2014 Prevost X3-45 TSBs

The gasket thickness was increased from 1.5 mm to 3 mm to prevent interference between the collar ends, which previously...

Air Tanks Draining Sequence.

Air Tanks Draining Sequence

X3 SERIES ENVIROCARE - IONS AIR SANITIZER

X3 SERIES ENVIROCARE - IONS AIR SANITIZER

Communication letter from Accociate Administration for Enforcement, NHTSA From Prevost Subject Vehicle Brand: Prevost...

On the vehicles affected by this bulletin, replace the AHI dozer by an improved part preventing nozzle clogging.

This Instruction Sheet explains how to add Sunshade Switches on the Dashboard

PREVOST VEHICLE DISINFECTION PROCEDURE Revision A

Accessory air filter replacement Replaces 642192

Repair instructions to address fault codes P20E892 Reductant Pressure Too Low - Performance orincorrect operation

Repair instructions to address fault codes P203F00 Reductant Level Low

Repair instructions to address fault codes P10CE97 Reductant Return: No Flow Detected - Componentor System Operation...

Repair instructions to address fault codes P029800

Repair instructions to address fault codes P207F-00; P20EE-00

Repair instructions to address fault codes P207F-00 - Reductant Quality

Repair instructions to address fault codes P008A-00; P0087-00

PREVOST VEHICLE DISINFECTION PROCEDURE

HAND SANITIZER DISPENSER INSTALLATION

On the vehicles affected by this bulletin, replace the horn support by 140034.

This Instruction Sheet prvides a Road Side and Workshop Instructions for Replacing 040949 6mm DEF Hose to a 4mm ID Hose.

On the vehicles affected by this bulletin, replace the two auxiliary equipment decals in the first two road side parcel...

On the vehicles affected by this bulletin, inspect the rear junction box connections; clean terminals and apply black...

On the vehicles affected by this bulletin, inspect the lower oil fill tube flexible tube.

On the vehicles affected by this bulletin, inspect the side of the matte finish on the anti-glare shield

On the vehicles affected by this bulletin, perform the replacement of the kneeling alarm buzzer assembly.

On the vehicles affected by this bulletin, replace the radiator fan driveshaft by an improved version having a stronger...

On the vehicles affected by this bulletin, replace hardware on the aisle step curb side nosing.

On the vehicles affected by this bulletin, replace the two auxiliary equipment decals in the first two road side parcel...

On the vehicles affected by this bulletin, five foot switches might be working intermittently and needs to be replaced.

On the vehicles affected by this bulletin, inspect the lower oil fill tube flexible tube.

On the vehicles affected by this bulletin, change the lower blind guide supports for a new style with two anchor screws.

On the vehicles affected by this bulletin, inspect the side of the matte finish on the anti-glare shield

ON THE VEHICLES AFFECTED BY THIS BULLETIN, REPLACE THE PITMAN ARM NUT AND RE-TORQUE TO SPECIFICATION.

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

PREVOST: DUE TO INTERMITTENTLY WORKING, THE FIVE FOOT SWITCHES, ON SOME BUSES, WILL BE REPLACED.

PREVOST: REAR JUNCTION BOX CONNECTIONS NEED INSPECTED WITH CLEAN TERMINALS AND TERMIN8R LUBRICANT OR BLACK COLOR GUARD...

ELECTRIC FAN DRIVE COOLING SYSTEM CONVERSION WITH DELCO REMY ALTERNATOR.

ELECTRIC FAN DRIVE COOLING SYSTEM CONVERSION WITH BOSCH ALTERNATOR.

BOSCH HD10 ALTERNATOR DIAGNOSTIC GUIDE Revision B To avoid replacement of alternators that are in fact in good...

ELECTRIC FAN DRIVE COOLING SYSTEM CONVERSION WITH DELCO REMY ALTERNATOR - X3 SERIES US10 UP TO GHG17 COOLING SYSTEM

ELECTRIC FAN DRIVE COOLING SYSTEM CONVERSION WITH BOSCH ALTERNATOR

ELECTRIC FAN DRIVE COOLING SYSTEM CONVERSION WITH BOSCH ALTERNATOR - X3 SERIES US10 UP TO GHG17 COOLING SYSTEM

ELECTRIC FAN DRIVE COOLING SYSTEM CONVERSION WITH DELCO REMY ALTERNATOR

GENERAL HOISTING AND TOWING PROCEDURES Revision: B Updated 2.1 to show rubber chocks, secure front and rear.

ELECTRIC FAN DRIVE COOLING SYSTEM CONVERSION WITH BOSCH ALTERNATOR Revision B: Parts obsolete: 050303, 391028, 562112 ...

ELECTRIC FAN DRIVE COOLING SYSTEM CONVERSION WITH DELCO REMY ALTERNATOR REVISION : B Parts obsolete: 050303, 391028,...

Repair instructions to address fault codes U02A200 Lost Communication with Reductant Quality Module

Repair instructions to address fault codes U029E00 Lost Communication With NOx Sensor "B"

Repair instructions to address fault codes U029D00 Lost Communication With NOx Sensor "A"

Repair instructions to address fault codes P242A15 Exhaust Gas Temperature Sensor Bank 1 Sensor 3 - Circuit Short To...

Repair instructions to address fault codes P208464 Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1...

Repair instructions to address fault codes P204A13 Reductant Pressure Sensor - Circuit Open

Repair instructions to address fault codes P203115 Exhaust Gas Temperature Sensor Bank 1 Sensor 2 - Circuit Short To...

Repair instructions to address fault codes P054415 Exhaust Gas Temperature Sensor Bank 1 Sensor 1 - Circuit Short To...

Added: Power cables for L.H.

This instruction sheet shows how to replace kneeling level sensor #21643575 by sensor #22194741.

This instruction sheet shows how to replace kneeling level sensor #21643575 by sensor #22194741.

This instruction sheet explains how to perform alternator conversion, from Bosch to Delco Remy, on X3 vehicles

This instruction sheet explains how to perform alternator conversion, from Bosch to Delco Remy, on X3 vehicles

On the vehicles affected by this bulletin, vibration is causing damage to A/C compressor and compressor harness connectors.

On the vehicles affected by this bulletin, the Bosch HD10 alternators need to be replaced with new Bosch HD10PLBH 150...

On the vehicles affected by this bulletin, install a diffuser pipe thermal insulating wrap to promote higher exhaust...

On the vehicles affected by this bulletin, the end of the exhaust diffuser drain tube may not be properly attached.

On the vehicles affected by this bulletin, the end of the exhaust diffuser drain tube may not be properly attached.

On the vehicles affected by this bulletin, protect the A/C suction hose (Issue "A") and modify the pipe clamp...

On the vehicles affected by this bulletin, the Bosch HD10 alternators need to be replaced with new Bosch HD10PLBH 150...

On the vehicles affected by this bulletin, inspect the Bosch HD10 alternator connections.

On the vehicles affected by this bulletin, tighten the alternator return pulley mounting bolt to a specific torque.

On the vehicles affected by this bulletin, inspect fare box harness connector A132B pin out.

This bulletin explains how install an extension to the linear thermal detector (LTD) over the alternators

New aramid cord poly-v belts are now available to replace the polyester cord alternator belts previously used on Prevost...

On the vehicles affected by this bulletin, vibration is causing damage to A/C compressor and compressor harness connectors.

On the vehicles affected by this bulletin, replace the battery box decals.

On the vehicles affected by this bulletin, install a diffuser pipe thermal insulating wrap to promote higher exhaust...

On the vehicles affected by this bulletin, protect the A/C suction hose (Issue "A") and modify the pipe clamp...

ON THE VEHICLES AFFECTED BY THIS BULLETIN, VIBRATION IS CAUSING DAMAGE TO A/C COMPRESSOR AND COMPRESSOR HARNESS CONNECTORS.

PREVOST: BOSCH HD 10 ALTERNATOR CONNECTIONS, ON SOME BUSES, NEED TO BE INSPECTED AND MAY NEED OTHER PARTS AND MATERIALS, IF REQUIRED.

KIT POWER STEERING TANK CONVERTION CUMMINS TO ZF WITH D13 ENGINE

Improved bearings are now available to replace the original bearings used on some Prevost vehicles idler pulleys.

Diesel Exhaust Fluid ( DEF ) Contamination In Fuel System, Inspection And Repair From US10 to newer engine generation

Bendix M-32QR ABS modulator valve replaced by new M-40QR valve.

INTRODUCING A NEW ENGINE COOLANT INTO PREVOST SERVICE CENTER NETWORK

Rev A: Mention added concerning DDC Series 60 engine SCA requirement

INTRODUCING A NEW ENGINE COOLANT INTO SERVICE

ENGINE OIL & FILTER CHANGE INTERVALS - VOLVO D13 ENGINE, FROM US10 Revision: A Updated for OBD20 engines

Engine Exhaust Gas Recirculation Differential Pressure - Mechanical system not responding properly US13 US20...

Engine Exhaust Gas Recirculation Differential Pressure - Mechanical system not responding properly US13 US20...

Repair instructions to address fault codes P040200 Engine Exhaust Gas Recirculation 1 Valve PositionFlow Excessive...

Repair instructions to address fault codes P256000 Engine Coolant Level Low

Repair instructions to address fault codes P204713 Reductant Injection Valve Control Bank 1 Unit 1 Circuit Open

Repair instructions to address fault codes P107017 Gearbox Brake Valve (VAGB) - Circuit voltage above threshold

Repair instructions to address fault codes P052400 Engine Oil Pressure Too Low

Repair instructions to address fault codes P040200 Engine Exhaust Gas Recirculation 1 Valve PositionFlow Excessive...

Repair instructions to address fault codes P021700 Engine Coolant Over Temperature Condition

This instruction sheet explains how to install the Electric Cooling System Conversion kit (with Delco Remy Alternators)...

On the vehicles affected by this bulletin, the T-Key cylinder lock must be disassembled and lubricated, the latch pin...

This instruction sheet explains how to install the Electric Cooling System Conversion kit (with Delco Remy Alternators)...

On the vehicles affected by this bulletin the rear junction box decal located in the right engine compartment is...

This Instruction Sheet explains how to install a "T" Key on curbside Engine Compartment Door

On the vehicles affected by this bulletin, ?Fast idle? and ?Cancel First Reading Lamp? switches on the dashboard may not...

On the vehicles affected by this bulletin, perform software updates of the Engine Management System (EMS) and instrument cluster.

On the independent front suspension level valve linkage of the vehicles affected by this bulletin, a control rod may...

On the vehicles affected by this bulletin, connect a tube and muffler to the kneeling valve exhaust and route it to the...

On the vehicles affected by this bulletin, perform a software update of ECM (Engine Control Module) and ACM...

Explains that improved bearings are now available to replace the original bearings used on some Prevost vehicles idler...

On the vehicles affected by this bulletin, perform software updates of the Engine Management System (EMS) and instrument cluster.

On the independent front suspension level valve linkage of the vehicles affected by this bulletin, a control rod may...

"THIS MAINTENANCE INFORMATION DESCRIBES THE STEPS TO BE FOLLOWED ON YOUR COMPUTER TO ADD THE VOLVO ENGINE BRAKE AUTO MODE ON THE VEHICLE.

PREVOST: WARRANTY ISSUED, ON SOME BUSES, REGARDING CONTROL ROD OF INDEPENDENT FRONT SUSPENSION LEVEL VALVE, CONTACTING ...

Sway bar collars improvement.

SWAY BAR COLLARS IMPROVEMENT

TAG AXLE HUB FLANGE - ALTERNATE CAP SCREW

RONT & TAG AXLE UNITIZED HUB BEARING END PLAY VERIFICATION AND REPLACEMENT

On the vehicles affected by this bulletin, replace the front axle wheel hub bearing unit with an improved version.

On the vehicles affected by this bulletin, replace the hardware on the sway bar clamps of the steer and drive axles.

On the vehicles affected by this bulletin, replace the hardware on the sway bar clamps of the steer and drive axles.

On the vehicles affected by this bulletin, modify the hubodometer support to allow the wheel to be taken out without...

On the vehicles affected by this bulletin, replace the front bumper retaining spring.

PREVOST: INFORMATION PROVIDED ON CERTAIN BUSES, THE SWAY BAR CLAMPS OF STEER AND DRIVE AXLES NEED HARDWARE REPLACED.

STEERING GATEWAY. Revision B - PIN 2 and 10 were inverted on connector A139

STEERING GATEWAY, revision A : Cancel watch dog removal from EFD part of the instruction

STEERING GATEWAY Revision A Cancel watch dog removal from EFD part of the instruction

TIE ROD 610052 FIRST INSTALLATION INSTRUCTIONS: Use these instructions when replacing the drop joint tie rod on S82, S84 / S84U I-beam axles.

Vehicles identified below are compatible with a new tie rod design.

POWER STEERING PUMP DISCHARGE HOSE (PRESSURE) REPLACEMENT

This instruction sheet explains how to perform the replacement of the power steering pump discharge hose (PRESSURE)...

On the vehicles affected by this bulletin, replace the power steering supply hose.

PREVOST: THE SUPPLY HOSE FOR POWER STEERING NEEDS BE REPLACED ON SOME BUSES.

AUTOMATIC FIRE SUPPRESSION SYSTEM - TAMPER SEAL REPLACEMENT

Plexiglass Panel Behind Driver X3

On the vehicles affected by this bulletin, replace the hardware on the sliding door of the wheelchair seating area.

On the vehicles affected by this bulletin, the windshield washer bottle may not be identified.

On the vehicles affected by this bulletin, replace the hardware on the sliding door of the wheelchair seating area.

On the vehicles affected by this bulletin, the entrance door may open inadvertently or not open at all when door open...

On the vehicles affected by this bulletin, perform various improvements on the bi-fold door mechanism.

PREVOST: ON SOME BUSES, THE BI-FOLD DOOR MECHANISM NEEDED VARIOUS IMPROVEMENTS PERFORMED ON IT.

PREVOST: WHEN BUTTON TO DOOR IS PRESSED TO OPEN, ENTRANCE DOOR, ON SOME BUSES, INADVERTENTLY, WILL OPEN AND NOT OPEN AT ALL.

VOLVO I-SHIFT TRANSMISSION REPLACEMENT - DIFFERENCE BETWEEN CONNECTIONS AT THE TOP OF THE OIL FILTER HOUSING

VOLVO I-SHIFT TRANSMISSION REPLACEMENT - DIFFERENCE BETWEEN CONNECTIONS AT THE TOP OF THE OIL FILTER HOUSING

JERKY, NOISY OR HARD TO TURN STEERING GEARBOX.

Repair instructions to address fault codes P107575 Clutch System - Emergency position not reachable

Repair instructions to address fault codes P105998 Gearbox Oil Temperature Sensor - Component orsystem over temperature

NEUTRAL GEAR - SOFTWARE UPDATE

This Maintrenance infomration explains that the Castrol Syntrans oil isn?t fully approved for 500 000 miles (800 000 km)...

Air Tanks Draining Sequence.

STORAGE AND STARTUP GUIDELINES : part number updates

On the vehicles affected by this bulletin, perform a software update of the Actia Tachometer at the rear of the vehicle.

On the vehicles affected by this bulletin, replace sun visor on the left side of the driver?s seat by an updated...

On the vehicles affected by this bulletin, replace sun visor on the left side of the driver's seat by an updated...

PREVOST AWARE ADAPTIVE CRUISE BRAKING (ACB) FLR20 RADAR SENSOR REPLACEMENT KIT Revision A: KIT IS13169-1 & IS13169-2...

PREVOST AWARE ADAPTIVE CRUISE BRAKING (ACB) - FLR20 & FLR21 RADAR SENSOR ALIGNMENT

On the independent front suspension (IFS) of the vehicles affected by this bulletin, check and make sure that there is...

On the vehicles affected by this bulletin the brake hose may come in contact with the air spring support when the front...

PREVOST: WHEN BUS IN POSITION OF LOW OR HIGH BUOY, BRAKE HOSE WILL CONTACT AIR SPRING SUPPORT AND WOULD NEED INSPECTED...

CENTRAL HVAC MERV FILTERS INSTALLATION

EBERSPACHER PREHEATER INSTALLATION In replacement of Spheros & Valeo preheaters

CENTRAL HVAC MERV FILTERS INSTALLATION REVA

This Maintenance Information explains how to run a n Air Conditionning performance test

STORAGE AND STARTUP GUIDELINES: Periodically, circumstances arise requiring operators to temporarily park a coach in storage.

STORAGE AND STARTUP GUIDELINES Revision: B Parts added to Suggested Material 08-10-2020

STORAGE AND STARTUP GUIDELINES - ALL PREVOST VEHICLES & VOLVO 9700

This instruction sheet shows how to install a flap over the diesel filling cap.

This instruction sheet shows how to install a flap over the diesel filling cap.

This instruction sheet shows how to install a flap over the diesel filling cap.

Halogen to LED fog light replacement kit.

STORAGE AND STARTUP GUIDELINES: Rev A: 21516229 replaced by 23381562 20523393 replaced by 21454749 800383 removed ...

Revision : Mention added stating to disable Prime & parts added in the kit.

This instruction Sheet explains how to install a seatbelt cutter in the driver's area