2022 Ram 3500 TSBs

Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): B1E21-96 - Backup Battery Component Internal Failure.

(MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): B2206-00 - Current VIN Missing / Mismatch.** Customers may experience the following: **SOS Unavailable message pops up on radio during a remote start event due to TBM DTC B2206-00. This bulletin involves reprogramming the TBM with the latest available software.Telematics Box Module (TBM) Software Updating from 5.39 to 5.65 *Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): B2206-00 - Current VIN Missing / Mismatch.** Customers may experience the following: **SOS Unavailable message pops up on radio during a remote start event due to TBM DTC B2206-00. This bulletin involves reprogramming the TBM with the latest available software.

a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): B2206-00 - Current VIN Missing / Mismatch.** Customers may experience the following: **SOS Unavailable message pops up on radio during a remote start event due to TBM DTC B2206-00. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The TBM software will be updated from 5.39.1 to 5.65 software level.Telematics Box Module (TBM) Firmware Over The Air (FOTA) Software Updating from 5.39 to 5.65 *Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): B2206-00 - Current VIN Missing / Mismatch.** Customers may experience the following: **SOS Unavailable message pops up on radio during a remote start event due to TBM DTC B2206-00. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The TBM software will be updated from 5.39.1 to 5.65 software level.Telematics Box Module (TBM) Firmware Over The Air (FOTA) Software Updating from 5.39 to 5.65 *Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): B2206-00 - Current VIN Missing / Mismatch.** Customers may experience the following: **SOS Unavailable message pops up on radio during a remote start event due to TBM DTC B2206-00. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The TBM software will be updated from 5.39.1 to 5.65 software level.

the radio: "Battery of Uconnect Box requires service. SOS call and related functions may be unavailable. Please visit an authorized dealer." PLEASE do not Replace the TBM module, only replace TBM Internal Battery (inside Telematics Box Module) and order PN68493347

Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): B1E21-96 - Backup Battery Component Internal Failure

This bulletin involves flashing the TBM to the latest software level in the case that the FOTA did not function.

Sensor(s) Not Reading And Or Showing Dashes.

This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The TBM software will be updated from 5.39.1 to 5.65 software level.

experience one or more of the following: - Error display of ""Uconnect Box Requires Service/Wifi Unavailable"" popups; [ TBM DTC B22A9-96 Internal Performance Failure ]. - Error display of ""Uconnect Box Requires Service"" pop-ups; [ TBM DTCs B1560, B1561, B1562 - Antenna loose connection ]."

U11C1-00 (Reductant Control Module Received Implausible Data From ECM/PCM), do not replace the DEF Pump. Follow TSB's released and appropriate Service Diagnostics.

/ DP vehicles with 6.7L (ETL / ETM / ETN) built on or before October 15,2024 and exhibiting DTCs P21C4-00 (Reductant Line Heater Relay Control Circuit High) and / or U11C1-00 (Reductant Control Module received implausible Data from ECM / PCM). These DTCs will occur after installation of service DCU 68458603AB. Do not replace parts until after the TSB 25-008-24 is performed. If the DTC(s) continue to set, then follow the Service Diagnostics for the applicable DTC."

Line Heater Control Circuit High, and U11C1 Reductant Control Module Received Implausible Data From ECM/PCM, Set

Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

Stuck, U103C-00 KIN/IGNM Communication

Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): P21C4-00 - Reductant Line Heater Relay Control Circuit High. U11C1-00 - Reductant Control Module Received Implausible Data From ECM/PCM. These DTCs will occur after installation of service DCU 68458603AB. This bulletin involves reprogramming the DCU with the latest available software."

(MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): P203E-00 - Reductant Level Sensor 1 Circuit Intermittent-Erratic. Customers may also experience one or more of the following: Repeated freeze/thaw cycles of the urea tank to cause solid DEF crystals to form and settle on the focus tube, blocking the level sensor signal. Rapid temperature swings from below freezing to above freezing causing an incomplete thaw of the DEF tank. When the vehicle is powered on, the diagnostic is enabled due to thawed DEF at the tank bottom surface, but the fluid in the center is still partially frozen. Not following the proper DEF fill procedure and overfilling the tank. This bulletin involves replacing the urea delivery module and possibly updating the Dosing Control Unit (DCU) software"

(MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): P203E-00 - Reductant Level Sensor 1 Circuit Intermittent-Erratic. Customers may also experience one or more of the following: Repeated freeze/thaw cycles of the urea tank to cause solid DEF crystals to form and settle on the focus tube, blocking the level sensor signal. Rapid temperature swings from below freezing to above freezing causing an incomplete thaw of the DEF tank. When the vehicle is powered on, the diagnostic is enabled due to thawed DEF at the tank bottom surface, but the fluid in the center is still partially frozen. Not following the proper DEF fill procedure and overfilling the tank. This bulletin involves replacing the urea delivery module and possibly updating the Dosing Control Unit (DCU) software."

Displayed on Cluster

Maps not loading on the Instrument Panel Cluster (IPC) display. Cannot change satellite stations, display shows one station on screen but is playing another. Battery drain. A Black screen after clicking accept at start up (Rearview camera functions normally). Radio resets (Rearview camera functions normally). Wireless connectivity disconnecting. CarPlay icon does not appear in device manager. Audio disruptions. SXMT inoperative. Audio mute. Passenger screen blank. Passenger screen apps missing. Missing profiles icon. IPC displays incorrect audio source. Radio is slow to respond. Trailer tire pressure configurations deleted. Steering wheel controls skipping SXMT channels. Recent calls not displayed. Phone audio playing when ignition is off. In addition, the following software enhancement(s) are available: Icon size/layout improvements. Carplay/Android Auto improvements. Uconnect Phone improvements. FOTA improvements. Passenger screen camera app improvements. Voice Recognition (VR) command improvements. This bulletin provides information regarding the latest FOTA update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from T25.48 or T25.51 to T27.46."

Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On "

Driving With Payload Or Trailer Towing.

Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

Customer may experience one or more of the following: ? Media source changes to AM after the theme mode is changed (ex. headlights on - dark mode). ? Audio cuts out at volume levels 30 or above. ? System switches to Wireless after key cycle, profile change, or theme mode change. ? Wireless phone interface freezes after user accepts incoming call when in a conference call. ? Wi-Fi Hotspot gets disabled automatically when turning the vehicle ignition off for a long period. ? Loss of SXM/AM/FM presets. ? Blank Screen and Home Screen Loading (Rearview Camera not affected). ? Radio Reboot (Rearview Camera not affected) This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from 136.10.04, 139.01.53 and 145.00.15 to R160. NOTE: Radio version 141.01.12 population not included in FOTA RSU due to active safety investigation and recall Z47 for RVC (Rear View Camera Blank) issue. NOTE: The National campaign for this FOTA update is estimated to be launched on April 17, 2023.

to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.

following: ? **Blank screen (Rear view camera is not affected and will still function normally).** ? Battery drain. ? Radio resets (Rear view camera will still function normally). ? Wireless connectivity device disconnect. ? CarPlayT icon does not appear in device manager. ? Climate icon missing. ? Audio disruptions. ? SXMT inoperative. ? Audio muted. ? Passenger screen blank. ? Passenger screen apps missing. ? Missing profiles icon. ? Instrument Panel Cluster (IPC) displays incorrect audio source. ? Radio is slow to respond. ? Trailer tire pressure configurations deleted. ? Steering wheel controls skipping SXMT channels. ? Recent calls not displayed. ? Phone audio playing with ignition off. The following improvements are also included with this update: ? Apple CarPlayT and Android AutoT improvements. ? Voice Recognition (VR) command improvements. ? Uconnect phone improvements. ? FOTA improvements. ? Passenger screen camera app improvements. ? Icon size/layout improvements. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from S24.13 or S24.18 to S26.17. NOTE: The national launch for the FOTA is expected to begin November 25, 2022.

Customer may experience one or more of the following: ? Media source changes to AM after the theme mode is changed (ex. headlights on - dark mode). ? Audio cuts out at volume levels 30 or above. ? System switches to Wireless after key cycle, profile change, or theme mode change. ? Wireless phone interface freezes after user accepts incoming call when in a conference call. ? Wi-Fi Hotspot gets disabled automatically when turning the vehicle ignition off for a long period. ? Loss of SXM/AM/FM presets. ? Blank Screen and Home Screen Loading (Rearview Camera not affected). ? Radio Reboot (Rearview Camera not affected) This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from 136.10.04, 139.01.53 and 145.00.15 to R160. NOTE: Radio version 141.01.12 population not included in FOTA RSU due to active safety investigation and recall Z47 for RVC (Rear View Camera Blank) issue. NOTE: The National campaign for this FOTA update is estimated to be launched on April 17, 2023.

to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.

Driving With Payload Or Trailer Towing.

Media source changes to AM after the theme mode is changed (ex. headlights on - dark mode). ? Audio cuts out at volume levels 30 or above. ? System switches to Wireless after key cycle, profile change, or theme mode change. ? Wireless phone interface freezes after user accepts incoming call when in a conference call. ? Wi-Fi Hotspot gets disabled automatically when turning the vehicle ignition off for a long period. ? Loss of SXM/AM/FM presets. ? Blank Screen and Home Screen Loading. (Rearview Camera not affected). ? Radio Reboot. (Rearview Camera not affected). This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from 136.10.04, 139.01.53 and 145.00.15 to R160. NOTE: The national launch for the FOTA is expected to begin April 17, 2023.

following: ? Uconnect Box Message at Startup. ? Uconnect Box Error Or Requires Service Message. ? Uconnect Mobile App trunk status showing as closed when trunk is open. ? Diagnostic Trouble Codes (DTCs) for Electronic Control Modules (ECUs) won?t be shown to customer through the Vehicle Health alert (Mobile App or email). The TBM software will be updated from 5.25 to 5.39.1.

following: ? Uconnect Box Message at Startup. ? Uconnect Box Error Or Requires Service Message. ? Connectivity: Uconnect Mobile App trunk status showing as closed when trunk is open. ? Connectivity: Diagnostic Trouble Codes (DTCs) for Electronic Control Modules (ECUs) won?t be shown to customer through the Vehicle Health alert (Mobile app or email). This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The TBM software will be updated from 5.13 to 5.25 to 5.39.1 (DS) and 5.25 to 5.39.1 (DJ, DD, D2, DP, DF). NOTE: The (DS) TBM software update will be a two-step update. NOTE: The national launch for the FOTA is expected to begin June 16, 2023.

camera is not affected and will still function normally). ? Battery drain. ? Radio resets (Rear view camera will still function normally). ? Wireless connectivity device disconnect. ? CarPlayT icon does not appear in device manager. ? Climate icon missing. ? Audio disruptions. ? SXMT inoperative. ? Audio muted. ? Passenger screen blank. ? Passenger screen apps missing. ? Missing profiles icon. ? Instrument Panel Cluster (IPC) displays incorrect audio source. ? Radio is slow to respond. ? Trailer tire pressure configurations deleted. ? Steering wheel controls skipping SXMT channels. ? Recent calls not displayed. ? Phone audio playing with ignition off. ? SXM radio application missing (North America Only). ? Navigation screen is blank. ? Media page screen is frozen. ? With forward camera, ?Check Entire Surroundings? verbiage is

camera is not affected and will still function normally). ? Battery drain. ? Radio resets (Rear view camera will still function normally). ? Wireless connectivity device disconnect. ? CarPlayT icon does not appear in device manager. ? Climate icon missing. ? Audio disruptions. ? SXMT inoperative. ? Audio muted. ? Passenger screen blank. ? Passenger screen apps missing. ? Missing profiles icon. ? Instrument Panel Cluster (IPC) displays incorrect audio source. ? Radio is slow to respond. ? Trailer tire pressure configurations deleted. ? Steering wheel controls skipping SXMT channels. ? Recent calls not displayed. ? Phone audio playing with ignition off.** ? SXM radio application missing (North America Only). ? Navigation screen is blank. ? Media page screen is frozen. ? With forward camera, ?Check Entire Surroundings? verbiage is covering other buttons. ? Weather images are oversized. ? SXM 360L / Internet stations not available. **The following improvements are also included with this update: ? Apple CarPlayT and Android AutoT improvements. ? Voice Recognition (VR) command improvements. ? Uconnect phone improvements. ? FOTA improvements. ? Passenger screen camera app improvements. ? Icon size/layout improvements.** This bulletin involves inspecting the software level and updating the software to S26.17.

Media source changes to AM after the theme mode is changed (ex. headlights on - dark mode). ? Audio cuts out at volume levels 30 or above. ? System switches to Wireless after key cycle, profile change, or theme mode change. ? Wireless phone interface freezes after user accepts incoming call when in a conference call. ? Wi-Fi Hotspot gets disabled automatically when turning the vehicle ignition off for a long period. ? Loss of SXM/AM/FM presets. ? Blank Screen when Home Screen Loading. (rear view camera operation not affected). ? Radio Reboot. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from 136.10.04, 139.01.53 and 145.00.15 to R160. NOTE: The national launch for the FOTA is expected to begin April 18, 2023.

Ambient Air Temperature Sensor Circuit-Circuit Short to Battery or Open, P0073 Ambient Air Temperature Sensor Circuit High

Check for electrical harness routing too close to speaker's rear moving parts, improper connection, and/or harness pinch or damage. 2. Ensure no loose components, including trim grilles, fasteners, surrounding IP parts, etc. were found when removing the speaker. 3. Try "bad" speaker at another IP location and see if noise follows speaker. Try a different "good" speaker at "bad speaker location" and see if noise still happens at "bad" location. If even with this verification and adjustments the speaker sounds bad, test the individual speaker with the audio files provided in the Service Library Homepage under "Reference Materials" prior to replacement

following: ? **Blank screen (Rear view camera is not affected and will still function normally).** ? Battery drain. ? Radio resets (Rear view camera will still function normally). ? Wireless connectivity device disconnect. ? CarPlayT icon does not appear in device manager. ? Climate icon missing. ? Audio disruptions. ? SXMT inoperative. ? Audio muted. ? Passenger screen blank. ? Passenger screen apps missing. ? Missing profiles icon. ? Instrument Panel Cluster (IPC) displays incorrect audio source. ? Radio is slow to respond. ? Trailer tire pressure configurations deleted. ? Steering wheel controls skipping SXMT channels. ? Recent calls not displayed. ? Phone audio playing with ignition off. The following improvements are also included with this update: ? Apple CarPlayT and Android AutoT improvements. ? Voice Recognition (VR) command improvements. ? Uconnect phone improvements. ? FOTA improvements. ? Passenger screen camera app improvements. ? Icon size/layout improvements. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from S24.13 or S24.18 to S26.17. NOTE: The national launch for the FOTA is expected to begin November 25, 2022.

Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from S26.15 to S26.17. NOTE: National launch for this FOTA update is expected to begin February 09, 2023.

The customer may experience the following: A long crank with no start, or a no crank, no start. NOTE: This symptom/condition is caused from a poor connection to the starter. Nut (Starter B+ Cable)

NOx Sensor Diagnostic Trouble Codes (DTCs) Diagnosis Information.

Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set: B22A9 - ECU Internal Performance. Customers may also comment on the following:Black radio screen with audio at start up (backup camera functions normally).

Diagnostic Trouble Code (DTC) P04E3 ? Crankcase Ventilation Hose Connection Sensor Circuit High, Set.

Diagnostic Trouble Code (DTC) P0471 ? Exhaust Pressure Sensor 1 Performance, Set.

This bulletin involves extending the warranty on the DPF. NOTE: This is an ?Information Only? Technical Service Bulletin to inform the dealer of this warranty Extension.

Diagnostic Trouble Code (DTC) P238D ? Water In Fuel Sensor B Circuit High, Set.

Ambient Air Temperature Sensor Circuit-Circuit Short to Battery or Open, P0073 Ambient Air Temperature Sensor Circuit High

Battery or Open; P0073 Ambient Air Temperature Sensor Circuit High

Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find thefollowing Diagnostic Trouble Code (DTC) has been set: C15CE-31 - Tire Pressure Sensor 7-No Signal. Customers may also comment on the following: Instrument Panel Cluster (IPC) warning is illuminated for the tire pressure sensors.

regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. National launch for this FOTA update is expected on:Current level 5.13.0 update to 5.25.0, estimated launch date of 10/24/22. Customers may experience the following: All data App and remote operations feature are missing.

Displayed on Cluster

Displayed on Cluster

damaged, burned, melted or corroded, prior to replacing the part, please contact FCA Redacted Content If no response in 15 minutes, proceed with repair. Please send pictures of the failed part to FCA Redacted Content

Ambient Air Temperature Sensor Circuit-Circuit Short to Battery or Open, P0073 Ambient Air Temperature Sensor Circuit High

A missing security certificate or after a new TBM installed, or any active DTC set by TBM will trigger this popup. Please refer to STAR Online S2108000015 for more information. If you continually see this popup message, also see an active B22A9-93 DTC, please use wiTECH tool to check TBM2 module and record the failure information as shown on STAR Online S228A000003. Before replacing the TBM module, please check connections behind the TBM, the antenna and harness for improper connection and damage. Please call FCA Redacted Content

Ambient Air Temperature Sensor Circuit-Circuit Short to Battery or Open, P0073 Ambient Air Temperature Sensor Circuit High

A missing security certificate or after a new TBM installed, or any active DTC set by TBM will trigger this popup. Please refer to STAR Online S2108000015 for more information. If you continually see this popup message, also see an active B22A9-93 DTC, please use wiTECH tool to check TBM2 module and record the failure information as shown on STAR Online S228A000003. Before replacing the TBM module, please check connections behind the TBM, the antenna and harness for improper connection and damage. Please call FCA Redacted Content

Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set: B22A9 - ECU Internal Performance. Customers may also comment on the following:Black radio screen with audio at start up (backup camera functions normally).

Diagnostic Trouble Code (DTC) P04E3 ? Crankcase Ventilation Hose Connection Sensor Circuit High, Set.

Diagnostic Trouble Code (DTC) P0471 ? Exhaust Pressure Sensor 1 Performance, Set.

Battery or Open; P0073 Ambient Air Temperature Sensor Circuit High

(FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated for (DT and HD trucks) from S21C.6 to S21D.5 and for (WS) from S21B.5 to S21D.5.The national launch for the FOTA is expected to begin December 22, 2021. Customers may experience one or more of the following:Hissing, water sprinkler or salt shaker noise(WS only). Apple Carplay concerns. Black screen. Loud buzzing noise followed by radio reboot. Unable to switch between media sources while playing SXM. Radio shows screen off when comfort popup appears. Phone won't reconnect when connection is lost. Delete device in settings menu doesn't work. App pages have black background. Radio does not fall asleep with ignition off. Radio unresponsive. CarPlay will not connect.

Diagnostic Trouble Code (DTC) P0461 ? Fuel Level Sensor 1 Performance Set

replacing the part, please contact FCA Redacted Content If no response in 15 minutes, proceed with repair. Please send pictures of the failed part to FCA Redacted Content

Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technicianmay find that the following Diagnostic Trouble Code (DTC) has been set: B22A9 - ECU Internal Performance. Customers may also comment on the following:Black radio screen with audio at start up (backup camera functions normally).

replacing the part, please contact FCA Redacted Content If no response in 15 minutes, proceed with repair. Please send pictures of the failed part to FCA Redacted Content

Battery or Open; P0073 Ambient Air Temperature Sensor Circuit High

If the DTC is stored and able to be cleared, component replacement is not necessary. Please follow the service procedures to attempt to clear any active fault(s) which includes module hard reset, full CAN power down/sleep, or DTC clear in WiTech. Please contact FCA Redacted Content prior to any ASCM replacement at FCA Redacted Content If no response within 15 minutes, please proceed with repair. Any new module requires a flash following installation regardless of whether the current part number is up-to-date .

Trailer Towing.

replacing the part, please contact FCA Redacted Content If no response in 15 minutes, proceed with repair. Please send pictures of the failed part to FCA Redacted Content

Battery or Open; P0073 Ambient Air Temperature Sensor Circuit High

Diesel Exhaust Fluid (DEF) issue in extreme cold weather. Diagnostic Trouble Codes (DTCs) P203E - Reductant Level Sensor 1 Circuit Intermittent and/or P203F - Reductant Level Too Low set.

or B1570-93

TBM Setting Stored Or Pending DTCs B22A9, B1560, B1561, B1562

Follow the Infotainment Ordering guide available under the "Parts" section of Dealer Connect: DealerCONNECT> Parts> News& Information> Audio & Electronic Products Exchange Process

? Mobile Wi-Fi inoperative upon start up. ? Hotspot gives "No Internet" connection message on phone when trying to connect to a device. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from QR39.5 to QR40.11. NOTE: National launch for this FOTA update is expected to begin Feburary 19, 2024.

? Electric vehicle pages inoperable. ? Ambient Light Setting inoperable. ? Radio reset (Rear view camera functions normally). ? Voice Recognition (VR) inoperable. ? Scheduled cabin cooling inoperable. ? Unable to exit electric vehicle page. ? Audio sources inoperable. ? Wireless CarPlay inoperable. ? Setting preferences not saved on correct profile. ? Audio loss. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from S26.17 to T25.48. NOTE: The National campaign for this FOTA update launched July 17, 2023.

? Radio reset (Rearview camera functions normally). ? Voice Recognition (VR) inoperable. ? Audio sources inoperable. ? Wireless CarPlay inoperable. ? Setting preferences not saved on correct profile. ? Audio loss. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from S26.17 to T25.48. NOTE: The National campaign for this FOTA update launched July 17, 2023.

following: ? Missing Side Camera and Trailer View SoftKeys. ? Ambient Light Setting inoperable. ? Radio reset (Rearview camera functions normally). ? Voice Recognition (VR) inoperable. ? Audio sources inoperable. ? Wireless CarPlayT inoperable. ? Setting preferences not saved on correct profile. ? Audio loss. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from S26.17 and T25.48 to T25.51. NOTE: The National campaign for this FOTA update is estimated to be launched on September 29, 2023.

the following: ? Missing Side Camera and Trailer View SoftKeys. ? Ambient Light Setting inoperable. ? Radio reset (Rearview camera functions normally). ? Voice Recognition (VR) inoperable. ? Audio sources inoperable. ? Wireless CarPlay inoperable. ? Setting preferences not saved on correct profile. ? Audio loss. This bulletin supersedes Technical Service Bulletin (TSB) 08-212-23, date of issue September 01, 2023, which should be removed from your files. This is a complete revision and no asterisks have been used to highlight revisions.

following: ? Missing Side Camera and Trailer View SoftKeys. ? Ambient Light Setting inoperable. ? Radio reset (Rearview camera functions normally). ? Voice Recognition (VR) inoperable. ? Audio sources inoperable. ? Wireless CarPlayT inoperable. ? Setting preferences not saved on correct profile. ? Audio loss. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from S26.17 and T25.48 to T25.51. NOTE: The National campaign for this FOTA update is estimated to be launched on September 29, 2023.

of the following: ? Ambient Light Setting inoperable. ? Radio reset (Rearview camera functions normally). ? Voice Recognition (VR) inoperable. ? Audio sources inoperable. ? Wireless CarPlayT inoperable. ? Setting preferences not saved on correct profile. ? Audio loss. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from S24.6, S26.15 and T25.43 to T25.48. NOTE: The National campaign for this FOTA update is estimated to be launched on September 29, 2023.

following: ? Ambient Light Setting inoperable. ? Radio reset (Rearview camera functions normally). ? Voice Recognition (VR) inoperable. ? Audio sources inoperable. ? Wireless CarPlayT inoperable. ? Setting preferences not saved on correct profile. ? Audio loss. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from S26.17 to T25.48. NOTE: The National campaign for this FOTA update launched July 17, 2023.

? Electric vehicle pages inoperable. ? Ambient Light Setting inoperable. ? Radio reset (Rearview camera functions normally). ? Voice Recognition (VR) inoperable. ? Scheduled cabin cooling inoperable. ? Unable to exit electric vehicle page. ? Audio sources inoperable. ? Wireless CarPlayT inoperable. ? Setting preferences not saved on correct profile. ? Audio loss. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from S26.17 to T25.48. NOTE: The National campaign for this FOTA update launched July 17, 2023.

This bulletin supersedes Technical Service Bulletin (TSB) 08-079-23, date of issue April 4, 2023, which should be removed from your files. This is a complete revision and no asterisks have been used to highlight revisions.

(FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. National launch for this FOTA update is expected on:Current Level R139.01.53 update to R141.01.12, launched on 02/08/2022. Current Level R136.10.04 update to R141.01.12, launched on 02/11/2022. Current Level R136.09.00 update to R141.01.12, launched on 02/16/2022. Customers may experience one or more of the following: Phone notification volume pops up while switching between driver profiles. Media widget gets "blacked out" on SXM after switching user profiles. In light them mode and in balance/fade menu, hard to see the position icon. In shortcuts menu pulled down from status bar, the right side arrow is highlighted like it can be selected. This should be greyed out like the left arrow. Loss of SXM radio saved presets. Compass not showing or showing incorrect direction. When on a phone call with bluetooth, echo noise can be heard. SXM radio audio is playing in vehicle speakers while call is ongoing. SXM radio stuck on current channel, no audio and can't navigate to other channels using soft keys or knob.

The software will be updated to 141.01.12.00. Customers may experience one or more of the following: Phone notification volume pops up while switching between driver profiles. Media widget gets "blacked out" on SXM? after switching user profiles. In light theme mode and in balance/fade menu, hard to see the position icon. In shortcuts menu pulled down from status bar, the right side arrow is highlighted like it can be selected. This should be greyed out like the left arrow. Loss of SXM? radio saved presets. Compass not showing or showing incorrect direction. When on a phone call with bluetooth, echo noise can be heard. SXM? radio audio is playing in vehicle speakers while call is ongoing. SXM? radio stuck on current channel, no audio and unable to navigate to other channels using soft keys or knob.

Exchange) ?2021 - 2022 Jeep Grand Cherokee (WL), 2022 Wagoneer and Grand Wagoneer (WS), 2022 Ram 1500 Pickup (DS/DT) and 2022 Ram Heavy Duty Pickup (DD/DF/DJ/ DP/D2) (Rev. D)

Customers may describe one or more of the following: Connected features are inoperable. Radio not receiving Firmware Over The Air (FOTA) updates.

(FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. National launch for this FOTA update is expected on:Current Level R139.01.53 update to R141.01.12, launched on 02/08/2022. Current Level R136.10.04 update to R141.01.12, launched on 02/11/2022. Current Level R136.09.00 update to R141.01.12, launched on 02/16/2022. Customers may experience one or more of the following: Phone notification volume pops up while switching between driver profiles. Media widget gets "blacked out" on SXM after switching user profiles. In light them mode and in balance/fade menu, hard to see the position icon. In shortcuts menu pulled down from status bar, the right side arrow is highlighted like it can be selected. This should be greyed out like the left arrow. Loss of SXM radio saved presets. Compass not showing or showing incorrect direction. When on a phone call with bluetooth, echo noise can be heard. SXM radio audio is playing in vehicle speakers while call is ongoing. SXM radio stuck on current channel, no audio and can't navigate to other channels using soft keys or knob.

The software will be updated to 141.01.12.00. Customers may experience one or more of the following: Phone notification volume pops up while switching between driver profiles. Media widget gets "blacked out" on SXM? after switching user profiles. In light theme mode and in balance/fade menu, hard to see the position icon. In shortcuts menu pulled down from status bar, the right side arrow is highlighted like it can be selected. This should be greyed out like the left arrow. Loss of SXM? radio saved presets. Compass not showing or showing incorrect direction. When on a phone call with bluetooth, echo noise can be heard. SXM? radio audio is playing in vehicle speakers while call is ongoing. SXM? radio stuck on current channel, no audio and unable to navigate to other channels using soft keys or knob.

Exchange) ?2021 - 2022 Jeep Grand Cherokee (WL), 2022 Wagoneer and Grand Wagoneer (WS), 2022 Ram 1500 Pickup (DS/DT) and 2022 Ram Heavy Duty Pickup (DD/DF/DJ/ DP/D2) (Rev. D)

The software will be updated to 141.01.12.00. Customers may experience one or more of the following:Phone notification volume pops up while switching between driver profiles. Media widget gets "blacked out" on SXM? after switching user profiles. In light theme mode and in balance/fade menu, hard to see the position icon. In shortcuts menu pulled down from status bar, the right side arrow is highlighted like it can be selected. This should be greyed out like the left arrow. Compass not showing or showing incorrect direction. When on a phone call with wireless connectivity, echo noise can be heard. SXM? radio audio is playing in vehicle speakers while call is ongoing. SXM? radio stuck on current channel, no audio and unable to navigate to other channels using soft keys or knob.

(FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from S23.13 to S24.13The national launch for the FOTA is expected to begin June 11, 2022. Customers may experience one or more of the following: No Verbal warnings on navigation. Audio Overlap between sources. Radio doesn?t recognize the vehicle is in park. No keyboard pop up, vehicles setting are hidden. Radio presets are not saving. Audio mute on calls (Phone, SOS and Ecall). Radio resets. Radio screen freezes.The rear view camera display, will work properly if the radio display screen freezes. Audio disruptions. Unable to connect compatible wireless connectivity device. Wireless connectivity disconnecting. Improvements are included with this update:Apple CarPlay and Android Auto improvements. Voice Recognition improvements. Uconnect Phone improvements.

The software will be updated to 141.01.12.00. Customers may experience one or more of the following: Phone notification volume pops up while switching between driver profiles. Media widget gets "blacked out" on SXM? after switching user profiles. In light theme mode and in balance/fade menu, hard to see the position icon. In shortcuts menu pulled down from status bar, the right side arrow is highlighted like it can be selected. This should be greyed out like the left arrow. Loss of SXM? radio saved presets. Compass not showing or showing incorrect direction. When on a phone call with wireless connectivity, echo noise can be heard. SXM? radio audio is playing in vehicle speakers while call is ongoing. SXM? radio stuck on current channel, no audio and unable to navigate to other channels using soft keys or knob.

(FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. National launch for this FOTA update is expected on:Current Level R139.01.53 update to R141.01.12, launched on 02/08/2022. Current Level R136.10.04 update to R141.01.12, launched on 02/11/2022. Current Level R136.09.00 update to R141.01.12, launched on 02/16/2022. Customers may experience one or more of the following: Phone notification volume pops up while switching between driver profiles. Media widget gets "blacked out" on SXM after switching user profiles. In light them mode and in balance/fade menu, hard to see the position icon. In shortcuts menu pulled down from status bar, the right side arrow is highlighted like it can be selected. This should be greyed out like the left arrow. Loss of SXM radio saved presets. Compass not showing or showing incorrect direction. When on a phone call with bluetooth, echo noise can be heard. SXM radio audio is playing in vehicle speakers while call is ongoing. SXM radio stuck on current channel, no audio and can't navigate to other channels using soft keys or knob.

The software will be updated to 141.01.12.00. Customers may experience one or more of the following: Phone notification volume pops up while switching between driver profiles. Media widget gets "blacked out" on SXM? after switching user profiles. In light theme mode and in balance/fade menu, hard to see the position icon. In shortcuts menu pulled down from status bar, the right side arrow is highlighted like it can be selected. This should be greyed out like the left arrow. Loss of SXM? radio saved presets. Compass not showing or showing incorrect direction. When on a phone call with bluetooth, echo noise can be heard. SXM? radio audio is playing in vehicle speakers while call is ongoing. SXM? radio stuck on current channel, no audio and unable to navigate to other channels using soft keys or knob.

Exchange) ?2021 - 2022 Jeep Grand Cherokee (WL), 2022 Wagoneer and Grand Wagoneer (WS), 2022 Ram 1500 Pickup (DS/DT) and 2022 Ram Heavy Duty Pickup (DD/DF/DJ/ DP/D2) (Rev. D)

B1561-13

B1561-13

(FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. National launch for this FOTA update is expected on:Current Level R139.01.53 update to R141.01.12, launched on 02/08/2022. Current Level R136.10.04 update to R141.01.12, launched on 02/11/2022. Current Level R136.09.00 update to R141.01.12, launched on 02/16/2022. Customers may experience one or more of the following: Phone notification volume pops up while switching between driver profiles. Media widget gets "blacked out" on SXM after switching user profiles. In light them mode and in balance/fade menu, hard to see the position icon. In shortcuts menu pulled down from status bar, the right side arrow is highlighted like it can be selected. This should be greyed out like the left arrow. Loss of SXM radio saved presets. Compass not showing or showing incorrect direction. When on a phone call with bluetooth, echo noise can be heard. SXM radio audio is playing in vehicle speakers while call is ongoing. SXM radio stuck on current channel, no audio and can't navigate to other channels using soft keys or knob.

The software will be updated to 141.01.12.00. Customers may experience one or more of the following: Phone notification volume pops up while switching between driver profiles. Media widget gets "blacked out" on SXM? after switching user profiles. In light theme mode and in balance/fade menu, hard to see the position icon. In shortcuts menu pulled down from status bar, the right side arrow is highlighted like it can be selected. This should be greyed out like the left arrow. Loss of SXM? radio saved presets. Compass not showing or showing incorrect direction. When on a phone call with bluetooth, echo noise can be heard. SXM? radio audio is playing in vehicle speakers while call is ongoing. SXM? radio stuck on current channel, no audio and unable to navigate to other channels using soft keys or knob.

Exchange) ?2021 - 2022 Jeep Grand Cherokee (WL), 2022 Wagoneer and Grand Wagoneer (WS), 2022 Ram 1500 Pickup (DS/DT) and 2022 Ram Heavy Duty Pickup (DD/DF/DJ/ DP/D2) (Rev. D)

(FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from S21B.5 to S21C.6 (DT and HD), and S21C.8 (WS). The national launch for the FOTA will begin November 24, 2021 for DT and HD and December 10, 2021 For WS 2021. Customers may experience one or more of the following:Apple Carplay concerns. Multiple Human Machine Interface (HMI) issues. Weather App will not open. Temperature Control soft button difficult to press and get a response. Voice Recognition audio muted. Radio Freezes. Android Auto widget screen smaller than normal. Navigation says ?You have reached your destination? before you are at the location when using Android Auto.

The software will be updated from S21.8 or S21B.5 to S21C.6. Customers may experience one or more of the following:Valet mode inoperable(DT TRX only). Right and left trailer camera view is inoperable, soft buttons do not work, and "More Cams" button down does not show on Trailer 360 mode. Unable to program Trailer Tire Pressure Monitor (TTPM) warning. In addition the following enhancement are included:CarPlay enhancements.

The software will be updated from S21.8 or S21B.5 to S21C.6. Customers may experience one or more of the following:Valet mode inoperable(DT TRX only). Right and left trailer camera view is inoperable, soft buttons do not work, and "More Cams" button down does not show on Trailer 360 mode. Unable to program Trailer Tire Pressure Monitor (TTPM) warning. In addition the following enhancement are included:CarPlay enhancements.

and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): P0299-00 - Turbocharger Underboost. Customers may also comment on the following: Low power/acceleration or lag condition. This bulletin involves performing an Air Handling Performance Test (APT) and possibly replacing the air filter.

New Part: 68645327AA (Non-Oiled Air Filter) Replaces: 53034051AA (Oiled Air Filter) - This part is superseded and should no longer be installed. The air filter for all other applications remains unchanged: Continue to use 68517554AA for: All 2018 MY and older 6.7L Cummins equipped vehicles. All 2019 MY and newer vehicles with non-6.7L engines. 2. Special Service Procedure for DTC P0299 Application: 2019-2024 MY HD Trucks with 6.7L Diesel (ETM/ETN) Condition: If DTC P0299 is active and the vehicle is equipped with the previous oiled air filter (PN# 53034051AA). Procedure: Replace the oiled air filter (53034051AA) with the new non-oiled filter (68645327AA). Service Catalog reflects these updated usages.

Clicking noise. Engine noise.

In these situations, it is recommended to use the appropriate Mopar air filter (57008652AA). The "AC" level of the part is in development to resolve this issue. 1BP00507AB should still be usable for 2018 and older Model year Cummins engines.

please reference SOL Case #S2508000062 prior to replacement of Transfer Case shift motor.

Flash: Powertrain Control Module (PCM) Updates *Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P0868-00 - Transmission Fluid Pressure Low. P0933-00 - Hydraulic Pressure Sensor Range/performance P0735-00 - Gear 5 Shift Incorrect Ratio. P0729-00 - Gear 6 Shift Incorrect Ratio. Customers may also experience one or more of the following: While driving the vehicle, the Instrument Panel Cluster (IPC) is showing a transmission overheat message. Check engine light illuminates and will turn on and off while driving.** 68RFE Transmission sump temperature derate **This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.**

(D2/DD/DF/DJ/DP)

This bulletin involves adding oil system protection and letting the engine idle."

REPAIR SUMMARY: This bulletin involves adding oil system protection and letting the engine idle."

Or Corrupted

(MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): P2459 - Diesel Particulate Filter Regeneration Too Frequent. Customers may also experience the following: Vehicle has entered engine performance de-rate mode. NOTE: Engine performance de-rate mode will occur when DTC P2459 has been set for a long period. This bulletin involves replacing the DPF if DTC P2459 is set."

(MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): P2459 - Diesel Particulate Filter Regeneration Too Frequent. Customers may also experience the following: Vehicle has entered engine performance de-rate mode. NOTE: Engine performance de-rate mode will occur when DTC P2459 has been set for a long period. This bulletin involves replacing the DPF if DTC P2459 is set."

the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): P203E-00 - Reductant Level Sensor 1 Circuit Intermittent-Erratic. Customers may also experience one or more of the following: Repeated freeze/thaw cycles of the urea tank to cause solid DEF crystals to form and settle on the focus tube, blocking the level sensor signal. Rapid temperature swings from below freezing to above freezing causing an incomplete thaw of the DEF tank. When the vehicle is powered on, the diagnostic is enabled due to thawed DEF at the tank bottom surface, but the fluid in the center is still partially frozen. Not following the proper DEF fill procedure and overfilling the tank This bulletin involves replacing the urea delivery module and grade vent valve and updating the Dosing Control Unit (DCU) software This bulletin involves replacing the urea delivery module and possibly updating the Dosing Control Unit (DCU) software"

(MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P2459 - Diesel Particulate Filter Regeneration Too Frequent. Customers may also experience the following: Vehicle has entered engine performance de-rate mode. NOTE: Engine performance de-rate mode will occur when the DTC has been set for a long period. This bulletin involves replaceing the DPF if DTC P2459 is set."

Wiper Doesnt Work or Stops Randomly On Glass

and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC):** P203E-00 - Reductant Level Sensor 1 Circuit Intermittent-Erratic. Customers may also experience one or more of the following: Repeated freeze/thaw cycles of the urea tank to cause solid DEF crystals to form and settle on the focus tube, blocking the level sensor signal. Rapid temperature swings from below freezing to above freezing causing an incomplete thaw of the DEF tank. When the vehicle is powered on, the diagnostic is enabled due to thawed DEF at the tank bottom surface, but the fluid in the center is still partially frozen. Not following the proper DEF fill procedure and overfilling the tank.** This bulletin involves replacing the urea delivery module and grade vent valve and updating the Dosing Control Unit (DCU) software."

Inspect & check all electrical connections to the alternator a. 2-way connector containing field control circuit & alternator sense voltage circuit. b. Unplug & plug-in the 2-way connector for field & sense circuit. Verify the connection is tight & check for any bent pins in alternator connector or damage to female terminals in connector. c. Check Alternator B+ Stud connection to be sure nut is securing positive cable terminal properly (i.e. nut is clamping terminal & connection is tight). d. Check fuse between the alternator B+ stud & PDC terminal to make sure it is not blown. e. Be sure to follow service manual sections on ALTERNATOR CONTROL CIRCUIT DIAGNOSTIC & ALTERNATOR SENSE CIRCUIT DIAGNOSTIC looking for any opens & shorts (to ground or battery voltage). 2. Check/verify all grounds in the charging system circuit a. Check tightness of mounting bolts securing alternator to engine block. Alternator is a case ground component. b. Check main ground from engine to chassis; connection must be tight. c. Check battery ground cable connections are tight. d. Potentially, loosen alternator mounting bolts, without removing alternator, and re-tighten to torque specifications in service manual. e. After all steps above are complete, re-start engine & check charging system operation. 3. Verify that the Smart Charging System is not the reason for alternator low voltage & current output (Amps). a. Alternator charging can be suspended during engine idle operation because of the Smart Charge strategy. b. Refer to service manual section ""System Operation - Smart Charging System"". c. Refer to Star Case S2008000031 Rev A for low charging voltage & Smart Charge Mode Voltage Range diagram & mode descriptions. d. The alternator has no internal regulator; thus, has no smart circuitry. All alternator control signals come from ECM. 4. If alternator is faulty, remove alternator & mounting bolts. Return alternator with bolts for analysis at QEC."

? Engine Stop Start (ESS) is inoperable.

Please verify the radio is at the latest available software level. If active DTCs are set, perform the appropriate diagnostic procedure in service information. If the condition is intermittent, refer to Section 29 Non-DTC Based Diagnostics and perform the diagnostic procedure related to the customer's complaint. If concern is still present or the customer has returned to the dealer multiple times for the same complaint, contact engineering FCA Redacted Content. If no answer or call back within 15 minutes, continue with regular diagnosis.

Diagnostic Trouble Code (DTC) P2580 ? Turbocharger Speed Sensor Circuit Low, Set.

(PTO) disable to high engine oil temperature (DD and DP Cab Chassis only)**. ? Customer may complain of slow PTO idle ramp up. ? Message will appear ?Hot Oil? and exit high idle or PTO mode, when in high idle or PTO mode and running between 10-30 minutes (no load). ? High frequency exhaust noise at idle after cold start. This bulletin involves reprogramming the PCM with the latest available software.

Pickup (DJ), 2022 and 2023 Ram 3500 Pickup (D2), 2022 and 2023 Ram 3500 Cab Chassis (DD) and 2022 and 2023 4500/5500 Ram Cab Chassis (DP) (Rev. B)

2024 Ram 2500 Pickup (DJ), 2022 - 2024 Ram 3500 Pickup (D2), 2022 - 2024 Ram 3500 Cab Chassis (DD) and 2022 - 2024 4500/5500 Ram Cab Chassis (DP) (Rev. C)

Pickup (DJ), 2022 - 2024 Ram 3500 Pickup (D2), 2022 - 2024 Ram 3500 Cab Chassis (DD) and 2022 - 2024 4500/5500 Ram Cab Chassis (DP) (Rev. C)

Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set: ? P203E-00 - Reductant Level Sensor 1 Circuit Intermittent-Erratic. This bulletin involves replacing the urea delivery module and grade vent valve and updating the Dosing Control Unit (DCU) software.

(PTO) disable to high engine oil temperature (DD and DP Cab Chassis only)**. ? Customer may complain of slow PTO idle ramp up. ? Message will appear ?Hot Oil? and exit high idle or PTO mode, when in high idle or PTO mode and running between 10-30 minutes (no load). ? High frequency exhaust noise at idle after cold start. This bulletin involves reprogramming the PCM with the latest available software.

Pickup (DJ), 2022 and 2023 Ram 3500 Pickup (D2), 2022 and 2023 Ram 3500 Cab Chassis (DD) and 2022 and 2023 4500/5500 Ram Cab Chassis (DP) (Rev. B)

This bulletin involves replacing the amplifier.

Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: **P0299 - Turbocharger Underboost.** P026B-00 - Injection Timing Performance. P061B-00 - Internal Control Module Torque Calculation Performance. P1451-00 - Diesel Particulate Filter System Performance. P0755-00 - Shift Solenoid ?B? (DG7 Trans Sales Code). P0765-00 - Shift Solenoid ?D?(DG7 Only). P0401-00 - EGR System Performance Customers may also experience the following: **Service Exhaust System message in the Electronic Vehicle Information Center (EVIC) with no MIL.** Improvements to cold temperature engine rpm fluctuation. Reduce audible engine flare during upshifts (DG7 Only). Improvements to help prevent OD clutch premature wear (DG7 Only). 1-2-1 gear hunting on grades while operating under high loads in areas of low traction (e.g. rain, snow, ice or dirt) (DG7 Only). wiTECH Fuel System Run-Up Test routine Improvement. Idle stability Improvement. wiTECH PCM data improvements. wiTECH cylinder cut-out routine, improvement. This bulletin involves reprogramming the Engine Control Module/Powertrain Control Module (ECM/PCM) with the latest available software.

Powertrain Control Module (PCM) with the latest available software.PCM software related to this Technical Service Bulletin (TSB) is included within the Y43 Recall. If not already completed, please perform the Y43 recall if the vehicle is on the recall VIN list. For all other vehicles perform the Repair Procedure below. Customers may experience the following: Idle Instability. The following improvements are also included in this update:wiTECH routine improvement, fuel system run-up test. wiTECH routine improvement, aftertreatment system performance test. Power Take Off (PTO) system improvements.

installed in the vehicle.

G)

If replacing the cylinder head cover/fuel injector harness gasket due to an oil leak, please also replace the following components: 1. 68445548A$ - Cover, Cylinder Head (includes gasket); 2. 05179087A$ - Housing, Rocker Arm; 3. 68005453A$ - Bolt and Grommet, Cylinder Head Cover to Cylinder Head (qty 6); 4. 05114418A$ - Gasket, Rocker Arm Housing; Engineering requires these parts for analysis to determine root cause of the leak. Once the repairs are complete, please contact FCA Redacted Content to set up a Fast Track for the return of the parts.

J)

Pickup (DJ), 2022 and 2023 Ram 3500 Pickup (D2), 2022 and 2023 Ram 3500 Cab Chassis (DD) and 2022 and 2023 4500/5500 Ram Cab Chassis (DP) (Rev. A)

Or Corrupted

to an oil leak, do NOT remove the seal from the retainer. Replace the seal and retainer (pn# 05086755A$) as a complete unit. Engineering needs to obtain the seals and retainers back for analysis without them having been disassembled. Once repairs are complete, please contact FCA Redacted Content to return the parts.

(DJ), 2022 Ram 3500 Pickup (D2), 2022 3500 Cab Chassis (DD) and 2022 4500/5500 Ram Cab Chassis (DP)

I)

When performing diagnosis, an internal engine concern may be suspected.

The customer may experience one or more of the following: Customer may complain of slow PTO idle ramp up. Message will appear "Hot Oil" and exit high idle or PTO mode, when in high idle or PTO mode and running between 10-30 minutes (no load). High frequency exhaust noise at idle after cold start.

Module/Powertrain Control Module (ECM/PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DTCs have been set: P0299-00 - Turbocharger Underboost. P026B-00 - Injection Timing Performance. P061B-00 - Internal Control Module Torque Calculation Performance. P1451-00 - Diesel Particulate Filter System Performance. P0755-00 - Shift Solenoid "B"(DG7 Trans Sales Code). P0765-00 - Shift Solenoid "D"(DG7 Only). P0401-00 - EGR System Performance. The following improvements are also included in this update:Improvements to cold temperature engine rpm fluctuation. Reduce audible engine flare during upshifts(DG7 Only). Improvements to help prevent OD clutch premature wear(DG7 Only). 1-2-1 gear hunting on grades while operating under high loads in areas of low traction (e.g. rain, snow, ice or dirt)(DG7 Only) wiTECH Fuel System Run-Up Test routine Improvement. Idle stability Improvement. wiTECH PCM data improvements. wiTECH cylinder cut-out routine, improvement.

Module/Powertrain Control Module (ECM/PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DTCs have been set: P0401-00 - EGR System Performance. P0299-00 - Turbocharger Underboost (ETM Only). The following improvements are also included in this update: wiTECH Fuel System Run-Up Test routine Improvement. Idle stability Improvement. wiTECH PCM data improvements. wiTECH cylinder cut-out routine, improvement

Lost Communication with Master Power Window Switch

J)

Pickup (DJ), 2022 and 2023 Ram 3500 Pickup (D2), 2022 and 2023 Ram 3500 Cab Chassis (DD) and 2022 and 2023 4500/5500 Ram Cab Chassis (DP) (Rev. A) (document published on 8/5/22 with incorrect date on communication of 8/4/22)

to an oil leak, do NOT remove the seal from the retainer. Replace the seal and retainer (pn# 05086755A$) as a complete unit. Engineering needs to obtain the seals and retainers back for analysis without them having been disassembled. Once repairs are complete, please contact FCA Redacted Content to return the parts.

J)

Pickup (DJ), 2022 and 2023 Ram 3500 Pickup (D2), 2022 and 2023 Ram 3500 Cab Chassis (DD) and 2022 and 2023 4500/5500 Ram Cab Chassis (DP) (Rev. A) (document published on 8/5/22 with incorrect date on communication of 8/4/22)

to an oil leak, do NOT remove the seal from the retainer. Replace the seal and retainer (pn# 05086755A$) as a complete unit. Engineering needs to obtain the seals and retainers back for analysis without them having been disassembled. Once repairs are complete, please contact FCA Redacted Content to return the parts.

Powertrain Control Module (PCM) with the latest available software.PCM software related to this Technical Service Bulletin (TSB) is included within the Y43 Recall. If not already completed, please perform the Y43 recall if the vehicle is on the recall VIN list. For all other vehicles perform the Repair Procedure below. Customers may experience the following: Idle Instability. The following improvements are also included in this update:wiTECH routine improvement, fuel system run-up test. wiTECH routine improvement, aftertreatment system performance test. Power Take Off (PTO) system improvements.

G)

G)

(DJ), 2022 Ram 3500 Pickup (D2), 2022 3500 Cab Chassis (DD) and 2022 4500/5500 Ram Cab Chassis (DP)

I)

When performing diagnosis, an internal engine concern may be suspected.

installed in the vehicle.

Customers may experience the following: Audible drone after initial start up or during idle.

All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.

(DJ), 2022 Ram 3500 Pickup (D2), 2022 3500 Cab Chassis (DD) and 2022 4500/5500 Ram Cab Chassis (DP)

I)

When performing diagnosis, an internal engine concern may be suspected.

C0037-2F LR WSS, but for which diagnostics are not finding any hardware problems, and for which the customer narrative includes comments about driving on highway rumble strips, please do not replace the axle, wheel speed sensors, harness, and/or ABS module. Engineering is working to determine a root cause, please clear the codes and encourage the driver to avoid rumble strips until a repair becomes available. If this issue does not describe your concern, please proceed with repair.

Module/Powertrain Control Module (ECM/PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P0401-00 - EGR System Performance. P0299-00 - Turbocharger Underboost (ETM Only). P0755-00 - 2C Solenoid Circuit. P0765-00 - UD Solenoid Circuit. The following improvements are also included in this update: wiTECH PCM data improvements. wiTECH cylinder cut-out routine, improvement

If no response in 15 minutes, proceed with repair.

(DJ), 2022 Ram 3500 Pickup (D2), 2022 3500 Cab Chassis (DD) and 2022 4500/5500 Ram Cab Chassis (DP)

I)

When performing diagnosis, an internal engine concern may be suspected.

Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DTCs have been set:U0132 - Loss of Communication with Air Suspension Control Module. C15E1-97 - Left Rear Air Spring Intake - Component or System Operation Obstructed or Blocked. C220C-48 - Active Suspension Module Internal-Supervision Software Failure(2019 MY Only). C211B-92 - Ignition Run/Start Input-Performance Or Incorrect Operation(2019 MY Only). C156C-7A - Ride Height System Air Leak-Fluid Leak Or Seal Failure(2019 MY Only). In addition the customer may describe:Air suspension system is inoperable. During key ?On? or while driving, the ?service air suspension? light illuminates. Air spring deflated or ruptured. Right/left rear suspensions sits lower than the other side. Chime and "Service Air Suspension Immediately" message appeared in the cluster for 5 seconds. Excessive operation or noise from air suspension system when vehicle is stationary(2019 MY Only). "Air Suspension Disabled" message when attempting Bed Lowering Mode (BLM)(2019 MY Only). Excessive compressor valve cycling following a cold start(2019 MY with Diesel engine only). Erroneous "Bed Low Achieved" message through the Instrument Panel Cluster (IPC), when requesting lowering, even though the truck didn't physically lower. Ride height changes/valve actuations without operator request on rough roads.

G)

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates

Output Shaft Seal should be considered in lieu of entire transfer case or driveshaft replacement. In the case of major damage to components, contact StarCenter and/or proceed with replacements as necessary.

Output Shaft Seal - sub component parts should be considered in lieu of entire transfer case or driveshaft replacement. In the case of major damage to components, contact StarCenter and/or proceed with replacements as necessary.

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels."

Output Shaft Seal - service part numbers 68161329AA OR 68449218AA (max tow application) - should be considered in lieu of entire transfer case or driveshaft replacement. In the case of major damage to components, contact StarCenter and/or proceed with replacements as necessary

to verify the values are within specification stated in the service procedures. 2- Swap the switch with the issue with the other side. This switch is used in both rear doors. If after the swap the issue is now present at the other door and the original door position no longer has the issue, replace the switch.

Mirror Contacts Door Window Glass In The Folded Position.

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.

primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.

Blind Spot Indicator On In Mirror For No Reason.

primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.

primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.

issue, replace the complete Rambox Bin and Lid assembly with all of the sub components instead of just replacing the Lid only.Please ship the complete Rambox Bin and Lid assembly without dis-assembling the lid or hinges to QEC. Please contact FCA Redacted Content to set up the part return to QEC. If no response in 15 minutes, proceed with repair.

Driver and/or passenger seat inoperative. This bulletin involves replacing the front power seat adjusters."

Adding Remote Start

This bulletin involves replacing the front driveshaft."

This bulletin involves replacing the front driveshaft."

his bulletin involves replacing the front driveshaft"

Adding Remote Start

Programmed

this is normal and not a defect.

This bulletin provides information regarding the correct oil grade to use on the 6.7L Cummins used in the 2023 to 2013 HD Trucks. The following information is intended to eliminate confusion.

Additional Diagnostics.

This bulletin involves replacing the front driveshaft.

C0604- Active Air Dam Control Performance

semi and full synthetic oils.

Occasionally, components are replaced before their standard life expectancy or when not contaminated with debris "

Occasionally, components are replaced before their standard life expectancy or when not contaminated with debri "

Occasionally, components are replaced before their standard life expectancy or when not contaminated with debris "

Diesel Exhaust Fluid (DEF) System Diagnostic Trouble Codes (DTCs) due to Hydrocarbon Contamination.

NOTE: This may happen more as the vehicle ages, especially if the vehicle is used extensively for towing or hauling heavy loads. The cause of the concern may be due to degradation of the rear axle fluid. It is very important to follow the routine maintenance schedules on these vehicles when it comes to changing the rear axle fluid if the vehicle is used primarily for towing or hauling heavy loads. If you experience a vehicle with the above condition, please perform the proper maintenance procedures for the rear axle and replace the fluid first before replacing any hardware components. NOTE: This service bulletin is only applicable to vehicles that have no history of an axle fluid replacement. If the vehicle usage includes police, taxi, fleet, off-road or frequent trailer towing, regular axle fluid changes are required every 3 years or 30,000 miles (whichever comes first) per the Maintenance Schedule in the vehicle Owner's Manual. This bulletin involves changing the rear axle lube to possibly address a chatter, shudder or vibration."

(DJ), 2021 - 2022 Ram 3500 Cab Chassis (DD), 2021 - 2022 Ram 3500 Pickup (D2) and 2021 - 2022 Ram 4500/5500 Cab Chassis (DP) (Rev. A)

Ram 3500 Cab Chassis (DD), 2021 - 2022 Ram 3500 Pickup (D2) and 2021 - 2022 Ram 4500/5500 Cab Chassis (DP) (Rev. A)

(DJ), 2021 - 2022 Ram 3500 Cab Chassis (DD), 2021 - 2022 Ram 3500 Pickup (D2) and 2021 - 2022 Ram 4500/5500 Cab Chassis (DP) (Rev. A)

Ram 3500 Cab Chassis (DD), 2021 - 2022 Ram 3500 Pickup (D2) and 2021 - 2022 Ram 4500/5500 Cab Chassis (DP) (Rev. A)

2022 Ram 4500/5500 Cab Chassis (DP)

If no response within 15 minutes, proceed with repair

lamps (headlamps, fog lamps, grille lamps, logo lamps or signature lamps) assemblies are fogged with a light layer of condensation on the inside of the lenses*

TPM Lamp On.

This bulletin involves replacing the inverter switch.

due to inconsistent operator installation effort, leading to latent BSR issue that manifests under customer usage conditions. Solution: remove and reinstall light guide to be fully seated in the bracket retainer.

Please follow the next steps to corroborate if the Headlamp Switch is malfunctioning: 1.- Please disconnect and reconnect the headlamp Switch. And verify if the issue is corrected. 2.- Review the internal resistance of the switch: a.- For the Right Dimmer (IP) between Pins 6 & 3. The value should be around 5.74 KOhms, when in the lowest position to 311 ohms in the top position (Parade Detent). b.- For the left Dimmer (Ambient Light) between pins 8 & 3. The value should be around 14.52 KOhms, when in the lowest position to 182 ohms in the top position. If a problem is found in the resistor values. Please replace the Switch.

TPM Lamp On.

Diagnostic Trouble Code (DTC) P227F ? Air Flow Restriction ? Air Leak Between Air Filter and MAF, Set.

Diagnostic Trouble Code (DTC) P227F ? Air Flow Restriction ? Air Leak Between Air Filter and MAF, Set.

Set.

Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): P0731-00 - Gear 1 Shift Incorrect Ratio. NOTE: This DTC will set during a key cycle and shifting into Drive. Customers may also comment on the following: The transmission will not shift into or out of 1st - 4th gears. 5th and reverse gears are still available. This bulletin involves replacing the K1 clutch and possibly the K1 input shaft drum sub-assembly.

the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): P0731-00 - Gear 1 Shift Incorrect Ratio (This DTC will set during a key cycle and shifting into Drive). Customers may also comment on the following: The transmission will not shift into or out of 1st - 4th gears. 5th and reverse gears are still available. **This bulletin involves replacing the K1 clutch and possibly the K1 input shaft drum sub-assembly. These repairs are to be performed only if the vehicle is inoperable due to K1 clutch failure. ** "

Upon further investigation, a technician may find the following Diagnostic Trouble Code (DTC) has been set: ? P0731-00 - Gear 1 Shift Incorrect Ratio (This DTC will set during a key cycle and shifting into Drive). Customers may also comment on the following: ? The transmission will not shift into/or out of 1st - 4th gears. 5th and reverse gears are still available. This bulletin involves replacing the K1 clutch drum snap ring and possibly the K1 input shaft drum subassembly.

Diagnostic Trouble Codes (DTCs) P0944 ? Loss of Hydraulic Pump Prime, and P0868 ? Transmission Fluid Pressure Low, Set.

Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find the following DiagnosticTrouble Code (DTC) has been set: P0731-00 - Gear 1 Shift Incorrect Ratio. This DTC will set during a key cycle and shifting into drive. Customers may also comment on the following: The transmission will not shift into/out 1st - 4th gears. 5th and reversegears are still available.

TSB 21-002-23 and do not order a complete transmission.

Customers may comment on one or more of the following: Harsh shifts. Poor shift quality, with light pedal.(Sales Codes ETM and ETN Only). Poor shift quality, 32-48 kph (20-30 mph), at low rpm with light to medium pedal apply, typically tipping in from zero pedal.(Sales Codes ETM and ETN Only). Coasting shift bump with exhaust brake and/or tow/haul active.(Sales Codes ETM and ETN Only). Poor shift quality, often when increasing pedal during a shift.(Sales Code ESB Only). Squawk/chirp/squeak type noise during a 3-4 upshift.(D2 Only). Poor 1-2 upshift quality.(D2 with ETM or DD/DP with Sales Code ESB Only).

Diagnostic Trouble Codes (DTCs) P0765 ? UD Solenoid Circuit, P0871 ? Transmission Fluid Pressure Sensor/Switch ?C? Circuit Performance, and/or P0755 ? 2C Solenoid Circuit, Set.

Order a "Z" part number for all Exchange Orders: Warranty, Mopar, Customer pay and Service contract. Order"68" part number for New unsold units only

the Powertrain Service Center (PTSC) Pre-Authorization Program ALL DEALERS"

Chassis (DD) to the Powertrain Service Center (PTSC) Pre-Authorization Program"

Library for specifications so a suitable alternative can be used

Some technicians have been using the brake pedal pad labor code which is not the same as the parking brake pedal pad. The correct labor operation code should be for parking brake pedal pad replacement is 05-05-06-01.

Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: C003A-2F - Right Rear Wheel Speed Sensor - Signal Erratic. C0037-2F - Left Rear Wheel Speed Sensor - Signal Erratic. Customers may also comment on the following: Automatic Brake System (ABS) lamp and Electronic Stability Control (ESC) lamp turn on when driving over rumble strips. This bulletin involves replacing one or both rear wheel speed sensors. "

illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):** **C2200-47 - Anti-Lock Brake Module Internal - Watchdog / Safety Auc Failure.** C006A-49 - Multi-Axis Acceleration Sensor - Internal Electronic Failure. Customers may also comment on one or more of the following: **Anti-lock Brake System (ABS) indicator light illuminated in the Instrument Panel Cluster (IPC). Electronic Stability Control (ESC) indicator light illuminated in the IPC. The Red Brake Warning indicator light illuminated in the IPC.** This bulletin involves reprogramming the ABS with the latest software available."

If you have part numbers; 68507366, 68483780, 68384226 or 68384225, these parts do not utilize a replaceable gel pad, only replace the sensor for a missing or damaged gel pad. For part numbers 68298334, 68298468, 68607452 or 68194700 the gel pad should be replaced during all windshield replacements and can be ordered through MOPAR, complete sensor replacement is not necessary. Contact: FCA Redacted Content for further questions If no response in 15 minutes, proceed with repair.

If you have part numbers; 68507366, 68483780, 68384226 or 68384225, these parts do not utilize a replaceable gel pad, only replace the sensor for a missing or damaged gel pad. For part numbers 68298334, 68298468, 68607452 or 68194700 the gel pad should be replaced during all windshield replacements and can be ordered through MOPAR, complete sensor replacement is not necessary. Contact: FCA Redacted Content for further questions If no response in 15 minutes, proceed with repair.

Due to brake vacuum pumps returned with trouble not found, please follow the proper diagnostics outline in the service library this also includes checking all electrical and vacuum hose connections prior to replacement of the vacuum pump. This will avoid unnecessary repair and potential charge back on the vacuum pump.

grease, or with excessive play, please contact FCA Redacted Content before replacing. If no response in 15 minutes, proceed with repair. For further diagnosis reference Service Library for Tech Tube video on Wheel Bearing Diagnosis.

response in 15 minutes, proceed with repair. If there is no visible damage to the original rain sensor it should be transfered to the new windshield using a new gel pad rather than replacing it.

defects (bubbling, delamination, wrinkling, etc.), please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair. Please send pictures of the leather defect to FCA Redacted Content.

or more of the following: ? **Intermittent Blue Screen (rear view camera still operable).** ? Radio wireless connectivity Inoperative. ? Screen Lockup, Slow Response (rear view camera still operable). ? Caller cannot hear the driver and/or driver cannot hear the caller. ? Cannot switch stations after a call, lockup due to the phone remaining on the call. ? Radio displays ?Code Error? or Lockup In Accessory Mode?. ? Display shows a black screen on start up (rear view camera still operable). ? SXMT presets are lost for all profiles. ? SXMT has no volume and stuck on channel. ? Radio does not allow BUS to go to sleep. ? AndroidT auto not connecting on vehicle start up. ? When radio is in light theme mode and in audio Balance/Fade menu, it is hard to see the position icon. Black on black coloring. ? Black out on SXMT after switching Profiles. ? During connecting phone radio does not handle audio source correctly when making a phone call. ? Climate buttons out of place and move to settle in correct location. ? In the shortcuts menu pulled down from the status bar, the right side arrow is highlighted as if it can be selected. ? Presets with 9Hold to Save99 numbered above 9 have text cutoff. ? Profile edit not allowed while in movement for 9Memory Seat9. ? While switching between Driver Profiles, Phone Notification Volume pops up. ? Inconsistently SiriT assistance. ? Compass does not work. ? Wireless device echo. ? Satellite antenna error message. ? Display flickers before SXMT background displayed. ? Radio 9home9 screen background is theme 1 background when Theme 2, theme 3 or theme 4 is selected. ? Mirror dimmer button when added in shortcut widget does not work while driving. ? Missing one shortcut in the custom shortcuts widget. ? Cluster does not display incoming phone call popup when in o

or more of the following: ? **Intermittent Blue Screen (rear view camera still operable).** ? Radio wireless connectivity Inoperative. ? Screen Lockup, Slow Response (rear view camera still operable). ? Caller cannot hear the driver and/or driver cannot hear the caller. ? Cannot switch stations after a call, lockup due to the phone remaining on the call. ? Radio displays ?Code Error? or Lockup In Accessory Mode?. ? Display shows a black screen on start up (rear view camera still operable). ? SXMT presets are lost for all profiles. ? SXMT has no volume and stuck on channel. ? Radio does not allow BUS to go to sleep. ? AndroidT auto not connecting on vehicle start up. ? When radio is in light theme mode and in audio Balance/Fade menu, it is hard to see the position icon. Black on black coloring. ? Black out on SXMT after switching Profiles. ? During connecting phone radio does not handle audio source correctly when making a phone call. ? Climate buttons out of place and move to settle in correct location. ? In the shortcuts menu pulled down from the status bar, the right side arrow is highlighted as if it can be selected. ? Presets with 9Hold to Save99 numbered above 9 have text cutoff. ? Profile edit not allowed while in movement for 9Memory Seat9. ? While switching between Driver Profiles, Phone Notification Volume pops up. ? Inconsistently SiriT assistance. ? Compass does not work. ? Wireless device echo. ? Satellite antenna error message. ? Display flickers before SXMT background displayed. ? Radio 9home9 screen background is theme 1 background when Theme 2, theme 3 or theme 4 is selected. ? Mirror dimmer button when added in shortcut widget does not work while driving. ? Missing one shortcut in the custom shortcuts widget. ? Cluster does not display incoming phone call popup when in o

information regarding the latest Firmware Over The Air (FOTA)update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio softwarewill be updated from R141.01.12, 139.01.53, 136.10.04 to R145.00.15.The national launch for the FOTA is expected to begin August 19, 2022. Customers may experience one or more of the following: Radio wireless connectivity Inoperative. Screen Lockup, Slow Response (rear view camera still operable). Caller cannot hear the driver and/or driver cannot hear the caller. Cannot switch stations after a call, lockup due to the phone remaining onthe call. Radio displays ?Code Error? or ?Lockup In Accessory Mode?. Display shows a black screen on start up (rear view camera still operable). SXM presets are lost for all profiles. SXM has no volume and stuck on channel. Radio does not allow BUS to go to sleep. Android auto not connecting on vehicle start up. When radio is in light theme mode and in audio Balance/Fade menu, it ishard to see the position icon. Black on black coloring. Black out on SXM after switching Profiles. During connecting phone radio does not handle audio source correctly whenmaking a phone call. Climate buttons out of place and move to settle in correct location. In the shortcuts menu pulled down from the status bar, the right side arrow is highlighted as if it canbe selected. Presets with "Hold to Save"" numbered above 9 have text cutoff. Profile edit not allowed while in movement for "Memory Seat". While switching between Driver Profiles, Phone Notification Volume popsup. Inconsistently Siri assistance. Compass does not work. Wireless device echo. Satellite antenna error message. Display flickers before SXM background displayed. Radio "home" screen background is theme 1 background when Theme 2, theme3 or theme 4 is selected. Mirr

(FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from R141.01.12, 139.01.53, 136.10.04 to R145.00.15.The national launch for the FOTA is expected to begin August 19, 2022. Customers may experience one or more of the following: Display shows a black screen on start up. SXM presets are lost for all profiles. SXM has no volume and stuck on channel. Radio does not allow BUS to go to sleep. Android auto not connecting on vehicle start up. When radio is in light theme mode and in audio Balance/Fade menu, it is hard to see the position icon. Black on black coloring. Black out on SXM after switching Profiles. During connecting phone radio does not handle audio source correctly when making a phone call using. Climate buttons out of place and move to settle in correct location. In the shortcuts menu pulled down from the status bar, the right side arrow is highlighted as if it can be selected. Presets with "Hold to Save"" numbered above 9 have text cutoff. Profile edit not allowed while in movement for "Memory Seat". While switching between Driver Profiles, Phone Notification Volume pops up. Inconsistently Siri assistance. Compass does not work. Wireless device echo. Satellite antenna error message. Display flickers before SXM background displayed. Radio "home" screen background is theme 1 background when Theme 2, theme 3 or theme 4 is selected. Mirror dimmer button when added in shortcut widget does not work while driving. Missing one shortcut in the custom shortcuts widget. Cluster does not display incoming phone call popup when in other screen than audio. Mirror Dimmer gets unhighlighted after being selected.

information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from R141.01.12, 139.01.53, 136.10.04 to R145.00.15. The national launch for the FOTA is expected to begin August 19, 2022. Customers may experience one or more of the following: Screen Lockup, Slow Response (rear view camera still operable). Caller cannot hear the driver and/or driver cannot hear the caller. Cannot switch stations after a call, lockup due to the phone remaining on the call. Radio displays ?Code Error? or ?Lockup In Accessory Mode?. Display shows a black screen on start up (rear view camera still operable). SXM presets are lost for all profiles. SXM has no volume and stuck on channel. Radio does not allow BUS to go to sleep. Android auto not connecting on vehicle start up. When radio is in light theme mode and in audio Balance/Fade menu, it is hard to see the position icon. Black on black coloring. Black out on SXM after switching Profiles. During connecting phone radio does not handle audio source correctly when making a phone call using. Climate buttons out of place and move to settle in correct location. In the shortcuts menu pulled down from the status bar, the right side arrow is highlighted as if it can be selected. Presets with "Hold to Save"" numbered above 9 have text cutoff. Profile edit not allowed while in movement for "Memory Seat". While switching between Driver Profiles, Phone Notification Volume pops up. Inconsistently Siri assistance. Compass does not work. Wireless device echo. Satellite antenna error message. Display flickers before SXM background displayed. Radio "home" screen background is theme 1 background when Theme 2, theme 3 or theme 4 is selected.

information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from R141.01.12, 139.01.53, 136.10.04 to R145.00.15. The national launch for the FOTA is expected to begin August 19, 2022. Customers may experience one or more of the following: Radio displays ?Code Error? or ?Lockup In Accessory Mode?. Display shows a black screen on start up. SXM presets are lost for all profiles. SXM has no volume and stuck on channel. Radio does not allow BUS to go to sleep. Android auto not connecting on vehicle start up. When radio is in light theme mode and in audio Balance/Fade menu, it is hard to see the position icon. Black on black coloring. Black out on SXM after switching Profiles. During connecting phone radio does not handle audio source correctly when making a phone call using. Climate buttons out of place and move to settle in correct location. In the shortcuts menu pulled down from the status bar, the right side arrow is highlighted as if it can be selected. Presets with "Hold to Save"" numbered above 9 have text cutoff. Profile edit not allowed while in movement for "Memory Seat". While switching between Driver Profiles, Phone Notification Volume pops up. Inconsistently Siri assistance. Compass does not work. Wireless device echo. Satellite antenna error message. Display flickers before SXM background displayed. Radio "home" screen background is theme 1 background when Theme 2, theme 3 or theme 4 is selected. Mirror dimmer button when added in shortcut widget does not work while driving. Missing one shortcut in the custom shortcuts widget. Cluster does not display incoming phone call popup when in other screen than audio. Mirror Dimmer gets unhighlighted after being selected.

Product Investigations) The customer may describe one of more of the following: ? **Radio displays a black screen (Rearview camera functions normally). ? Radio locks up (Rearview camera functions normally). ? Navigation location is inaccurate. ? Radio resets and/or reboots (Rearview camera functions normally). ? Carplay drops out.** ? Voice Recognition (VR) session does not open with wake-up word or steering wheel button. ? SXM 360L does not work without Wi-Fi connection. ? USB and/or wireless connectivity media playback issues This bulletin involves inspecting the software level and updating the software to: ? T25.47 - UPL or UPQ. ? T25.48 - UBL, UEL, UFL, UBQ, UEQ or UFQ.

Product Investigations) The customer may describe one of more of the following: ? **Radio displays a black screen (Rearview camera functions normally). ? Radio locks up (Rearview camera functions normally). ? Navigation location is inaccurate. ? Radio resets and/or reboots (Rearview camera functions normally). ? Carplay drops out.** ? Voice Recognition (VR) session does not open with wake-up word or steering wheel button. ? SXM 360L does not work without Wi-Fi connection. ? USB and/or wireless connectivity media playback issues This bulletin involves inspecting the software level and updating the software to: ? T25.47 - UPL or UPQ. ? T25.48 - UBL, UEL, UFL, UBQ, UEQ or UFQ.

This bulletin involves creating a space between two frame sections and adding wax.

This bulletin involves creating a space between two frame sections and adding wax.

This bulletin involves inspecting the steering column for noise and possibly replacing the steering column intermediate shaft.

Announces the addition of the Rear AxleAssembly replacementfor 2019 - 2024 RAM 3500 Cab Chassis (DD), RAM 4500/ 5500 Cab Chassis (DP), RAM 3500 Pickup (D2), RAM 2500 Pickup (DJ), RAM 1500 Pickup (DS) and RAM 1500 Pickup (DT)vehicles to the Powertrain Pre-Authorization program to ensure proper repair of Rear AxleAssembly failures and to assist in quality improvements. REV.A

Chassis (DD), RAM 4500/ 5500 Cab Chassis (DP), RAM 3500 Pickup (D2), RAM 2500 Pickup (DJ), RAM 1500 Pickup (DS) and RAM 1500 Pickup (DT) vehicles to the Powertrain Pre-Authorization program for all dealers (Base, Plus & Premium) to ensure proper repair of Rear Axle Assembly failures and to assist in quality improvements. REV.A

B)

A - Panasonic VP4R Wi-Fi New Enrollment Pause was uploaded for this communication during publishing and was corrected with S228A000009 Rev. A

"

No further parts distribution will be taking place. All distributed parts would cover all sold and unsold needs. Please use all stock that your dealer has before asking for parts assistance. If part assistance is still required, please provide the following information to your Area Manager for review: 1. Dealer Code 2. Last eight digits of VIN 3. Appointment date/vehicle VOR at dealer Thank you, Mopar

Falsely.