2017 Porsche Panamera TSBs
729 Technical Service Bulletins across 17 categories
Categories
Other
188 bulletinsTechnical Information for Damage to Nano Plug Contacts Due to Utilization of Incorrect Measuring Equipment
Special Tools and Equipment Information for Diagnostic Equipment Standards for all USA Porsche Centers
Parts Information for Parts Withdrawal - Coolant Regulator Housing
Symptom-based workshop manual for Reversing Camera Spray Nozzle Not Working - Dirty/Clogged/Air in the System
Porsche Approved Collision Center Acquiring Special Tools and Equipment
Porsche Approved Collision Center Acquiring Special Tools and Equipment
Parts Withdrawal - Various Parts
Parts Withdrawal - Various Parts
Porsche Approved Collision Center Acquiring Special Tools and Equipment
Tech live look information bulletin for How to use Frontline.io on the HoloLens 2
Tech live look information bulletin for how to use fronline.io on mobile devices and tablets.
Symptom based workshop manual for Information Message Key (Remote Control (Hand-Held Transmitter)) Not Found / Faulty,...
Read full bulletin
Fault Memory Entry Regarding Key B19B6F0 in Instrument Cluster Control Unit
Parts information for Parts Withdrawal - Oil Pressure Sender.
Read full bulletin
The vehicles affected are ones that use the part number PAB906060.
Parts information for parts withdrawal involving various parts.
Read full bulletin
The vehicles affected are ones that use the part numbers mentioned. Part numbers: 0PD145703E, 0PD145703H, 0PD907123G, 0PD907123K
Symptom based workshop manual involving the Belt Lock Warning on Driver's Side Permanently Active in Conjunction with...
Read full bulletin
Fault Memory Entry with Regard to Belt Lock Switch "B101C07". The vehicles affected are listed in the attached PDF.
Parts information for parts withdrawal - CTRL UNIT.
Read full bulletin
Part number 9J1035287C. The vehicles involved are ones that use the part number mentioned.
Parts information for parts withdrawal involving the cover - 95C867769A.
Read full bulletin
The vehicle(s) affected are ones that use the part number mentioned.
Technical information for Damage to Nano Plug Contacts Due to Utilization of Incorrect Measuring Equipment
Special tools and equipment information for PACC information
Parts information for parts withdrawal involving (95C615269E) Coolant Pump.
Read full bulletin
The vehicles affected are ones that use the part number mentioned
Parts information for parts withdrawal involving the bellows.
Read full bulletin
Part number 9P1501136 is affected. The vehicles affected are ones that use the part number mentioned.
Parts information for parts withdrawal involving the lock 95C827447A.
Read full bulletin
The vehicles affected are ones that use the part number listed.
Parts information for parts withdrawal involving the coolant pump.
Read full bulletin
Part numbers involved are 0PB121010G and 0PB121005E. The vehicles affected are cars that use the part numbers mentioned.
Parts information for parts withdrawal involving the coolant pump.
Read full bulletin
The part number involved is PAB121014C. The vehicles affected are cars that use the part number mentioned.
Parts information for parts withdrawal involving the power mod - 95B941329A.
Read full bulletin
the vehicles affected are ones that use the part number mentioned.
Technical information for Information on Y-Measuring Cables and Possible Locations
Parts information for parts withdrawal involving the actuating lever.
Read full bulletin
The part numbers mentioned are in the attached PDF
Parts information for parts withdrawal involving the Thermostat (PAB121115C).
Read full bulletin
The cars affected are ones that use this part number.
Parts information for parts withdrawal involving the thermostat on certain vehicles.
Read full bulletin
The cars affected are cars that use part number PAB121115D
Parts information for Parts Withdrawal - Warning Sign (1EA010505).
Read full bulletin
The vehicles affected use the part number mentioned.
Parts information for parts withdrawal involving the belt latch.
Read full bulletin
9Y0857755D and 9Y0857755E, the vehicles affected use the part numbers mentioned.
Parts information for Parts Withdrawal - Air Line (9Y1616719 & 9Y2616719).
Read full bulletin
The vehicles affected are cars that use the part numbers mentioned
Parts information for parts withdrawal involving the belt latch.
Read full bulletin
Part numbers 9Y0857755D & 9Y0857755E are involved. The vehicles considered would use the part numbers mentioned.
Parts information for parts withdrawal involving the belt latch - part numbers 992857756E & 992857755D.
Read full bulletin
The vehicles affected are cars that use the part numbers mentioned
Special tools and equipment information for snap-on (SBS) pricing adjustments
Tech live look information for dynamics 365 remote assist environment verification steps.
Read full bulletin
Includes all Porsche models
Tech live look information for dynamics 365 remote assist user guide
Parts information for parts withdrawal involving Adhesive Tape (9GT827972B).
Read full bulletin
The vehicles are not listed, but the affected cars are ones that use the part number mentioned.
Parts information for Parts Withdrawal -Coolant pipe (PAB12113103).
Read full bulletin
Vehicles not listed, but the affected cars are ones that use part number PAB12113103
Parts information for parts withdrawal involving all the part numbers below.
Read full bulletin
The vehicles affected are cars that use the part numbers in the PDF. 9Y0919620E, 9Y1919599H, 9Y2919599H, 976919597E, 976919599F, 977919599F, 9J1919597AE, 9J1919599AF, 9J1919599AG, 992919597AH, 992919597AJ
Parts information for parts withdrawal involving the part numbers below.
Read full bulletin
The vehicles affected are cars that use the part numbers listed. 971260601SX, 971260601SU, 971260601RU, 971260601QX, 971260601QU, 971260601Q
Parts information for parts withdrawal involving part number 9A7317801D.
Read full bulletin
The vehicles affected are cars that use the part number.
Parts information for parts withdrawal involving the high pressure injector (0PB128615C)
Parts information for parts withdrawal involving various parts.
Read full bulletin
Please refer to the attached PDF for list of affected part numbers.
Technical information Loss of a Drivers Key While Transporting the Vehicle
Special tools and equipment information for New MRT Toolbox Foam Organizational System
Tech live look information for dynamics 365 remote assist application.
Read full bulletin
Please ignore previous submission for this as this provides the correct date.
Parts information for parts withdrawal involving the 2k pane adhesive.
Read full bulletin
Vehicles affected are cars that use part number 00004330535
Tech live look information for dynamics 365 remote assist application
Technical information for WRE7 - Re-Programming Porsche Rear Seat Entertainment
Parts information for parts withdrawal involving the 2k pane adhesive.
Read full bulletin
The vehicles affected are cars that use part number 00004330535
Parts information for parts withdrawal involving all the part numbers listed in the PDF.
Read full bulletin
The vehicles affected are cars that use the mentioned part numbers.
Parts information for Parts Withdrawal - Adhesive Tape (9GT827972B).
Read full bulletin
Vehicles affected are cars that use part number 9GT827972B
Tech live look information on transition to dynamics 365 remote assist
Special tools and equipment information for data signal strength and speed in the Porsche Center - MRT Requirments
Special tools and equipment information for model logo templates available for rent.
Read full bulletin
The affected vehicles are cars that are listed in the attached PDF.
Tech live look information for all Porsche models - inspectron tools product improvement communication
Parts information for parts withdrawal involving 992501201K.
Read full bulletin
The vehicles affected are cars that use the part number in the PDF.
Parts Information - Parts Withdrawal - Hexagon Flange Screw (Combi)
Parts information with parts withdrawal involving the hydro-mounting - 992199384F The affected vehicles are cars that...
Read full bulletin
use the part number mentioned.
Parts information for parts withdrawal involving the oil separator.
Read full bulletin
The affected vehicles are cars that use part number 0PC115099A
Special tools and equipment information for the WiScope UV upgrade - affecting all Porsche models
Technical information for WPK9 - check crankcase ventilation plug connection
Special tools and equipment information for the mobile data signal strength in the workshop
Information on a air separator membrane failure
Parts information for parts withdrawal involving the booster - 7PP035223M, 7PP035223AA, 99164548000.
Read full bulletin
Vehicles affected are cars that use the part numbers listed.
Parts information for parts withdrawal involving the chain tensioner - 0PB109507D
Parts information for parts withdrawal involving the seat frame - 992885456CY
Parts information for parts withdrawal involving the booster - 7PP035223M, 7PP035223AA, and 99164548000
Parts information for parts withdrawal involving the wire set - 976971227 & 976971227A
Parts information for parts withdrawal involving the ball screw - PAF004835
Special tools and equipment information VAS6292 Hunter Aligner License Program Change
Technical information for a loss of drivers key while transporting vehicle
Special tools and equipment information for launch tools on the Panamera
Parts information for parts withdrawal for spoiler matt black/drive unit
Technical information for an assessment of cracks on elastomer bearings on the front and rear axles.
Special tools and equipment information for the Boxster, Cayman, 911, and Panamera
Installation and conversion instructions for the snow chain
Technical information for rear spoiler control unit replacement
Instructions on advanced technical information for the permanent diagnostic trouble codes
Technical information on WMM7 - replacing VTS control unit
Special tools and equipment information for all Porsche models.
Read full bulletin
Diagnostic equipment standards.
Special tools and equipment information for the Pico Oscilloscope Extended Functionality
Parts information for parts withdrawal on the locks made to original key code
Parts information on parts withdrawal for the oil pump
Installation and conversion instructions for the front camera
42.000.048
Special tools information on an upgrade to the pushers for the VAS5237
Porsche intranet posting with information on replacing external coolant pump
Technical information for APA1 - replacing additional pump
Technical information for APA1 - replacing additional pump
Advanced technical information: E3.I/G2 V8 Oil/Air Separator Membrane Failure
Special tools information for the pneumatic cartridge gun.
Instructions on advanced technical information - coolant temperature is too high on the Panamera, Macan, and Cayenne.
Installation and conversion instructions for the front camera dashcam.
Instructions on advanced technical information for improper odometer and speedometer function
Special tools information for the logo templates and exchangeable inserts.
Special tools information for welding tools for the 911, 718, Macan, Panamera, Cayenne, Taycan.
Parts information for parts withdrawal involving the gateway
Technical information for WLD5 - replacing hose for positive crankcase ventilation.
Technical information for WLD4 - replacing hose for positive crankcase ventilation.
Technical information for WNA7 - switching off 3G network.
Special tools information for HV lift tools kit - for the Macan, Panamera, Cayenne, and Taycan
Instructions on special tools and equipment for drawer 19 foam insert release.
Instructions on special tools and equipment - locally available tool.
Advanced technical information for WMM7.
Information on WMM7 - replacing VTS control unit.
Technical information for WMM7 - replacing VTS control unit.
Installation and conversion instructions for the front camera on the Panamera.
Technical information for WMJ6 - re-programing and/or coding seat control unit.
Information on reverse camera - misted up and/or droplets forming in camera lens.
Read full bulletin
Rework rea lid release.
Technical information on WMM7 - replacing VTS control unit.
Special tools information for logo templates and exchangeable inserts.
Special tools information for an adapter - torque wrench
Special tools information for a new pinout box.
Special tools information for a new contact surface cleaning set.
Installation and conversion instructions for retrofitting the sports tailpipe
Installation and conversion instructions for retrofitting a bicycle rack on a variety of vehicles.
Installation and conversion instructions for retrofitting a front Dashcam on the Panamera.
Information on new special tool requirements for all vehicles.
Special tools information for a 12V Power Supply for PT3G Oscilloscope.
Special tools information for new VAS 5908 Requirements.
Special tools information on new Redline Dual Purpose Diagnostic Leak Locator.
Information on new PIWIS Tester program for independent repair facilities.
1997 to Present - Vehicle Analysis Log Types - In an effort to prode accurate information regarding the state of the...
Read full bulletin
vehicle at the time fof VAL creation, a "log type" drop down menu was added at the end of the VAL creation menu.
The Approval and Support Management Program (ASM)
Parts withdrawal information for heat protection on the Panamera.
Special tools information for pinout tool box tools.
Installation and conversion instructions for retrofitting a dashcam on the 971 Panamera as of MY17.
Historical information on Porsche product evolution.
Instructions for replacing the hydraulic pump on the 970 Panamera.
Resubmitting at request of Mr.
Read full bulletin
Bernard Hardgrave. Instructions on how to check the cable routing in the front center console area and rework it if necessary in the event that the speedometer needle in the instrument cluster is shaking.
Parts withdrawal information for a Panamera Damper.
Parts withdrawal information for assorted control units.
New parts promotion for all weather mats and cargo liner.
Special tools information on Logo Templates and exchangeable inserts.
Special tools information about an injector tool for the Panamera.
Special tools information on Logo templates and exchangeable inserts.
Special tools information on renting logo templates.
Instructions for replacing hydraulic mounts in the event that there are creaking or squeaking noises when driving on...
Read full bulletin
uneven surfaces.
Installation and conversion instructions for retrofitting the sport design package on the 971 Panamera.
Advanced Technical information on a NVH Lubrication kit.
Special Tools information on a support tool for the Panamera.
Special Tools information on tool #9891/2 supersedes from #9891.
Special Tools information for a High Performance Axial Fan.
Parts withdrawal information for a control unit on the Panamera.
Information on replacing the control unit for the auxiliary alarm system in the event of fault codes.
Information on new special tool - VAS 1978/35 Connector Release Tools.
Information on new special tool - Pinout/Diag Tool Box w/ Foam
Advanced technical information on Requested Filter Element Replacement in Connection with DMTL Replacement
Information on a parts withdrawal for a side member of the 971 Panamera.
Information on new special tool T90005 Adapter for Removing Injectors.
Information on a new pressure loss tester for all new models.
Instruction on how to access and inspect a possible grease leak on the Cardan Shaft Joint.
Information on Parts withdrawal of outdated instrument clusters.
Recommendations on how to store any Porsche vehicle since 2009.
Document showing the evolution of Porsche Vehicles since 1948.
Installation and Conversion instructions for installing a Cool Bag on several models.
Information on a new recommended smoke machine.
Information on new VCI cables available for purchase by dealers.
Instructions for clearing adaptive cruise control faults and warnings.
Instructions for reworking the seat cover in the event that dark spots begin to appear as a result of using seat...
Read full bulletin
ventilation.
Parts Withdrawal information for Panamera and Cayenne antennas.
Instructions for retrofitting the loadspace management system on the Panamera.
Bulletin outlining new blitz table replacement castors due to a high rate of failure reported by dealers.
Instructions for addressing leather seat wrinkling on older models.
Technical Bulletin for retrofitting rear seat entertainment on Panamera vehicles.
Parts withdrawal bulletin for various outdated control units on a variety of vehicles.
List of valid Advanced Technical Information bulletins (ATIs) as of 11/22/2019
Parts withdrawal bulletin for a bracket on the 971 Panamera
Announcement of new Tech Live look, which will put technicians into live chats with technical support if they should...
Read full bulletin
have an urgent issue
Information on new special tools for the Panamera (971) which will auto ship to dealers upon release.
Withdrawal of Part Number 971858331B 1E0 as it has been superceded by Part Number 971857335C 1E0.
The rear lid does not close normally.
971 Replacement keys disallow KESSY function
G2 Panamera and E3 Cayenne Coaxial cable ordering concept
Information: New data records for the DME control unit and the PDK control unit are available for the affected vehicles.
Read full bulletin
The new data records will enhance vehicle drivability and switching comfort of the vehicles.
Replacement Keys Disallow KESSY Function
Subject: Control unit for rear-end electronics Symptom: The alarm system is triggered spontaneously (for no apparent reason).
Read full bulletin
Cause: The mobile phone antenna (GSM) signals can be picked up by the interior surveillance system and result in spontaneous triggering of the alarm system.
Concerns: Belt tensioner Information: Checking belt tensioner in the event of a complaint about "leaks" before carrying...
Read full bulletin
out any other work.
Subject: Control unit for rear-end electronics Symptom: The alarm system is triggered spontaneously (for no apparent reason).
Read full bulletin
Cause: The mobile phone antenna (GSM) signals can be picked up by the interior surveillance system and result in spontaneous triggering of the alarm system.
Concerns: Belt tensioner Information: Checking belt tensioner in the event of a complaint about "leaks" before carrying...
Read full bulletin
out any other work.
Information: The Approval and Support Management system was created to offer assistance to the dealer organization with...
Read full bulletin
new and complex technical issues by utilizing the Support Specialists within Porsche R&D. As a result, this process has reduced vehicle downtime and repeat repairs substantially.
This Technical Information is intended as a supplement to the existing information in the event of complaints about...
Read full bulletin
data processing or data transfer between the Porsche Diagnostic Key and reader. The list provided here is sorted according to possible faults and is not a complete list. The Porsche Diagnostic Key functions are used for the first time with the Porsche Panamera (971). Remote vehicle key/hand-held transmitters from other Porsche models or earlier model years cannot be read out.
Subject: Plug socket (230 V/100 V/110 V) Symptom: AC plug socket (230 V/100 V/110 V) does not work.
Read full bulletin
Cause: The bit for "Plug socket switch-off" may be set unnecessarily in the gateway control unit.
Technical Concern: The technician confirms the customer's observation and also notes fault code P305400 stored in the...
Read full bulletin
DME.
Subject: Front air bellows Symptom: After the vehicle has been parked for a long time at temperatures below 5 F (-15...
Read full bulletin
C), the chassis can be lowered fully at the front axle.
Symptom: The rear lid cannot be locked.
Read full bulletin
The rear lid soft closing function does not work. Cause: The rear-lid lock activation time of 400 ms is too short. Remedial Action: The rear-lid lock activation time will be increased to 1,000 ms.
Engine
136 bulletinsManufacturer's Certificate for Overview of Approved Porsche C40 Engine Oils.
Read full bulletin
Note that this bulletin covers all models back to model year 1984, for which C40 engine oils are allocated.
Manufacturer's Certificate for Overview of Approved Porsche C20 Engine Oils.
Read full bulletin
Note that the bulletin covers all models back to model year 1984, for which C20 engine oils are allocated.
Manufacturer's Certificate for Overview of Approved Porsche C30 Engine Oils.
Read full bulletin
Note that the bulletin includes all models back to model year 1984, for which C30 engine oils are allocated.
Manufacturer's Certificate for Overview of Approved Porsche A40 Engine Oils.
Read full bulletin
Note that this bulletin covers all vehicles from model year 1997 to 2020, for which A40 engine oils are assigned. Model years 1997-2001 are not available for selection in the system.
Shrill Humming/Clacking Noise from the Engine Compartment: Check Mounting/Fastening of the ATF Cooler and/or ATF Lines...
Read full bulletin
(SY 51/26)
Allocation of Approved Engine Oils MY 2027 (13/26)
Overview of Approved Porsche C20 Engine Oils (20/26)
Overview of Approved Porsche C30 Engine Oils (19/26)
Overview of Approved Porsche C40 Engine Oils (21/26)
Overview of Approved Porsche A40 Engine Oils (15/26)
Overview of Approved Porsche C30 Engine Oils (16/26)
Overview of Approved Porsche C30 Engine Oils (16/26)
Overview of Approved Porsche C20 Engine Oils (17/26)
Overview of Approved Porsche C40 Engine Oils (18/26)
Parts information for parts withdrawal involving servomotor and rear light.
Read full bulletin
Part numbers affected are 976411881E, 976511881E, PAD411881B, PAD511881A, PAD411881C, 973945093BC. The vehicles involved are ones that use the part numbers mentioned.
Manufacturers certificate for an overview of approved engine oils (C30).
Read full bulletin
The vehicles involved are ones that use the engine oil mentioned. MY2004-2020
Manufacturers certificate for an overview of approved engine oils (C20).
Read full bulletin
The vehicles involved are ones that use the engine oil mentioned. MY2017-2020
Manufacturers certificate for an overview of approved engine oils (C40).
Read full bulletin
The vehicles involved are ones that use the engine oil mentioned. MY2012-2020
Manufacturers certificate for an overview of approved engine oils (A40).
Read full bulletin
The vehicles involved are ones that use the engine oil mentioned. MY1997-2020
Parts information for parts withdrawal involving the engine mounting.
Read full bulletin
Part numbers PAB199371A, PAB199372A, PAB199371C, PAB199372C are affected. The cars that use the part number(s) mentioned should be included.
Parts information for parts withdrawal involving the Window regulator motor.
Read full bulletin
The part numbers affected are PAB959801 and PAB959802. The vehicles involved are ones that use the part numbers mentioned.
Technical information for Oil Leak Around the Oil-Filter Housing: Observe Work Procedure
Technical information for Malfunction Indicator Light Active/Fault Memory Entry regarding Tank Shut-Off Valve Tank...
Read full bulletin
Ventilation System P242100 or P242200 in DME Control Unit
Manufacturers certificate for an Overview of Approved Porsche A40 Engine Oils.
Read full bulletin
MY1997-2020 affected.
Manufacturers certificate for an Overview of Approved Porsche C30 Engine Oils.
Read full bulletin
MY2004-2020 affected.
Manufacturers certificate for an Overview of Approved Porsche C40 Engine Oils.
Read full bulletin
MY12-20 affected.
Manufacturers certificate for an Overview of Approved Porsche C20 Engine Oils.
Read full bulletin
MY17-20 affected.
Parts information for parts withdrawal involving Solenoid Valve for Coolant Circuit.
Read full bulletin
the vehicles affected are cars that use part numbers 9J1963375N, 9J1963375P, 9J1963375Q, 9J1963375R, 9J1906459C
Parts information for parts withdrawal involving the wiring set for engine and wire set.
Read full bulletin
The vehicles affected are cars that use the part numbers in the PDF.
Manufacturers certificate for allocation of approved engine oils from MY20
Technical information for a Complaint - Oil leaks on double clutch transmission (Porsche Doppelkupplung (PDK)): Observe...
Read full bulletin
specified procedure (163/20)
Manufacturers certificate for an overview of approved Porsche C30 engine oils.
Read full bulletin
Model year 2004-2020 vehicles affected.
Manufacturers certificate for overview of approved Porsche A40 engine oils.
Read full bulletin
The vehicles affected are cars that use A40 engine oils. MY1997-2020
Manufacturers certificate for overview of approved Porsche C40 engine oils.
Read full bulletin
The vehicles affected are cars that use C40 engine oils. MY12-20
Manufacturers certificate for overview of approved Porsche C20 engine oils.
Read full bulletin
The vehicles affected are cars that use C20 engine oils. MY17-20
Technical information for a Complaint - Cylinder Head Cover Near the Injector Holes Leaking: Subsequent Work on Cylinder...
Read full bulletin
Head (Panamera models)
Manufacturers certificate for an Overview of Approved Porsche C40 Engine Oils.
Read full bulletin
The vehicles affected are cars that use engine C20 oil as of MY 2021.
Manufacturers certificate for an Overview of Approved Porsche C20 Engine Oils.
Read full bulletin
The vehicles affected are cars that use engine C20 oil as of MY 2021.
Parts information for parts withdrawal involving the piston - 0PB107066J and 0PB107066K.
Read full bulletin
The cars affected are ones that use the two part numbers mentioned.
Manufacturer's Certificate - Overview of Approved Porsche C40 Engine Oils (06/25)
Manufacturer's Certificate - Overview of Approved Porsche C30 Engine Oils (05/25)
Manufacturer's Certificate - Overview of Approved Porsche C20 Engine Oils (04/25)
Technical Information - Warning Message Coolant Temperature Too High: Checking Coolant Pump and Change - Over Valve...
Read full bulletin
(173/21)
Manufacturers certificate with an overview on approved Porsche A40 engine oils.
Read full bulletin
See attached for list of affected vehicles.
Manufacturers certificate with an overview on approved Porsche C40 engine oils.
Read full bulletin
See attached for list of affected vehicles.
Manufacturers certificate with an overview on approved Porsche C30 engine oils.
Read full bulletin
See attached for list of affected vehicles. All MY04-20
Manufacturers certificate with an overview on approved Porsche C20 engine oils.
Read full bulletin
See attached for list of affected vehicles.
Parts information for parts withdrawal involving the engine oil (00004321093)
Technical information for a complaint - engine faults (knocking/tapping combustion) under loads
Instructions on advanced technical information for a display of "coolant temperature too high" in group V6 and V8...
Read full bulletin
engines
Symptom based workshop manual for a noise symptom - rattling noises from engine compartment.
Read full bulletin
Checking balance shaft bracing wheel and replacing if necessary - G2
Manufacturers certificate - allocation of approved engine oils up until MY2020
Technical information for a warning message - "coolant temperature too high" checking coolant pump and change over valve
Technical information for a complaint - oil leaks on double clutch transmission
Technical information for Oil Leakage on Cylinder Head Cover: Insert Micro-Self-Locking Screw
Technical information for a message "engine control fault" in the instrument cluster
Instructions on manufactures certificate for approved Porsche A40 engine oils
Instructions on manufactures certificate for approved Porsche C30 engine oils
Instructions on manufacturers certificate for approved C20 engine oils
Technical information for a message "engine control fault" in the instrument cluster for the Panameras
Manufacturers certificate for an overview of approved Porsche A40 engine oils.
Manufacturers certificate for an overview of approved Porsche C40 engine oils.
Manufacturers certificate for an overview of approved Porsche C30 engine oils.
Manufacturers certificate for an overview of approved Porsche C20 engine oils.
Manufacturers certificate for allocation of approved engine oils
Instructions on advanced technical information for the engine - will not start for updating PVTS CU software via dealer...
Read full bulletin
web portal
Instructions on advanced technical information for the display of "coolant temperature too high" in Group V6 and V8...
Read full bulletin
Engines
Manufacturers certificate for approved engine C20 engine oils.
Technical information for the cylinder head cover near the injector holes leaking - subsequent work on cylinder head.
Overview of approved engine A40 oils for all Porsche models that use A40 oil.
Overview of approved engine C40 oils for all Porsche models that use C40 oil.
Overview of approved engine C30 oils for all Porsche models that use C30 oil.
Technical information for a Warning Message "Coolant Temperature Too High": Checking Coolant Pump and Change-Over Valve
Technical information for an oil leak around the oil-filter housing
Overview of approved engine C20 engine oils for all Porsche models using this oil.
Overview of approved engine C40 engine oils for all Porsche models using this oil.
Instructions on the manufacturers certificate for approve Porsche A40 engine oils.
Overview of approved engine C30 oils for Porsche models using C30 oils.
Instructions on the manufacturers certificate for allocation of approved engine oils up until MY2020.
Read full bulletin
(starting back at MY1984). An overview of the approved engine oils.
Technical information for a warning message "coolant temperature too high" - checking coolant pump and change-over...
Read full bulletin
valve.
Information for oil leak on cylinder head cover: insert microencapsulated self-locking screw.
Special tools for new Cayenne and Panamera engine tools.
List of approved C20 engine oils for all Porsche models using C20 oil.
List of approved engine C30 engine oils for all Porsche vehicles using C30 oil.
List of approved engine oils for all Porsche models using C40 oil.
Advanced technical information for updating the PVTS CU Software in the event that the engine will not start.
Advanced technical information on Updating PVTS CU Software in the event that the Engine will not start.
Information on checking ground points in the event that a "reduced engine power" message appears in the instrument...
Read full bulletin
cluster.
List of approved engine oils for new and classic Porsche models.
Information on how to remedy oil leaks on the double clutch PDK transmission.
Warranty information on timing chain cover repairs.
List of approved C20 style engine oils for classic and new Porsche models since 1984.
List of approved A40 style engine oils for new and classic Porsche vehicles MY 1984 and newer.
List of approved C40 engine oils for new and classic Porsche vehicles MY 1984 and newer.
List of approved C30 engine oils for all new and Classic Porsche vehicles MY1984 and newer.
List of approved C20 engine oils for all new and classic Porsche models 1984 and newer.
Instructions on how to repair the cylinder head on affected vehicles in the even that the cylinder head cover is...
Read full bulletin
leaking.
Instructions on how to repair the cylinder head in the event of the cylinder head cover leaking.
Advanced Technical information for replacing the active charcoal container in connection with Tank vent valve...
Read full bulletin
replacement.
List of approved A40 style engine oils for new and classic Porsche models.
List of approved C40 style engine oils for new and classic Porsche vehicles.
Parts withdrawal information for an Engine support for the Panamera.
Warranty information for Timing Chain cover repairs.
Instructions on how to replace both engine supports in the event that the supports are broken.
List of approved engine oils for all Porsche models since 2003.
Overview of Approved Porsche C20 Engine Oils
Updated warranty and repair information concerning timing chain cover repairs due to any failure of the chain.
List of approved A40 engine oils for all applicable vehicles as of 1984.
List of approved C40 engine oils for all Porsche models since 1984.
List of approved engine oils for all Porsche models.
Instructions for clearing the fault in the DME for "engine control fault" immediately after starting the vehicle.
Advanced technical bulletin for diagnosing and correcting a Check Engine light in the Panamera PHEV due to "Control Unit...
Read full bulletin
internal fault".
Instructions for fixing a rattling noise from the engine on 2017 through 19 Panameras.
Read full bulletin
The remedy is to check the bracing wheel on the balance shaft and replace if necessary.
List of approved C30 engine oils for all Porsche vehicles since 1984.
List of approved C20 engine oils for all Porsche vehicles since 1984.
List of approved A40 engine oils for all Porsche vehicles since 1984.
Instructions for addressing annoying rattling noises from the engine compartment at low speeds.
Additional information for repairing leaking cylinder head covers near the injector holes.
Repair instructions for Timing chain repair.
Read full bulletin
If an oil leak is identified from the timing chain cover and it has been found that any part on the timing cover has failed, then the engine must be removed and the entire timing chain cover resealed per the WM instructions.
Parts withdrawal for the engine support on the Panamera.
List of approved A40 engine oils for Porsche vehicles.
Information about possible engine knocking and how to clean carbon deposits is they are dirty and causing knocking.
There is cast residue in the cylinder head cover sealing groove, causing the injector holes to leak.
Complaint - Engine Support Broken: Replacing Both Engine Supports
Oil Leakage from Cylinder Head of 3.0 and 2.9-Liter V6 Engines
Symptom: Customers complain that it is difficult to refuel their vehicle and the refuelling process keeps stopping and starting.
Read full bulletin
Cause: Problems can occur during refuelling because a control valve (in the fuel tank) is not engaged completely. Remedial Action: In the event of a customer complaint, replace the fuel tank, see ? Workshop Manual '201019 Removing and installing fuel tank (Hybrid)'.
Subject: Connecting-rod bearing Situation: At high engine speeds and with the high lateral acceleration forces that...
Read full bulletin
occur when driving on race tracks, the oil pressure can drop if the engine-oil level is low. In this case, the connecting rod bearings in the engine can be damaged due to insufficient lubrication.
Oil in the wiring harness.
Read full bulletin
If oil is found in the engine wiring harness during a repair, the wiring harness and all the affected components (including the oil pump control valve) must be replaced.
Oil in the wiring harness.
Read full bulletin
If oil is found in the engine wiring harness during a repair, the wiring harness and all the affected components (including the oil pump control valve) must be replaced.
There is a possibility that the pressure hose between the charge-air cooler and throttle valve for cylinders 4?6 is...
Read full bulletin
rubbing against the cooling fan housing on the affected vehicles. This can cause a leak in the pressure hose at the chafing point over the service life of the vehicle. This will result in reduced engine power and the Check Engine light will be activated.
Subject: Intake valves and intake ports Information: Carboned-up valves in the engine can be reworked and cleaned using cleaning equipment.
Read full bulletin
If there is a complaint about knocking combustion, e.g. during acceleration at high load, the condition of the intake valves and portsmust be checked before doing any other work. If the check shows that the intake valves and intake ports have carbon deposits and are dirty, they must be cleaned using the VAS 294 011 - cleaning unit. There should be no need to replace the components. Date of Introduction: The VAS 294 011 - cleaning unit can be ordered immediately for dealers. Remedial Action: The VAS 294 011 - cleaning unit is used for cleaning carboned-up intake valves and intake ports. Compressed air is used to spray a special granulatemixture into the intake port,where it loosens and removes carbon build-up. The dirty granulate is extracted during spraying using an industrial vacuum cleaner.
Concern: Abrupt, ?Harsh? Gear Shift Changes, particularly in first and second gears Information: Rough gear changes...
Read full bulletin
with unmatched engine and transmission revs can be attributed to an unadapted PDK. Transmission performance issues characterized by unmatched, abrupt shifts, particularly in first and second gears may require a driving adaption. Prior to the adaption drive, update PDK Software using the latest PT3G Version and perform a calibration. Successful calibration of the PDK is a prerequisite for the adaption drive.
Subject: Fastening screw for engine ground cable on front right longitudinalmember Concern: There is a possibility that...
Read full bulletin
the fastening screw for the engine ground cable on the front right longitudinalmember may not have been tightened sufficiently.
Subject: Control unit for Porsche Active SuspensionManagement (PASM) Information: On vehicles with air suspension, the...
Read full bulletin
vehicle level can be lowered after the vehicle has been idle for a long time. At temperatures below 5 F (-15 C), this can result in the front axle being lowered to the low level.
Concern: Abrupt, ?Harsh? Gear Shift Changes, particularly in first and second gears Information: Rough gear changes...
Read full bulletin
with unmatched engine and transmission revs can be attributed to an unadapted PDK.
Subject: Wire harness for PASMvalve unit Information: The wire harness for the PASM valve unit is not routed correctly...
Read full bulletin
in the area around the heat protection panels for the valve unit on the affected vehicles. Due to relative movements while driving and if significant amounts of dirt get in, this can cause chafing on the wire harness and as a result, faults can be entered in the fault memory and the warning "Chassis system fault" may be displayed in the instrument cluster. As a result, the vehicle level can no longer be set.
Software & Calibration
123 bulletinsPorsche Tester Software Update Information Software Version: 44.300.000
PiUS Update Information Software Version: 3.2
PiUS Update Information Software Version: 3.2
Porsche Tester Software Update Information Software Version: 44.200.051
Porsche Tester Software Update Information Software Version: 44.200.041
Porsche Tester Software Update Information Software Version: 44.200.040
Porsche Tester Software Update Information Software Version: 44.200.035
Porsche Tester Software Update Information Software Version: 44.200.031
Porsche Tester Software Update Information Software Version: 44.200.030
Porsche Tester Software Update Information Software Version: 44.200.023
Porsche Tester Software Update Information Software Version: 44.200.022
Porsche Tester Software Update Information Software Version: 44.200.022
Porsche Tester Software Update Information Software Version: 44.200.015
Porsche Tester Software Update Information Software Version: 44.200.010
Porsche Tester Software Update Information Software Version: 44.200.010
Porsche Tester Software Update Information Software Version: 44.200.001
Special tools and equipment information for VAS 6296/10 Auto-Ship and Q1 2026 Software Spec Update Available
Technical information for a software update of various control units: Software Network VR28.13 SQ4
Special tools and equipment information on VAS 6292 Spec Update 2025.0.4 (VAS 6292/9 & VAS 6292/10 Required)
Parts information for parts withdrawal involving the combi-instrument black.
Read full bulletin
The part numbers listed on the PDF and All parts with software version 005 are affected. Only software version 006 is OK.
Technical information on WSJ0 Update to Software Network VR28.13 (Workshop Campaign)
Special tools and equipment information on VAS 6292 Spec Update 2025.0.3 (VAS 6292/9 & VAS 6292/10 Required)
Special tools and equipment information for VAS 6292 Spec Update 2025.0.2 (VAS 6292/9 & VAS 6292/10 Required).
Read full bulletin
All vehicles affected.
Special tools and equipment information for VAS 6292 Spec Update 2025.0.1.
Read full bulletin
All models
Information on PIWIS tester update 43.300.015
Porsche intranet posting with information on WRE7 - Workshop Campaign - reprogramming Porsche rear seat entertainment...
Read full bulletin
system
Technical information for reprogramming Porsche rear seat entertainment
Special tools and equipment information for AVL HV Tool calibration and certification service
Information on PIWIS tester update 43.000.020 & .021.
Read full bulletin
PIWIS tester updates applies to all Porsche models that have an OBD2 port.
Information on PIWIS tester update 43.000.017.
Read full bulletin
PIWIS tester updates applies to all Porsche models that have an OBD2 port.
Information on PIWIS tester update 43.000.016.
Read full bulletin
PIWIS tester updates applies to all Porsche models with an OBD2 port.
Information on PIWIS tester update 43.000.010, .011 & .015.
Read full bulletin
PIWIS tester updates applies to all Porsche models with an OBD2 port.
Information on PIWIS tester update 42.950.048
Information on PIWIS tester update 42.950.040.
Read full bulletin
PIWIS tester updates applies to all Porsche models that have an OBD2 port.
Information on PIWIS tester update 42.950.032.
Read full bulletin
PIWIS tester updates applies to all Porsche models that have an OBD2 port.
Information on PIWIS tester update 42.950.030.
Read full bulletin
PIWIS tester updates applies to all Porsche models that have an OBD2 port.
Information on PIWIS tester update 42.950.025
Information on PIWIS tester update 42.950.021
Information on PIWIS tester update 42.950.020
Information on PIWIS tester update 42.950.015
Information on PIWIS tester update 42.950.010 & .011
Information on PIWIS tester update 42.950.000 & .001
Information on PIWIS tester update 42.900.030
Information on PIWIS tester update 42.900.020
Information on PIWIS tester update 42.900.010
Information on PIWIS tester update 42.900.000
Information on PIWIS tester update 42.800.070 & .072
Information on PIWIS tester update 42.800.060
Information on PIWIS tester update 42.800.052 & .055
Information on PIWIS tester update 42.800.050
Information on PIWIS tester update 42.800.040
Information on PIWIS tester update 42.800.030
Information on PIWIS tester update 42.800.000 42.800.020
Information on PIWIS tester update 42.700.050
Information on PIWIS tester update 42.700.040
Information on PIWIS tester update 42.700.033 & .035
Information on PIWIS tester update 42.700.030 & .032
Information for PIWIS tester update 42.300.050 & .052
Information for PIWIS tester update 42.300.040 & .041
Information for PIWIS tester update 42.300.035
Information for PIWIS tester update 42.300.030 - .032
Special tools and equipment information on PIWIS tester update 42.250.050
Information on PIWIS tester update 42.250.045
Information on PIWIS tester update 42.250.042
Information PIWIS tester update 42.250.040
Information on PIWIS tester update 42.250.032
Information on PIWIS tester update 42.250.030
Information on PIWIS tester update 42.200.025
Information on PIWIS tester update 42.200.020 & .022
Information for PIWIS tester update 42.100.000, .010 & .011
Information for PIWIS tester updates 42.000.050 & .051
Information for PIWIS tester update 42.000.048
Information for PIWIS tester update 42.000.040
Information for PIWIS tester update 42.000.035
Information for PIWIS tester update 41.750.045 & .046
Information on technical information for a complaint involving the Panamera.
Read full bulletin
The SD map update/OTA map update does not function
Information for PIWIS tester update 41.500.020 & .022
Information for PIWIS tester update 41.400.000 & .010.
Information for PIWIS tester update #41.375.050
Information for PIWIS tester update #41.375.045.
Information for PIWIS tester update #41.375.040
Information for PIWIS tester update #41.300.000, .010 & .012
Porsche intranet posting with information on Workshop Campaign WMJ6 - reprograming and-or coding seat control unit
Special tools information regarding the surround view calibration mats.
Special tools information for coolant cart foam update.
Information on new PIWIS Tester update #40.300.020.
Information on PIWIS tester update #40.300.000 & .010.
Information on new PIWIS Tester update #40.250.040
Information on Porsche PIWIS Tester update #40.250.030 & .035.
Information on Porsche PIWIS Tester III Online Update 40.200.020.
Information on Porsche PIWIS Tester III Online Update 40.200.000, .010, .015 & .016.
Information on PIWIS Tester update 40.000.020 & .022.
Porsche Specials tools update for an offline SD Card update for the Map services.
Information on PIWIS Tester III Online Update 39.700.030
Information on PIWIS Tester III Online Update 39.700.020
Information on PIWIS Tester III Online Update 39.700.000, .010 & .012
Porsche intranet communication for Porsche Workshop Campaign WKH7 - Reprogramming DME control unit.
Information on new PIWIS tester update 39.500.020 and .025.
Instructions on how to perform a PVTS Software update in the event that a car will not start.
Instructions for how to perform a software update on the Control unit for the auxiliary alarm system in the event that...
Read full bulletin
the vehicle will not start.
Bulletin outlining new PIWIS tester update 39.100.030 & .035
Bulletin outlining PIWIS tester update 39.200.000, .010, .015, .016, & .017
Technical information concerning complaints that the interior surveillance system is deactivated in affected vehicles.
Read full bulletin
The remedy is to reprogram the Rear-end Electronics Control Unit.
Updated worksheet for Chassis and VIN numbering system.
Read full bulletin
Updated to include 2020 Models including the Taycan.
Updated bulletin with the full list of Porsche model type designations.
Information about new PIWIS Tester update 39.050.010
Information about new PIWIS Tester update 39.050.012
Information about new PIWIS Tester updates 39.000.022 and 39.050.000
Information about PIWIS Tester update 39.000.020
New PIWIS Tester update 38.800.030
New PIWIS Tester update 38.800.020
New PIWIS tester updates 38.800.000 &.010
Porsche intranet posting for campaign WKC7, which seeks to reprogram the DME control unit on affected vehicles.
Porsche intranet posting for WJ06 campaign, which seeks to reprogram the gateway control unit on affected vehicles.
Porsche intranet posting for WJ82 Campaign, which seeks to reprogram the gateway control unit on affected vehicles.
Porsche Intranet post for WJ67 campaign, which seeks to reprogram the DME control unit on affected vehicles.
Bulletin outlining PIWIS Tester updates 38.600.030 & 035.
Bulletin outlining PIWIS Tester updates 38.600.020.
Bulletin outlining PIWIS Tester updates 38.600.000, .010, & .015.
Subject: Instrument cluster Information: Due to a process error, the control number SP7 for the software variant of the...
Read full bulletin
PDK control unit was not stored in the vehicle order on the affected vehicles.
Cause The control unit for the auxiliary alarm system has limited bus communication.
Read full bulletin
Date of Introduction Control units for the auxiliary alarm system with updated software have been used in production since the beginning of December 2017.
There are two potential issues related to PASM Control units in the Panamera (971) for which an updated part has been released.
Read full bulletin
One may be experienced by the customer and the other by the workshop. 1. If programming is interrupted while performing the WH29 service action, the control unit may become unresponsive and cannot be communicated with or reprogrammed.
Concern: Incorrect Model Year (MY) coding in Gateway prevents programming Information: During software updates, it is...
Read full bulletin
possible for the Gateway to store an incorrect MY. If this happens, the vehicle will function as normal until the next attempt at Coding/Programming.
Electrical
71 bulletinsParts information for parts withdrawal involving 9J1827447B, PAA971221B, and 95B201060AA.
Read full bulletin
The lock, the fuel tank attachments, and the module connector. The vehicles affected are ones that use the part number(s) mentioned.
Parts information for parts withdrawal involving the (976809858) Fuel filler flap module.
Read full bulletin
The vehicles affected are ones that use the part number mentioned.
Parts information for parts withdrawal involving the high-voltage battery.
Read full bulletin
The vehicles affected are ones that use the part numbers mentioned. 9J1915099AS, 9J1915100AS, and 9J1915100AQ
Parts information for Parts Withdrawal - Pressure Sensor (9A790605201) The cars affected are ones that use the part...
Read full bulletin
number mentioned.
Parts information for parts withdrawal involving various parts - battery module and high voltage battery.
Read full bulletin
The vehicles affected are ones that use the part numbers in the attached PDF
Parts information for Parts Withdrawal - Repair Set for Seat Occupied Sensor.
Read full bulletin
Part numbers 9J1881256AJ, 9J1881256AK, 9J1881256AL, 9J1881256AM, 9J1881256AN are affected. The cars involved are ones that use the part numbers mentioned.
Parts information for parts withdrawal for Repair Set for Seat Occupied Sensor.
Read full bulletin
Parts involved are 95C881256F and 95C881256H. The cars affected are ones that use the part numbers mentioned
Technical information for Important Information for Maintaining, Diagnosing and Checking the (AGM) Battery
Parts information for parts withdrawal involving a various number of parts all listed in the attached PDF.
Read full bulletin
Hose, air conditioning, door warning light, control line with differential pressure sensor
Instructions on advanced technical information for paint thickness or decals affecting corner radar sensor operation.
Read full bulletin
Affects all model lines
Parts information for parts withdrawal involving the pressure sensor.
Read full bulletin
The vehicles affected are cars that use the part number 9A790605201
Parts information for parts withdrawal involving the high voltage connector.
Read full bulletin
The affected vehicles are ones that use part number PAC915161(High-voltage connector)
Parts information for parts withdrawal involving the high voltage battery.
Read full bulletin
The affected vehicles are ones that use part number 0Z3915913BN (High-voltage Battery)
Parts information for parts withdrawal involving the high voltage battery.
Read full bulletin
The affected vehicles are ones that use part number 0Z3915913BN (High-voltage Battery)
Parts information for parts withdrawal involving the high voltage battery - 0Z3915913BN.
Read full bulletin
Vehicles affected are cars that use the part number mentioned
Parts information for parts withdrawal involving the control unit for battery monitoring.
Read full bulletin
Part numbers related are PAC915234, PAC915234A, PAC915234B, PAC915234C, PAC915234D. The vehicles affected are cars that use the part number mentioned
Parts information for parts withdrawal involving the high voltage battery - 9J1915590M and 9J1915589M.
Read full bulletin
The vehicles are not listed, but the affected cars are ones that use the part numbers mentioned.
Parts information for parts withdrawal involving the high-voltage connector (PAC915161).
Read full bulletin
Vehicles not listed but the cars affected are cars that use part number PAC915161
Technical information for WPD8 Re-Programming High-Voltage Battery Control Unit (BMC)
Porsche intranet posting with information on workshop campaign WPD8 - reprogramming high voltage battery control unit
Technical information for WPD8 Re-Programming High-Voltage Battery Control Unit
Parts information for parts withdrawal involving the charger for the high-voltage battery
Instructions on advanced technical information for the ignition lock error - B143C29
Porsche intranet posting with information for workshop campaign WNN6 - restoring PCM enabling function
Information for recommended HV battery - fire blanket on the Panamera, Cayenne, and Taycan
Technical information for WNN6 - restoring PCM enabling function on the 718, 911, Panamera, Macan, and Cayenne
Special tools information for a map service update for PCM4 and PCM5.
New Special tools information for a Schumacher 100 Amp Reprogrammer / Power Supply with Battery Support.
Information on offline MAP service updates for the PCM4 and PCM5.
Porsche intranet posting with preliminary information for Porsche workshop campaign WMD1 Workshop Campaign -PCM Software...
Read full bulletin
Update.
Instructions on how to fix an error in the PCM showing that Satellite and Google Earth Map are no longer available.
Porsche intranet posting with information on Workshop Campaign WMD1 - PCM Software Update.
Information on how to deal with a potential cyber security breach.
Porsche service campaign information for Workshop Campaign WMD1 - Performing PCM Software Update.
Instructions on a possible customer complaint that the Google Earth Satellite view is not working on the PCM 4.0.
Information on a Navigation system update for the PCM3.1
Advanced Technical information about the Panamera rear O2 sensor replacement.
Information on new special tool for offline updates of the PCM Versions 4 and 5.
Spare parts requirements for retrofitting the new Porsche PCM 4.1 system into the 2017 Panamera.
Information on new pressure sensor and a cooling system tester for HV batteries.
Workshop Campaign instructions for WS Campaign WLB7 - Replacing Oxygen Sensor Downstream of Catalytic Converter.
Instructions for manually setting the date and time on older model vehicles with GPS and PCM 2.1 or older.
Instructions for retrofitting Sport Plus Mode on vehciles without sport chrono package already installed.
Read full bulletin
This bulletin is specifically for the new Porsche PCM4 which was new for MY17.
Instructions on carrying out the WKC7 Workshop campaign, which is a re-programming of the DME control unit in order to...
Read full bulletin
optimize the control of the oxygen sensor downstream of the catalytic converter.
Instructions for carrying out Workshop Campaign WJ82, Re-coding Gateway Control Unit.
Read full bulletin
Due to a software error, the sport exhaust system can remain activated after switching the ignition on and off again although it is shown as inactive in the Vehicle menu. As a result, the GCU must be reprogrammed and driving modes must be restored.
Request for dealers to remove Special Tool VAS 6839 from High Voltage tool box because the unit could give erroneous voltage readings.
Read full bulletin
PAG has decided that VAS 6558A could be used in its place.
Technical Bulletin detailing new Special Tool, Flexray Vehicle Network Tester, which is now a required tool to...
Read full bulletin
communicate with the vehicles modules and the Porsche in-house tester known as the PIWIS Tester III.
Subject: Control unit for electric power steering Information: There is a possibility that the electric power steering...
Read full bulletin
may not be available for a limited period of time sporadically on the affected vehicles due to a software error. Greater force will then be required to turn the steering wheel. Power steering will be fully available again after switching the ignition off and on again.
Technical Background A manufacturing defect damages the key and causes the key battery to discharge prematurely.
Read full bulletin
This damage cannot be repaired.
Subject: Front camera Symptom: The customer complains that certain functions of the front camera are not available at...
Read full bulletin
times: Lane Change Assist not available Porsche Dynamic Light System not available Traffic sign recognition not available Cause: Image sensor fault in the front camera. Insufficient contrast causes certain functions to fail at times. Remedial Action: Check front camera and replace it if necessary.
Information: Side sections can crack when replacing the tank module or charging module
Subject: Control unit for Porsche Active Suspension Management (PASM) Information: Due to a software error, there is a...
Read full bulletin
possibility that communication between the PASM control unit and other control units will sometimes be aborted when the ignition is switched on in the affected vehicles.
Information: Side sections can crack when replacing the tankmodule or chargingmodule
Subject: Control unit for Porsche Active SuspensionManagement (PASM) Information: Due to a software error, there is a...
Read full bulletin
possibility that communication between the PASM control unit and other control units will sometimes be aborted when the ignition is switched on in the affected vehicles.
Subject: Control unit for high-voltage charger Information: Due to a software error, there is a possibility that the...
Read full bulletin
control unit for the high-voltage charger will not switch to energy-savingmode after the vehicle is stopped in the event of specific user behavior. This can result in an increased closed-circuit current load and can thus deplete the vehicle electrical system battery.
Customer Concern: The remote key battery is dead before its expected end of life.
Read full bulletin
Technical Concern: The technician confirms this behavior. Service Information: For vehicles built before 8/19/2017, the key itself is defective and the battery likely performs as expected. In this case, replace the key.
Change of supplier for the heat shields for the catalytic converter and oxygen sensors from "Thermamax" to "ISOLITE".
Read full bulletin
If a heat shield needs to be replaced, the existing type of heat shield must be determined before doing any other work. If the heat shield to be replaced is a "Thermamax" heat shield, the entire set (all related heat shields) must also be replaced.
Customer Concern: The customer may desire a PCM software update.
Read full bulletin
Perhaps the customer experiences an unwanted PCM behavior and errantly believes a PCM software update will help solve the perceived issue. Technical Concern: The calendar year 2017 software update for PCM4.1 is not compatible with MY17 Panamera (971) (which does have PCM4.1). In fact, this software update may make the PCM climate controls permanently inoperable.
Information: This document updates information previously published in EQ 1105, EQ 1105, and EQ 1401.
Read full bulletin
To provide stable voltage and sufficient current throughout certain service operations, you should connect the vehicle to a battery charger (sometimes referred to as a power supply). However, you may experience ECU programming and coding issues if the chosen battery charger has insufficient power. Many workshop manuals currently advise use of a battery charger with a 40 or 70 A current rating. However, with the increasing current requirements of modern Porsche vehicles, we recommend a battery charger capable of producing a minimum current of 90 A.
Subject: Gateway control unit Information: Due to a software error, the sports exhaust system can remain activated...
Read full bulletin
after switching the ignition off and on again although it is shown as inactive in the Vehicle menu. Remedial action: Re-code gateway control unit
Subject: Air-conditioning system function Situation: Customers complain that the air conditioning does not function at times or after starting it.
Read full bulletin
The air conditioning does not turn on or is turned off if the state of charge of the high-voltage battery is very low and also if the battery is not sufficiently charged while driving.
Information: The customer complains that certain functions of the front camera are not available at times: * Lane...
Read full bulletin
Change Assist not available * Porsche Dynamic Light System not available * Traffic sign recognition not available Cause: Image sensor fault in the front camera. Insufficient contrast causes certain functions to fail at times.
Subject: Discharge protection function of the batterymanagement system(BMS) in order to extend the service life of...
Read full bulletin
high-voltage and low-voltage batteries
Concerns: AGM starter battery (referred to below simply as 'battery') Situation: Support for the care andmaintenance of...
Read full bulletin
the AGMstarter battery (at the dealership): From the time the vehicle is delivered to the Porsche Centre until it is handed over to the customer, the battery must be maintained and charged regularly, depending on use.
Customer complaints concerning battery-related topics Recurring customer complaints concerning topics relating to...
Read full bulletin
battery capacity and quality.
Cause Incorrect wiring for rear lid release switch.
Read full bulletin
Date of introduction Modified wiring is used during production from November 7, 2016. Remedial action In the event of a customer complaint, rework rear lid release switch wiring using a cable adapter.
Concern: Vehicle stuck in Transport Mode at PDI, Fault U110500 - Transport mode active Present.
Read full bulletin
Information: If after performing a Handover and there are Active faults for Transport Mode, perform the following work around: ? Enter Diagnostics-> Gateway-> Coding Pr ogramming-> Customer Specific-> Transport Mode. ? Activate T ransport Mode. Disconnect the PIWIS Tester III (PT3G) from the vehicle and cycle the key. ? Connect the PT3G, go back to T ransport Mode, and Deactivate. ? Per form a Battery Reset and another Handover.
Cause: The wire harness for the TPM control unit can interfere with communication between the TPM control unit and the TPM sensors.
Read full bulletin
The wire harness for the TPM control unit is not routed correctly in the rear axle area. Remedial Action: The routing of the wire harness is changed using an extension of the existing harness wire.
Information: There is a possibility that when you switch on the ignition, the displays in the instrument cluster will...
Read full bulletin
not be activated on the affected vehicles. As a result, no information will be displayed in the instrument cluster. Remedial Action: Re-program the instrument cluster using the PIWIS Tester with software version 35.000.010 (or higher) installed.
Symptom: The proximity sensor in the door handle does not function even though the driver's key is in range.
Read full bulletin
? The vehicle cannot be locked using the proximity sensor in the door handle.
Information: An emergency release module, in which the material composition of the axial shaft for the emergency...
Read full bulletin
release actuator does not meet the required torsional rigidity, was installed in the driver's door on the affected vehicles. As a result, the vehicle cannot be opened using the emergency key. Remedial Action: Replace emergency release module in the driver's door.
Body & Paint
37 bulletinsParts information for parts withdrawal involving the door lock.
Read full bulletin
The part numbers involved are all included in the PDF. All parts before generation status S08 and before pro-duction date 01.09.2024. The vehicles affected are ones that use the part numbers mentioned.
Parts information for parts withdrawal involving the door lock.
Read full bulletin
The vehicles affected are ones that use the part number(s) mentioned in the attached PDF.
Parts information for parts withdrawal involving the door lock.
Read full bulletin
part numbers 9Y0839015, 9Y0839016, 9Y0839016A, 9Y0839015A, 9Y0839015B, 9Y0839016B. Vehicles affected are cars that use the part numbers mentioned.
Parts information for parts withdrawal involving the glass roof - 9J0877069BY & 9J0877069CY.
Read full bulletin
The vehicles affected are ones that use the part numbers mentioned.
Parts information for parts withdrawal for a roof console - part numbers 992501031H, 992501032H, 992501033AB, and 992501033AC.
Read full bulletin
The vehicles affected are cars that use any of the four part numbers mentioned.
Parts information for parts withdrawal involving the roof console.
Read full bulletin
95C959551AETM0, 95C959551ABTM0, 95C959551ACTM0, 95C959551ADTM0. The vehicles affected are cars that use the part number(s) mentioned.
Parts information for parts withdrawal involving the door lock.
Read full bulletin
The affected cars are cars that use part numbers 971839016B, 971839015D, 971839015B, 971839016D, 971839016C, 971839015C, 9Y0839015, 9Y0839016, 9Y0839016A, 9Y0839015A
Instructions on advanced technical information for all models - Updated Primer Substance and Application Guidelines For...
Read full bulletin
Glass Installation/ Windshield and Glass Roof
Parts information for parts withdrawal for the seal ring - 0PB115625A
Parts information for parts withdrawal involving the roof glass - 9J0877069EY and 9J0877069DY
Instructions on advanced technical information for damages to clearcoat from paint protection film application
Symptom-based workshop manual for a noise symptom - creaking noises from the body front area of the vehicle - replacing...
Read full bulletin
upper trailing arm
Parts information for parts withdrawal involving the glass roof - 9J0877069EY and 9J0877069DY
Symptom-based workshop manual for a noise symptom: creaking noise from body area of vehicle
Instructions on advanced technical information for the lubricant for the sunroof/sliding roof.
Symptom based workshop manual information - eliminating symptoms in body interior: Re-calibrating Surround View Camera Control Unit (for I-no.
Read full bulletin
8A4)
Technical information for front roof console that needs to be replaced.
Installation instructions for retrofitting a roof box on a variety of Porsche models.
Instructions for realigning the headliner in the Panamera in the event that it is sticking out in the door seal area.
Parts withdrawal information for roof consoles on Panamera vehicles.
Workshop campaign instructions for WS Campaign WLC9 - Re-programming Roof Console
Information about retrofitting model designation on doors.
Instructions for how to treat a leaking paroramic roof
Instructions for installing the Porsche Bicycle Rack on applicable models with an already installed roof transportation...
Read full bulletin
system
Instructions for installing the Porsche Roof Box on applicable models with an already installed roof transportation...
Read full bulletin
system
Troubleshooting information for customers experiencing issues with their Universal Garage Door Opener.
The closing aid for the front doors may not work at negative outside temperatures.
Outer seal on Panoramic roof is faulty, causing water to leak into vehicle.
Subject: Panoramic roof Symptom: Loud creaking noises can come from the panoramic roof area while driving.
Subject: Filler flap Information: There is a possibility that the required clearance of the filler flap with respect to...
Read full bulletin
the body side panel is not guaranteed under all conditions due to unfavorable tolerances.
Subject: Filler flap and charge port door Information: There is a possibility that the required clearance of the filler...
Read full bulletin
flap and charge port door with respect to the body side panel is not guaranteed under all conditions due to unfavorable tolerances.
Symptom: Exterior mirror can make squeaking noises when folding in and out.
Read full bulletin
Cause: The exterior mirror can squeak when folding in and out due to the sealing geometry of the joint gap seal between the mirror base and mirror housing. This can occur particularly at temperatures above 68 F (20 C).
Subject: Control unit for seat adjustment (driver seat) Symptom: The seat does not automatically move to the seat...
Read full bulletin
position that was previously stored in the seat memory when the "Comfort Entry" function is active. However, the stored seat position can be retrieved manually using the key-operated button in the door.
Symptom: The filler flap/charge port door is difficult to open or close.
Read full bulletin
Cause: The filler flap/charge port door may be difficult to actuate due to unfavorable component tolerances on the affected vehicles. Remedial Action: Replace the filler flap/charge port door and rework it if necessary (if there is a visible edge) before fitting.
Information: Seam sealer on the production line was manually applied in the early vehicles.
Read full bulletin
Symptom: As a result of seam sealer being applied manually, an imperfection could allow water to leak into the passenger compartment.
The below instructions take the place of "WM 645819 Removing and installing switch for power windows" until such time...
Read full bulletin
as the WM is modified to include these instructions. Overview of the clamping elements (metal clips) in installed position Overview: Unlocking
Information: An unfavorably positioned drain bore in the front right power windows mechanism can prevent moisture that...
Read full bulletin
penetrates via the window channel frombeing drained completely. If this moisture freezes at low outside temperatures, the mechanism can be damaged when the front right power window is actuated. As a result, the front right side window will no longer close. Remedial Action: Replace front right power windows mechanism.
Brakes
29 bulletinsParts information for parts withdrawal involving (992513031K) Shock absorber (spring cyl.).
Read full bulletin
The vehicles affected are ones that use the part number mentioned.
Parts information for parts withdrawal involving various parts.
Read full bulletin
The part numbers affected are 9GT501135B, PAD411881A, 992915099KY. The vehicles affected are ones that use the part numbers affected
Parts information for parts withdrawal involving the caliper without brake pads.
Read full bulletin
The part numbers affected are in the attached PDF. The vehicles associated are cars that use the part numbers in the PDF.
Parts information for parts withdrawal involving the brake disc 9Y0615301AJ
Parts information with parts withdrawal involving the stowage compartment for Mobile.
Read full bulletin
The vehicles affected are cars that use part number PAD035507
Parts information for Parts Withdrawal - 1 Set of Brake Pads for Disk Brake.
Read full bulletin
Vehicles included are all cars that use part number 992698451R
Parts information for parts withdrawal involving the primer - PAD181220.
Read full bulletin
Vehicles affected are cars that use part number PAD181220
Parts information for parts withdrawal involving the socket and throttle control element.
Read full bulletin
The vehicles affected are cars that use part numbers 9J1821941G, 9J1821942G, 9J1959774F, PAD959774
Parts information for parts withdrawal for information on the cardan shaft and shock absorber.
Read full bulletin
The vehicles affected are cars that use part numbers 958521101, 958521101A, 9J1413031G
Parts information for parts withdrawal for information on the cardan shaft and shock absorber.
Read full bulletin
The vehicles affected are cars that use part numbers 958521101, 958521101A, 9J1413031G
Parts information for parts withdrawal involving the camera and control unit with the camera - PAD980551 & PAD980568C.
Read full bulletin
The affected vehicles are cars that use the part numbers mentioned.
Parts information for parts withdrawal involving the brake hose 9J1611707F and 9J1611708F
Parts information for parts withdrawal involving the retainer for brake hose/brake line
Parts information for parts withdrawal involving the retainer for brake hose/pressure difference sender.
Read full bulletin
(9J1611845C, 9J1611846C, PAB906051C)
Technical information on a complaint - brake noise
Advanced technical information for a brake squeal.
Parts withdrawal information for a brake disc.
Information on a parts withdrawal for a brake disc.
Understanding and addressing brake squeal complaints.
Resubmitting at request of Mr.
Read full bulletin
Bernard Hardgrave. Advanced technical information on brake fluid for all Porsche vehicles.
Special tools bulletin for new brake fluid tester.
Porsche intranet posting for Campaign WJ83, which seeks to reprogram the control units for Porsche Stability Management...
Read full bulletin
and electric brake booster on the affected vehicles.
Instructions for carrying out Workshop Campaign WJ83, Re-programming Control Units for PSM and Brake Booster.
Read full bulletin
With the current combination of Porsche Stability Management and the Electric Brake Booster, the two control units may fluctuate the tactile feedback of the brake pedal at low speeds.
Information: If the brake shoes or disc brakes need to be replaced, calibration of the electric parking brake cannot be...
Read full bulletin
carried out due to a software error. In the event of a complaint, the electric parking brake control unit must be re-programmed.
Customer Concern The customer hears rattling noise from the front brakes.
Customer Concern The customer hears rattling noise from the front brakes.
Subject: Lower control arms on the front axle Information: Bearings for the lower control arms on the front axle with...
Read full bulletin
an unfavorablematerial pairing were fitted on the affected vehicles. This can result in rattling noises from around the front axle while braking and also driving on uneven road surfaces at temperatures below 50 F (10 C). Remedial Action: Replace lower control arms on the front axle.
Information: A Cayenne with optional equipment no.
Read full bulletin
1D6 will come with a Trailer hitch receiver and wiring up to the receiver hitch that includes a control unit to operate the trailer parking lights, turn signals and brake lights. The Cayenne is also pre-wired for a brake controller. You will need to do the following to hook up the trailer electrics and/or an electric brake controller:
Subject: Lower control arm joint on wheel bearing housing (lower control arm ball joint and wheel bearing housing taper...
Read full bulletin
bushing) Concern: If a customer complains that the steering wheel is shaking/vibrating or out of line, the lower control arm ball joint on the wheel bearing housingmay be damaged. This can occur, for example, if the front wheel hits a curb or similar obstacle. Remedial action: Check lower control arm ball joint on the wheel bearing housing on the affected side of the vehicle: ? Checkbrakedisc ? Check lower control arm ball joint on wheel bearing housing (lower control arm ball joint and wheel bearing housing taper bushing) ? Check axle components and lower control arm ? Perform suspension alignment and if necessary, carry out additional steps for evaluating the problem
Lighting
25 bulletinsProduct Knowledge for Model Type Designations
Product Knowledge for Chassis/VIN Numbering Systems
VAS 621001A Matrix Headlamp Aimer Automatic Shipment / Maha Installation
VAS 621001A Matrix Headlamp Aimer Automatic Shipment / Maha Installation
Parts information for Parts Withdrawal - LED Headlight.
Read full bulletin
Vehicles affected are cars that use the part numbers in the attached PDF.
Product Knowledge for the Porsche evolution from 1948-2025
Technical Information - Malfunction Indicator Light Active / Fault Memory Entry "P242100" or "P242200" in DME Control...
Read full bulletin
Unit: Observe Guided Troubleshooting (10 / 25)
Product Knowledge - Chassis/VIN Numbering Systems
Product Knowledge on the chassis/VIN numbering systems
Technical information on a complaint - seat cover wrinkled
Technical information for the coolant warning light lights up - supposed coolant loss on coolant pump
Product knowledge for the Porsche evolution from 1948-2023.
Technical information for ANB4 - retrofitting locking caps on the front left and right headlights.
Special Tools information for Deutronic Signal Lamps.
Special tools information for new Deutronic Signal Lamps.
Resubmitting at request of Mr.
Read full bulletin
Bernard Hardgrave. Information on fogging lighting components.
Information about updating headlights from LED to Matrix style.
Tools and equipment document highlighting new connector release tool set.
Bulletin highlighting new updates 38.750, 38.750.000 for the Porsche PIWIS Tester 3
Information: This bulletin contains information regarding: ? technically permissible wheel/tire combinations, ?...
Read full bulletin
measures that may be required when changing the wheel/tire combination installed at the factory, ? approved original Porsche alloy wheels and ? approved summer, all-season and winter tires and their tire pressures.
Subject: Connecting links on rear PDCC anti-roll bar Information: The durability of the installed connecting links on...
Read full bulletin
the rear PDCC anti-roll bar cannot be guaranteed over the service life of the vehicle due to amanufacturing defect. This can result in noises and a yellow warning message may be activated. The function of the anti-roll bar may subsequently be impaired, thereby increasing the vehicle's understeer and roll behaviour. If a connecting link is defective, the possibility of damage to adjacent chassis components from the PDCC anti-roll bar cannot be ruled out.
Customer Concern: There are reports of failed Porsche Car Connect (PCC) initializations.
Read full bulletin
Technical Concern: Due to input handling in the VTS software, the Porsche Car Connect initialization fails. The ninth character in the VIN may be an ?X? (e.g. WP0AF2A7XHL123456). However, the system sees this ?X? character as invalid and does not transmit the installation code to the backend server. In this case, the initialization ends unsuccessfully. Additionally, the PCC portal does not register the failed attempt.
Technical Concern: Due to input handling in the VTS software, the Porsche Car Connect initialization fails.
Read full bulletin
The ninth character in the VIN may be an "X" (e.g. WP0AF2A7XHL123456). However, the system sees this "X" character as invalid and does not transmit the installation code to the backend server. In this case, the initialization ends unsuccessfully. Additionally, the PCC portal does not register the failed attempt.
General Information: This bulletin contains information regarding: * technically permissible wheel/tire combinations,...
Read full bulletin
* measures that may be required when changing the wheel/tire combination installed at the factory, * approved original Porsche alloy wheels and * approved summer, all-season and winter tires and their tire pressures.
Subject: Rear spoiler Information: The clamping nut on the connecting link on the rear spoiler can become loose:
Tires & Wheels
24 bulletinsSpecial Tools and Equipment Information for alignment machines - Q3 2026 Software Spec Update Available
Special Tools and Equipment Information for alignment machines - Q2 2026 Software Spec Update Available
Wheel Bolt Replacement Requirement - Change from Wheel Bolts with Aluminum Washers to Wheel Bolts with Steel Washers...
Read full bulletin
(40/26)
Technical information for Checking Dual-Mass Flywheel (DMF) on Vehicles with PDK (11/14)
Parts information for the thatcham wheel lock information.
Read full bulletin
Since model year 2015, nearly all new vehicles (SUV's may have Thatcham or previous style wheel lock) come equipped with Thatcham-style wheel locks from the factory. Each vehicle equipped with Thatcham-style wheel locks uses a unique key. The vehicles affected are cars that use this wheel lock
Parts Information - Thatcham Wheel Lock Information
Manufacturers certificate with information on approved wheels and tires for Panameras from MY17-20.
Instructions on the manufacturers certificate for approved wheels and tires.
Technical information - tire pressure monitoring control unit cannot be accessed using the PIWIS tester: replacing tire...
Read full bulletin
pressure monitoring control unit and control unit holder.
List of approved wheels and tires for the Panamera as of MY14.
List of approved wheels and tires for the Panamera.
2003 to Present All with tire pressure monitoring system.
Resubmitting at request of Mr.
Read full bulletin
Bernard Hardgrave. List of approved wheels and tires for the Panamera.
List of approved wheels and tires for the Panamera.
Special tools information on a measuring and alignment system.
List of approved wheels and tires sets for the 971 Panamera.
Service Campaign information for Porsche workshop campaign WLA8 - Checking Connecting Shaft for Front-Wheel Drive and...
Read full bulletin
Replacing it if Necessary.
Technical information on Checking Dual-Mass Flywheel (DMF) on Vehicles with PDK.
List of approved wheel and tire combinations for the Panamera.
Porsche intranet posting for Workshop campaign WKK2.
Read full bulletin
WKK2 Workshop campaign - Re-programming Tire Pressure Monitoring (TPM) control unit
List of approved wheels and tires for the Panamera.
List of approved wheel and tire combinations for the MY17 Panamera and newer.
Equipment: Tire Pressure Monitoring (TPM) 433 MHz (I-no.
Read full bulletin
7K3) Subject: Control unit for Tire Pressure Monitoring (TPM)
"TIRES ARE IMBALANCED AND VIBRATIONS OCCUR AS A RESULT.
Read full bulletin
CAUSE: IN ORDER TO REDUCE THE NOISE LEVEL FROM THE TIRES, TIRE MANUFACTURERS ARE APPLYING ACOUSTIC FOAM TO THE INSIDE OF THE TIRE."
Fuel System
23 bulletinsParts information for parts withdrawal involving the fuel filler flap and the charge cable for mains socket.
Read full bulletin
Part numbers 976809857E and 7PP971678GS
Parts information for parts withdrawal involving the multi-purpose additive for gasoline.
Read full bulletin
Part number is 00004320902. The vehicles affected are ones that use part number mentioned.
Parts information for parts withdrawal involving the - Diagnosis Pump for Fuel System 958906243B and 958906243A.
Read full bulletin
Vehicles affected are ones that use either of the part numbers mentioned.
Symptom based workshop manual for Eliminating Symptoms on Body Exterior: Cleaning Tailpipe Cover(s) on Exhaust System - Dirt on Tailpipe Cover.
Read full bulletin
The vehicles affected are cars that have the mentioned tailpipe
Parts information for parts withdrawal involving a number of parts for the flange, fuel pump, and fuel filter
Parts information for parts withdrawal involving the rear muffler/high pressure pump
Parts information for parts withdrawal involving the sender for fuel gauge.
Symptom-based workshop manual for a rattling noise from the rear area of the exhaust system.
Symptom-based workshop manual for a rattling noise from the rear area of the exhaust system.
Parts information for parts withdrawal involving the fuel filler flap
Instructions on advanced technical information for Cayenne and Panamera with EVAP faults sought for analysis purposes.
Instructions on advanced technical information for Cayenne and Panamera with EVAP faults sought for analysis purposes.
Instructions on advanced technical information for the Panamera fuel delivery and suspected fuel vapor lock.
Instructions on advanced technical information for fuel delivery and suspected fuel vapor lock for the Panamera.
Instructions for fixing a rattling noise in the rear area of the exhaust system.
Parts withdrawal information for a fuel cap for the 971 Panamera.
Information on retrofitting the MY17 and 18 Panamera and P4 with a sports exhaust system in silver or black.
Instructions for replacing fuel filter in the event that the DMTL is also replaced.
Instructions for correcting a noise symptom on 2017 through 19 Panamera Vehicles.
Read full bulletin
The remedy is to fit a mass on the evaporator line to break up the air causing noise.
Porsche intranet posting for WJ61 campaign, which seeks to check the fuel filler flap and electric charge port door and...
Read full bulletin
replace them if necessary.
Instructions on carrying out the WJ06 Workshop campaign, which is a re-coding of the Gateway control unit.
Read full bulletin
This is needed because a software error that causes the sport exhaust to remain on after switched off.
Information on new model designation logos which can be purchased and applied to the rear exhaust area of a vehicle,...
Read full bulletin
displaying the model designation on the outside of the vehicle.
Symptom: The effort to open and close the fuel filler door is a little more than typically expected.
Read full bulletin
Information for Customer: The extra effort required to open and close the fuel filler door has no negative impact on the vehicle.
Pre-Delivery & Maintenance
19 bulletinsTechnical Information - WRE7- Re-Programming Porsche Rear Seat Entertainment (Workshop Campaign)
Porsche intranet posting with information for workshop campaign WLD5 - replacing hose for positive crankcase ventilation
Porsche intranet posting with information on Workshop Campaign WMM7 - replacing VTS control unit
Special tools and equipment for the VAG 1561 storage kit in foam with blades
Information for recall campaign WMM7 replacing VTS control unit.
Instructions on how to remedy a loose push button on the storage compartment cover of the center console.
Porsche intranet posting with preliminary information on WLN1 stop sale/workshop campaign.
Service campaign information for Porsche Workshop Campaign WKH7 - Re-Programming DME Control Unit.
Info on a new customer tool for looking up campaigns and recalls on their vehicle.
Porsche intranet posting for WS Campaign WLC9.
Porsche intranet posting for Workshop campaign WLB7.
Porsche intranet posting for Workshop campaign WJ20.
Repair instructions for Workshop Campaign WJ20, which seeks to replace the Stability management control unit (PASM) on...
Read full bulletin
affected Panamera vehicles.
Parts withdrawal for various parts that were used in Recall and workshop campaigns.
Porsche Intranet posting outlining the Warranty Credit stop that takes place at the end of every calendar year.
Bulletin outlining SD card storage for PIWIS Testers.
Notice to dealers that coolants will be moved out of the special tool cabinet in the dealer service department in order...
Read full bulletin
to make room for new special tools. All coolant tools will be moved to the "Coolant Cart" because they need to be housed in the same place.
Technical Concern: This failure is often accompanied by a long list of instrument cluster faults, including "C11011 - Control unit faulty, watchdog".
Read full bulletin
All reported cases have been at PDI or with very low mileage. Service Information: The recommended repair is to replace the instrument cluster. Only part numbers with suffix "G" or later should be used.
Information: Very small leaks may not be found on a normal inspection.
Read full bulletin
Extra effort to locate these leaks is required.
Transmission
16 bulletinsWarranty Information: Warranty Extension for Transmission Electronics Control Unit (18/26)
Permanent Fault Memory Entries P1775/P071400/P184900 in Transmission Electronics Control Unit (PDK) (09/26)
Parts information for parts withdrawal involving the transmission oil.
Read full bulletin
Part number 00004321012 is affected - the vehicles that use this part number should be included.
Parts information for parts withdrawal involving the transmission oil.
Read full bulletin
The vehicles affected are ones that use the part number 00004330563
Parts information for parts withdrawal involving the transmission fluid.
Read full bulletin
Part number 00004321048. The cars affected are ones that use the part number listed.
Technical information for a Permanent Fault Memory Entries P1775/P071400/P184900 in Transmission Electronics Control...
Read full bulletin
Unit
Parts information for parts withdrawal involving the (00004321048) Transmission fluid.
Read full bulletin
The vehicles affected are ones that use the part number mentioned.
Parts information for parts withdrawal involving the 7 speed dual clutch gear box.
Read full bulletin
Part numbers 0BG300047 and 0BG300047X are affected. Cars that are involved are ones that use the part numbers mentioned.
Parts information for parts withdrawal involving (PAD423051B) the Steering Gear with Track Rods.
Read full bulletin
The vehicles affected are cars that use the part mentioned.
Technical information for AMC2 - reprograming DME and transmission control unit.
Advanced technical information regarding roughness in the PDK transmission during the adaption phase.
Various repair symptoms and their associated repairs for all PDK transmissions.
Porsche Intranet posting for campaign WJ89, which seeks to reprogram the instrument cluster so that the wrong vehicle...
Read full bulletin
order is not stored in the PDK transmission.
Information: With the current transmission software, a clicking noise can be heard in the drive train on the affected...
Read full bulletin
vehicles under certain driving conditions. The customer may hear this noise during a load change while driving slowly, for example
Condition The customer experiences an interruption in Apple CarPlay service after selecting the reverse gear.
Read full bulletin
In other words, after the PCM screen displays the reverse camera, the PCM screen will not display Apple CarPlay until the user resets the PCM (perhaps by cycling the ignition).
Symptom: Hard or jerky gear changes.
Read full bulletin
Cause: This is caused by the transition phase when changing from the engaged gear to the target gear. Various components of the powertrain affect the shifting quality. Remedial Action: In the event of a customer complaint, use PIWIS Tester III with software 36.400.020 (or higher) installed to: ? re-program and code the Tiptronic control unit via "Automatic programming" and ? reset the adaptation values.
Infotainment
10 bulletinsParts information for parts withdrawal involving the display and controls.
Read full bulletin
The list of part numbers are provided in the PDF. The vehicles affected are cars that use those part number(s).
Parts information for parts withdrawal involving the windscreen.
Read full bulletin
Vehicles affected are cars that use part numbers 992845011Q, 992845011AN, 992845011S, 992845011AM, 992845011BL, 992845011DB, 992845047DY, 992845047FY
Parts information for parts withdrawal involving the windscreen.
Read full bulletin
The cars involved are cars that use the part numbers 992845011Q, 992845011AN, 992845011S, 992845011AM, 992845011BL, 992845011DB, 992845047DY, 992845047FY
Technical information for a replacement display unit for rear seat entertainment - observing procedure when replacing...
Read full bulletin
component.
Instructions on advanced technical information for the display of "coolant temperature too high"
Instructions on advanced technical information for the display of coolant temperature showing too high in the Panamaera,...
Read full bulletin
Macan, and Cayenne.
Instructions on advanced technical information for a display of "coolant temperature too high" on the Panamera, Macan,...
Read full bulletin
and Cayenne.
Technical Bulletin outlining what to do if when programming a new key the message displays "No Information Available".
Read full bulletin
The rear end electronics Control Unit must be recoded in this event.
Instructions on new tools used for recalibrating the Heads Up Display on Panamera and Cayenne models.
Technical Concern: This failure is the result of faulty message monitoring within the instrument cluster.
Read full bulletin
Because the instrument cluster cannot properly detect and display the current cruise control status, the cruise control does not engage. Service Information: The recommended repair is to replace the instrument cluster. Only part numbers with suffix "G" or later should be used.
HVAC & Climate
8 bulletinsSymptom based workshop manual for Refrigerant Loss Possible Misdiagnosis due to Fluorescent Corrosion Protection at the...
Read full bulletin
Electric Air-Conditioning Compressor
Parts information for parts withdrawal involving the compressor.
Read full bulletin
Part numbers 971260601Q, 971260601QU,971260601QX, 971260601RU, 971260601SU, 971260601SX, 971260601R, 971260601RX are all affected. The vehicles that use any of the part numbers listed should be considered for this.
Instructions on advanced tehcnical information for the Panamera climate control - setting are not retained with memory...
Read full bulletin
settings
Porsche intranet posting for WKJ0 campaign, which seeks to reprogram the control unit for the air conditioning system on...
Read full bulletin
affected vehicles.
Announcement of a 6 month warranty extension on VAS 581005P R1234yf Service Units for air conditioning.
Instructions for using VAS 581005P in order to chech and service R1234yf Air Conditioning Unit.
Instructions for re-programming the Air Conditioning Control Unit on affected Panamera vehicles.
Read full bulletin
Faults stored in the control unit may cause the air conditioning air flow to work notas intended according to selected positions.
There is a possibility that the front camera heater on the affected vehicles will be switched on more often than...
Read full bulletin
required at low temperatures due to incorrect coding. This can result in material fatigue over the service life of the vehicle and the front camera can stop working. As a result, the "Camera system fault" warning will be displayed in the instrument cluster and camera-based assistance systems, such as lane departure warning, pedestrian warning, traffic sign recognition and Full beam assist will fail. Remedial Action: Re-code front camera control unit.
Suspension
7 bulletinsParts information for Parts Withdrawal - Hub Cap.
Read full bulletin
Part numbers involved are 9Y0601149F, 9Y0601149G, 9Y0601149H, 9Y0601149J, 9Y0601149L, and 9Y0601149M. The vehicles affected are ones that use the part numbers mentioned.
Parts information for parts withdrawal involving the retaining spring.
Read full bulletin
The vehicles affected are cars that use part number 95C615269E
Parts information for parts withdrawal involving the air spring
Technical information - adjust values for suspension alignment: using current values and observing specifcations.
Parts withdrawal information for a control arm.
Snow chains: ? have been tested and approved for the rear axle of the Panamera (971).
Read full bulletin
The fitting of snow chains on the front axle is NOT permitted! ? have plastic elements (clips, eyelets and sleeve on the spring steel clip) to protect the rim from damage. ? can be fitted easily in the narrow wheel housing on the rear axle using the spring steel clip. ? can be repaired by retail outlets if necessary.
Snow chains: ? have been tested and approved for the rear axle of the Panamera (971).
Read full bulletin
The fitting of snow chains on the front axle is NOT permitted! ? have plastic elements (clips, eyelets and sleeve on the spring steel clip) to protect the rim from damage. ? can be fitted easily in the narrow wheel housing on the rear axle using the spring steel clip. ? can be repaired by retail outlets if necessary.
Air Bags & Safety
6 bulletinsInstructions on advanced technical information for the red warning on the instrument cluster.
Read full bulletin
Occupant seat belt not fastened.
Technical information for APA9 - replace screw connection for seat belt mount at rear left and/or right
Instructions on advanced technical information for the red warning instrument cluster - occupant seat belt not fastened.
Instructions on advanced technical information for red warning in the instrument cluster - occupant seat belt not...
Read full bulletin
fastened.
Advanced technical information for a red warning light in the instrument cluster for the seat belt not fastened.
Information: Due to a software error, there is a possibility that the enhanced seat belt diagnostic function may not...
Read full bulletin
detect the driver's correctly fastened seat belt on the affected vehicles. If this happens, the warning message "Driver seat belt not fastened, Fasten seat belt" will be displayed in the instrument cluster. Remedial Action: Re-program the airbag control unit using the PIWIS Tester with software version 35.650.010 (or higher) installed.
Steering
5 bulletinsParts Withdrawal - Steering Column Switch
Parts information for parts withdrawal involving the rear axle steering.
Read full bulletin
The part numbers are 992501031H, 992501032H, 992501033AB, 992501033AC. The vehicles affected are cars that use the part numbers listed
Technical information for Intermittent Warning Message for Power Steering Failure / Fault Memory Entry B202700 in the...
Read full bulletin
Power Steering Control Unit: Observe Specified Procedure
Instructions for how to fix an issue where the steering column will not adjust upwards or downwards.
Information on possible rumbling noise and vibrations in steering wheel when Air Conditioning is at its highest setting.
Read full bulletin
Also contains procedure for reworking A/C compressor to eliminate symptoms.
Hybrid & EV
2 bulletinsInformation on advanced technical information for the wall charger connect - ground fault troubleshooting
Instructions for installing a new universal charger on vehicles where the vehicle cannot be charged using the main 208V...
Read full bulletin
main power supply.