2007 Prevost X3-45 TSBs

made it impossible to reach the specified tightening torque. Increasing the gasket thickness ensures sufficient clearance between the collar ends and thus guarantees optimal tightening.

Revision: A - Erroneous Secondary & Accessory tanks location.

mechanism issue, perform the following procedure.

Revision A : Add front sway bar support replacement and change bolts lenght.

BEARINGS MUST BE INSPECTED AT INTERVALS OF 30,000 MILES (48 000KM). KING PINS SHOULD BE SERVICED EVERY 6, 250 MILES (10,000 KM) OR TWICE A YEAR. ALSO INCLUDED MODEL VIP-45 MTH MODEL YEARS 2004-2008. MODEL XLII MTH MODEL YEARS 2004-2008. *JS

*KB

The new tie rod will be adjusted to the length of the original; however, a steering alignment needs to be performed after replacement.

This new tie rod 610052 has updated ball joints and a fine adjuster sleeve. It replaces former drop type ball joint tie rods. Refer to IS-18091 for installation instructions. This document details maintenance inspection and toe-in adjustment with the new design tie rod.

selector model VSS05, an interface harness is required to connect the vehicle harness to the new sound selector model and a new VSS05 compatible radio unit must also be installed. This procedure describes the steps required to perform this update.

side alternator & fan drive breaker box

the HVAC module as described in instruction sheets IS-19923.

A FAULTY DIODE WILL CAUSE THE BURNING OF THE FUSE PROTECTING THE CIRCUIT. ALSO INCLUDED MODEL XLII-40, XLII-45 MOTORHOMES & ENTERTAINER XLII-45. MODEL YEARS 2007-2008. MODEL VIP MOTORHOMES. MODEL YEARS 2006-2007. *JS

MODELS INCLUDE XLII MTH, AND H3VIP MTH. MODEL YEARS ARE 2008-2011. *KB

Whether it is a few weeks or several months, sporadic out of service times or a full stop, Prevost recommends following the guidelines in this document during times when: The coach can be operated on a regular/weekly basis while in storage. The coach will be in storage for an extended period without any operation. The coach will return to service following an extended period of downtime.

IF BEADS ARE MISSING COULD CAUSE FATIGUE OR CRACKING. MODELS X3-45 COACHES. MODEL YEAR 2007-2008. *JS

Revision: B - General Update

HYDRAULIC END LIMITER ADJUSTMENT. All models equipped with RB Bosch/ZF Servocom or Servocomtronic steering gearbox

Revision: C - Advanced kits canceled

611471 replaced by 611360 70376808 replaced by 21036050 21396642 replaced by 20967831

THE PURPOSE OF THE FOLLOWING PROCEDURE IS TO FACILITATE THE JOB AND TO HELP IDENTIFY THE DIFFICULT AREAS. ALSO INCLUDED MODELS HE-41 AND HE-45 COACHES MODEL YEARS 1998-2008; MODEL XLII AND X3-45 COACHES MODEL YEARS 1998-2008. *JS