1999 Saturn Sc TSBs
12 Technical Service Bulletins across 8 categories
Categories
Engine
3 bulletinsThis service bulletin revision provides a repair procedure to Remove Debris from Evaporator Case, Disinfect evaporator...
Read full bulletin
or Apply Cooling coil coating and install blower motor control module to correct a customer concern of A/C Odor at start-up.
Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels.
Read full bulletin
GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels.
Read full bulletin
GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
Pre-Delivery & Maintenance
2 bulletinsVehicle Recalls
This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
Body & Paint
2 bulletinsUnderbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers.
Read full bulletin
Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers.
Read full bulletin
Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
Other
1 bulletinSOME CUSTOMERS MAY COMMENT ABOUT ABNORMAL WEAR OR A CUT ON THE INBOARD EDGE OF THE DRIVER OR PASSENGER SEAT BACK COVER.
Read full bulletin
*TT
Lighting
1 bulletinVEHICLES BUILT AFTER AND INCLUDING WZ150315 MAY EXHIBIT A DOME LAMP THAT IS EITHER INOPERATIVE, WORKING INTERMITTENTLY, OR FLICKERS WHEN TURNED ON.
Read full bulletin
*TT
Electrical
1 bulletinExpanded Availability for Remanufacture and Return (R&R) Electronic Control Modules
Infotainment
1 bulletinThis informational bulletin provides information for dealers/technicians on Procedures to Unlock Delco Radio with...
Read full bulletin
Theftlock.
Software & Calibration
1 bulletinTHIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPROGRAM THE MEDIA DISC PLAYER WITH THE LATEST CALIBRATIONS TO CORRECT...
Read full bulletin
A CONDITION OF THE REAR ENTERTAINMENT SYSTEM NOT OPERATING AS INTENDED IN COLDER AMBIENT TEMPERATURE AREAS DUE TO CALIBRATION CONCERNS.