2015 Subaru Forester TSBs

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

The updated valve body incorporates an enhanced valve sleeve to improve durability.

The updated valve body incorporates an enhanced valve sleeve to improve durability.

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

engines.

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

on FA and FB type engines.

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

from the timing chain cover, front camshaft cap, camshaft carrier and / or upper oil pan.

deposits from fuel injectors and internal engine components.

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

from the timing chain cover, front camshaft cap, camshaft carrier and / or upper oil pan.

type engines.

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).

deposits from fuel injectors and internal engine components.

is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicles to 8 years / 100,000 miles from the original warranty start date.

is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicles to 8 years / 100,000 miles from the original warranty start date.

is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicles to 8 years / 100,000 miles from the original warranty start date.

is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicles to 8 years / 100,000 miles from the original warranty start date.

from the timing chain cover, front camshaft cap, camshaft carrier, and/or upper oil pan.

-related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with this new information in the near future.

(Subaru) is initiating a service campaign for certain 2015-2018 Forester 2.0L Turbo and 2016-2018 WRX models which may experience a loosening of the front exhaust pipe nuts.

Forester Turbo and applicable WRX models.

The new logic will address isolated concerns of a hard start condition occurring in cold weather (+10 degrees Fahrenheit or lower) and / or high-altitude areas. When this scenario occurs, the A/F learning control values move toward lean.

of the blower motor becoming inoperative. If this issues occurs on models with Auto A/C, the blower fan may become totally inoperative. If this issue occurs on models with Manual A/C, the blower fan may operate on high speed only. The root cause of these conditions is water intrusion into the blower motor causing rust and corrosion to develop. Over time, the blower motor may begin to draw more electrical current to operate. if that occurs, the additional draw can cause the related fuse and/ or blower resistor to fail. To address this condition, additional packing has been added to improve sealing of the blower unit case along with development of a new style cabin air filter which also in corporates improved sealing.

(Subaru) is initiating a service campaign for certain 2015-2018 Forester 2.0L Turbo and 2016-2018 WRX models which may experience a loosening of the front exhaust pipe nuts. On certain affected vehicles, the six (6) front exhaust pipe (EPF) nuts at the cylinder heads may not have been tightened sufficiently due to variations in production. As a result, these nuts may become loose during use and cause exhaust leakage. A leak occurring at the front exhaust pipe may result in deterioration of emission performance. As a result, affected vehicle may fail to meet emission levels certified by the EPA and/or California ARB.

(Subaru) is initiating a service campaign/ voluntary emissions recall for certain 2015-2018 Forester 2.0L Turbo and 2016-2018 WRX models which may experience a loosening of the fornt exhaust pip nuts.

Water can enter the run channels and cause a stick-slip (judder) condition to occur as the door glass opens and closes. The judder is transferred through the window regulator mechanism in the form of mechanical resistance to the electric window motor. On models equipped with the Auto-up and Auto-down feature, if the level of this resistance increases enough, the auto-reversing (anti-entrapment) feature can activate and cause an inability to close the window.

from the timing chain cover, front camshaft cap, camshaft carrier and / or upper oil pan. There are five areas that should be closely inspected if an oil leak is reported by the customer: 1. The 6mm tapped hole casting boss area in the left-hand camshaft cap 2. The sealing surfaces between either the left or right-hand camshaft cap and camshaft carrier 3. The sealing surfaces between the cylinder head and camshaft carrier 4. The sealing surface between the upper oil pan and the engine block 5. The sealing surfaces of the front timing chain cover

-related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with this new information in the near future.

Condensation resulting from EGR system operation may enter the area between the TGV shaft and bearing. Over time, corrosion can develop and impede movement of the TGV shaft and cause any of the DTCs P2004, 2005, 2006 and /or P2007 to set. The material of the TGV shaft has been changed to stainless steel to optimize corrosion resistance.

-related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with this new information in the near future.

which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness connector portion of the valve. If oil seeps into the connector, over time, the Check Engine lamp may illuminate and set various AVCS-related DTCs.

These new files will address customer concerns of: ? Spark knock (ping) during high intake air temperature operation ? Surge on acceleration due to phantom knock detection ? Check Engine light illumination resulting from DTC P113A and / or P0137 being stored in the ECM memory.

The new springs have different color paint marks to help identify their application.

prevent false detection of DTC P0841 and / or illumination of the AT Temp light. Testing has revealed in some limited cases, air bubbles (aerated fluid) may enter certain pressure circuits within the control valve assembly causing fluid pressure control and adjustment to be calculated incorrectly resulting in DTC P0841. The shape of these circuits has been changed to prevent this occurrence.

steering (EPS) gearbox (steering rack) assembly. If a vehicle presents with a ?rattling?, ?knocking? or possibly a ?clanging? type sound coming from the steering rack and / or a vibration felt through the steering wheel, use the flow chart below to help make diagnosis of the concern easier.

assembly line efficiency and increase durability. In some cases, the Check Engine light may illuminate and a knock sensor-related DTC set in the ECM memory: P0327, P0328, P0332 and P0333. The knock sensor for DIT engines is now utilized for NA engines to improve durability and resistance to heat.

electronic power steering (EPS) gearbox (steering rack) assembly. If a vehicle presents with a ?rattling?, ?knocking? or possibly a ?clanging? type sound coming from the steering rack and / or a vibration felt through the steering wheel, use the flow chart below to help make diagnosis of the concern easier.

either inoperative or only operates on high speed. ? Excessive rotational-type sound heard when the fan is operating.

Return Policy (See Parts Policy & Procedures Manual ? Section 12.3 Core Returns ? Reman) and provide suggestions for removal and handling of the short block.

is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oilconsumption on applicable vehicles to 8 years / 100,000 miles from the original warranty start date.This Warranty Extension will not cover any excessive engine oil consumption found to be a result ofany condition(s) other than those specifically described in this bulletin.This condition must be verified during an inspection and when determined necessary, an oil consumption test performed by an authorized Subaru retailer. SOA will inform vehicle owners this condition may exist via a customer letter.

an engine vibration felt when at idle after the engine is up to operating temperature. In some cases, the above engine misfire DTCs may also result causing the Check Engine light to illuminate in error.

assembly to determine whether or not replacement is necessary. Read through and understand this information completely before proceeding with any repairs to the cylinder block. All Models with FA and FB Engines, 2011MY and Later.

The turbocharger air intake duct on affected vehicles may have been produced with incorrect material that is susceptible to cracking.

Recently SOA has become aware of some retailer questions regarding the VIN breakpoint information supplied as part of the class action notice.

Subaru of America, Inc. has determined that vehicles affected by this Service Program require ECM reprogramming. This bulletin includes the service procedure for diagnosis and repair of customer concerns involving engine idle roughness or, in some cases, engine noise and/or damage resulting from spark knock (pre-ignition). The Engine Control Module logic has also been optimized requiring the ECM reprogramming.

is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicles to 8 years / 100,000 miles from the original warranty start date.

is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicles to 8 years / 100,000 miles from the original warranty start date.

The repair procedure will involve inspecting and possibly replacing the turbocharger air intake duct. Inspection of the turbocharger air intake duct lot number (date) molded on the duct will be necessary to determine if replacement is required.

Owner Notification: All potentially affected vehicle owners will be notified by first class mail on or around April 15, 2016. As previously announced on March 17, 2016, Subaru of America, Inc. (Subaru) is recalling certain 2015 and 2016 model year Forester 2.0XT and WRX vehicles due to a possible issue with the turbocharger air intake duct.

This Service Information Bulletin announces design changes to the engine?s knock sensor which will help improve vehicle assembly line efficiency and increase durability. In some cases, the Check Engine light may illuminate and a knock sensor-related DTC set in the ECM memory: P0327, P0328, P0332 and P0333.

This bulletin announces availability of a special turbocharger air intake duct designed to prevent EXTREMELY RARE occurrence of ice formation from condensation in the duct?s PCV system passages.

This Service Information Bulletin announces design changes to the engine?s knock sensor which will help improve vehicle assembly line efficiency and increase durability. In some cases, the Check Engine light may illuminate and a knock sensor-related DTC set in the ECM memory: P0327, P0328, P0332 and P0333.

This bulletin announces availability of a special turbocharger air intake duct designed to prevent EXTREMELY RARE occurrences of ice formation from condensation in the duct?s PCV system passages.

2.0L DI Turbo models only. This bulletin announces the availability of reprogramming files to optimize the ECM. These files will address customer concerns of a slight surging / decrease in engine power condition on light acceleration during high ambient temperatures.

2.0L NA CVT, 2014-15 Crosstrek Hybrid CVT 2014-15 Forester 2.5L NA CVT 2014-15 Forester 2.0L Turbo CVT 2015 WRX 2.0L Turbo models only. In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model years from the original five (5) years or sixty thousand (60,000) miles (whichever comes first) to ten (10) years or one-hundred thousand (100,000) miles (whichever comes first). This change is not in response to any specific condition, rather it is to provide customers with added assurance regarding the function and overall performance of their CVT. Additionally, vehicles which are more than ten (10) years old or beyond one-hundred thousand (100,000) miles at the time customer notification letters are mailed are being offered additional coverage for a period of one-year from the date of the customer notification letters. For these vehicles, retailers must contact Subaru Claims Helpline prior to claims submission at 1-866-SUBARU2 (1-866-782-2782)

?ON? within one minute after the first time the ignition is turned ?OFF?, it becomes possible for the CEL to illuminate storing DTC P0606 in memory. The code will not occur immediately, but may occur after a period of time depending upon how the vehicle is operated

customer concerns of the green Hill Holder light blinking and cancel warning alarm sounding during cranking / starting the engine

Forester (Manual Transmissions Only), with 2.5L FB Engines, 2012-13 MY Impreza and XV Crosstrek Models with 2.0 FB Engines, 2014-15 MY Impreza and XV Crosstrek Models (Manual Transmissions Only) with 2.0 FB Engine As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicles to 8 years / 100,000 miles from the original warranty start date. This Warranty Extension will not cover any excessive engine oil consumption found to be a result of any condition(s) other than those specifically described in this bulletin

has determined that vehicles affected by this Service Program require ECM reprogramming. This bulletin includes the service procedure for diagnosis and repair of customer concerns involving engine idle roughness or, in some cases, engine noise and/or damage resulting from spark knock (pre-ignition). The Engine Control Module logic has also been optimized requiring the ECM reprogramming. The new logic optimizes the ECM for control of the following parameters: * Change to Fuel Cut control when fuel level is extremely low / near empty * Change to improve idle smoothness / quality * Change to boost pressure control under wide-open throttle (WOT) conditions. Under certain high engine load driving conditions, spark knock can occur which results in elevated cylinder temperatures and pressures. Over time, excessive erosion of the spark plugs and possible damage to the pistons can be consequences of continued operation with these conditions present.

Forester Turbo and applicable WRX models. The engine management system is equipped with a back-up memory. When disconnecting the battery cables, this back-up memory is cleared. On Forester Turbo and applicable WRX models, after re-connecting the battery, if the ignition switch is turned back ?ON? within one minute after the first time the ignition is turned ?OFF?, it becomes possible for the CEL to illuminate storing DTC P0606 in memory. The code will not occur immediately, but may occur after a period of time depending upon how the vehicle is operated.

which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness connector portion of the valve. If oil seeps into the connector, over time, the Check Engine lamp may illuminate and set various AVCS-related DTCs.

As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicles to 8 years / 100,000 miles from the original warranty start date. This Warranty Extension will not cover any excessive engine oil consumption found to be a result of any condition(s) other than those specifically described in this bulletin. This condition must be verified during an inspection and when determined necessary, an oil consumption test performed by an authorized Subaru retailer. SOA will inform vehicle owners this condition may exist via a customer letter. For vehicles within the coverage guidelines listed in this bulletin, customers can schedule an inspection appointment with an authorized Subaru retailer. IMPORTANT: ALWAYS perform a Vehicle Coverage Inquiry on Subarunet to determine eligibility for this Warranty Extension before proceeding. The VIN should also be checked for any open campaigns or recalls at this time.

These new files will address customer concerns of: ? Spark knock (ping) during high intake air temperature operation ? Surge on acceleration due to phantom knock detection ? Check Engine light illumination resulting from DTC P2270 and / or DTC P2270 and / or P0137 being stored in the ECM memory.

Subaru of America, Inc. has determined that vehicles affected by this Service Program require ECM reprogramming. This bulletin includes the service procedure for diagnosis and repair of customer concerns involving engine idle roughness or, in some cases, engine noise and/or damage resulting from spark knock (pre-ignition). The Engine Control Module logic has also been optimized requiring the ECM reprogramming. The new logic optimizes the ECM for control of the following parameters: ? Change to Fuel Cut control when fuel level is extremely low / near empty ? Change to improve idle smoothness / quality ? Change to boost pressure control under wide-open throttle (WOT) conditions. Under certain high engine load driving conditions, spark knock can occur which results in elevated cylinder temperatures and pressures. Over time, excessive erosion of the spark plugs and possible damage to the pistons can be consequences of continued operation with these conditions present.

Forester (Manual Transmissions Only) with 2.5L FB Engines - 2012-13 MY Impreza and XV Crosstrek Models with 2.0 FB Engines - 2014-15 MY Impreza and XV Crosstrek Models (Manual Transmissions Only) with 2.0 FB Engines. As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicles to 8 years / 100,000 miles from the original warranty start date. This Warranty Extension will not cover any excessive engine oil consumption found to be a result of any condition(s) other than those specifically described in this bulletin. This condition must be verified during an inspection and when determined necessary, an oil consumption test performed by an authorized Subaru retailer. SOA will inform vehicle owners this condition may exist via a customer letter. For vehicles within the coverage guidelines listed in this bulletin, customers can schedule an inspection appointment with an authorized Subaru retailer.

customer concern: ? Rough idle after a warm engine restart. In rare cases, DTC P0300 may also be stored.

regarding a major change to the repair procedures previously outlined in Service Bulletins 02-143-13R, 02-144-13R and 02-145-13R.

has initiated a Service Program to reprogram the Engine Control Module (ECM) on certain 2015 model year WRX vehicles and certain 2014 and 2015 model year 2.0XT Forester vehicles equipped with a 2.0 liter turbocharged engine, to address a possible pre?ignition issue.

Subaru of America, Inc. has determined that vehicles affected by this Service Program require ECM reprogramming. This bulletin includes the service procedure for diagnosis and repair of customer concerns involving engine idle roughness or, in some cases, engine noise and/or damage resulting from spark knock (pre-ignition). The Engine Control Module logic has also been optimized requiring the ECM reprogramming.

customer concerns of a slipping belt (squeal or chirping) sound.

There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become displaced resulting in engine oil seepage. Revisions made to the upper oil pan casting: * The mating flange thickness of the casting in the area identified as the cause for the seepage has been increased by 5.5mm. (See images provided in the Parts Information section below.) This thickness increase creates the need for a longer bolt to provide proper tightening and retention. * An additional mounting point has been added to the ribbing inside the casting to increase retention of the steel baffle plate and eliminate vibration.

These files will address customer concerns of a slight surging / decrease in engine power condition between approx. 2000-2500 RPM on light acceleration during high ambient temperatures (intake air temperatures exceeding 104 deg. F).

There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become displaced resulting in engine oil seepage.

BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PISTON RINGS TO ADDRESS VERIFIED CONCERNS OF UNUSUAL ENGINE OIL CONSUMPTION. VEHICLES CONFIRMED AS HAVING THIS CONDITION WHICH ARE WITHIN THE SUPPLIED VIN RANGES WILL NO LONGER BE REPAIRED WITH PISTON RING REPLACEMENT. THE REVISED REPAIR PROCEDURE TO ADDRESS VERIFIED UNUSUAL OIL CONSUMPTION CONCERNS ON THESE SPECIFIC VEHICLES WILL CONSIST OF REPLACING THE ENGINE SHORT BLOCK ASSEMBLY.

BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PISTON RINGS TO ADDRESS VERIFIED CONCERNS OF UNUSUAL ENGINE OIL CONSUMPTION. VEHICLES CONFIRMED AS HAVING THIS CONDITION WHICH ARE WITHIN THE SUPPLIED VIN RANGES WILL NO LONGER BE REPAIRED WITH PISTON RING REPLACEMENT. THE REVISED REPAIR PROCEDURE TO ADDRESS VERIFIED UNUSUAL OIL CONSUMPTION CONCERNS ON THESE SPECIFIC VEHICLES WILL CONSIST OF REPLACING THE ENGINE SHORT BLOCK ASSEMBLY.

BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PISTON RINGS TO ADDRESS VERIFIED CONCERNS OF UNUSUAL ENGINE OIL CONSUMPTION. VEHICLES CONFIRMED AS HAVING THIS CONDITION WHICH ARE WITHIN THE SUPPLIED VIN RANGES WILL NO LONGER BE REPAIRED WITH PISTON RING REPLACEMENT. THE REVISED REPAIR PROCEDURE TO ADDRESS VERIFIED UNUSUAL OIL CONSUMPTION CONCERNS ON THESE SPECIFIC VEHICLES WILL CONSIST OF REPLACING THE ENGINE SHORT BLOCK ASSEMBLY.

(MODEL TR580) WHEN SHIFTING INTO REVERSE OR DRIVE FROM NEUTRAL. ALL 2013-16MY, 4-CYLINDER, N/A MODELS WITH CVT

WHENEVER REPLACEMENT OF EITHER OF THESE COMPONENTS IS REQUIRED, THE IDENTIFICATION PROCEDURE PROVIDED BELOW MUST BE FOLLOWED TO INSURE THE PROPER PARTS ARE ORDERED AND INSTALLED AS A SET.

FOR ENGINE OIL LEVEL DETECTION IN THE EVENT OF FALSE OR PREMATURE LOW ENGINE OIL LEVEL WARNING LAMP ILLUMINATION. REVISED TO INCREASE ENGINE OIL QUANTITIES.

BEFORE THE ENGINE STARTS.

(ONLY), THE NEW CID FOR THE LATEST PAK FILES DISPLAYS INCORRECTLY AS SHOWN BELOW. THE ACTUAL NEW CID SHOULD READ AS LF61700B AS SHOWN WHEN THE SEARCH IS PERFORMED USING THE VEHICLE CID#. REGARDLESS OF HOW THE PAK FILE IS SEARCHED, THE CORRECT FILE IS APPLIED BY FLASHWRITE IN BOTH CASES. IF THE ECM IS CHECKED FOLLOWING PROGRAMMING, THE NEW CID LF61700B WILL BE FOUND AS LONG AS FLASHWRITE (RELEASE MONTH JAN 2016) IS USED FOR THIS APPLICATION. THIS DISPLAY ERROR WILL BE CORRECTED AS PART OF A FUTURE RELEASE OF SSM4/ FLASHWRITE. FIG 1- NEW CID DISPLAYS INCORRECTLY WHEN SEARCHED BY VEHICLE SPECIFICATION"

CUSTOMER CONCERN: ROUGH IDLE AFTER A WARM ENGINE RESTART. IN RARE CASES, DTC P0300 MAY ALSO BE STORED."

(ONLY), THE NEW CID FOR THE LATEST PAK FILES DISPLAYS INCORRECTLY AS SHOWN BELOW. THE ACTUAL NEW CID SHOULD READ AS LF61700B AS SHOWN WHEN THE SEARCH IS PERFORMED USING THE VEHICLE CID#. REGARDLESS OF HOW THE PAK FILE IS SEARCHED, THE CORRECT FILE IS APPLIED BY FLASHWRITE IN BOTH CASES. IF THE ECM IS CHECKED FOLLOWING PROGRAMMING, THE NEW CID LF61700B WILL BE FOUND AS LONG AS FLASHWRITE (RELEASE MONTH JAN 2016) IS USED FOR THIS APPLICATION. THIS DISPLAY ERROR WILL BE CORRECTED AS PART OF A FUTURE RELEASE OF SSM4/ FLASHWRITE. FIG 1- NEW CID DISPLAYS INCORRECTLY WHEN SEARCHED BY VEHICLE SPECIFICATION"

HAS INITIATED A SERVICE PROGRAM TO REPROGRAM THE ENGINE CONTROL MODULE (ECM) ON CERTAIN 2015 MODEL YEAR WRX VEHICLES AND CERTAIN 2014 AND 2015 MODEL YEAR 2.0XT FORESTER VEHICLES EQUIPPED WITH A 2.0 LITER TURBOCHARGED ENGINE, TO ADDRESS A POSSIBLE PRE]IGNITION ISSUE.

ARTICLES REGARDING SUBARU OF AMERICA, INC. REACHING A PROPOSED SETTLEMENT IN A CLASS ACTION LAWSUIT FOR ALLEGED OIL CONSUMPTION CONCERNS ON CERTAIN SUBARU VEHICLES. SOME MEDIA OUTLETS ALSO SUPPLIED VARYING INFORMATION ON THE CONTENTS OF THIS SETTLEMENT. THE FOLLOWING INFORMATION IS BEING PROVIDED TO YOU, OUR RETAILERS, IN ADVANCE OF ANY CUSTOMER NOTIFICATION."

REGARDING A MAJOR CHANGE TO THE REPAIR PROCEDURES PREVIOUSLY OUTLINED IN SERVICE BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R.

proper exchange procedure.

202 and / or 204 may occur preventing the process from completing successfully.

the operation of their Gen 2/Gen 3 Telematics system equipped Subaru.

proper exchange procedure.

preliminary settlement in a class action lawsuit regarding the EyeSight system in certain Subaru vehicles.

vehicle's production.

Subaru Lock Information web-site.

retailers of the SOA321152 and SOA321153 Terminal Test Kits.

preventing the process from completing successfully.

impacts the way some vehicles with accessories are sold. This regulation applies to any automobile retailer installing accessories on a vehicle prior to its first sale.

proper exchange procedure.

proper exchange procedure for 2025MY vehicles.

Subaru Lock Information web-site.

Subaru Lock Information web-site.

whichever comes first.

proper exchange procedure.

track assembliesd.

track assemblies used on the models listed.

Subaru Lock Information web-site.

The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Policies and Procedures Manual found in subarunet.

Subaru Lock Information web-site.

USB cable becoming stuck and / or difficult to remove.

Subaru Lock Information web-site.

The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Policies and Procedures Manual found in subarunet.

BELOW WHICH OCCURRED DURING PRODUCTION OF THE HEADLINER.

BELOW WHICH OCCURRED DURING PRODUCTION OF THE HEADLINER."

THE EXCHANGE PROGRAM POLICY CAN ALSO BE FOUND IN SECTIONS 8.4.9 AND 11.2.10 OF YOUR CLAIMS POLICIES AND PROCEDURES MANUAL FOUND IN SUBARUNET. 2015MY SUBARU VEHICLES

in vehicles experiencing battery drain when the ignition is off, leading to no-start conditions or frequent jump-starts.

Battery Diagnostic tool.

Telematics which are enrolled in the Subaru STARLINK Security Plus Service featuring Stolen Vehicle Recovery Plus with Immobilizer.

Module (DCM) is being tested as a dark current/standby current source.

a dark current/standby current source. All models equipped with Telematics except Solterra.

To reduce extended downtime for the customer, this bulletin announces the diagnostic and repair procedures to be used when DTC B1760 (Occupant Detection Sensor Mat). The use of WUM-98 sensor harness kit should be used in place of the cushion assembly.

(2)

in certain Subaru vehicles.

P0841- SECONDARY OIL PRESSURE SENSOR PERFORMANCE.

alternator's current output outside of the specified limits.

alternator?s current output outside of the specified limits.

(Subaru) is initiating a service program to replace the rear coil springs on certain 2014-2016 model year Forester vehicles.

(Subaru) is initiating a service program to replace the rear coil springs on certain 2014-2016 model year Forester vehicles.

(Subaru) is recalling certain 2015-2018 model year Forester vehicles to replace the passenger-side front airbag Occupant Detection System (ODS) harness. A total of 366,282 U.S. vehicles will be affected by this recall.

complete all remaining repairs for this recall.

(Subaru) is initiating a service program to replace the rear coil springs on certain 2014-2016 model year Forester vehicles.

the models listed.

(Subaru) is initiating a service program to replace the rear coil springs on certain 2014-2016 model year Forester vehicles.

(subaru) is initiating a service program to replace the rear coil springs on certain 2014-2016 model year Forester vehicles.

Subarunet under Recalls & Campaigns. If available, seat cushions can continue to be ordered and used to satisfy the recall as well.

(Subaru) is recalling certain 2015-2018 model year Forester vehicles to replace the passenger-side front airbag Occupant Detection System (ODS) harness. A total of 366,282 U.S. vehicles will be affected by this recall.

Harness inventory (Part# 64084SG23A) is now available and must be ordered through PRIME-- Retailer order levels are on Subarnet under Recalls & Campaigns. If available, seat cushions can continue to be ordered and used to satisty the recall as well.

(Subaru) is recalling certain 2015-2018 model year Forester vehicles to replace the passenger-side front airbag Occupant Detection System (ODS) harness. A total of 366,282 U.S. vehicles will be affected by this recall.

(Subaru) is recalling certain 2015-2018 model year Forester vehicles to replace the passenger-side front airbag Occupant Detection System (ODS) harness. A total of 365,515 U.S. vehicles will be affected by this recall.

(Subaru) is recalling certain 2015-2018 model year Forester vehicles to replace the passenger-side front airbag Occupant Detection System (ODS) harness. A total of 366,282 U.S. vehicles will be affected by this recall.

(Subaru) is recalling certain 2015-2018 model year Forester vehicles to replace the passenger-side front airbag Occupant Detection System (ODS) harness. A total of 355,151 U.S. vehicles will be affected by this recall.

The number of wiring checks found in Step 9 has been reduced from six to three as shown in the illustration below. The Service Manual will be updated with these revisions in the near future.

The new logic provides enhanced ignition timing control during Exhaust Gas Recirculation (EGR) operation.

These new EPS control modules address a limited number of customer concerns regarding increased steering effort which may occur during freezing temperatures after a cold start. The cause has been identified as a frozen relay contact inside the control module. Illumination of the EPS warning lamp can also occur and a DTC C2532 may be stored.

generating popping, clicking or creaking sounds when the body is in a ?twisting? condition. This can occur while driving on rough, irregular or uneven road surfaces or even during lowspeed maneuvers such as pulling into or backing out of a driveway. Production information and field reports received indicate where multiple layers of the vehicle?s body structure are spot-welded together, primarily in the ?D?-pillar and rear gate opening areas, a ?stick-slip? condition can occur between the layers and cause these types of sounds to occur. Service information has been released previously describing similar conditions which involved accessing and then punching or separating the layers of metal and applying a lubricant to prevent recurrence. Those same techniques may also provide good results on these vehicles too but, in some cases, a Body Shop repair may be required.

B1650- ?Occupant Classification System Malfunction?. This DTC may also be accompanied by B1760, B1761, B1771 or B1795 as found in the Occupant Detection control module. The new procedure is designed to help avoid unnecessary part (seat cushion assembly) replacements.

Both of these relays are located on the back (front facing) side of the passenger compartment fuse box (F/B).

B1650-?Occupant Classification System Malfunction?. This DTC may also be accompanied by B1760, B1761, B1771 or B1795 as found in the Occupant Detection control module. The new procedure is designed to help avoid unnecessary part (seat cushion assembly) replacements.

This information replaces the current procedure until the Service Manual is updated in the near future. DTC B1760 may set if liquid inadvertently spilled onto the seat cushion (or rain water entering from a window left open) penetrates the upholstery and reaches the sensor mat. This DTC can also set under high humidity conditions.

B1650- ?Occupant Classification System Malfunction?. This DTC may also be accompanied by B1760, B1761, B1771 or B1795 as found in the Occupant Detection control module. The new procedure is designed to help avoid unnecessary part (seat cushion assembly) replacements.

Sensor Mat Abnormal and/or B1650- Occupant Classification System Malfunction. This information replaces the current procedure until the Service Manual is updated in the near future. DTC B1760 and/or B1650 may set if liquid inadvertently spilled onto the seat cushion (or rain water entering from a window left open) penetrates the upholstery and reaches the sensor mat. These DTCs can also set under high humidity conditions.

This Service Information bulletin provides precautions to use when removing the HVAC control panel to prevent damaging the blower fan speed switch. When removing the control panel, if the fan speed switch wiring harness is pulled taught or becomes stressed, the switch may be damaged. If the connector (lower) portion of the switch becomes separated from the switch body even slightly (see Fig. 1 on page 2), the HVAC control panel assembly must be replaced. The switch itself is not serviceable. The related instrument panel (IP) wiring harness must also be inspected and replaced if any damage is confirmed. NOTE: For 2012MY Impreza, see TSB 10-78-12, dated 4/18/2012.

This bulletin provides a procedure for diagnosis and repair of DTC P0300 which may result from fluctuation of the alternator?s current output outside of the specified limits.

fluctuation of the alternator's current output outside of the specified limits.

There have been a limited number of cases with reports describing the blower fan speed fluctuating / changing without input from the customer when the blower is set to maximum speed.

Sensor Mat Abnormal and/or B1650- Occupant Classification System Malfunction. This information replaces the current procedure until the Service Manual is updated in the near future. DTC B1760 and/or B1650 may set if liquid inadvertently spilled onto the seat cushion (or rain water entering from a window left open) penetrates the upholstery and reaches the sensor mat. These DTCs can also set under high humidity conditions.

generating popping, clicking or creaking sounds when the body is in a "twisting" condition. This can occur while driving on rough, irregular or uneven road surfaces or even during lowspeed maneuvers such as pulling into or backing out of a driveway. Production information and field reports received indicate where multiple layers of the vehicle's body structure are spot-welded together, primarily in the "D"-pillar and rear gate opening areas, a "stick-slip" condition can occur between the layers and cause these types of sounds to occur. Service information has been released previously describing similar conditions which involved accessing and then punching or separating the layers of metal and applying a lubricant to prevent recurrence. Those same techniques may also provide good results on these vehicles too but, in some cases, a Body Shop repair may be required.

sub-level sending unit to the fuel tank. In addition, two of the caps are now used in production instead of only one. This change was made to enhance productivity during vehicle assembly.

MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. IN ADDITION, A NEW RETAINING BOLT AND TIGHTENING TORQUE SPECIFICATION ARE NOW USED TO SECURE THE MIRROR HEAD TO THE MOUNTING BASE. THIS BULLETIN PROVIDES A PROCEDURE FOR REPAIRING THE EXISTING MIRROR ASSEMBLY BY REPLACING THE THREE MOUNTING SCREWS WITH UPDATED FASTENERS. NOTE: REFER TO TSB 12-152-13 DATED 6/17/2013 FOR RELATED INFORMATION ON BRZ MODELS.

WHEN REMOVING THE CONTROL PANEL, IF THE FAN SPEED SWITCH WIRING HARNESS IS PULLED TAUGHT OR BECOMES STRESSED, THE SWITCH MAY BE DAMAGED. IF THE CONNECTOR (LOWER) PORTION OF THE SWITCH BECOMES SEPARATED FROM THE SWITCH BODY EVEN SLIGHTLY (SEE FIG. 1 ON PAGE 2), THE HVAC CONTROL PANEL ASSEMBLY MUST BE REPLACED. THE SWITCH ITSELF IS NOT SERVICEABLE. NOTE: FOR 2012MY IMPREZA, SEE TSB 10-78-12, DATED 4/18/2012.

B1500 LEADS TO REPLACEMENT OF A FAULTY MAIN AND / OR SUB FUEL LEVEL SENSOR.

THE CHANGE WAS MADE TO ENHANCE ASSEMBLY LINE EFFICIENCY.

Infotainment concerns.

The update will take place in multiple batches with the first beginneing November 15th and the last being Decemeber 3rd. This update is for approximatelt 714,000 VINs.

1.5.

Inprovement for CarPlay concerns with hands-free calls when the receiving party is not able to hear the caller.

generation.

generation.

repair of the Infotainment concerns. (Applicable to all models with Harman or Denso CP1 Infotainment).

equipped with F10 7 Navigation and 7 Display Audio head units.

may arise when operating the new-generation Gen 2 and Gen 2.1 F10 Navigation and Display Audio systems.

equipped with F10 7 Navigation and 7 Display Audio head units.

equipped with F10 7 Navigation and 7 Display Audio head units.

vehicles listed above equipped with F10 7 Navigation and 7 Display Audio head units. When the user plays a pre-recorded CD, Gracenote recognizes the disc then shows the artist and track name information along with the album cover art on the head unit display (when available). This enhancement brings the currently installed database up to date with the most recent information available. This update does not affect any album art displayed when using SXM.

vehicles listed equipped with F10 7" Navigation and 7" display audio head units.

Bluetooth pairing to be completed successfully when using voice commands on the Clarion audio units listed.

operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2" display.

vehicles listed above equipped with F10 7 Navigation and 7 Display Audio head units. When the user plays a pre-recorded CD, Gracenote recognizes the disc then shows the artist and track name information along with the album cover art on the head unit display (when available). This enhancement brings the currently installed database up to date with the most recent information available. This update does not affect any album art displayed when using SXM."

Multimedia Navigation (AVN) & Display Audio Units. This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation Gen 2 and Gen 2.1 F10 Navigation and Display Audio systems. We will continue to add more helpful tips to this TSB as they become available.

vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units.

operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.

vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units. When the user plays a pre-recorded CD, Gracenote recognizes the disc then shows the artist and track name information along with the album cover art on the head unit display (when available). This enhancement brings the currently installed database up to date with the most recent information available.

operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.

vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units. When the user plays a pre-recorded CD, Gracenote recognizes the disc then shows the artist and track name information along with the album cover art on the head unit display (when available). This enhancement brings the currently installed database up to date with the most recent information available.

operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation.

To assist with that, a new Bluetooth Interview Form is available to facilitate the completion of an exchange order. The form is available on Subarunet at Service Operations & Technical >> Forms.

Exchange order entry will now request a date and time when condition was last duplicated. The customer?s phone carrier, phone make and model will be required when Bluetooth or Connectivity failure sections are selected.

MicroSD card used in Clarion display audio units is internal and not accessible. In the event a ?Check SD Memory Card? alert message appears on the faceplate display, an exchange display audio unit must be ordered through the applicable Clarion audio exchange procedure.

?Gen 2? & ?Gen 2.1? Operating Tips. This bulletin provides information to help diagnose and address different s relating to customer concerns which may arise when operating the new-generation ?Gen 2? F10 Audio / Navigation system.

may arise when operating the new-generation ?Gen 2? and ?Gen 2.1? F10 Navigation and Display Audio systems.

operational concerns received from the field listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation. It is important to read through and understand this information completely before proceeding.

operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation.

REVISED. This bulletin announces reprogramming file availability and a corresponding installation procedure which will allow Bluetooth pairing to be completed successfully when using voice commands on the Clarion audio units listed below. Pairing of phones using voice recognition is the preferred method on these Clarion audio units. See bulletin 15-185-15 for additional details on using voice recognition to pair phones to Clarion audio units. The procedure will involve downloading the applicable update file from Subarunet then loading it onto a flash drive for installation.

This bulletin announces a new procedure for updating the operating software used in F10 Gen1 audio / navigation systems. This new procedure eliminates the need to exchange the head unit / SD card to obtain software-related updates and operating enhancements.

This new procedure eliminates the need to exchange the head unit / SD card to obtain software-related updates and operating enhancements. All 2012 to 2015 Models Equipped with FujitsuTen (F10) Generation 1 (Gen1) Audio / Navigation Systems

INVOLVING THE PAIRING AND USE OF CELLULAR PHONES WITH CLARION AUDIO UNITS. THIS INCLUDES CUSTOMER CONCERNS WHERE THE PHONE WILL NOT AUTOMATICALLY PAIR ITSELF BUT INSTEAD REQUIRES MANUAL PHONE SELECTION ON THE AUDIO UNIT TO ALLOW PAIRING TO PROCEED.

BLUETOOTH PAIRING TO BE COMPLETED SUCCESSFULLY WHEN USING VOICE COMMANDS ON THE CLARION AUDIO UNITS LISTED BELOW. PAIRING OF PHONES USING VOICE RECOGNITION IS THE PREFERRED METHOD ON THESE CLARION AUDIO UNITS. SEE BULLETIN 15-185-15 FOR ADDITIONAL DETAILS ON USING VOICE RECOGNITION TO PAIR PHONES TO CLARION AUDIO UNITS. THE PROCEDURE WILL INVOLVE DOWNLOADING THE APPLICABLE UPDATE FILE FROM SUBARUNET THEN LOADING IT ONTO A FLASH DRIVE FOR INSTALLATION."

IT IS VERY IMPORTANT TO INTERVIEW THE CUSTOMER CAREFULLY TO DETERMINE WHICH REPAIR IS REQUIRED. PLEASE READ THE SERVICE PROCEDURE PORTION OF THIS BULLETIN THOROUGHLY IN ORDER TO DETERMINE WHICH SCENARIO APPLIES AND HOW TO REPAIR THE CONDITION PROPERLY.

INVOLVING THE PAIRING AND USE OF CELLULAR PHONES WITH CLARION AUDIO UNITS. THIS INCLUDES CUSTOMER CONCERNS WHERE THE PHONE WILL NOT AUTOMATICALLY PAIR ITSELF BUT INSTEAD REQUIRES MANUAL PHONE SELECTION ON THE AUDIO UNIT TO ALLOW PAIRING TO PROCEED.

IT IS VERY IMPORTANT TO INTERVIEW THE CUSTOMER CAREFULLY TO DETERMINE WHICH REPAIR IS REQUIRED. PLEASE READ THE SERVICE PROCEDURE PORTION OF THIS BULLETIN THOROUGHLY IN ORDER TO DETERMINE WHICH SCENARIO APPLIES AND HOW TO REPAIR THE CONDITION PROPERLY.

THE EXCHANGE PROGRAM POLICY CAN ALSO BE FOUND IN SECTIONS 8.4.9 AND 11.2.10 OF YOUR CLAIMS POLICIES AND PROCEDURES MANUAL FOUND IN SUBARUNET. REVISED TO ADD POWER AMPLIFIER.

THIS NEW PROCEDURE ELIMINATES THE NEED TO EXCHANGE THE HEAD UNIT / SD CARD TO OBTAIN SOFTWARE-RELATED UPDATES AND OPERATING ENHANCEMENTS. ALL 2012 TO 2015 MODELS EQUIPPED WITH FUJITSUTEN (F10) GENERATION 1 (GEN1) AUDIO / NAVIGATION SYSTEMS

THIS NEW PROCEDURE ELIMINATES THE NEED TO EXCHANGE THE HEAD UNIT / SD CARD TO OBTAIN SOFTWARE-RELATED UPDATES AND OPERATING ENHANCEMENTS. ALL 2012 TO 2015 MODELS EQUIPPED WITH FUJITSUTEN (F10) GENERATION 1 (GEN1) AUDIO / NAVIGATION SYSTEMS

BLUETOOTH PAIRING TO BE COMPLETED SUCCESSFULLY WHEN USING VOICE COMMANDS ON THE CLARION AUDIO UNITS LISTED BELOW. PAIRING OF PHONES USING VOICE RECOGNITION IS THE PREFERRED METHOD ON THESE CLARION AUDIO UNITS. SEE BULLETIN 15-185-15 FOR ADDITIONAL DETAILS ON USING VOICE RECOGNITION TO PAIR PHONES TO CLARION AUDIO UNITS. THE PROCEDURE WILL INVOLVE DOWNLOADING THE APPLICABLE UPDATE FILE FROM SUBARUNET THEN LOADING IT ONTO A FLASH DRIVE FOR INSTALLATION."

PAIRING ANDROID SMARTPHONES TO BLUETOOTH-EQUIPPED CLARION AUDIO UNITS. THE PROCEDURE INVOLVES CHANGING THE AUDIO UNITS DEFAULT PASSKEY WHICH MUST BE ENTERED INTO THE SMARTPHONE DURING THE PAIRING PROCESS. ONCE THE PASSKEY IS CHANGED FROM 1234 TO 0000, TESTING RESULTS HAVE SHOWN THE REMAINDER OF THE PAIRING PROCESS COMPLETES NORMALLY.

(Immobilizer Key Collation Diagnosis).

center.

models.

February.

models.

models.

models.

is extending the New Car Basic Warranty coverage for the 12 Volt batteries used in the above listed models and model years beyond the original three (3) years or thirty six thousand miles (36,000), whichever comes first.

is extending the New Car Basic Warranty coverage for the 12 Volt batteries used in the above listed models and model years beyond the original three (3) years or thirty six thousand miles (36,000), whichever comes first.

Crosstrek

is extending the New Car Basic Warranty coverage for the 12 Volt batteries used in the above listed models and model years beyond the original three (3) years or thirty six thousand miles (36,000), whichever comes first.

models.

Technical Information System (STIS) web site.

Information System (STIS) web site.

models

(SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.

Technical Information System (STIS) web site.

Technical Information System (STIS) web site.

(SOA) is extending the New Car Limited Warranty for the rear gate stays on the listed models and model years.

Rear Gate Stays.

(SOA) is extending the New Car Limited Warranty for the rear gate stays on the listed models and model years. This will apply to Forester models with or without the power rear gate (PRG).

Technical Information System (STIS) web site.

expect in the coming days.

the WUM-98 ODS recall announced on October 8, 2019, Subaru of America, Inc. (SOA) is pleased to provide financial assistance during the time repairs are unavailable.

(SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.

Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for becoming aware of the latest changes. We advise you to always refer to the STIS web site when looking for the latest Service information.

Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for becoming aware of the latest changes.

Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for becoming aware of the latest changes.

to increase durability

TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE.

THIS PROGRAM EXTENDS WARRANTY COVERAGE FOR DASHBOARDS ON ALL 2005-2009 SUBARU OUTBACK AND SUBARU LEGACY VEHICLES SOLD OR LEASED IN THE UNITED STATES. THIS CHANGE IS IN ANTICIPATION THAT A SMALL NUMBER OF VEHICLES MAY REQUIRE REPAIRS FOR STICKY AND/OR MELTED DASHBOARDS AS A RESULT OF EXPOSURE TO HEAT OR HUMIDITY. PLEASE NOTE THAT THIS IS NOT A RECALL, AS IT DOES NOT IMPACT VEHICLE SAFETY. IF A DASHBOARD HAS NOT MELTED OR BECOME STICKY AS A RESULT OF EXPOSURE TO HEAT OR HUMIDITY, NO REPAIR IS NECESSARY UNDER THE TERMS OF THIS WARRANTY EXTENSION. PLEASE NOTE THE FOLLOWING IMPORTANT DETAILS REGARDING THIS PROGRAM, AND REVIEW THEM WITH ALL APPROPRIATE PERSONNEL. "

from the CVT assembly.

available.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park.

high-pitched sound coming from the transmission extension housing area.

certain CVT solenoid related DTCs as listed.

not being able to remove the key from the ignition switch when the vehicle is in Park.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park.

(SOA) is announcing an extension to the Basic New Car Limited Warranty for the CVT Parking Switch for certain 2015-2018 MY Legacy, Outback, 2012-2018 MY Impreza, 2013-2018 MY Crosstrek, 2015-2018 MY WRX and 2014-2018MY Forester vehicles.

extension to the Basic New Car Limited Warranty for your vehicles CVT Parking Brake Switch.

from the CVT assembly.

(SOA) is announcingan extension to the Basic New Car Limited Warranty for the Electronic Power Steering (EPS) GearBox Assembly for certain 2012-2018 MY vehicles.

Basic New Car Limited Warranty for your vehicles Electronic Power Steering Gear Box Assembly.

(SOA) is announcing an extension to the Basic New Car Limited Warranty for the Electronic Power Steering Gear Box Assembly for certain 2012-2018 MY vehicles.

(SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model years from the original five (5) years or sixty thousand (60,000) miles (whichever comes first) to ten (10) years or one-hundred thousand (100,000) miles (whichever comes first).

from the CVT assembly.

related DTCs.

isolated customer concerns of a rattling / vibration -type sound from the shift knob. The sound is primarily reported while driving in 4th gear between 1900 and 2500 rpm.

Investigation has identified likely sources of the seepage to be the sealant used on the CVTs oil pump chain cover and the input shaft oil seal. The repair involves chain cover removal, a thorough cleaning and inspection of the sealing surfaces followed by re-sealing the cover and replacement of the input shaft oil seal with the new, redesigned type.

Investigation has identified likely sources of the seepage to be the sealant used on the CVTs oil pump chain cover and the input shaft oil seal. The repair involves chain cover removal, a thorough cleaning and inspection of the sealing surfaces followed by re-sealing the cover and replacement of the input shaft oil seal with the new, redesigned type"

-type sound heard or felt when making sharp turns. If an applicable vehicle presents with the condition as described, it is recommended to perform the transfer clutch break-in procedure as described.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contamination of the Park-Range switch internal components.

Investigation has identified a likely source of the seepage to be the sealant used on the CVT?s oil pump chain cover. The repair involves removal, a thorough cleaning and inspection of the sealing surfaces followed by re-sealing the cover.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contamination of the Park-Range switch internal components.

During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases where the operator keeps a foot on the clutch pedal for extended periods, an increased amount of heat is generated which can cause the grease inside the bearing to deteriorate. In a case of prolonged clutch pedal application, seizure of the bearing can occur with potential damage to other related components.

During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases where the operator keeps a foot on the clutch pedal for extended periods, an increased amount of heat is generated which can cause the grease inside the bearing to deteriorate. In a case of prolonged clutch pedal application, seizure of the bearing can occur with potential damage to other related components.

VERY limited number of customer concerns regarding uneven steering effort felt when turning left or right. In areas where high concentrations of road salt are used to melt ice and snow, corrosion may develop and cause a portion of the gear box housing to crack if the vehicle were to suffer a large enough impact from hitting a pothole or similar type of road hazard.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contamination of the Park-Range switch internal components.

concerns of the system not operating. Electrical windings located inside the clutch assembly have been changed to eliminate the condition. The service procedure will involve replacement of the A/C compressor and clutch as a complete assembly.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contamination of the Park-Range switch internal components

(SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model years from the original five (5) years or sixty thousand (60,000) miles (whichever comes first) to ten (10) years or one-hundred thousand (100,000) miles (whichever comes first). This change is not in response to any specific condition, rather it is to provide customers with added assurance regarding the function and overall performance of their CVT. Additionally, vehicles which are more than ten (10) years old or beyond one-hundred thousand (100,000) miles at the time customer notification letters are mailed are being offered additional coverage for a period of one-year from the date of the customer notification letters.

concerns of the system not operating. Electrical windings located inside the clutch assembly have been changed to eliminate the condition. The service procedure will involve replacement of the A/C compressor and clutch as a complete assembly.

(SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model years from the original five (5) years or sixty thousand (60,000) miles (whichever comes first) to ten (10) years or one-hundred thousand (100,000) miles (whichever comes first). This change is not in response to any specific condition, rather it is to provide customers with added assurance regarding the function and overall performance of their CVT. Additionally, vehicles which are more than ten (10) years old or beyond one-hundred thousand (100,000) miles at the time customer notification letters are mailed are being offered additional coverage for a period of one-year from the date of the customer notification letters. A copy of the customer letter is attached to this bulletin as reference.

This Service Information bulletin provides a new flow chart and additional diagnostic tools to assist Technicians with troubleshooting DTC P0841- SECONDARY OIL PRESSURE SENSOR PERFORMANCE.

Investigation has identified a likely source of the seepage to be the sealant used on the CVT's oil pump chain cover. The repair involves removal, a thorough cleaning and inspection of the sealing surfaces followed by re-sealing the cover.

This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified a likely source of the seepage to be the sealant used on the CVT's oil pump chain cover. The repair involves removal, a thorough cleaning and inspection of the sealing surfaces followed by re-sealing the cover.

HAS EXTENDED THE AVAILABILITY OF REMANUFACTURED CVT TRANSMISSIONS TO INCLUDE CROSSTREK, FORESTER AND IMPREZA APPLICATIONS. PLEASE CHECK APPLICATIONS AND AVAILABILITY THROUGH NORMAL PARTS CHANNELS PRIOR TO MAKING VEHICLE REPAIRS. RETAILERS ARE REQUIRED TO USE A REMANUFACTURED UNIT FOR ALL REPAIRS REIMBURSED BY SUBARU THAT REQUIRE A MAJOR REPAIR OR REPLACEMENT, EXCEPT IN THE CASE OF A NEW AND IN-STOCK VEHICLE.

exposure to pollen on painted surfaces on vehicles imported from Japan. This bulletin does not apply to SIA built vehicles.

The design changes provide the bolt with an increased durability against rust.

concerns: Power windows inoperative from the drivers door master and / or passenger front door switch Unable to remotely operate other door windows from the drivers door master switch One-Touch Auto Up / Down features inoperative from either / both front door switches"

concerns: ? Power windows inoperative from the driver?s door master and / or passenger front door switch ? Unable to remotely operate other door windows from the driver?s door master switch ? One-Touch Auto Up / Down features inoperative from either / both front door switches

The new part number is F551SAN010. The change was made to address concerns regarding the ?mushroom? anchors either pulling out of the trim panel and or gapping visibly at the base of the anchor between the black plastic spacer and trim panel.

retention and prevent water intrusion into the converter case.

the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There is a latch to keep the glove box closed on both sides of the glove box door. If the door is closed without using enough force to engage both latches or by pushing it shut on just one side instead of in the middle, one may close and not the other. Over time, if the door is not fully closed with both latches, high cabin temperatures along with weight of the items inside the glove box may cause the assembly to deform slightly and a gap to develop.

the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There is a latch to keep the glove box closed on both sides of the glove box door. If the door is closed without using enough force to engage both latches or by pushing it shut on just one side instead of in the middle, one may close and not the other. Over time, if the door is not fully closed with both latches, high cabin temperatures along with weight of the items inside the glove box may cause the assembly to deform slightly and a gap to develop.

The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with the windows fully closed. The vent grilles have rubber ?shutters? which occasionally, may catch on the frame (case) portion and not close properly allowing outside air / odor to enter the cabin.

In some cases, when exiting the vehicle, the trim panel may inadvertently get kicked and become dislodged from the seat cushion assembly. The shape of the front portion of the panel has been changed to prevent this condition.

of fogging or condensation accumulating on the inside surface of the lens. Six additional breathing holes have been added to the body of the lamp assembly. The additional holes are intended to provide additional ventilation and prevent fogging which may result when severe ambient temperature changes occur. NOTE: Fogging is a natural phenomenon and not a defect or malfunction.

The change was made to address customer concerns of the front door glass shuddering while opening or closing. Moisture accumulation in the run channels can cause a stick-slip / vibration condition as the glass goes up and down resulting in the shudder.

dent which may be noticeable in the roof trim panel (head liner) over the front, center portion of the cargo area.

THIS BULLETIN ANNOUNCES A CHANGE TO THE PAINT MATERIAL TO ELIMINATE THE CONDITION AND INSTRUCTIONS FOR ORDERING THE REPLACEMENT PARTS.

OF FOGGING OR CONDENSATION ACCUMULATING ON THE INSIDE SURFACE OF THE LENS. SIX ADDITIONAL BREATHING HOLES HAVE BEEN ADDED TO THE BODY OF THE LAMP ASSEMBLY. THE ADDITIONAL HOLES ARE INTENDED TO PROVIDE ADDITIONAL VENTILATION AND PREVENT FOGGING WHICH MAY RESULT WHEN SEVERE AMBIENT TEMPERATURE CHANGES OCCUR. NOTE: FOGGING IS A NATURAL PHENOMENON AND NOT A DEFECT OR MALFUNCTION.

THE LOWER PORTION OF THE A PILLAR TRIM WHILE DRIVING OVER BUMPY OR ROUGH ROAD SURFACES. THE LOWER INSERTION CLAWS AND / OR THE TRIMS SUPPORT RIB MAY BE COMING IN CONTACT WITH THE VEHICLE BODY CAUSING THE SOUND.

THE LOWER PORTION OF THE A PILLAR TRIM WHILE DRIVING OVER BUMPY OR ROUGH ROAD SURFACES. THE LOWER INSERTION CLAWS AND / OR THE TRIMS SUPPORT RIB MAY BE COMING IN CONTACT WITH THE VEHICLE BODY CAUSING THE SOUND.

(SOA) is extending the New Car Limited Warranty coverage in the models listed. The extension will address instances of phantom braking or the EyeSight/RAB systems causing unnecessary stoppage/slowing of the vehicle.

(SOA) is extending the New Car Limited Warranty coverage in the models listed for the selected EyeSight & Reverse Automatic Braking (RAB) components.

applying additional anti-corrosion material to the four-way (2-2 way) joint connector area of the brake line system on Forester, Impreza, WRX, and STI vehicles previously repaired under the WQK-47 (14V-311) brake line corrosion recall prior to the December 23, 2014 WQK-47 recall bulletin revision. The revisions to the bulletin are for part number changes.

This information has been developed to reduce unnecessary brake caliper replacement.

customer concerns of a squeaking or squealing sound on the models listed above.

(Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall."

Under certain circumstances, some customers may have a concern regarding a howling-type sound from the rear of the vehicle later diagnosed as a faulty hub / bearing assembly. Unevenness of the backing plate surfaces may affect the concentricity (roundness) of the hub / bearing after torqued during assembly and over time, cause the howling -type sound to develop. Production changes for the backing plates have been implemented to optimize their mounting surface quality.

customer concerns of excessive brake squeal. This new kit eliminates the slotted shim which previously was installed between the rubber-coated outer shim and the brake pad.

This will prevent the pad from dragging due to corrosion buildup which may result in uneven or premature wear of the replacement brake pads. This additional instruction applies to all models with brake pads using the upper and lower pad clips and has been added to the brake pad installation procedures found in the related Service Manuals.

allow retailers to place orders for single tools.

(Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.

(Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.

(Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.

customer concerns of a squeaking or squealing sound on the models listed. The new shims incorporate a new laminated design with increased damping characteristics to eliminate vibration identified as the root cause of the sound. The new kits include shims only (NO brake pads).

This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated into the airbag system. The function of the EDR is best explained using the following statements found in the vehicle Owner?s Manual: ?This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations such as an airbag deployment or hitting a road obstacle, data that will assist in the understanding how a vehicle?s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as: ? How various systems in your vehicle were operating; ? Whether or not the driver and passenger safety belts were buckled/fastened; ? How far (if at all) the driver was depressing the accelerator and/or brake pedal; ? How fast the vehicle was traveling. This data can help provide a better understanding of the circumstances in which crashes and injuries occur.

This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for other purposes in the area around the switch, a non-conductive coating may develop over time on the internal electrical contacts and affect operation of the switch. On / Off signal output from the BLS is critical for proper operation of various systems on the vehicle. When the switch does not operate properly, warning lamps illuminate and DTCs are stored. A table with BLS-related DTCs and additional information is provided in the Service Procedure information. A photo of the switch changes is shown below. This bulletin also provides a diagnostic and adjustment procedure to be used when diagnosing brake light switch-related DTCs.

the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for other purposes in the area around the switch, a non-conductive coating may develop over time on the internal electrical contacts and affect operation of the switch. On / Off signal output from the BLS is critical for proper operation of various systems on the vehicle. When the switch does not operate properly, warning lamps illuminate and DTCs are stored. A table with BLS-related DTCs and additional information is provided in the Service Procedure information. A photo of the switch changes is shown below. This bulletin also provides a diagnostic and adjustment procedure to be used when diagnosing brake light switch-related DTCs.

illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for other purposes in the area around the switch, a non-conductive coating may develop over time on the internal electrical contacts and affect operation of the switch. On / Off signal output from the BLS is critical for proper operation of various systems on the vehicle. When the switch does not operate properly, warning lamps illuminate and DTCs are stored. A table with BLS-related DTCs and additional information is provided in the Service Procedure information. A photo of the switch changes is shown below. This bulletin also provides a diagnostic and adjustment procedure to be used when diagnosing brake light switch-related DTCs.

CUSTOMER CONCERNS OF EXCESSIVE BRAKE SQUEAL. THIS NEW KIT ELIMINATES THE SLOTTED SHIM WHICH PREVIOUSLY WAS INSTALLED BETWEEN THE RUBBER-COATED OUTER SHIM AND THE BRAKE PAD.

CUSTOMER CONCERNS OF EXCESSIVE BRAKE SQUEAL. THIS NEW KIT ELIMINATES THE SLOTTED SHIM WHICH PREVIOUSLY WAS INSTALLED BETWEEN THE RUBBER-COATED OUTER SHIM AND THE BRAKE PAD.

IF THE BLS IS OUT OF ADJUSTMENT, THE ABS AND/OR VDC WARNING LAMP MAY ILLUMINATE.

interface firmware has been updated.

will release an OTA to perform a software update to the DCM. This is a preventive OTA.

Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for becoming aware of the latest changes. We advise you to always refer to the STIS web site when looking for the latest Service information. Printed pages will not be made available to update printed Service Manuals.

Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for becoming aware of the latest changes. We advise you to always refer to the STIS web site when looking for the latest Service information. Printed pages will not be made available to update printed Service Manuals.

TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BECOMING AWARE OF THE LATEST CHANGES. WE ADVISE YOU TO ALWAYS REFER TO THE STIS WEB SITE WHEN LOOKING FOR THE LATEST SERVICE INFORMATION. PRINTED PAGES WILL NOT BE MADE AVAILABLE TO UPDATE PRINTED SERVICE MANUALS. PAPER MANUALS MAY HAVE DIFFERENT PAGE NUMBERING THEN WHAT IS REFLECTED BELOW, BASED ON MULTIPLE NEW AND REVISED PAGES. PLEASE REFER TO THE INFORMATION CONTAINED ON THE STIS WEB SITE FOR ALL FUTURE, UPDATE SERVICE MANUAL INFORMATION.

TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BECOMING AWARE OF THE LATEST CHANGES. WE ADVISE YOU TO ALWAYS REFER TO THE STIS WEB SITE WHEN LOOKING FOR THE LATEST SERVICE INFORMATION. PRINTED PAGES WILL NOT BE MADE AVAILABLE TO UPDATE PRINTED SERVICE MANUALS.

seat belt buckle assembly attaches to the seat frame.

seat belt buckle assembly attaches to the seat frame.

seat belt buckle assembly attaches to the seat frame.

seat belt buckle assembly attaches to the seat frame.

seat belt buckle assembly attaches to the seat frame.

seat belt buckle assembly attaches to the seat frame.

the airbag system.

the airbag system.

Subaru of America, Inc. is pleased to announce immediate availbilty and release of current stock of Forester seat cushions.

the airbag system.

retailer-installed accessory exeeds 1.5 percent of the GVWR or 100 pounds, which ever is lower.

combination lamps, where moisture and or condensation may develop on the inside of the lamp lenses.

An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s warning lamp to illuminate.

An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed to set and result in the related system?s warning lamp to illuminate.

on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin identifies the equipment required to initialize (reset) the immobilizer code and cut the key blanks, for both immobilizer and non-immobilizer type keys. Subaru of America began using immobilizer systems in some 2005MY vehicles (please refer to Immobilizer Chart for more detailed information).

An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s warning lamp to illuminate.

NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH COULD AFFECT OPERATION OR CAUSE IMPROPER ILLUMINATION OF THE OIL PRESSURE WARNING LAMP. A SMALL PILOT PORTION WAS ADDED TO THE THREADED AREA ON P.N. 25240KA051 AS SHOWN IN THE ILLUSTRATION BELOW. REVISED PRODUCTION CHANGE INFORMATION."

NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH COULD AFFECT OPERATION OR CAUSE IMPROPER ILLUMINATION OF THE OIL PRESSURE WARNING LAMP. A SMALL PILOT PORTION WAS ADDED TO THE THREADED AREA ON P.N. 25240KA051 AS SHOWN IN THE ILLUSTRATION BELOW."

INTERMITTENT OPERATION OF THE HILL START ASSIST WARNING LAMP.

concerns possibly resulting from an undetected A/C refrigerant leak.

concerns possibly resulting from an undetected A/C refrigerant leak.

concerns possibly resulting from an undetected A/C refrigerant leak. To improve Fixed Right First-Time (FRFT) and customer satisfaction, SOA is introducing a new procedure and fail code for first-time suspected A/C refrigerant leaks for cases when a Technician is unable to find the source of the leak or believes there was a potential factory under charge of the A/C system refrigerant."

(A/C) performance concerns possibly resulting from an undetected A/C refrigerant leak.

concerns possibly resulting from an undetected A/C refrigerant leak. To improve Fixed Right First-Time (FRFT) and customer satisfaction, SOA is introducing a new procedure and fail code for first-time suspected A/C refrigerant leaks for cases when a Technician is unable to find the source of the leak or believes there was a potential factory under charge of the A/C system refrigerant.

defroster vent grille area of the instrument panel (IP) near the base of the windshield.

Use the supplied Service Procedure to address a customer concern involving the foam cushion becoming visible above the IP near the defroster vent outlets.

The change involves the addition of a rubber end cap and retaining clip onto the bottom of the receiver-dryer tank portion to prevent corrosion intrusion and enhance sealing.

Use the supplied Service Procedure to address a customer concern involving the foam cushion becoming visible above the IP near the defroster vent outlets

A new silicone rubber cover has been developed and incorporated into production for this purpose.

This coverage applies to all emission repairs within the warranty coverage period. Valid claims for salvage vehicles are Recalls, SAS Maintenance, and Warranty for Emission repairs only. Please make a note of this important system enhancement. Questions may be directed to the Subaru Claims helpline at 1866SUBARU2 (18667822782).

A new silicone rubber cover has been developed and incorporated into production for this purpose.

WHENEVER REPLACING THE MFD AND / OR COMBINATION METER, THE LIFETIME FUEL CONSUMPTION FUNCTION OF THE MFD MUST BE RESET FOR ACCURATE INFORMATION TO DISPLAY GOING FORWARD. IF NOT RESET, ERRONEOUS VALUES (EITHER EXTREMELY HIGH IN THE CASE OF A MFD REPLACEMENT OR EXTREMELY LOW FOR A COMBINATION METER REPLACEMENT) FOR LIFETIME FUEL CONSUMPTION WILL BE DISPLAYED. THERE IS NO WAY TO TRANSFER THE OLD / EXISTING LIFETIME FUEL CONSUMPTION RESULTS TO THE NEW MFD OR COMBINATION METER ALLOWING IT TO CONTINUE UNINTERRUPTED. AS A RESULT, AFTER REPLACEMENT OF THE MFD AND / OR COMBINATION METER, ALL CALCULATIONS WILL START FRESH FOLLOWING PERFORMANCE OF THE FOLLOWING PROCEDURES.

unnecessary bushing replacement.

resistance to imperfections resulting from shock loads.

resistance to imperfections resulting from shock loads.

popping-type sound which may be heard when making low speed turns.

DISCONNECTING OR REPLACING THE PRG ROD. THE SPRING STEEL RETAINING CLIPS (STOP RINGS) WHICH LOCK THE PRG ROD TO THE BALL STUDS (PIVOT POINTS) ON EITHER END ARE NOW ONE-TIME USE ITEMS AND MUST BE REPLACED WHENEVER THEY ARE REMOVED. IF THE STOP RINGS ARE NOT REPLACED, THE ROD MAY COME OFF THE BALL STUD DURING PRG OPERATION.

B2A20 with gen 4 Telematics.

new vehicle inventory.

new vehicle inventory wjhich must be tested and reported every 30 days.

customer concerns of a rattle-type sound and / or a possible vibration felt in the steering wheel.

customer concerns of a rattle-type sound and / or a possible vibration felt in the steering wheel. The material for the cushion portion of the front bushing has been changed.