2025 Rivian R1T TSBs

concern and may charge normally.

necessary.

precondition the battery, if necessary.

with a front NVH/ting washer that may damage the nearby wheel speed sensor, resulting in the vehicle entering into a reduced performance safe-state mode and a fault indicator light illuminating on the driver display alerting the driver to have service performed on their vehicle. Rivian will replace both front NVH/ting washers with upgraded components. Rivian is launching this campaign for customer satisfaction and to ensure the quality of Rivian vehicles.

built with upper and lower 12V battery brackets that may cause damage to the 12V battery. In these cases, the vehicle will display a "12V Battery Warning" on the instrument cluster or the customer may not be able to power up or drive the vehicle. Rivian will replace the 12V battery and both the upper and lower battery brackets. Rivian is launching this campaign for customer satisfaction and to ensure the quality of Rivian vehicles. Note: This document supersedes RCA-78-25-004-1. Revision 2 updates the approximate build dates.

Our records indicate the 12V battery in your vehicle needs to be replaced immediately to prevent a potential no-start situation. This replacement is critical for your vehicle's reliability and will be performed at no cost to you. Schedule your appointment now by calling: (855) 748-4265 Message 2: [FirstName], this is a reminder from Rivian about the no-cost 12V battery replacement for your R1. Our technicians can complete this warranty service quickly to get you back on the road and avoid a potential no-start situation. Schedule your service now by calling: (855) 748-4265 Message 3: Reminder from Rivian: Service slots to replace the 12V battery on your R1 are filling up. Give us a quick call so that we can perform this warranty service at no cost to you as soon as possible. Schedule immediately: (855) 748-4265

built with upper and lower 12V battery brackets that may cause damage to the 12V battery. In these cases, the vehicle will display a "12V Battery Warning" on the instrument cluster or the customer may not be able to power up or drive the vehicle. Rivian will replace the 12V battery and both the upper and lower battery brackets. Rivian is launching this campaign for customer satisfaction and to ensure the quality of Rivian vehicles.

recalibrate maximum charge.

vehicle to 100% SOC to recalibrate maximum charge.

current SOC Update to .27 SW Charge your vehicle to 100% SOC to recalibrate maximum charge.

cross-threaded ground nut inside the instrument panel. Affected vehicles may not be able to turn on, may not be able to shift into drive or reverse, and may display multiple fault indicator lights on the driver display. Rivian will replace the nut, repair or replace the ground stud, or replace the instrument panel beam. Rivian is launching this campaign for customer satisfaction and to ensure the quality of Rivian vehicles.

These vehicles may have been built with an improperly formatted solid state drive (SSD) for storing camera recordings. This improper formatting prevents video recording of driving incidents and Motion Cam, which is part of the vehicle's Gear Guard system. Rivian will properly format the SSD. Rivian is launching this campaign for customer satisfaction and to ensure the quality of Rivian vehicles.

manufactured with exterior door handles that, under some conditions, could squeak when the handles present or retract. The ability to open the door and enter or exit the vehicle is not affected. Upon customer complaint of a squeaking exterior door handle, Rivian will upgrade a pin inside all 4 exterior door handles.

noise and/or vibration from the door areas, particularly buzzing and rattling sounds. This results in a perceived quality issue. Upon customer complaint of noise from any door trim panel, Rivian will modify several door trim panel components to alleviate the condition.

susceptible to windshield washer fluid leaking from the front fascia camera washer nozzle. The customer may notice washer fluid leaking and/or repeated low washer fluid warnings. Rivian will install a check valve in the hose that supplies the front fascia camera washer nozzle. Rivian is launching this campaign for customer satisfaction and to ensure the quality of Rivian vehicles.

audible rattle originating from the B-pillar area when driving on rough road surfaces. Upon customer complaint, Rivian will apply anti-rattle tape near both 1st row seat belt retractors to prevent rattling.

to water contaminating the refrigerant system. Water contamination may cause premature failure of some refrigerant system components or, in some cases, cause a loss of HV isolation. A loss of HV isolation could cause the vehicle to enter a reduced performance safe state mode, and a "Limited Performance Mode" indicator light to illuminate on the driver display. Rivian will inspect the refrigerant system for water contamination and, if necessary, replace affected refrigerant system components. Rivian is launching this campaign for customer satisfaction and to ensure the quality of Rivian vehicles.

These vehicles may have been built with a visible gap at the front of the wireless charging mat, resulting in a perceived quality issue. Upon customer complaint of a gap at the front of the wireless charging mat, Rivian will modify or replace components as necessary.

We identified a need to inspect your vehicle for a potential issue that could result in being unable to access or drive your vehicleand may even require a tow. Schedule an appointment with your local Rivian Service Center. This is covered under warranty at no cost to you. Give us a call to schedule your appointment at (855) 748-4265, 7 days a week, 24hrs a day.