2005 Scion TC TSBs

Once the system is reset, all previously registered keys will be erased.

Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.

Please see S-SB-0024-14.

THIS IS CAUSED BY DEBRIS ENTERING THE SEAT TRACK ASSEMBLY. *RM

*PE

*TT

*TT

*JB

*JB

*TT

TOYOTA ALL MODEL YEARS. *MJ 2002 - 2007 MODEL YEARS. TOYOTA/SCION MODELS. *TT

In certain cases, continued usage of the loose garnish could result in breakage of the Back Door Garnish

Program to extend the warranty coverage for the Back Door Garnish on 2005 to certain 2010 Model Year Scion tC and 2004 to 2006 model year Scion xB vehicles

Program to extend the warranty coverage for the Back Door Garnish on 2005 to certain 2010 Model Year Scion tC and 2004 to 2006 model year Scion xB vehicles

cases continued usage of the loose garnish may result in breakage. Please follow the procedure contained in this bulletin, which supplements the Repair Manual, to replace the back door garnish if it is loose or broken.

windshield stoppers bonded to the top of the windshield. This bulletin provides the recommended repair procedure to eliminate these types of noises from the windshield area.

cases continued usage of the loose garnish may result in breakage. Please follow the procedure contained in this bulletin, which supplements the Repair Manual, to replace the back door garnish if it is loose or broken.

quenching process during manufacturing.

ON CERTAIN VEHICLES, A WARRANTY ENHANCEMENT PROGRAM IS EXTENDED TO COVER BACK DOOR GARNISH THAT LOOSEN OR CAN BREAK WITH CONTINUOUS USAGE. MODELS 2005-2010 TC, 2004-2006 XB. *PE

*TT

(ALL TOYOTA 2002-2005 MODELS). *JB ALL '02 - '06 TOYOTA & ALL '04 - '06 SCIONS. *TT

SCION XA. *TT

*TT

SCION TX. *TT

*TT

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprograming process and outlines use of the TIS and the CUW.

damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the rick of further damage to electrical components.

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.

damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.

damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.

THE AIRBAG LIGHT IS ON WITH A STORED TROUBLE CODE. THERE IS A WIRE HARNESS PROBLEM. *RM

FLASH REPROGRAMMING ALLOWS THE ECU SOFTWARE TO BE UPDATED WITHOUT REPLACING THE ECU. FLASH CALIBRATION UPDATES FOR SPECIFIC VEHICLE MODELS/ECUS ARE RELEASED AS FIELD FIX PROCEDURES DESCRIBED IN INDIVIDUAL SERVICE BULLETINS. *PE

*KB

*TT

*TT

*TT

transmission/transaxle assembly to avoid MIL ?ON,? shifting issues, and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.

transmission/transaxle assembly to avoid MIL "ON," shifting issues, and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.

converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing washers can cause damage to the torque converter assembly. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.

SHIFTING FROM PARK T DRIVE, AND/OR OTHER ACCESSORIES BECOMING INOPERATIVE AFTER THE VEHICLE HAS COLD SOAKED IN SUB-FREEZING (BELOW 14%F [-10%C] AMBIENT AIR TEMPERATURE. A NEWLY DESIGNED RELAY HAS BEEN MADE AVAILABLE TO ADDRESS THIS CONCERN. *PE

*TT

reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pretensioner devices did not perform as expected, please follow the steps in the recommendations section below.

Scion does NOT recommend replacement of original seat covers with non-Scion leather or other seat cover materials on vehicles due to the following: Seat covers NOT recommended by Scion may affect side airbag performance, in general or in part, during an accident. Modifications that negatively affect side airbag performance can result in severe occupant injuries. Seat covers are an integral part of this safety system. Replacing fabric seat covers with non-Scion leather or other seat cover materials may compromise the effectiveness of this safety system. The design of the seat is complex, integrating safety and strength with comfort and luxury.

seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pre-tensioner devices did not perform as expected (including an unintended deployment event), please follow the steps in the recommendations section below.

DUE TO IMPROPER ASSEMBLY OF THE AIRBAG INFLATOR, WHICH IS INCORPORATED INTO THE SRS AIRBAG ASSEMBLY (SIDE AIRBAG, CURTAIN SIDE AIRBAG OR DRIVER KNEE AIRBAG), SOME INFLATORS WERE PRODUCED WITH AN INSUFFICIENT AMOUNT OF THE HEATING AGENTS NECESSARY FOR PROPER AIRBAG DEPLOYMENT. *TT

EXTENDERS AT NO COST THROUGH THEIR LOCAL DEALER. 03 - 05 TOYOTA VARIOUS MODELS. *NM

*NM

The quick reference chart is applicable to current generation vehicles only.

*TT

TOYOTA SCION TC 2005. *TT UPDATE. *TT

Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.

Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.

2004-2005 TOYOTA SCION XB. *JB

*MR

Diagnostic Trouble Code (DTC) P0335 (Crankshaft Position Sensor ?A? Circuit) stored. The intake camshaft gear assembly has been improved to help prevent this condition.

THERE IS A PROCESS TO REPAIR THEM. 2005-2007 TC. *RM

obtained through your dealership?s Parts Department utilizing standard replacement parts ordering procedures. Follow the guidelines outlined in this bulletin to ensure proper label application.

FUEL INJECTOR CLEANING. ALL 1990 - 2006 TOYOTA AND SCION MODELS EQUIPPED WITH PORT ELECTRONIC FUEL INJECTION (EFI). *TT

AN IMPROVED FUEL TANK AND FUEL TANK FILLER INLET PIPE HAVE BEEN DEVELOPED TO CORRECT THIS CONDITION. *NM

performance.

*TT

SCANTOOL SUPPORT FOR 2005 MODEL YEAR VEHICLES. *TT

*MJ UPDATE. *TT

*NM

*TT

After entering into a contract, registration of an 8-digit XM Radio ID is required. This 8-digit XM Radio ID is found by turning to channel ?0? of the satellite radio.

*TT UPDATED TO INCLUDE SCION XA 2006. *TT