2027 Rivian R2 TSBs

a south/rear multifunction module that was incorrectly assembled by the supplier. This condition may result in a reduction of electrical isolation and a corresponding malfunction indicator on the driver display informing the driver that the vehicle requires service. In rare instances, the driver will receive a notification to pull over safely and the vehicle will enter a reduced performance safe-state mode. Rivian will inspect the south/rear multifunction module and replace the south/rear multifunction module or the HV battery energy management control module. Rivian is launching this campaign for customer satisfaction and to ensure the quality of Rivian vehicles.

port busbar that may not have been seated properly after the vehicle was repaired. This condition could prevent the vehicle from being DC fast charged. Rivian will inspect the flexible charge port busbar connection at the HV battery charge port connector and re-seat or replace the components. Rivian is launching this campaign for customer satisfaction and to ensure the quality of Rivian vehicles.

be prone to stretching and/or chafing over time. This may cause a wheel speed sensor malfunction and/or indicator light to illuminate on the driver display alerting the driver to have service performed on their vehicle. Rivian will reinforce or replace the harnesses. Rivian is launching this campaign for customer satisfaction and to ensure the quality of Rivian vehicles.

closeout panel(s) that may have inadequate adhesion to the A-pillars, causing a perceived quality issue. Rivian will replace the adhesive tape on the underhood hinge closeout panels. Rivian is launching this campaign for customer satisfaction and to ensure the quality of Rivian vehicles.

provide optimal protection from high solar loads on sunny days. Upon customer complaint of high interior temperatures from sun exposure through the roof glass, Rivian will replace the roof glass with a version that reduces solar load.

pedal that could become loose on its mounts over time, leading to noticeable free play when operating the pedal. Pedal functionality is not affected. Rivian will replace the accelerator pedal. Rivian is launching this campaign for customer satisfaction and to ensure the quality of Rivian vehicles.

the front drive unit when accelerating or decelerating while turning. Driveability and performance are not affected. Rivian will add a friction modifier to the drive unit oil to prevent the noise. Rivian is launching this campaign for customer satisfaction and to ensure the quality of Rivian vehicles.