MODELS EQUIPPED WITH FUJITSUTEN (F10) GENERATION 1 (GEN1) AUDIO / NAVIGATION SYSTEMS

WHEN USING THE F10 AUDIO / NAVIGATION SYSTEM.

AVAILABLE Q3 2012.

interface firmware has been updated.

will release an OTA to perform a software update to the DCM. This is a preventive OTA.

Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for becoming aware of the latest changes. We advise you to always refer to the STIS web site when looking for the latest Service information. Printed pages will not be made available to update printed Service Manuals.

Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for becoming aware of the latest changes. We advise you to always refer to the STIS web site when looking for the latest Service information. Printed pages will not be made available to update printed Service Manuals.

Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for becoming aware of the latest changes. We advise you to always refer to the STIS web site when looking for the latest Service information. Printed pages will not be made available to update printed Service Manuals.

TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BECOMING AWARE OF THE LATEST CHANGES. WE ADVISE YOU TO ALWAYS REFER TO THE STIS WEB SITE WHEN LOOKING FOR THE LATEST SERVICE INFORMATION. PRINTED PAGES WILL NOT BE MADE AVAILABLE TO UPDATE PRINTED SERVICE MANUALS. PAPER MANUALS MAY HAVE DIFFERENT PAGE NUMBERING THEN WHAT IS REFLECTED BELOW, BASED ON MULTIPLE NEW AND REVISED PAGES. PLEASE REFER TO THE INFORMATION CONTAINED ON THE STIS WEB SITE FOR ALL FUTURE, UPDATE SERVICE MANUAL INFORMATION.

TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BECOMING AWARE OF THE LATEST CHANGES. WE ADVISE YOU TO ALWAYS REFER TO THE STIS WEB SITE WHEN LOOKING FOR THE LATEST SERVICE INFORMATION. PRINTED PAGES WILL NOT BE MADE AVAILABLE TO UPDATE PRINTED SERVICE MANUALS.

TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BECOMING AWARE OF THE LATEST CHANGES. WE ADVISE YOU TO ALWAYS REFER TO THE STIS WEB SITE WHEN LOOKING FOR THE LATEST SERVICE INFORMATION. PRINTED PAGES WILL NOT BE MADE AVAILABLE TO UPDATE PRINTED SERVICE MANUALS.

TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BECOMING AWARE OF THE LATEST CHANGES. WE ADVISE YOU TO ALWAYS REFER TO THE STIS WEB SITE WHEN LOOKING FOR THE LATEST SERVICE INFORMATION. PRINTED PAGES WILL NOT BE MADE AVAILABLE TO UPDATE PRINTED SERVICE MANUALS. PAPER MANUALS MAY HAVE DIFFERENT PAGE NUMBERING THEN WHAT IS REFLECTED BELOW, BASED ON MULTIPLE NEW AND REVISED PAGES. PLEASE REFER TO THE INFORMATION CONTAINED ON THE STI WEB SITE FOR ALL FUTURE, UPDATE SERVICE MANUAL INFORMATION.

retailer-installed accessory exeeds 1.5 percent of the GVWR or 100 pounds, which ever is lower.

combination lamps, where moisture and or condensation may develop on the inside of the lamp lenses.

An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s warning lamp to illuminate.

An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed to set and result in the related system?s warning lamp to illuminate.

on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin identifies the equipment required to initialize (reset) the immobilizer code and cut the key blanks, for both immobilizer and non-immobilizer type keys. Subaru of America began using immobilizer systems in some 2005MY vehicles (please refer to Immobilizer Chart for more detailed information).

An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s warning lamp to illuminate.

ASSEMBLY IS NOW AVAILABLE TO PREVENT THE INTRUSION. THE NEW COMBINATION LAMPS HAVE AN ADDITIONAL LIP MOLDED AROUND THE THREE BULB SOCKET AREAS WHICH DECREASES THE GAP BETWEEN THE SOCKET AND THE HOUSING FROM 2MM TO 0.5MM.

NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH COULD AFFECT OPERATION OR CAUSE IMPROPER ILLUMINATION OF THE OIL PRESSURE WARNING LAMP. A SMALL PILOT PORTION WAS ADDED TO THE THREADED AREA ON P.N. 25240KA051 AS SHOWN IN THE ILLUSTRATION BELOW. REVISED PRODUCTION CHANGE INFORMATION."

NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH COULD AFFECT OPERATION OR CAUSE IMPROPER ILLUMINATION OF THE OIL PRESSURE WARNING LAMP. A SMALL PILOT PORTION WAS ADDED TO THE THREADED AREA ON P.N. 25240KA051 AS SHOWN IN THE ILLUSTRATION BELOW."

INTERMITTENT OPERATION OF THE HILL START ASSIST WARNING LAMP.

STORED DTC C0076 WITH DETAIL CODES 2610H AND/OR 2620H. *JS

seat belt buckle assembly attaches to the seat frame.

seat belt buckle assembly attaches to the seat frame.

seat belt buckle assembly attaches to the seat frame.

seat belt buckle assembly attaches to the seat frame.

seat belt buckle assembly attaches to the seat frame.

seat belt buckle assembly attaches to the seat frame.

the airbag system.

the airbag system.

the airbag system.

seat belt buckle assembly attaches to the seat frame. A design change was made to the wave washer used at the attachment point to eliminate the sound. The sound can be heard when moving the buckle assembly side to side.

THIS BULLETIN PROVIDES INFORMATION REGARDING EVENT DATA RECORDER (EDR) FUNCTIONALITY WHICH HAS BEEN INCORPORATED INTO THE AIRBAG SYSTEM. THE FUNCTION OF THE EDR IS BEST EXPLAINED USING THE FOLLOWING STATEMENTS FOUND IN THE VEHICLE OWNERS MANUAL: THIS VEHICLE IS EQUIPPED WITH AN EVENT DATA RECORDER (EDR). THE MAIN PURPOSE OF AN EDR IS TO RECORD, IN CERTAIN CRASH OR NEAR CRASH-LIKE SITUATIONS SUCH AS AN AIRBAG DEPLOYMENT OR HITTING A ROAD OBSTACLE, DATA THAT WILL ASSIST IN THE UNDERSTANDING HOW A VEHICLES SYSTEMS PERFORMED. THE EDR IS DESIGNED TO RECORD DATA RELATED TO VEHICLE DYNAMICS AND SAFETY SYSTEMS FOR A SHORT PERIOD OF TIME, TYPICALLY 30 SECONDS OR LESS."

concerns possibly resulting from an undetected A/C refrigerant leak.

concerns possibly resulting from an undetected A/C refrigerant leak.

concerns possibly resulting from an undetected A/C refrigerant leak. To improve Fixed Right First-Time (FRFT) and customer satisfaction, SOA is introducing a new procedure and fail code for first-time suspected A/C refrigerant leaks for cases when a Technician is unable to find the source of the leak or believes there was a potential factory under charge of the A/C system refrigerant."

(A/C) performance concerns possibly resulting from an undetected A/C refrigerant leak.

concerns possibly resulting from an undetected A/C refrigerant leak. To improve Fixed Right First-Time (FRFT) and customer satisfaction, SOA is introducing a new procedure and fail code for first-time suspected A/C refrigerant leaks for cases when a Technician is unable to find the source of the leak or believes there was a potential factory under charge of the A/C system refrigerant.

Use the supplied Service Procedure to address a customer concern involving the foam cushion becoming visible above the IP near the defroster vent outlets.

The change involves the addition of a rubber end cap and retaining clip onto the bottom of the receiver-dryer tank portion to prevent corrosion intrusion and enhance sealing.

Use the supplied Service Procedure to address a customer concern involving the foam cushion becoming visible above the IP near the defroster vent outlets

WHENEVER REPLACING THE MFD AND / OR COMBINATION METER, THE LIFETIME FUEL CONSUMPTION FUNCTION OF THE MFD MUST BE RESET FOR ACCURATE INFORMATION TO DISPLAY GOING FORWARD. IF NOT RESET, ERRONEOUS VALUES (EITHER EXTREMELY HIGH IN THE CASE OF A MFD REPLACEMENT OR EXTREMELY LOW FOR A COMBINATION METER REPLACEMENT) FOR LIFETIME FUEL CONSUMPTION WILL BE DISPLAYED. THERE IS NO WAY TO TRANSFER THE OLD / EXISTING LIFETIME FUEL CONSUMPTION RESULTS TO THE NEW MFD OR COMBINATION METER ALLOWING IT TO CONTINUE UNINTERRUPTED. AS A RESULT, AFTER REPLACEMENT OF THE MFD AND / OR COMBINATION METER, ALL CALCULATIONS WILL START FRESH FOLLOWING PERFORMANCE OF THE FOLLOWING PROCEDURES.

WILL EVAPORATE WHEN TEMPERATURE RISES INSIDE LAMPS. MODEL ALL. NO YEARS LISTED. *PE

Please refer to this new bulletin for the latest information regarding this condition.

STORED IN MEMORY, A NEW EPS CONTROL UNIT IS NOW AVAILABLE TO ADDRESS THIS CODE. THERE MAY ALSO BE A CUSTOMER CONCERN OF INCREASED STEERING EFFORT ALONG WITH THE EPS WARNING LIGHT COMING ON.

TROUBLE CODE (DTC) C2532 AND TO ADDRESS CODE A NEW EPS CONTROL UNIT THAT IS AVAILABLE. MODEL 2014 FORESTER, 2012-14 IMPREZA, XV CROSSTREK (INCLUDING HYBRID). *PE

unnecessary bushing replacement.

popping-type sound which may be heard when making low speed turns.

new vehicle inventory.

new vehicle inventory wjhich must be tested and reported every 30 days.

B2A20 with gen 4 Telematics.