2015 Scion FR-S TSBs

After a closer inspection you may find the leak is coming from the oil drain plug itself.

Use this procedure in addition to the Repair Manual.

Pump Assembly when the engine is fully warmed-up and idling. Follow the procedure in this bulletin to address this condition.

There are multiple benefits of this oil including: Reduced friction and wear on engine surfaces, Improved fuel economy, Reduction in waste oil stream (in vehicles approved for 10,000 mile oil change intervals), Reduced maintenance cost (in vehicles approved for 10,000 mile oil change intervals). Due to the improved performance and durability of 0w20 synthetic oil, Scion has extended the oil change intervals to 10,000 mile for vehicles that require this oil (except the FR-S). With this change, the following should be noted: Only Scion vehicles in which 0w20 oil is mandatory have been approved for extended oil change intervals. Vehicles in which 0w20 is an option to 5w20 (or 5w30) will continue to require 5,000 mile change intervals, even if 0w20 oil is used. In the case of vehicles with 10,000 mile oil change intervals, the 5,000 mile service interval has not been eliminated. The traditional 5,000 mile maintenance procedures (such as tire rotation) will continue to be required, and the fluid levels (including engine oil) will need to be checked and adjusted at this time. If the vehicle operation meets the standard criteria for "Special Operating Conditions" such as: driving off-road, on dirt roads, towing a trailer, making repeated short trips under 32 degrees F, or extensive idling, the engine oil must be replaced at 5,000 mile intervals, regardless of oil used. exception is FR-S, where the oil must be replaced every 3,750 miles, under "Special Operating Conditions."

Use this procedure in addition to the Repair Manual.

Engine repairs on the FR-S FA20 Engine. Toyota FIPG 1207B (Part# 00295-00103) is NOT compatible with TB 1217G or its equivalent. See recommendation below to purchase 1217H directly from ThreeBond.

500 - 1000 RPM) only when the transmission is in the Park or Neutral shift position. This condition occurs after the vehicle has been driven about 25 miles or more at highway speeds. The Transmission Control Module (TCM) logic has been revised to address this condition. Use the following procedure for reprogramming the TCM.

Batteries can become discharged due to an extended storage period, temperature, parasitic drain, or while demonstrating vehicle features and benefits in the sales process. Battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As described in this bulletin, operating the engine for 30 minutes after 60 days in storage and every 30 days thereafter will help to maintain battery State of Charge (SOC). This process supplements other movements of the vehicle as it is staged, and has specific restrictions on how maintenance is to be done. Also described in this bulletin are 2 other approved methods for maintaining battery State of Charge.

Batteries can become discharged due to an extended storage period, temperature, parasitic drain, or while demonstrating vehicle features and benefits in the sales process. Battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As described in this bulletin, operating the engine for 30 minutes after 60 days in storage and every 30 days thereafter will help to maintain battery State of Charge (SOC). This process supplements other movements of the vehicle as it is staged, and has specific restrictions on how maintenance is to be done. Also described in this bulletin are 2 other approved methods for maintaining battery State of Charge.

To minimize vehicle damage during transportation, spacers have been installed on the front shock absorber piston shafts to hold the front of the vehicle up approximately two (2) inches over normal ride height. These spacers must be removed during Pre-Delivery Service (PDS).

Engine repairs on the FR-S FA20 Engine. Toyota FIPG 1207B (Part# 00295-00103) is NOT compatible with TB 1217G or its equivalent. See recommendation below to purchase 1217H directly from ThreeBond.

500 1000 RPM) ONLY WHEN THE TRANSMISSION IS IN THE PARK OR NEUTRAL SHIFT POSITION. THIS CONDITION OCCURS AFTER THE VEHICLE HAS BEEN DRIVEN ABOUT 25 MILES OR MORE AT HIGHWAY SPEEDS. THE TRANSMISSION CONTROL MODULE (TCM) LOGIC HAS BEEN REVISED TO ADDRESS THIS CONDITION. USE THE FOLLOWING PROCEDURE FOR REPROGRAMMING THE TCM.

ENGINE REPAIRS ON THE FR-S FA20 ENGINE. TOYOTA FIPG 1207B (PART# 00295-00103) IS NOT COMPATIBLE WITH TB 1217G OR ITS EQUIVALENT. SEE RECOMMENDATION BELOW TO PURCHASE 1217H DIRECTLY FROM THREEBOND.

AFTER A CLOSER INSPECTION YOU MAY FIND THE LEAK IS COMING FROM THE OIL DRAIN PLUG ITSELF.

AFTER A CLOSER INSPECTION YOU MAY FIND THE LEAK IS COMING FROM THE OIL DRAIN PLUG ITSELF.

Once the system is reset, all previously registered keys will be erased.

Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.

To help remind customers that regular oil changes are essential to the proper maintenance of their vehicle, dealers are required to begin installing a first oil change reminder sticker prior to delivery. By doing this, customers will be reminded to return to your dealership for their first oil change. Your current oil change reminder sticker may be used. (See PDS Check Sheet item 9 of ?Final Inspection & Cleaning.?)

vehicle without using a mechanical key. To ensure the system is operating properly, the Smart Key functions (Smart Entry and Smart Start) should be inspected using the following procedure during Pre-Delivery Service (PDS).

To help remind customers that regular oil changes are essential to the proper maintenance of their vehicle, dealers are required to begin installing a first oil change reminder sticker prior to delivery. By doing this, customers will be reminded to return to your dealership for their first oil change. Your current oil change reminder sticker may be used. (See PDS Check Sheet item 9 of ?Final Inspection & Cleaning.?)

vehicle without using a mechanical key. To ensure the system is operating properly, the Smart Key functions (Smart Entry and Smart Start) should be inspected using the following procedure during Pre-Delivery Service (PDS).

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.

In addition, some models may utilize retaining clips for passenger side floor mats as well. Follow the appropriate installation procedure to attach the driver?s side and passenger?s side (if applicable) floor mat to the vehicle carpet using the floor mat retaining clips during Pre-Delivery Service (PDS).

damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.

damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.

Customer feedback indicates the following areas deserve special attention when performing PDS: ? Careful inspection for paint chips/scratches and body dents/dings. ? Proper operation of electrical accessories (including interior light, clock, and radio reset). ? Interior cleanliness. ? Proper function of mechanical systems. Customer retention and proper maintenance of vehicles has been a major focus for Toyota. To help remind customers that regular oil changes are essential to the proper maintenance of their vehicle, dealers are required to begin installing a first oil change reminder sticker prior to delivery. By doing this, customers will be reminded to return to your dealership for their first oil change. Your current oil change reminder sticker may be used. (See PDS Check Sheet item 9 of ?Final Inspection & Cleaning.?) A new PDS Check Sheet has been developed for the 2015 model year Avalon. Some check points have been added, expanded, or clarified.

to update the map, points of interest, Gracenote, and system software. The SST is used with all vehicles to deliver the update, however a unique Activation Number is required for each vehicle. Activation Numbers are provided in an Activation Card Number (ACN) pamphlet available through the normal parts ordering system. Use the process described in this bulletin to perform the update. NOTE-Map data will be released annually through the shipment of a Special Service Tool USB drive to each dealer. The SST must be stored in the SST cabinet to ensure it can be easily found.

to update the map, points of interest, Gracenote, and system software. The SST is used with all vehicles to deliver the update, however a unique Activation Number is required for each vehicle. Activation Numbers are provided in an Activation Card Number (ACN) pamphlet available through the normal parts ordering system. Use the process described in this bulletin to perform the update. NOTE-Map data will be released annually through the shipment of a Special Service Tool USB drive to each dealer. The SST must be stored in the SST cabinet to ensure it can be easily found.

14.1.0) may exhibit one or more of the following conditions: * When using the navigation route guidance the arrival time at the destination is incorrect. The GPS indicated arrival time is off by one hour (issue connected to Daylight Savings Time.) * Phonebook entries could not be found on the head unit phonebook list due to an issue with upper case and lower case text entry. * Podcasts cannot be played back on Apple devices loaded with or upgraded to iOS 8, when in iPod audio mode ("Loading..." displayed on screen). BeSpoke Premium Audio featuring Aha? System Update 14.1.0 fixes the conditions listed above as follows: * Improvement in arrival time performance when GPS data is used for Daylight Savings Time calculation. The time calculation will take into consideration if a Daylight Savings Time change has occurred. * Phonebook sorting logic has been improved to better account for lower and upper case letters. The improvement will provide better access to entries with mixed upper and lower case text. * Apple device compatibility has been improved when iOS 8 is loaded. The improvement allows Podcast playback in iPod mode.

14.1.0) may exhibit one or more of the following conditions: * When using the navigation route guidance the arrival time at the destination is incorrect. The GPS indicated arrival time is off by one hour (issue connected to Daylight Savings Time.) * Phonebook entries could not be found on the head unit phonebook list due to an issue with upper case and lower case text entry. * Podcasts cannot be played back on Apple devices loaded with or upgraded to iOS 8, when in iPod audio mode ("Loading..." displayed on screen). BeSpoke Premium Audio featuring Aha System Update 14.1.0 fixes the conditions listed above as follows: * Improvement in arrival time performance when GPS data is used for Daylight Savings Time calculation. The time calculation will take into consideration if a Daylight Savings Time change has occurred. * Phonebook sorting logic has been improved to better account for lower and upper case letters. The improvement will provide better access to entries with mixed upper and lower case text. * Apple device compatibility has been improved when iOS 8 is loaded. The improvement allows Podcast playback in iPod mode.

squeak, grind or groan type noise when the clutch pedal is depressed. APPLICABLE WARRANTY: This repair is covered under the Toyota Basic Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from the vehicle's in-service date. Warranty application is limited to occurrence of the specified condition described in this bulletin.

If the manual shift lever is rotated prior to installing the Park Neutral position switch, the detent spring may become detached from the manual shift lever. Use the information in this bulletin when installing an automatic transmission and/or Park Neutral position switch assembly.

transmission/transaxle assembly to avoid MIL "ON," shifting issues, and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.

mileage between scheduled maintenance checks. Here are some important tips when working with ATF-WS in Toyota vehicles requiring its use.

converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing washers can cause damage to the torque converter assembly. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.

To improve customer satisfaction and repair A/C system leaks in one dealer visit, Toyota has developed a set of guidelines for evaluating A/C system components.

Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.

Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.

The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.

Service Tool Set is required to properly install the seal onto the injector. As new vehicle configurations have been released, several injector seal tool sets have been distributed to accommodate these new vehicles. There are a total of two injector seal tool sets for Scion models, located in the appropriate SST cabinets. Each kit contains multiple pieces as shown in the diagram below. The individual pieces must remain together to ensure these tools are used correctly. Refer to the repair manual for the tool information to ensure the correct tool is used for the desired application.

Service Tool Set is required to properly install the seal onto the injector. As new vehicle configurations have been released, several injector seal tool sets have been distributed to accommodate these new vehicles. There are a total of two injector seal tool sets for Scion models, located in the appropriate SST cabinets. Each kit contains multiple pieces as shown in the diagram below. The individual pieces must remain together to ensure these tools are used correctly. Refer to the repair manual for the tool information to ensure the correct tool is used for the desired application.

These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture.

These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture.

Any previous printed versions of this bulletin should be discarded.

intrusion into the rear combination light housing. This Tech Tip is being published as a reference for using current level gaskets with previous level rear combination lights. Do not use prior level gaskets on newer tail lights. It is permissible to install current level gaskets with previous level tail lights.