2021 Polaris Slingshot SL TSBs

intrusion or fogging present in the gauge clusters, similar to gauge clusters in other off-road and marine applications.

This version has been translated into French.

reflector(s).

reflector(s).

Testing of returned alternators indicates that the alternator was not the root cause and did not require replacement.

Testing of returned alternators indicates that the alternator was not the root cause and did not require replacement. The terminal of the excitation wire may become opened, damaged, or pushed back during installation of the connector to the alternator, resulting in the alternator not charging intermittently.

or the vehicle has not been used for several days. As a result, the lock and unlock buttons are inoperative until the security system is enabled in Digital Wrench. An updated VCM (Vehicle Control Module) software has been released to address this concern.

It highlights the operation of the MY20+ models as well as some issues we have been seeing and some of the challenges in diagnostics.

Additionally, steps are provided on how to properly calibrate the SAS.

The quickest way to address this is the following: 1. Reset both Trip meters 2. Reset the AVG FUEL ECONOMY 3. Disconnect the battery for 20 minutes. 4. Reconnect and test ride vehicle for minimum 20 miles to get an average economy again.

In addition to new speakers, Model Year 2020+ Slingshot vehicles will now require RIDE COMMAND 7" Display displays to have the appropriate tune file set during RIDE COMMAND 7" Display installation, or when upgrading to the new speakers.

to display replacement.

Display Powered by RIDE COMMAND.

Display Powered by RIDE COMMAND.

prematurely under certain volume and equalizer setting conditions. Vehicles can exhibit crackling, popping, low output or no sound from one or both of the speakers.

neutral condition on AutoDrive equipped vehicles when coming to a stop as a result of a faulty brake pressure switch. Fault codes commonly associated with these symptoms are C2144 (SPN 2584) and P150A (SPN 520275). Starting in Model Year 2024, Slingshot will use a new single switch configuration. Polaris has released a single brake pressure switch service kit that is compatible to retrofit prior model years. This Service Advisory provides instruction to update vehicles with the new single switch service kit in the event of a brake pressure switch failure.

Updated information has been added to the Service Manual to provide dealers with clear direction on how to properly install the clutch assembly as well as additional repair steps.

unit having some difficulties completing this calibration.

Slingshot vehicles equipped with Prostar 2.0 engines.

which could lead to engine damage.

installed in vehicles do not fully conform to Federal Communications Commission (FCC) requirements. As part of our program to address this matter, Polaris is sending letters to impacted consumers to outline the nature of this matter and provide options on having updated software installed. Consumers will be encouraged to perform the update themselves but will be given the option to bring vehicles into a dealership for this software update to be performed at no cost to them.

2022 transmission calibration at no cost. The 2022 TCM calibration provides further refinements to the 2021 calibration including fine-tuning to shift speed and reverse engagement engine speed. The calibration is currently available through Digital Wrench II for all 2020-2021 AutoDrive vehicles even if they had TSA-20-01 previously performed.

Updates to the Service Manual have been made to address the new belt tension spec and updated tension process. Model Year 2024 Slingshot produced after 2/20/24 will come with the new belt 3212345 installed.

This Team Tip outlines the importance of all Loctite residue being removed from components as well as proper installation.

SLS7AB.M32336A (sent over the air in September 2023) may not be able to access Vehicle Health and Vehicle Location in the Slingshot App and website, and are also no longer able to receive future OTA (Over The Air) updates. A software update to resolve this issue was made available for installation in November 2023 (software update SLS7AB.M32343A). Please visit ridecommand.slingshot.polaris.com to obtain this software update, along with how-to guides and instruction videos.

models.

value during the assembly process.