2016 Subaru Crosstrek TSBs

Infotainment concerns.

The update will take place in multiple batches with the first beginneing November 15th and the last being Decemeber 3rd. This update is for approximatelt 714,000 VINs.

1.5.

Inprovement for CarPlay concerns with hands-free calls when the receiving party is not able to hear the caller.

generation.

generation.

repair of the Infotainment concerns. (Applicable to all models with Harman or Denso CP1 Infotainment).

equipped with F10 7 Navigation and 7 Display Audio head units.

may arise when operating the new-generation Gen 2 and Gen 2.1 F10 Navigation and Display Audio systems.

equipped with F10 7 Navigation and 7 Display Audio head units.

equipped with F10 7 Navigation and 7 Display Audio head units.

additional operational concerns received from the field and listed involving Gen 2 F10 Navigation and Display Audio units with 7 display.

vehicles listed above equipped with F10 7 Navigation and 7 Display Audio head units. When the user plays a pre-recorded CD, Gracenote recognizes the disc then shows the artist and track name information along with the album cover art on the head unit display (when available). This enhancement brings the currently installed database up to date with the most recent information available. This update does not affect any album art displayed when using SXM.

additional operational concerns received from the field and listed involving Gen 2 F10 Navigation and Display Audio units with 7 display.

feature from the STARLINK app lineup effective 12 midnight on Thursday, September 24, 2020.

vehicles listed equipped with F10 7" Navigation and 7" display audio head units.

additional operational concerns received from the field and listed below involving an F10 Navigation and Display Audio units with 7' display.

operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2" display.

vehicles listed above equipped with F10 7 Navigation and 7 Display Audio head units. When the user plays a pre-recorded CD, Gracenote recognizes the disc then shows the artist and track name information along with the album cover art on the head unit display (when available). This enhancement brings the currently installed database up to date with the most recent information available. This update does not affect any album art displayed when using SXM."

play music files stored on a customers Android phone / device through the head units (H/U) used in the applicable models listed above. This information is applicable ONLY to Android devices operating with Operating System (OS) version 10. IOS (AppleTM) devices are not affected.

additional operational concerns received from the field and listed below involving Gen 2 F10 Navigation and Display Audio units with 7 display. The procedure will involve downloading the applicable software update files then loading them onto two flash drives for audio unit installation.

Multimedia Navigation (AVN) & Display Audio Units. This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation Gen 2 and Gen 2.1 F10 Navigation and Display Audio systems. We will continue to add more helpful tips to this TSB as they become available.

additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update files then loading them onto two flash drives for audio unit installation.

vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units.

additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display.

additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display.

operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.

vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units. When the user plays a pre-recorded CD, Gracenote recognizes the disc then shows the artist and track name information along with the album cover art on the head unit display (when available). This enhancement brings the currently installed database up to date with the most recent information available.

operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.

vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units. When the user plays a pre-recorded CD, Gracenote recognizes the disc then shows the artist and track name information along with the album cover art on the head unit display (when available). This enhancement brings the currently installed database up to date with the most recent information available.

additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update files then loading them onto two flash drives for audio unit installation.

Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update files then loading them onto two flash drives for audio unit installation. It is important to read through and understand this information completely before proceeding. These latest software updates contain new logic.

operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation.

This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen 2.1? F10 Navigation and Display Audio systems. We will continue to add more helpful tips to this TSB as they become available.

MicroSD card used in Clarion display audio units is internal and not accessible. In the event a ?Check SD Memory Card? alert message appears on the faceplate display, an exchange display audio unit must be ordered through the applicable Clarion audio exchange procedure.

may arise when operating the new-generation ?Gen 2? and ?Gen 2.1? F10 Navigation and Display Audio systems.

operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation.

operational concerns received from the field listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation. It is important to read through and understand this information completely before proceeding.

operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation.

been temporarily removed from Subarunet due to potential quality concerns with the 2nd file used in those updates. Retailers are requested to take the following action: ? If any of the following Fujitsu 10 Audio / Navigation files have been downloaded and saved locally, please discontinue their use and delete them immediately

This bulletin provides a repair procedure to address specific, confirmed customer concerns of: ? Audio output interruption every 2-3 seconds when listening to AM or FM radio broadcasts ? No audio output at all when attempting to listen to a HD Radio broadcast.

additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update files then loading them onto two flash drives for audio unit installation.

additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation. It is important to read through and understand this information completely before proceeding. These latest software updates contain new logic to address the following concerns: ? Mirrorlink 1.1 updates ? Enable Mute function for Navigation guidance ? Incomplete display of intersection names in combination meter ? Increased accuracy of the XM Traffic information displayed ? Intermittent delay (approximately 1 minute) in display of map information after initial start-up of Navigation function (2015MY Legacy and Outback only).

This bulletin announces availability of a new auxiliary USB unit to address customer concerns where the 7? Display Audio or Audio Navigation head unit will not recognize USB devices connected via the auxiliary unit.

The new grilles have increased retention capabilities to address customer concerns of a loose fit.

a group of operational concerns received from the field listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation. It is important to read through and understand this information completely before proceeding.

operational concerns received from the field listed below involving "Gen 2" F10 Navigation and Display Audio units with 7" display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation. It is important to read through and understand this information completely before proceeding.

additional operational concerns received from the field and listed below involving "Gen 2" F10 Navigation and Display Audio units with 7" display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation. It is important to read through and understand this information completely before proceeding. These latest software updates contain new logic to address the following concerns: * Mirrorlink 1.1 updates * Enable Mute function for Navigation guidance * Incomplete display of intersection names in combination meter * Increased accuracy of the XM Traffic information displayed * Intermittent delay (approximately 1 minute) in display of map information after initial start-up of Navigation function (2015MY Legacy and Outback only).

THE FOLLOWING LIST OF SYMPTOMS AND RELATED CHANGES PROVIDES A BRIEF DESCRIPTION OF WHICH CUSTOMER CONCERNS THE UPDATES ARE INTENDED TO ADDRESS. IF THE REPORTED CUSTOMER CONCERN IS NOT IDENTIFIED IN THE FOLLOWING INFORMATION, PERFORMING THE UPDATE PROCEDURE WILL NOT ADDRESS IT. IT IS IMPORTANT TO READ THROUGH AND UNDERSTAND THIS INFORMATION COMPLETELY BEFORE PROCEEDING.

proper exchange procedure.

202 and / or 204 may occur preventing the process from completing successfully.

the operation of their Gen 2/Gen 3 Telematics system equipped Subaru.

proper exchange procedure.

preliminary settlement in a class action lawsuit regarding the EyeSight system in certain Subaru vehicles.

vehicle's production.

Subaru Lock Information web-site.

retailers of the SOA321152 and SOA321153 Terminal Test Kits.

preventing the process from completing successfully.

impacts the way some vehicles with accessories are sold. This regulation applies to any automobile retailer installing accessories on a vehicle prior to its first sale.

proper exchange procedure.

proper exchange procedure for 2025MY vehicles.

Subaru Lock Information web-site.

Subaru Lock Information web-site.

whichever comes first.

proper exchange procedure.

regarding a growling-type sound being heard from under the vehicle when driving.

track assembliesd.

Advanced Automatic Collision Notification (AACN) feature operation, diagnostic tips, and best practices.

track assemblies used on the models listed.

The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Policies and Procedures Manual found in subarunet.

The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Policies and Procedures Manual found in subarunet

Subaru Lock Information web-site.

bulletin, 15-205-16 has been issued. Please refer to this new bulletin for the latest information regarding this condition.

USB cable becoming stuck and / or difficult to remove.

Subaru Lock Information web-site.

The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Policies and Procedures Manual found in subarunet.

(Immobilizer Key Collation Diagnosis).

center.

models.

February.

models.

models.

models.

models.

Information System (STIS) web site.

models

(SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.

Technical Information System (STIS) web site.

diagnosing DTCs P1C45, 46, 47,48,49 and P1C5A.

concerns relating to the operation of their Gen 2 Telematics system equipped Subaru.

COMMUNICATION ERROR on the models listed.

Technical Information System (STIS) web site.

the models listed.

(SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.

proper exchange procedure.Within the terms of the Basic New Car Warranty and the one year Replacement Parts Warranty the Exchange Program provides for replacement of a defective unit from the manufacturer.

Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for becoming aware of the latest changes. We advise you to always refer to the STIS web site when looking for the latest Service information

On Friday, April 15, 2016, a letter will be sent out to a select group of customers regarding their current SUBARU STARLINK subscription. The letter will inform the customer that their services may not be active. In an effort to provide a resolution for these customers, SOA is recommending they bring their vehicle to a Retailer for inspection and repair.

On Friday, April 15, 2016, a letter will be sent out to a select group of customers regarding their current SUBARU STARLINK subscription. The letter will inform the customer that their services may not be active. In an effort to provide a resolution for these customers, SOA is recommending they bring their vehicle to a Retailer for inspection and repair.

Provisioning is the process by which the DCM receives the subscription request and activates the related DCM features requested as outlined in the specific subscription contract. If provisioning is not successful then the DCM may remain in an inactive state and the requested services may not be activated for the customer. Field investigation has found that this may be a result of three possible conditions.

in vehicles experiencing battery drain when the ignition is off, leading to no-start conditions or frequent jump-starts.

Battery Diagnostic tool.

(SOA) is extending the Data Communication Module (DCM) Warranty from 3 years (36 months) of 36,000 miles to 8 years (96 months) or 100,000 miles, whichever comes first.

equipped with Gen 1 Data Control Modules.

Telematics which are enrolled in the Subaru STARLINK Security Plus Service featuring Stolen Vehicle Recovery Plus with Immobilizer.

in response to the 3G network sunsetting.

Module (DCM) is being tested as a dark current/standby current source.

a dark current/standby current source. All models equipped with Telematics except Solterra.

(SOA) is extending the Data Communication Module (DCM) Warranty from 3 years (36 months) of 36,000 miles to 8 years (96 months) or 100,000 miles, whichever comes first.

equipped with Gen 1 Data Control Modules.

In rare cases, customers may experience a dead battery as a result of the DCM continually trying to access the 3G network.

Telematics Data Communication Module (DCM). This coverage will apply to the vehicles listed for vehicles sold or leased in the United States.

(Subaru) is extending the Data Communication Module (DCM) warranty from three years (36 months or 36K miles) to eight years (96 months or 100K miles), whichever comes first. This extension is in light of the rare cases of dead batteries experienced by customers.

vehicles due to sunsetting of the 3G network.

equipped with Gen 1 Data Control Modules.

are enrolled in the Subaru STARLINK Security Plus Service featuring Stolen Vehicle Recovery Plus with Immobilizer.

P0841- SECONDARY OIL PRESSURE SENSOR PERFORMANCE.

(Subaru) is initiating a service program for certain 2016 model year Forester, Impreza, Crosstrek, Legacy, and Outback vehicles equipped with Telematics (STARLINK). Subaru has determined that vehicles affected by this Service Program require reprogramming of the Telematics System Data Communications Module (DCM).

(Subaru) is initiating a service program for certain 2016 model year Forester, Impreza, Crosstrek, Legacy, and Outback vehicles equipped with Telematics (STARLINK). Subaru has determined that vehicles affected by this Service Program require reprogramming of the Telematics System Data Communications Module (DCM).

checking the relay, have no steps for specifically checking the relay. Therefore, if trouble occurs in the 12 V battery relay, the Hybrid Power Control Module (HPCM) ends up being replaced even though nothing may be wrong with it.

These new EPS control modules address a limited number of customer concerns regarding increased steering effort which may occur during freezing temperatures after a cold start. The cause has been identified as a frozen relay contact inside the control module. Illumination of the EPS warning lamp can also occur and a DTC C2532 may be stored.

in either the Hybrid Power Control Module (HPCM) or in the OBD menu, Mode $02 while retrieving freeze-frame data (FFD). If a DTC is stored in either of these ECMs, a list of 42 codes may be returned in error when using either SSM4 or a Generic Scan Tool (GST). DTCs stored in other ECMs continue to be displayed normally.

The (new) -style originally used on Legacy and Outback has been adapted.

of the STARLINK Telematics Data Communication Module (DCM) along with a new claim submission requirement.

they are in partially open / closed positions. An additional detent position has also been added.

the Occupant Detection System (ODS). Following these diagnostic steps will help avoid unnecessary ODS sensor / seat cushion assembly replacement

This Service Information bulletin provides precautions to use when removing the HVAC control panel to prevent damaging the blower fan speed switch. When removing the control panel, if the fan speed switch wiring harness is pulled taught or becomes stressed, the switch may be damaged. If the connector (lower) portion of the switch becomes separated from the switch body even slightly (see Fig. 1 on page 2), the HVAC control panel assembly must be replaced. The switch itself is not serviceable. The related instrument panel (IP) wiring harness must also be inspected and replaced if any damage is confirmed. NOTE: For 2012MY Impreza, see TSB 10-78-12, dated 4/18/2012.

address customer concerns of the cover retracting on its own while driving on rough roads. The shape and length (an additional 1mm) of the stoppers on both ends of the brace which secure the cover when in use have been changed as shown in the illustration below.

Data Communication Module (DCM) Procedures for Provisioning Failure, Inspection / Repair. VERY IMPORTANT: This procedure applies to vehicles with VINs shared with your retailer as leads through the STARLINK Notifications Dashboard found on Subarunet (see example below) which indicate a possible concern with the activation status of the SUBARU STARLINK Safety and Security Services feature.

Provisioning is the process by which the DCM receives the subscription request and activates the related DCM features requested as outlined in the specific subscription contract. If provisioning is not successful then the DCM may remain in an inactive state and the requested services may not be activated for the customer. Field investigation has found that this may be a result of three possible conditions. * The DCM may be off the network due to vehicle storage or other network factors. * The DCM may be lacking power or ground due to some body side electrical concern. * The DCM may have an internal failure.

sub-level sending unit to the fuel tank. In addition, two of the caps are now used in production instead of only one. This change was made to enhance productivity during vehicle assembly.

MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. IN ADDITION, A NEW RETAINING BOLT AND TIGHTENING TORQUE SPECIFICATION ARE NOW USED TO SECURE THE MIRROR HEAD TO THE MOUNTING BASE. THIS BULLETIN PROVIDES A PROCEDURE FOR REPAIRING THE EXISTING MIRROR ASSEMBLY BY REPLACING THE THREE MOUNTING SCREWS WITH UPDATED FASTENERS. NOTE: REFER TO TSB 12-152-13 DATED 6/17/2013 FOR RELATED INFORMATION ON BRZ MODELS.

WHEN REMOVING THE CONTROL PANEL, IF THE FAN SPEED SWITCH WIRING HARNESS IS PULLED TAUGHT OR BECOMES STRESSED, THE SWITCH MAY BE DAMAGED. IF THE CONNECTOR (LOWER) PORTION OF THE SWITCH BECOMES SEPARATED FROM THE SWITCH BODY EVEN SLIGHTLY (SEE FIG. 1 ON PAGE 2), THE HVAC CONTROL PANEL ASSEMBLY MUST BE REPLACED. THE SWITCH ITSELF IS NOT SERVICEABLE. NOTE: FOR 2012MY IMPREZA, SEE TSB 10-78-12, DATED 4/18/2012.

from the CVT assembly.

available.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park.

certain CVT solenoid related DTCs as listed.

not being able to remove the key from the ignition switch when the vehicle is in Park.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park.

(SOA) is announcing an extension to the Basic New Car Limited Warranty for the CVT Parking Switch for certain 2015-2018 MY Legacy, Outback, 2012-2018 MY Impreza, 2013-2018 MY Crosstrek, 2015-2018 MY WRX and 2014-2018MY Forester vehicles.

extension to the Basic New Car Limited Warranty for your vehicles CVT Parking Brake Switch.

from the CVT assembly.

(SOA) is announcingan extension to the Basic New Car Limited Warranty for the Electronic Power Steering (EPS) GearBox Assembly for certain 2012-2018 MY vehicles.

Basic New Car Limited Warranty for your vehicles Electronic Power Steering Gear Box Assembly.

(SOA) is announcing an extension to the Basic New Car Limited Warranty for the Electronic Power Steering Gear Box Assembly for certain 2012-2018 MY vehicles.

TSB 15-279-21: Gen1 Telematics DCM Replacement for 3G Sunset which is applicable to manual transmission vehicles with push-button start ONLY.

from the CVT assembly.

related DTCs.

Investigation has identified likely sources of the seepage to be the sealant used on the CVTs oil pump chain cover and the input shaft oil seal. The repair involves chain cover removal, a thorough cleaning and inspection of the sealing surfaces followed by re-sealing the cover and replacement of the input shaft oil seal with the new, redesigned type.

Investigation has identified likely sources of the seepage to be the sealant used on the CVTs oil pump chain cover and the input shaft oil seal. The repair involves chain cover removal, a thorough cleaning and inspection of the sealing surfaces followed by re-sealing the cover and replacement of the input shaft oil seal with the new, redesigned type"

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contamination of the Park-Range switch internal components.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contamination of the Park-Range switch internal components.

During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases where the operator keeps a foot on the clutch pedal for extended periods, an increased amount of heat is generated which can cause the grease inside the bearing to deteriorate. In a case of prolonged clutch pedal application, seizure of the bearing can occur with potential damage to other related components.

During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases where the operator keeps a foot on the clutch pedal for extended periods, an increased amount of heat is generated which can cause the grease inside the bearing to deteriorate. In a case of prolonged clutch pedal application, seizure of the bearing can occur with potential damage to other related components.

(SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model years from the original five (5) years or sixty thousand (60,000) miles (whichever comes first) to ten (10) years or one-hundred thousand (100,000) miles (whichever comes first). This change is not in response to any specific condition, rather it is to provide customers with added assurance regarding the function and overall performance of their CVT. Additionally, vehicles which are beyond one-hundred thousand (100,000) miles at the time customer notification letters are mailed are being offered additional coverage for a period of one-year from the date of the customer notification letters.

VERY limited number of customer concerns regarding uneven steering effort felt when turning left or right. In areas where high concentrations of road salt are used to melt ice and snow, corrosion may develop and cause a portion of the gear box housing to crack if the vehicle were to suffer a large enough impact from hitting a pothole or similar type of road hazard.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contamination of the Park-Range switch internal components.

concerns of the system not operating. Electrical windings located inside the clutch assembly have been changed to eliminate the condition. The service procedure will involve replacement of the A/C compressor and clutch as a complete assembly.

If the face of the torque converter is stamped with a 290, 291 or 292, please return these parts to your facing RDC as defective.

concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contamination of the Park-Range switch internal components

concerns of the system not operating. Electrical windings located inside the clutch assembly have been changed to eliminate the condition. The service procedure will involve replacement of the A/C compressor and clutch as a complete assembly.

This Service Information bulletin provides a new flow chart and additional diagnostic tools to assist Technicians with troubleshooting DTC P0841- SECONDARY OIL PRESSURE SENSOR PERFORMANCE.

HAS EXTENDED THE AVAILABILITY OF REMANUFACTURED CVT TRANSMISSIONS TO INCLUDE CROSSTREK, FORESTER AND IMPREZA APPLICATIONS. PLEASE CHECK APPLICATIONS AND AVAILABILITY THROUGH NORMAL PARTS CHANNELS PRIOR TO MAKING VEHICLE REPAIRS. RETAILERS ARE REQUIRED TO USE A REMANUFACTURED UNIT FOR ALL REPAIRS REIMBURSED BY SUBARU THAT REQUIRE A MAJOR REPAIR OR REPLACEMENT, EXCEPT IN THE CASE OF A NEW AND IN-STOCK VEHICLE.

The updated valve body incorporates an enhanced valve sleeve to improve durability.

The updated valve body incorporates an enhanced valve sleeve to improve durability.

engines.

on FA and FB type engines.

type engines.

address isolated customer concerns of a ?bump? feeling from the CVT. The bump feeling has been reported to occur after the CVT is fully up to operating temperature, in Drive and with the engine at idle.

These files will address isolated customer concerns of a shock or bump feeling felt during low speed braking during engine warm-up after a cold soak.

below.

These new files address concerns of the check engine light coming on and setting a DTC P0400: EGR A FLOW. The DTC can set if the ECM tests the EGR system when ambient / intake air temperatures are below freezing.

of the blower motor becoming inoperative. If this issues occurs on models with Auto A/C, the blower fan may become totally inoperative. If this issue occurs on models with Manual A/C, the blower fan may operate on high speed only. The root cause of these conditions is water intrusion into the blower motor causing rust and corrosion to develop. Over time, the blower motor may begin to draw more electrical current to operate. if that occurs, the additional draw can cause the related fuse and/ or blower resistor to fail. To address this condition, additional packing has been added to improve sealing of the blower unit case along with development of a new style cabin air filter which also in corporates improved sealing.

-related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with this new information in the near future.

-related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with this new information in the near future.

which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness connector portion of the valve. If oil seeps into the connector, over time, the Check Engine lamp may illuminate and set various AVCS-related DTCs.

prevent false detection of DTC P0841 and / or illumination of the AT Temp light. Testing has revealed in some limited cases, air bubbles (aerated fluid) may enter certain pressure circuits within the control valve assembly causing fluid pressure control and adjustment to be calculated incorrectly resulting in DTC P0841. The shape of these circuits has been changed to prevent this occurrence.

a component part of the HEV battery pack. The new files address the BECU logic used for detection of the HEV battery pack temperature. After the engine is shut off, the battery pack generates a certain amount of self-discharge heat by design. Existing BECU logic uses a threshold for the amount of this heat which is too low. As a result, the Hybrid Motor Assist Regeneration (HEV battery recharge) system and Auto Start Stop features stop operating. In addition to these reprogramming files to address this condition, a design change was made to the replacement battery pack in support of this software update.

assembly line efficiency and increase durability. In some cases, the Check Engine light may illuminate and a knock sensor-related DTC set in the ECM memory: P0327, P0328, P0332 and P0333. The knock sensor for DIT engines is now utilized for NA engines to improve durability and resistance to heat.

PRESSURE SENSOR OUTPUT on the EyeSight equipped models listed above. The information in this bulletin is applicable when DTC C0075 is accompanied by detail codes 5090 and / or 5101. The additional diagnostics are intended to reduce unnecessary replacement of the Hydraulic Unit (H/U) Assembly.

PRESSURE SENSOR OUTPUT on the EyeSight equipped models listed above. The information in this bulletin is applicable when DTC C0075 is accompanied by detail codes 5090 and / or 5101. The additional diagnostics are intended to reduce unnecessary replacement of the Hydraulic Unit (H/U) Assembly.

either inoperative or only operates on high speed. ? Excessive rotational-type sound heard when the fan is operating.

Return Policy (See Parts Policy & Procedures Manual ? Section 12.3 Core Returns ? Reman) and provide suggestions for removal and handling of the short block.

which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness connector portion of the valve. If oil seeps into the connector, over time, the Check Engine lamp may illuminate and set various AVCS-related DTCs.

This bulletin announces reprogramming file availability to optimize the Transmission Control Module (TCM). These files will address isolated customer concerns of a ?shock? or ?bump? feeling felt during low speed braking during engine warm-up after a cold soak.

repairing the drive motor case assembly. Previously, failure of the non-serviceable o-rings on the electric oil pump relief valve located inside the case required replacement of the complete motor case assembly. Although these o-rings are still not serviceable, a new relief valve assembly, p.n. 31869AA001 (with new o-rings already installed) is now available separately.

customer concerns of a slipping belt (squeal or chirping) sound.

There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become displaced resulting in engine oil seepage. Revisions made to the upper oil pan casting: * The mating flange thickness of the casting in the area identified as the cause for the seepage has been increased by 5.5mm. (See images provided in the Parts Information section below.) This thickness increase creates the need for a longer bolt to provide proper tightening and retention. * An additional mounting point has been added to the ribbing inside the casting to increase retention of the steel baffle plate and eliminate vibration.

There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become displaced resulting in engine oil seepage.

(SOA) is extending the New Car Limited Warranty coverage in the models listed. The extension will address instances of phantom braking or the EyeSight/RAB systems causing unnecessary stoppage/slowing of the vehicle.

(SOA) is extending the New Car Limited Warranty coverage in the models listed for the selected EyeSight & Reverse Automatic Braking (RAB) components.

This information has been developed to reduce unnecessary brake caliper replacement.

customer concerns of a squeaking or squealing sound on the models listed above.

(Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall."

Under certain circumstances, some customers may have a concern regarding a howling-type sound from the rear of the vehicle later diagnosed as a faulty hub / bearing assembly. Unevenness of the backing plate surfaces may affect the concentricity (roundness) of the hub / bearing after torqued during assembly and over time, cause the howling -type sound to develop. Production changes for the backing plates have been implemented to optimize their mounting surface quality.

This will prevent the pad from dragging due to corrosion buildup which may result in uneven or premature wear of the replacement brake pads. This additional instruction applies to all models with brake pads using the upper and lower pad clips and has been added to the brake pad installation procedures found in the related Service Manuals.

allow retailers to place orders for single tools.

(Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.

(Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.

(Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.

This will prevent the pad from dragging due to corrosion buildup which may result in uneven or premature wear of the replacement brake pads. This additional instruction applies to all models with brake pads using the upper and lower pad clips and has been added to the brake pad installation procedures found in the related Service Manuals.

customer concerns of a squeaking or squealing sound on the models listed. The new shims incorporate a new laminated design with increased damping characteristics to eliminate vibration identified as the root cause of the sound. The new kits include shims only (NO brake pads).

The change is in response to customer concerns of discomfort coming from the center of the seat back and outside bolsters. When a hook fails, the center (flat) portion of the seat back drops inward from lack of support. If not repaired, with continued use, the seat back frame may break down the foam padding covering it. Eventually, the frame will likely wear through and damage the trim cover.

The change is in response to customer concerns of discomfort coming from the center of the seat back and outside bolsters. When a hook fails, the center (flat) portion of the seat back drops inward from lack of support. If not repaired, with continued use, the seat back frame may break down the foam padding covering it. Eventually, the frame will likely wear through and damage the trim cover.

This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated into the airbag system. The function of the EDR is best explained using the following statements found in the vehicle Owner?s Manual: ?This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations such as an airbag deployment or hitting a road obstacle, data that will assist in the understanding how a vehicle?s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as: ? How various systems in your vehicle were operating; ? Whether or not the driver and passenger safety belts were buckled/fastened; ? How far (if at all) the driver was depressing the accelerator and/or brake pedal; ? How fast the vehicle was traveling. This data can help provide a better understanding of the circumstances in which crashes and injuries occur.

This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for other purposes in the area around the switch, a non-conductive coating may develop over time on the internal electrical contacts and affect operation of the switch. On / Off signal output from the BLS is critical for proper operation of various systems on the vehicle. When the switch does not operate properly, warning lamps illuminate and DTCs are stored. A table with BLS-related DTCs and additional information is provided in the Service Procedure information. A photo of the switch changes is shown below. This bulletin also provides a diagnostic and adjustment procedure to be used when diagnosing brake light switch-related DTCs.

the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for other purposes in the area around the switch, a non-conductive coating may develop over time on the internal electrical contacts and affect operation of the switch. On / Off signal output from the BLS is critical for proper operation of various systems on the vehicle. When the switch does not operate properly, warning lamps illuminate and DTCs are stored. A table with BLS-related DTCs and additional information is provided in the Service Procedure information. A photo of the switch changes is shown below. This bulletin also provides a diagnostic and adjustment procedure to be used when diagnosing brake light switch-related DTCs.

illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for other purposes in the area around the switch, a non-conductive coating may develop over time on the internal electrical contacts and affect operation of the switch. On / Off signal output from the BLS is critical for proper operation of various systems on the vehicle. When the switch does not operate properly, warning lamps illuminate and DTCs are stored. A table with BLS-related DTCs and additional information is provided in the Service Procedure information. A photo of the switch changes is shown below. This bulletin also provides a diagnostic and adjustment procedure to be used when diagnosing brake light switch-related DTCs.

adjustment/calibration of the EyeSight system after body repair procedures have been performed.

exposure to pollen on painted surfaces on vehicles imported from Japan. This bulletin does not apply to SIA built vehicles.

finish peeling.

The design changes provide the bolt with an increased durability against rust.

concerns: Power windows inoperative from the drivers door master and / or passenger front door switch Unable to remotely operate other door windows from the drivers door master switch One-Touch Auto Up / Down features inoperative from either / both front door switches"

concerns: ? Power windows inoperative from the driver?s door master and / or passenger front door switch ? Unable to remotely operate other door windows from the driver?s door master switch ? One-Touch Auto Up / Down features inoperative from either / both front door switches

retention and prevent water intrusion into the converter case.

This change optimizes the lamp?s water resistance by using advanced lens sealing and plastic welding processes during assembly. (Crosstrek Hybrid)

the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There is a latch to keep the glove box closed on both sides of the glove box door. If the door is closed without using enough force to engage both latches or by pushing it shut on just one side instead of in the middle, one may close and not the other. Over time, if the door is not fully closed with both latches, high cabin temperatures along with weight of the items inside the glove box may cause the assembly to deform slightly and a gap to develop.

the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There is a latch to keep the glove box closed on both sides of the glove box door. If the door is closed without using enough force to engage both latches or by pushing it shut on just one side instead of in the middle, one may close and not the other. Over time, if the door is not fully closed with both latches, high cabin temperatures along with weight of the items inside the glove box may cause the assembly to deform slightly and a gap to develop.

The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with the windows fully closed. The vent grilles have rubber ?shutters? which occasionally, may catch on the frame (case) portion and not close properly allowing outside air / odor to enter the cabin.

The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with the windows fully closed. The vent grilles have rubber ?shutters? which occasionally, may catch on the frame (case) portion and not close properly allowing outside air / odor to enter the cabin.

The bottom edge of the door glass is pressed into a metal channel lined with rubber. The channel attaches the door glass assembly to the window regulator. In below-freezing temperature conditions, water freezing in the channel combined with the door glass sticking to the door weatherstrip can increase chance of the glass separating from the channel when attempting to operate (lower) the window. A lubricant has been added to the rubber portion to insure the glass gets fully seated during assembly which maximizes the clamping force of the channel on the glass.

In rare cases, the cushion(s) may come loose and begin to protrude from under the roof rails where they contact the body.

This bulletin provides a procedure to address a customer reported cosmetic condition of surface rust appearing on the inner seat cushion frame of the front seat assemblies.

CUSTOMER CONCERNS OF POOR APPEARANCE DUE TO CORROSION AND / OR RUSTING. EXAMPLES OF THE CONDITION ARE SHOWN IN THE PHOTOS BELOW.

retailer-installed accessory exeeds 1.5 percent of the GVWR or 100 pounds, which ever is lower.

combination lamps, where moisture and or condensation may develop on the inside of the lamp lenses.

DCM_06.00.17_20190816 installed and they wish to subscribe to Starlink Telematics Service, the DCM must be replaced.

An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s warning lamp to illuminate.

The new lens has optimized light distribution characteristics while remaining interchangeable with the original type.

An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed to set and result in the related system?s warning lamp to illuminate.

on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin identifies the equipment required to initialize (reset) the immobilizer code and cut the key blanks, for both immobilizer and non-immobilizer type keys. Subaru of America began using immobilizer systems in some 2005MY vehicles (please refer to Immobilizer Chart for more detailed information).

The application procedure of the anti-fog coating was changed to prevent a customer concern of visible drip marks (or streaks) appearing on the inside of the lamp lens.

An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s warning lamp to illuminate.

The application procedure of the anti-fog coating was changed to prevent a customer concern of visible drip marks (or streaks) appearing on the inside of the lamp lens.

This bulletin provides revised diagnostic and repair procedures to address DTC B2327 for the Subaru Rear Vehicle Detection (SRVD), Blind-Spot Detection (BSD) and Rear Cross Traffic Alert (RCTA) system on the applicable models listed above. Under very specific (rare) conditions, the radar function of the SRVD system may experience a communication error and cause the SRVD warning lamp to illuminate. In addition, under certain highway driving conditions, an improper signal calculation by the system may cause a Cancel Code B2328 to set which will also cause the SRVD warning lamp to illuminate.

NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH COULD AFFECT OPERATION OR CAUSE IMPROPER ILLUMINATION OF THE OIL PRESSURE WARNING LAMP. A SMALL PILOT PORTION WAS ADDED TO THE THREADED AREA ON P.N. 25240KA051 AS SHOWN IN THE ILLUSTRATION BELOW. REVISED PRODUCTION CHANGE INFORMATION."

unnecessary bushing replacement.

resistance to imperfections resulting from shock loads.

resistance to imperfections resulting from shock loads.

popping-type sound which may be heard when making low speed turns.

seat belt buckle assembly attaches to the seat frame.

seat belt buckle assembly attaches to the seat frame.

seat belt buckle assembly attaches to the seat frame.

seat belt buckle assembly attaches to the seat frame.

seat belt buckle assembly attaches to the seat frame.

Advanced Automatic Collision Notification (AACN) (Gen2), without a collision, airbag deployment, or accident taking place.

seat belt buckle assembly attaches to the seat frame.

the airbag system.

the airbag system.

concerns possibly resulting from an undetected A/C refrigerant leak.

concerns possibly resulting from an undetected A/C refrigerant leak.

concerns possibly resulting from an undetected A/C refrigerant leak. To improve Fixed Right First-Time (FRFT) and customer satisfaction, SOA is introducing a new procedure and fail code for first-time suspected A/C refrigerant leaks for cases when a Technician is unable to find the source of the leak or believes there was a potential factory under charge of the A/C system refrigerant."

(A/C) performance concerns possibly resulting from an undetected A/C refrigerant leak.

concerns possibly resulting from an undetected A/C refrigerant leak. To improve Fixed Right First-Time (FRFT) and customer satisfaction, SOA is introducing a new procedure and fail code for first-time suspected A/C refrigerant leaks for cases when a Technician is unable to find the source of the leak or believes there was a potential factory under charge of the A/C system refrigerant.

Use the supplied Service Procedure to address a customer concern involving the foam cushion becoming visible above the IP near the defroster vent outlets.

The change involves the addition of a rubber end cap and retaining clip onto the bottom of the receiver-dryer tank portion to prevent corrosion intrusion and enhance sealing.

Use the supplied Service Procedure to address a customer concern involving the foam cushion becoming visible above the IP near the defroster vent outlets

interface firmware has been updated.

will release an OTA to perform a software update to the DCM. This is a preventive OTA.

Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for becoming aware of the latest changes. We advise you to always refer to the STIS web site when looking for the latest Service information. Printed pages will not be made available to update printed Service Manuals.

TSB 15-20516R has been revised with new file names where applicable and re-posted to STIS.

new vehicle inventory.

new vehicle inventory wjhich must be tested and reported every 30 days.

Crosstrek Hybrid vehicles.

The purpose of the change is to improve parts integration (or ?commonality?) between models.

WHENEVER REPLACING THE MFD AND / OR COMBINATION METER, THE LIFETIME FUEL CONSUMPTION FUNCTION OF THE MFD MUST BE RESET FOR ACCURATE INFORMATION TO DISPLAY GOING FORWARD. IF NOT RESET, ERRONEOUS VALUES (EITHER EXTREMELY HIGH IN THE CASE OF A MFD REPLACEMENT OR EXTREMELY LOW FOR A COMBINATION METER REPLACEMENT) FOR LIFETIME FUEL CONSUMPTION WILL BE DISPLAYED. THERE IS NO WAY TO TRANSFER THE OLD / EXISTING LIFETIME FUEL CONSUMPTION RESULTS TO THE NEW MFD OR COMBINATION METER ALLOWING IT TO CONTINUE UNINTERRUPTED. AS A RESULT, AFTER REPLACEMENT OF THE MFD AND / OR COMBINATION METER, ALL CALCULATIONS WILL START FRESH FOLLOWING PERFORMANCE OF THE FOLLOWING PROCEDURES.

B2A20 with gen 4 Telematics.