2018 Subaru Forester TSBs

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

The updated valve body incorporates an enhanced valve sleeve to improve durability.

The updated valve body incorporates an enhanced valve sleeve to improve durability.

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

engines.

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

on FA and FB type engines.

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

half-throttle.

address DTC P2404 (Evap System Leak Detection Pump Sense Circuit Range/Performance) detection.

Efficiency Below Threshold Bank 1) is detected by the Engine Control Module (ECM).

Efficiency Below Threshold Bank 1) is detected by the Engine Control Module (ECM). If DTC P0420 is found to be stored in the ECM, follow the diagnostic procedures outlined below.

from the timing chain cover, front camshaft cap, camshaft carrier and / or upper oil pan.

deposits from fuel injectors and internal engine components.

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

from the timing chain cover, front camshaft cap, camshaft carrier and / or upper oil pan.

(Subaru) is initiating a new safety recall for certain 2019-2020 MY Ascent, 2018-2019 MY BRZ, 2018 MY Forester (Turbo), 2018-2020 MY Impreza, 2018-2020 MY Legacy, 2018-2020 MY Outback, and 2018-2019 MY WRX vehicles in which the fuel pump may become inoperative.

(Subaru) is initiating a new safety recall for certain 2019-2020 MY Ascent, 2018-2019 MY BRZ, 2018 MY Forester (Turbo), 2018-2020 MY Impreza, 2018-2020 MY Legacy, 2018-2020 MY Outback, and 2018-2019 MY WRX vehicles in which the fuel pump may become inoperative.

(Subaru) is initiating a new safety recall for certain 2019-2020 MY Ascent, 2018-2019 MY BRZ, 2018 MY Forester (Turbo), 2018-2020 MY Impreza, 2018-2020 MY Legacy, 2018-2020 MY Outback, and 2018-2019 MY WRX vehicles in which the fuel pump may become inoperative.

type engines.

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

(Subaru) is initiating a new safety recall for certain 2019-2020 MY Ascent, 2018-2019 MY BRZ, 2018 MY Forester (Turbo), 2018-2020 MY Impreza, 2018-2020 MY Legacy, 2018-2020 MY Outback, and 2018-2019 MY WRX vehicles in which the fuel pump may become inoperative.

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

(Subaru) is initiating a new safety recall for certain 2019-2020 MY Ascent, 2018-2019 MY BRZ, 2018 MY Forester (Turbo), 2018-2020 MY Impreza, 2018-2020 MY Legacy, 2018-2020 MY Outback, and 2018-2019 MY WRX vehicles in which the fuel pump may become inoperative.

P015B.

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

deposits from fuel injectors and internal engine components.

from the timing chain cover, front camshaft cap, camshaft carrier, and/or upper oil pan.

-related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with this new information in the near future.

(Subaru) is initiating a service campaign for certain 2015-2018 Forester 2.0L Turbo and 2016-2018 WRX models which may experience a loosening of the front exhaust pipe nuts.

Forester Turbo and applicable WRX models.

The new logic will address isolated concerns of a hard start condition occurring in cold weather (+10 degrees Fahrenheit or lower) and / or high-altitude areas. When this scenario occurs, the A/F learning control values move toward lean.

These new files address concerns of the check engine light coming on and setting a DTC P0400: EGR A FLOW. The DTC can set if the ECM tests the EGR system when ambient / intake air temperatures are below freezing.

motors used on certain replacement intake manifold assemblies.

of the blower motor becoming inoperative. If this issues occurs on models with Auto A/C, the blower fan may become totally inoperative. If this issue occurs on models with Manual A/C, the blower fan may operate on high speed only. The root cause of these conditions is water intrusion into the blower motor causing rust and corrosion to develop. Over time, the blower motor may begin to draw more electrical current to operate. if that occurs, the additional draw can cause the related fuse and/ or blower resistor to fail. To address this condition, additional packing has been added to improve sealing of the blower unit case along with development of a new style cabin air filter which also in corporates improved sealing.

(Subaru) is initiating a service campaign for certain 2015-2018 Forester 2.0L Turbo and 2016-2018 WRX models which may experience a loosening of the front exhaust pipe nuts. On certain affected vehicles, the six (6) front exhaust pipe (EPF) nuts at the cylinder heads may not have been tightened sufficiently due to variations in production. As a result, these nuts may become loose during use and cause exhaust leakage. A leak occurring at the front exhaust pipe may result in deterioration of emission performance. As a result, affected vehicle may fail to meet emission levels certified by the EPA and/or California ARB.

(Subaru) is initiating a service campaign/ voluntary emissions recall for certain 2015-2018 Forester 2.0L Turbo and 2016-2018 WRX models which may experience a loosening of the fornt exhaust pip nuts.

Water can enter the run channels and cause a stick-slip (judder) condition to occur as the door glass opens and closes. The judder is transferred through the window regulator mechanism in the form of mechanical resistance to the electric window motor. On models equipped with the Auto-up and Auto-down feature, if the level of this resistance increases enough, the auto-reversing (anti-entrapment) feature can activate and cause an inability to close the window.

from the timing chain cover, front camshaft cap, camshaft carrier and / or upper oil pan. There are five areas that should be closely inspected if an oil leak is reported by the customer: 1. The 6mm tapped hole casting boss area in the left-hand camshaft cap 2. The sealing surfaces between either the left or right-hand camshaft cap and camshaft carrier 3. The sealing surfaces between the cylinder head and camshaft carrier 4. The sealing surface between the upper oil pan and the engine block 5. The sealing surfaces of the front timing chain cover

address DTC P2610: ECM/PCM ENGINE OFF TIMER PERFORMANCE. Under certain RARE conditions, an electrostatic surge may influence the ECMs internal timer used after the engine is turned off and store a DTC P2610 in memory. Hardware in the ECM has been changed to eliminate any impact from electrostatic surges.

address DTC P2610: ECM/PCM ENGINE OFF TIMER PERFORMANCE. Under certain RARE conditions, an electrostatic surge may influence the ECMs internal timer used after the engine is turned off and store a DTC P2610 in memory. Hardware in the ECM has been changed to eliminate any impact from electrostatic surges.

-related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with this new information in the near future.

Condensation resulting from EGR system operation may enter the area between the TGV shaft and bearing. Over time, corrosion can develop and impede movement of the TGV shaft and cause any of the DTCs P2004, 2005, 2006 and /or P2007 to set. The material of the TGV shaft has been changed to stainless steel to optimize corrosion resistance.

-related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with this new information in the near future.

which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness connector portion of the valve. If oil seeps into the connector, over time, the Check Engine lamp may illuminate and set various AVCS-related DTCs.

Contamination in a fluid pressure solenoid valve can cause a DTC P0841. The new logic will allow the solenoid to operate in a manner enabling it to discharge the contamination.

steering (EPS) gearbox (steering rack) assembly. If a vehicle presents with a ?rattling?, ?knocking? or possibly a ?clanging? type sound coming from the steering rack and / or a vibration felt through the steering wheel, use the flow chart below to help make diagnosis of the concern easier.

electronic power steering (EPS) gearbox (steering rack) assembly. If a vehicle presents with a ?rattling?, ?knocking? or possibly a ?clanging? type sound coming from the steering rack and / or a vibration felt through the steering wheel, use the flow chart below to help make diagnosis of the concern easier.

This bulletin announces reprogramming file availability to optimize the Transmission Control Module (TCM) used with the TR580 CVT. Contamination in a fluid pressure solenoid valve can cause a DTC P0841. The new logic will allow the solenoid to operate in a manner enabling it to discharge the contamination.

This bulletin announces reprogramming file availability to optimize the Transmission Control Module (TCM) used with the TR580 CVT. Contamination in a fluid pressure solenoid valve can cause a DTC P0841. The new logic will allow the solenoid to operate in a manner enabling it to discharge the contamination.

?ON? within one minute after the first time the ignition is turned ?OFF?, it becomes possible for the CEL to illuminate storing DTC P0606 in memory. The code will not occur immediately, but may occur after a period of time depending upon how the vehicle is operated

concerns: ? Check Engine light coming on (with DTC P05A0 stored in memory). ? Potential battery discharge (dead battery) after repeated periods of short-trip driving. ? A high (or ?hanging?) engine RPM after depressing the clutch pedal (Forester only).

which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness connector portion of the valve. If oil seeps into the connector, over time, the Check Engine lamp may illuminate and set various AVCS-related DTCs.

Contamination in a fluid pressure solenoid valve can cause a DTC P0841. The new logic will allow the solenoid to operate in a manner enabling it to discharge the contamination.

in vehicles experiencing battery drain when the ignition is off, leading to no-start conditions or frequent jump-starts.

Battery Diagnostic tool.

(SOA) is extending the Data Communication Module (DCM) Warranty from 3 years (36 months) of 36,000 miles to 8 years (96 months) or 100,000 miles, whichever comes first.

equipped with Gen 1 Data Control Modules.

Telematics which are enrolled in the Subaru STARLINK Security Plus Service featuring Stolen Vehicle Recovery Plus with Immobilizer.

in response to the 3G network sunsetting.

Module (DCM) is being tested as a dark current/standby current source.

a dark current/standby current source. All models equipped with Telematics except Solterra.

(SOA) is extending the Data Communication Module (DCM) Warranty from 3 years (36 months) of 36,000 miles to 8 years (96 months) or 100,000 miles, whichever comes first.

equipped with Gen 1 Data Control Modules.

To reduce extended downtime for the customer, this bulletin announces the diagnostic and repair procedures to be used when DTC B1760 (Occupant Detection Sensor Mat). The use of WUM-98 sensor harness kit should be used in place of the cushion assembly.

In rare cases, customers may experience a dead battery as a result of the DCM continually trying to access the 3G network.

Telematics Data Communication Module (DCM). This coverage will apply to the vehicles listed for vehicles sold or leased in the United States.

(Subaru) is extending the Data Communication Module (DCM) warranty from three years (36 months or 36K miles) to eight years (96 months or 100K miles), whichever comes first. This extension is in light of the rare cases of dead batteries experienced by customers.

vehicles due to sunsetting of the 3G network.

equipped with Gen 1 Data Control Modules.

(2)

in certain Subaru vehicles.

are enrolled in the Subaru STARLINK Security Plus Service featuring Stolen Vehicle Recovery Plus with Immobilizer.

P0841- SECONDARY OIL PRESSURE SENSOR PERFORMANCE.

Telematics Data Communication Module (DCM) along with a new claim submission requirement.

of the STARLINK Telematics Data Communication Module (DMC).

of the STARLINK Telematics Data Communication Module (DCM). All models with STARLINK Telematics System.

and/or installation practices.

(Subaru) is recalling certain 2015-2018 model year Forester vehicles to replace the passenger-side front airbag Occupant Detection System (ODS) harness. A total of 366,282 U.S. vehicles will be affected by this recall.

complete all remaining repairs for this recall.

Subarunet under Recalls & Campaigns. If available, seat cushions can continue to be ordered and used to satisfy the recall as well.

(Subaru) is recalling certain 2015-2018 model year Forester vehicles to replace the passenger-side front airbag Occupant Detection System (ODS) harness. A total of 366,282 U.S. vehicles will be affected by this recall.

Harness inventory (Part# 64084SG23A) is now available and must be ordered through PRIME-- Retailer order levels are on Subarnet under Recalls & Campaigns. If available, seat cushions can continue to be ordered and used to satisty the recall as well.

(Subaru) is recalling certain 2015-2018 model year Forester vehicles to replace the passenger-side front airbag Occupant Detection System (ODS) harness. A total of 366,282 U.S. vehicles will be affected by this recall.

(Subaru) is recalling certain 2015-2018 model year Forester vehicles to replace the passenger-side front airbag Occupant Detection System (ODS) harness. A total of 365,515 U.S. vehicles will be affected by this recall.

(Subaru) is recalling certain 2015-2018 model year Forester vehicles to replace the passenger-side front airbag Occupant Detection System (ODS) harness. A total of 366,282 U.S. vehicles will be affected by this recall.

(Subaru) is recalling certain 2015-2018 model year Forester vehicles to replace the passenger-side front airbag Occupant Detection System (ODS) harness. A total of 355,151 U.S. vehicles will be affected by this recall.

The number of wiring checks found in Step 9 has been reduced from six to three as shown in the illustration below. The Service Manual will be updated with these revisions in the near future.

The new logic provides enhanced ignition timing control during Exhaust Gas Recirculation (EGR) operation.

generating popping, clicking or creaking sounds when the body is in a ?twisting? condition. This can occur while driving on rough, irregular or uneven road surfaces or even during lowspeed maneuvers such as pulling into or backing out of a driveway. Production information and field reports received indicate where multiple layers of the vehicle?s body structure are spot-welded together, primarily in the ?D?-pillar and rear gate opening areas, a ?stick-slip? condition can occur between the layers and cause these types of sounds to occur. Service information has been released previously describing similar conditions which involved accessing and then punching or separating the layers of metal and applying a lubricant to prevent recurrence. Those same techniques may also provide good results on these vehicles too but, in some cases, a Body Shop repair may be required.

B1650- ?Occupant Classification System Malfunction?. This DTC may also be accompanied by B1760, B1761, B1771 or B1795 as found in the Occupant Detection control module. The new procedure is designed to help avoid unnecessary part (seat cushion assembly) replacements.

B1650-?Occupant Classification System Malfunction?. This DTC may also be accompanied by B1760, B1761, B1771 or B1795 as found in the Occupant Detection control module. The new procedure is designed to help avoid unnecessary part (seat cushion assembly) replacements.

The (new) -style originally used on Legacy and Outback has been adapted.

B1650- ?Occupant Classification System Malfunction?. This DTC may also be accompanied by B1760, B1761, B1771 or B1795 as found in the Occupant Detection control module. The new procedure is designed to help avoid unnecessary part (seat cushion assembly) replacements.

Sensor Mat Abnormal and/or B1650- Occupant Classification System Malfunction. This information replaces the current procedure until the Service Manual is updated in the near future. DTC B1760 and/or B1650 may set if liquid inadvertently spilled onto the seat cushion (or rain water entering from a window left open) penetrates the upholstery and reaches the sensor mat. These DTCs can also set under high humidity conditions.

This Service Information bulletin provides precautions to use when removing the HVAC control panel to prevent damaging the blower fan speed switch. When removing the control panel, if the fan speed switch wiring harness is pulled taught or becomes stressed, the switch may be damaged. If the connector (lower) portion of the switch becomes separated from the switch body even slightly (see Fig. 1 on page 2), the HVAC control panel assembly must be replaced. The switch itself is not serviceable. The related instrument panel (IP) wiring harness must also be inspected and replaced if any damage is confirmed. NOTE: For 2012MY Impreza, see TSB 10-78-12, dated 4/18/2012.

(Immobilizer Key Collation Diagnosis).

center.

models.

February.

models.

models.

models.

is extending the New Car Basic Warranty coverage for the 12 Volt batteries used in the above listed models and model years beyond the original three (3) years or thirty six thousand miles (36,000), whichever comes first.

Gate (PRG) systems.

is extending the New Car Basic Warranty coverage for the 12 Volt batteries used in the above listed models and model years beyond the original three (3) years or thirty six thousand miles (36,000), whichever comes first.

is extending the New Car Basic Warranty coverage for the 12 Volt batteries used in the above listed models and model years beyond the original three (3) years or thirty six thousand miles (36,000), whichever comes first.

models.

Technical Information System (STIS) web site.

Information System (STIS) web site.

models

(SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.

Technical Information System (STIS) web site.

Technical Information System (STIS) web site.

(SOA) is extending the New Car Limited Warranty for the rear gate stays on the listed models and model years.

Rear Gate Stays.

(SOA) is extending the New Car Limited Warranty for the rear gate stays on the listed models and model years. This will apply to Forester models with or without the power rear gate (PRG).

concerns relating to the operation of their Gen 2 Telematics system equipped Subaru.

COMMUNICATION ERROR on the models listed.

Technical Information System (STIS) web site.

expect in the coming days.

the WUM-98 ODS recall announced on October 8, 2019, Subaru of America, Inc. (SOA) is pleased to provide financial assistance during the time repairs are unavailable.

(SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.

Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for becoming aware of the latest changes. We advise you to always refer to the STIS web site when looking for the latest Service information.

Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for becoming aware of the latest changes.

The two small retaining slide bolts /cap nuts previously used have been eliminated.

Infotainment concerns.

The update will take place in multiple batches with the first beginneing November 15th and the last being Decemeber 3rd. This update is for approximatelt 714,000 VINs.

1.5.

Inprovement for CarPlay concerns with hands-free calls when the receiving party is not able to hear the caller.

generation.

generation.

repair of the Infotainment concerns. (Applicable to all models with Harman or Denso CP1 Infotainment).

equipped with F10 7 Navigation and 7 Display Audio head units.

equipped with F10 7 Navigation and 7 Display Audio head units.

equipped with F10 7 Navigation and 7 Display Audio head units.

additional operational concerns received from the field and listed involving Gen 2 F10 Navigation and Display Audio units with 7 display.

vehicles listed above equipped with F10 7 Navigation and 7 Display Audio head units. When the user plays a pre-recorded CD, Gracenote recognizes the disc then shows the artist and track name information along with the album cover art on the head unit display (when available). This enhancement brings the currently installed database up to date with the most recent information available. This update does not affect any album art displayed when using SXM.

additional operational concerns received from the field and listed involving Gen 2 F10 Navigation and Display Audio units with 7 display.

feature from the STARLINK app lineup effective 12 midnight on Thursday, September 24, 2020.

vehicles listed equipped with F10 7" Navigation and 7" display audio head units.

(SOA) is extending the New Car Limited Warranty for the listed models and model years equipped with a Harman Gen. 3.0 Audio and Navigation head unit.

additional operational concerns received from the field and listed below involving an F10 Navigation and Display Audio units with 7' display.

operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2" display.

Units in certain Subaru vehicles.

vehicles listed above equipped with F10 7 Navigation and 7 Display Audio head units. When the user plays a pre-recorded CD, Gracenote recognizes the disc then shows the artist and track name information along with the album cover art on the head unit display (when available). This enhancement brings the currently installed database up to date with the most recent information available. This update does not affect any album art displayed when using SXM."

play music files stored on a customers Android phone / device through the head units (H/U) used in the applicable models listed above. This information is applicable ONLY to Android devices operating with Operating System (OS) version 10. IOS (AppleTM) devices are not affected.

additional operational concerns received from the field and listed below involving Gen 2 F10 Navigation and Display Audio units with 7 display. The procedure will involve downloading the applicable software update files then loading them onto two flash drives for audio unit installation.

additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update files then loading them onto two flash drives for audio unit installation.

vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units.

additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display.

operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.

vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units. When the user plays a pre-recorded CD, Gracenote recognizes the disc then shows the artist and track name information along with the album cover art on the head unit display (when available). This enhancement brings the currently installed database up to date with the most recent information available.

operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.

vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units. When the user plays a pre-recorded CD, Gracenote recognizes the disc then shows the artist and track name information along with the album cover art on the head unit display (when available). This enhancement brings the currently installed database up to date with the most recent information available.

Please start by completing the Harman Investigation Guide Questionnaire as it gathers important details which will help with diagnosis and will be required should the condition not be resolved by this troubleshooting. While completing the questionnaire, follow the question flow based on the customer concern. Answer each related question noting the results to each in detail while performing the diagnostics. Review the entire bulletin before beginning in order to understand the flow for the listed concern. If the customer?s concern is not listed, check the Service Manual ?Infotainment (Diagnostics) - Diagnostics with Phenomena? section as a starting point.

additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update files then loading them onto two flash drives for audio unit installation.

Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update files then loading them onto two flash drives for audio unit installation. It is important to read through and understand this information completely before proceeding. These latest software updates contain new logic.

operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation.

been temporarily removed from Subarunet due to potential quality concerns with the 2nd file used in those updates. Retailers are requested to take the following action: ? If any of the following Fujitsu 10 Audio / Navigation files have been downloaded and saved locally, please discontinue their use and delete them immediately

This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure.

This bulletin provides a repair procedure to address specific, confirmed customer concerns of: ? Audio output interruption every 2-3 seconds when listening to AM or FM radio broadcasts ? No audio output at all when attempting to listen to a HD Radio broadcast.

additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update files then loading them onto two flash drives for audio unit installation.

proper exchange procedure.

202 and / or 204 may occur preventing the process from completing successfully.

the operation of their Gen 2/Gen 3 Telematics system equipped Subaru.

proper exchange procedure.

preliminary settlement in a class action lawsuit regarding the EyeSight system in certain Subaru vehicles.

vehicle's production.

Subaru Lock Information web-site.

retailers of the SOA321152 and SOA321153 Terminal Test Kits.

preventing the process from completing successfully.

impacts the way some vehicles with accessories are sold. This regulation applies to any automobile retailer installing accessories on a vehicle prior to its first sale.

proper exchange procedure.

proper exchange procedure for 2025MY vehicles.

Subaru Lock Information web-site.

Subaru Lock Information web-site.

whichever comes first.

proper exchange procedure.

regarding a growling-type sound being heard from under the vehicle when driving.

track assembliesd.

Advanced Automatic Collision Notification (AACN) feature operation, diagnostic tips, and best practices.

track assemblies used on the models listed.

proper exchange procedure.

The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Policies and Procedures Manual found in Subarunet.

The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Policies and Procedures Manual found in Subarunet. "

The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Policies and Procedures Manual found in Subarunet.

proper exchange procedure.

proper exchange procedure.

from the CVT assembly.

available.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park.

high-pitched sound coming from the transmission extension housing area.

certain CVT solenoid related DTCs as listed.

not being able to remove the key from the ignition switch when the vehicle is in Park.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park.

(SOA) is announcing an extension to the Basic New Car Limited Warranty for the CVT Parking Switch for certain 2015-2018 MY Legacy, Outback, 2012-2018 MY Impreza, 2013-2018 MY Crosstrek, 2015-2018 MY WRX and 2014-2018MY Forester vehicles.

extension to the Basic New Car Limited Warranty for your vehicles CVT Parking Brake Switch.

from the CVT assembly.

(SOA) is announcingan extension to the Basic New Car Limited Warranty for the Electronic Power Steering (EPS) GearBox Assembly for certain 2012-2018 MY vehicles.

Basic New Car Limited Warranty for your vehicles Electronic Power Steering Gear Box Assembly.

(SOA) is announcing an extension to the Basic New Car Limited Warranty for the Electronic Power Steering Gear Box Assembly for certain 2012-2018 MY vehicles.

TSB 15-279-21: Gen1 Telematics DCM Replacement for 3G Sunset which is applicable to manual transmission vehicles with push-button start ONLY.

from the CVT assembly.

related DTCs.

isolated customer concerns of a rattling / vibration -type sound from the shift knob. The sound is primarily reported while driving in 4th gear between 1900 and 2500 rpm.

Investigation has identified likely sources of the seepage to be the sealant used on the CVTs oil pump chain cover and the input shaft oil seal. The repair involves chain cover removal, a thorough cleaning and inspection of the sealing surfaces followed by re-sealing the cover and replacement of the input shaft oil seal with the new, redesigned type.

Investigation has identified likely sources of the seepage to be the sealant used on the CVTs oil pump chain cover and the input shaft oil seal. The repair involves chain cover removal, a thorough cleaning and inspection of the sealing surfaces followed by re-sealing the cover and replacement of the input shaft oil seal with the new, redesigned type"

-type sound heard or felt when making sharp turns. If an applicable vehicle presents with the condition as described, it is recommended to perform the transfer clutch break-in procedure as described.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contamination of the Park-Range switch internal components.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contamination of the Park-Range switch internal components.

During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases where the operator keeps a foot on the clutch pedal for extended periods, an increased amount of heat is generated which can cause the grease inside the bearing to deteriorate. In a case of prolonged clutch pedal application, seizure of the bearing can occur with potential damage to other related components.

(SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model years from the original five (5) years or sixty thousand (60,000) miles (whichever comes first) to ten (10) years or one-hundred thousand (100,000) miles (whichever comes first). This change is not in response to any specific condition, rather it is to provide customers with added assurance regarding the function and overall performance of their CVT.

During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases where the operator keeps a foot on the clutch pedal for extended periods, an increased amount of heat is generated which can cause the grease inside the bearing to deteriorate. In a case of prolonged clutch pedal application, seizure of the bearing can occur with potential damage to other related components.

(SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model years from the original five (5) years or sixty thousand (60,000) miles (whichever comes first) to ten (10) years or one-hundred thousand (100,000) miles (whichever comes first). This change is not in response to any specific condition, rather it is to provide customers with added assurance regarding the function and overall performance of their CVT.

The shape of the lock plate and output of the shift lock solenoid have been changed.

VERY limited number of customer concerns regarding uneven steering effort felt when turning left or right. In areas where high concentrations of road salt are used to melt ice and snow, corrosion may develop and cause a portion of the gear box housing to crack if the vehicle were to suffer a large enough impact from hitting a pothole or similar type of road hazard.

concerns possibly resulting from an undetected A/C refrigerant leak.

concerns possibly resulting from an undetected A/C refrigerant leak.

concerns possibly resulting from an undetected A/C refrigerant leak. To improve Fixed Right First-Time (FRFT) and customer satisfaction, SOA is introducing a new procedure and fail code for first-time suspected A/C refrigerant leaks for cases when a Technician is unable to find the source of the leak or believes there was a potential factory under charge of the A/C system refrigerant."

(A/C) performance concerns possibly resulting from an undetected A/C refrigerant leak.

concerns possibly resulting from an undetected A/C refrigerant leak. To improve Fixed Right First-Time (FRFT) and customer satisfaction, SOA is introducing a new procedure and fail code for first-time suspected A/C refrigerant leaks for cases when a Technician is unable to find the source of the leak or believes there was a potential factory under charge of the A/C system refrigerant.

(Subaru) is initiating a service program to check and, if necessary, replace the air conditioning condenser assembly in certain 2017 and 2018 model year Forester vehicles.

(Subaru) is initiating a service program to check and, if necessary, replace the air conditioning condenser assembly in certain 2017 and 2018 model year Forester vehicles.

(Subaru) is initiating a service program to check and, if necessary, replace the air conditioning condenser assembly in certain 2017 and 2018 model year Forester vehicles.

system performance accompanied by a rattling and / or scraping type sound.

(Subaru) is initiating a service program to check and, if necessary, replace the air conditioning condenser assembly in certain 2017 and 2018 model year Forester vehicles.

(Subaru) is initiating a service program to check and, if necessary, replace the air conditioning condenser assembly in certain 2017 and 2018 model year Forester vehicles.

(Subaru) is initiating a service program to check and, if necessary, replace the air conditioning condenser assembly in certain 2017 and 2018 model year Forester vehicles.

(Subaru) is initiating a service program to check and, if necessary, replace the air conditioning condenser assembly in certain 2017 and 2018 model year Forester vehicles.

system performance accompanied by a rattling and/or scraping type sound.

(SOA) is extending the Basic New Car Limited Warranty coverage for the Condenser component of the Air Conditioning system on all 2017 and a limited number of 2018MY Forester model vehicles.

(SOA) is extending the basic New Car Limited Warranty coverage for the Condenser component of the Air Conditioning system on all 2017 and certain 2018 MY Forester model vehicles.

In the case where a refrigerant leak is identified as coming from the a/c condenser, the level of refrigerant oil may also drop and cause the internal vanes of the compressor to make a chattering-type sound. A new-style A/C condenser has been established with enhanced corrosion resistance.

In the case where a refrigerant leak is identified as coming from the a/c condenser, the level of refrigerant oil may also drop and cause the internal vanes of the compressor to make a chattering-type sound. A new-style A/C condenser has been established with enhanced corrosion resistance.

Use the supplied Service Procedure to address a customer concern involving the foam cushion becoming visible above the IP near the defroster vent outlets.

In addition, the new part utilizes materials with increased anti-corrosion performance.

The change will address concerns where the temperature selected for cooling ?feels? warmer to the customer than the temperature displayed. The new programming will adjust the threshold for when cooling occurs to improve the air conditioning system?s cooling effect making it more closely match the customer?s selected temperature.

Use the supplied Service Procedure to address a customer concern involving the foam cushion becoming visible above the IP near the defroster vent outlets

Rail/System Pressure Too Low Bank 1).

(SOA) is extending the Warranty coverage time period for the fuel pump impeller to 15 years.

(SOA) is extending the Warranty coverage time period for the fuel pump impeller to 15 years.

(SOA) is extending the Warranty coverage time period for the fuel pump impeller to 15 years."

(SOA) is announcing an extension to the Emissions Warranty for Front Exhaust Pipe Bellows cracks on certain 2017-2018MY Forester vehicles. This will extend coverage under the Emissions Warranty on vehicles sold or leased in the United States.

concerns of some customers regarding a rattle-type noise or fluttering sound coming from the undercarriage, during acceleration.

The covers have a redesigned shape to provide a more streamlined fit with the previously re-designed front exhaust pipe bellows.

concerns regarding a rattle-type noise from the undercarriage during acceleration.

(Subaru) is initiating a new safety recall in which the fuel pump may become inoperative.

The purpose of the change is to improve parts integration (or ?commonality?) between models.

seat belt buckle assembly attaches to the seat frame.

seat belt buckle assembly attaches to the seat frame.

seat belt buckle assembly attaches to the seat frame.

seat belt buckle assembly attaches to the seat frame.

seat belt buckle assembly attaches to the seat frame.

Advanced Automatic Collision Notification (AACN) (Gen2), without a collision, airbag deployment, or accident taking place.

seat belt buckle assembly attaches to the seat frame.

the airbag system.

the airbag system.

Subaru of America, Inc. is pleased to announce immediate availbilty and release of current stock of Forester seat cushions.

the airbag system.

adjustment/calibration of the EyeSight system after body repair procedures have been performed.

exposure to pollen on painted surfaces on vehicles imported from Japan. This bulletin does not apply to SIA built vehicles.

Gate (PRG) or trunk release operating (or finding the PRG/trunk open unexpectedly after parking) without a specific input (button press) from the operator.

incorporating improved sealing to prevent potential oil seepage.

The design changes provide the bolt with an increased durability against rust.

The new part number is F551SAN010. The change was made to address concerns regarding the ?mushroom? anchors either pulling out of the trim panel and or gapping visibly at the base of the anchor between the black plastic spacer and trim panel.

retention and prevent water intrusion into the converter case.

The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with the windows fully closed. The vent grilles have rubber ?shutters? which occasionally, may catch on the frame (case) portion and not close properly allowing outside air / odor to enter the cabin.

Various paint manufacturers designate their own stock numbers and coding information although many of the major suppliers are now using the SOA paint codes to help eliminate possible confusion. Their color formulations are updated on a continual basis. Some vendors may have different color names than those provided to them by SOA. Be sure to double-check the codes and formulas beforehand to help insure an accurate color match. Should discrepancies arise, please refer your Body Shop contact inquiries to the specific paint vendor or their jobber / supplier for the most updated formula information. The paint coding information can be found on the vehicle's VIN plate.

unnecessary bushing replacement.

retaining nut area of the front strut mounts.

resistance to imperfections resulting from shock loads.

resistance to imperfections resulting from shock loads.

retailer-installed accessory exeeds 1.5 percent of the GVWR or 100 pounds, which ever is lower.

combination lamps, where moisture and or condensation may develop on the inside of the lamp lenses.

DCM_06.00.17_20190816 installed and they wish to subscribe to Starlink Telematics Service, the DCM must be replaced.

combination lamps.

The new lens has optimized light distribution characteristics while remaining interchangeable with the original type.

This Service Information bulletin provides detailed part information along with installation instructions for the optional 2018MY 50th Anniversary badges designed to commemorate 50 Years of Subaru in America.

(SOA) is extending the New Car Limited Warranty coverage in the models listed. The extension will address instances of phantom braking or the EyeSight/RAB systems causing unnecessary stoppage/slowing of the vehicle.

(SOA) is extending the New Car Limited Warranty coverage in the models listed for the selected EyeSight & Reverse Automatic Braking (RAB) components.

applying additional anti-corrosion material to the four-way (2-2 way) joint connector area of the brake line system on Forester, Impreza, WRX, and STI vehicles previously repaired under the WQK-47 (14V-311) brake line corrosion recall prior to the December 23, 2014 WQK-47 recall bulletin revision. The revisions to the bulletin are for part number changes.

This information has been developed to reduce unnecessary brake caliper replacement.

This will prevent the pad from dragging due to corrosion buildup which may result in uneven or premature wear of the replacement brake pads. This additional instruction applies to all models with brake pads using the upper and lower pad clips and has been added to the brake pad installation procedures found in the related Service Manuals.

This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated into the airbag system. The function of the EDR is best explained using the following statements found in the vehicle Owner?s Manual: ?This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations such as an airbag deployment or hitting a road obstacle, data that will assist in the understanding how a vehicle?s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as: ? How various systems in your vehicle were operating; ? Whether or not the driver and passenger safety belts were buckled/fastened; ? How far (if at all) the driver was depressing the accelerator and/or brake pedal; ? How fast the vehicle was traveling. This data can help provide a better understanding of the circumstances in which crashes and injuries occur.

interface firmware has been updated.

will release an OTA to perform a software update to the DCM. This is a preventive OTA.

TSB 15-20516R has been revised with new file names where applicable and re-posted to STIS.

B2A20 with gen 4 Telematics.

new vehicle inventory.

new vehicle inventory wjhich must be tested and reported every 30 days.

customer concerns of a rattle-type sound and / or a possible vibration felt in the steering wheel.

This Service Information bulletin announces a revision to the diagnostic procedure used when diagnosing either DTC B2910 or 2911 ?Steering Responsive Headlight Communication? LH or RH.

customer concerns of a rattle-type sound and / or a possible vibration felt in the steering wheel. The material for the cushion portion of the front bushing has been changed.