2022 Peterbilt 579 TSBs

expansion valve (TXV) will help maintain optimal performance and protect the evaporator core tubing and TXV seals. PB: On certain Model 579 BEV chassis, installing an updated A/C suction line between the A/C compressor and thermostatic expansion valve (TXV) will help maintain optimal performance and protect the evaporator core tubing and TXV seals."

This update provides customers with additional time to service their trucks before a DEF-related derate occurs. The software is being offered to customers in alignment with recently updated regulatory agency guidance.

This update provides customers with additional time to service theirtrucks before a DEF-related derate occurs. The software is being offered to customers in alignment withrecently updated regulatory agency guidance."

policy."

crank-mounted fan drive may experience a short due to chafing or water ingress, affecting fan drive operation.

specifications.

engines.

This failure can cause significant damage to the engine. New intake valve springs will be installed.

system inspection process for all engine air intake system components.

When troubleshooting Cummins X15 fault codes 555 or 556, follow this additional testing, inspection, and documentation procedure to help identify the root cause of dusted engines. This is not a stand-alone process but must be used alongside Cummins troubleshooting steps. Cummins Quickserve will reference this bulletin for fault codes 555 or 556.

have an exempt engine label installed.

This may cause the transmission not to shift and the transmission service lamp to illuminate.

Loss of communication between the right-hand shift stalk and the vehicle may result in the vehicle being disabled after it comes to a stop, thereby increasing the risk of crash or injury. A warning will appear on the dash display when communication is lost, including transmission or engine warnings, ! next to DNR/DNRP indicator, - in the DNR/DNRP indicator, and/or chimes, depending upon whether you are operating a diesel/gas or battery electric vehicle.

Injectors must be replaced as a full set (6 injectors) and associated software must be updated at the same time.

PCI-2 software on these chassis must be reverted from NA202 to NA201 (Pack 2 injectors) or from NA206 to NA191 (Pack 1 injectors) to prevent incorrect STOP lamp display.

A new Starter Troubleshooting Guide has been created to provide a comprehensive list of starting system checks, which should reduce unnecessary starter replacements and associated warranty claims. Engine starting system warranty claims now require a completed Starter Checklist, a Battery Pack Midtronics Report, and a Cable Drop Midtronics Report. Claims filed without these documents may be denied.

Fuel Filters must be changed before first cleaning. EPA2021 injector cleaning is referenced in RMI for certain injector faults. Complete the procedures in E290. Discard any previous versions of E290 procedures always use the most current document from the link in the bulletin.

Added new coverage tables and PartsLists for GHG/Vehicle Parts and ZEP/BEV Parts. 03/07/2022 - New Emissions bulletin which consolidates older versions and accounts for new CARBemissions requirements that go into effect with Engine Model Year 2022.

With full suspension articulation, HCV bracket flexes and toggles over center the HCV linkage, which results in either deflated airbags or makes them unable to inflate. Fix-as-fail start date is 07/30/2024.

contamination that occurred during manufacturing. SCR Catalyst assemblies will be inspected and replaced as necessary.

application and/or under torqued and could become loose and/or fail. Procedures are available to replace and properly torque the hardware.

.Debris and contaminants introduced into the high-pressure fuel system. .Denial of warranty claims for injector and/or fuel system faults. .Misfire, rough running, engine knock, and other associated faults and symptoms. Correct fuel filter procedures are outlined in attached service documentation.

application and/or under torqued and could become loose and/or fail. Procedures are available to replace and properly torque the hardware.

MX-13 engine and PACCAR 160-amp alternator, the alternator positive cable may chafe against the left-hand side, front spring bracket, top rearward fastener, if the fastener was installed with the head on the outside of the frame rail. Chafing of the alternator positive cable insulation may result in an increased risk of a fire.

MX-13 engine and PACCAR 160-amp alternator, the alternator positive cable may chafe against the left-hand side, front spring bracket, top rearward fastener, if the fastener was installed with the head on the outside of the frame rail. Chafing of the alternator positive cable insulation may result in an increased risk of a fire.

This is a one-time reimbursement. Only customers who have received E290 injector cleaning qualify for this reimbursement. See bulletin for limits and purchase tracking requirements.

display incorrect restriction levels. The virtual gauge will be temporarily disabled until are vised sensor strategy is developed.

Cummins X15, X12, ISX12, ISX12N, L9N, PX-7, and PX-9 engines The technology will leverage the existing Remote Diagnostic cs hardware to deliver secure software updates remotely. This will reduce downtime and save on maintenance costs for eligible vehicles.

(HCV) arm may be rubbing on other components when the bend in the arm is facing outboard. Flipping the bend in the HCV arm inboard prevents the rub.

a Particulate Matter (PM) sensor are required to have a PM sensor installed and the engine software updated. This is required for chassis to comply with current emissions standards.

Service

Cummins Recall C2402.

latest prognostics bulletin verbiage.

The bulletin will be updated when more information is available."

procedure has been updated with additional note boxes for clear instructions. PB: The repair procedure has been updated with additional note boxes for clear instructions."

(PB) Certain Model 367 / 389 / 567 / 579 / 589 have updated GHG labels available for order and installation.

(PB) Certain Model 367 / 389 / 567 / 579 / 589 have updated GHG labels available for order and installation.

This is not a stand-alone procedure. Cummins Quickserve troubleshooting will specify the use of these procedures while troubleshooting specific fault codes.

Failure to do so may result in warranty claim denial. See the procedure section for more details.

Support Order Inquiry case.

the end customer.

Service Information Record (SIR) at the time of RO open date to qualify. Also, Through Standard Warranty or any applicable active Extended Warranty verbiage was removed from Warranty section.

Recommended Repair T016C has been updated from 6.4 hours to 6.9 hours. SRT codes updated in PRWS Claim Coding Table: B25-17A for 6.9 hours created to replace all other codes. 26-040: Warranty section updated to include 0.5 hours for test drive. Recommended Repair 26040C has been updated from 6.4 hours to 6.9 hours. SRT codes updated in PRWS Claim Coding Table: B25-17A for 6.9 hours created to replace all other codes.

resources for new Programmable Torque Tool.

EPA2021 injector cleaning is referenced in RMI for certain injector faults. Complete the procedures in E290. Refer to E300 for in-tank additive information.

latches.

control unit (VECU2) and digital display (DD). Steps have also been added to the PACCAR Common Rail Injection 2 (PCI2) software verification.

installation.

Certain Peterbilt 579EV and 520EV chassis have the First Responder Guide (FRG) label incorrectly showing the cut loop on the wrong side and are missing the Low Voltage Battery Disconnect Switch and Do Not Jump Start labels. These labels are now available for installation.

to provide general use information. The new EMUX Service Tool Kit improves cab & chassis electrical troubleshooting efficiency, while reducing risk of component damage. 4/29/2025: The Ethernet Multiplexed Architecture (EMUX) Service Tool Kit and individual kit components are now available to order. Dealers that have received their first kit may order an additional kit. The EMUX Service Tool Kit Part number has been updated to match OEM drawings (P74-1045-001). Individual kit component part numbers can be found in the Reference Bill of Materials sheet. The new EMUX Service Tool Kit improves cab & chassis electrical troubleshooting efficiency, while reducing risk of component damage. Information Only New diagnostic tool is required to support PACCAR Ethernet Multiplexed Architecture (EMUX). The EMUX Service Tool Kit will help improve cab & chassis electrical troubleshooting efficiency, while reducing the risk of component damage.

Voltage Interlock Loop (HVIL)circuit configurations may experience a sudden loss of high voltage power with unintended opening of electrical contactors, which may occur without warning. This can result in a loss of propulsion and may increase the risk of a crash. This bulletin will be updated once parts and procedures are available.

This software update corrects or improves certain functions. Software update procedures have been revised. Campaign start date is 12/05/2024. Campaign A software update is available for 520EV and 579EV Battery Electric Vehicles. This software update corrects or improves certain functions. Campaign start date is 12/05/2024.

Loop(HVIL) circuit configurations may experience a sudden loss of high voltage power with unintended opening of electrical contractors, which may occur without warning. This can result in a loss of propulsion and may increase the risk of a crash. Software version verification, along with the installation of an upgraded circuit overlay harness kit, is required to address this issue.

Low Voltage Distribution System (LVDS) Components. Affected chassis will be inspected and necessary components will be installed.

The EMUX Service Tool Kit will help improve cab & chassis electrical troubleshooting efficiency, while reducing the risk of component damage.

Vehicles.

(ARC 1/22/24)

possible rub to the hood harness.

causing possible damage.

This bulletin update includes an installation procedure for the module and instructions to enable software functionality. Vehicles shipped with a pre-wire condition are now eligible for this customer paid installation of battery monitor modules as requested.

performing the software update.

experience battery movement on the side where the single battery resides. This bulletin contains a procedure to fabricate a bracket to hold this battery in place.

A VECU software update is available to resolve the issue.

Updated VECU software is available to resolve the issue.

housings.

left-hand or right-hand blind spotters, may set false Diagnostic Trouble Codes (DTC) 522490-9 or 522491-9. These DTCs can be ignored if corresponding blind spotter is not equipped. The next Digital Vision System Mirrors (DVS-M) software update will correct these false DTCs.

may experience bracket failure causing the bracket and camera to fall from the windshield.

fatigue from external forces such as reverse towing.

fender and the bottom of the trailer/equipment are susceptible to damage. The lack of clearance could result in cracked/broken quarter fenders or complete separation if undetected or un-remedied.

Washer pumps may fail to spray due to a clogged filter.

Certain model year 2021 to 2024, 567 and 579 vehicles built from 06/22/2020 through 06/16/2023 were equipped with air tank bracket G11-6439-009mounted behind a fuel tank without a frame spacer. The air tank mounting U-bolt tips may be different lengths and could contact the fuel tank, which can result in a hole and the potential for a fuel leak. Leaking fuel may lead to an increased risk of a fire.

Removed in-tank additive references.

were equipped with air tank bracket G11-6439-009mounted behind a fuel tank without a frame spacer. The air tank mounting U-bolts are different lengths and may contact the fuel tank, which can result in a hole and the potential for a fuel leak. Leaking fuel may lead to an increased risk of a fire. At this time, parts are not yet available to complete the necessary repairs. Once parts become available, this bulletin will be updated.

Slow or no response from PCI-2 when requesting freeze frame data using DAVIE4 (DM25).

This procedure also provides information to determine if it is necessary to replace the fuel injectors.

Gateway (PMG001) will experience severe 3G service degradation as early as January of 2022. Chassis currently utilizing 3G antennas as a primary antenna may experience this degradation.

A redesigned bracket can be purchased that relocates the marker bracket to the front fuel tank bracket to eliminate interference.

2 chassis added to the chassis list. Peterbilt: Dealers should check the chassis list and SIR weekly for VIN changes. 10 chassis added to the chassis list."

midship one-piece aluminum crossmembers.

system pressure decay, provide test results, and pass/fail criteria. Your DAVIE tool must be at version 24.05 or newer for the test to be available. A test procedure document has also been made available that shows all necessary setup and testing procedure criteria (procedure document attached in Links section). The DAVIE4 Check the air pressure decay rate test and the test procedure document MUST be followed anytime a chassis comes in for a warranty related air system repair where excessive air system pressure decay is suspected. Warranty claims filed for air system pressure decay may be denied if DAVIE4 test AND test procedure have not been followed.

An incorrectly programmed software parameter results in a failed signal from the electronic stability control (ESC) system to the dash lamp that indicates a malfunction. Updating the software parameter via Davie4 resolves the issue.

the headlamps, fog lamps or turn signals are not on. This is non-compliant with Canadian Regulation CMVSS 108, which states that the DRLs must be on while the vehicle is in motion without certain other lamps being activated. This bulletin will be updated when a repair is available.

Oil from the air shift cover of the PTO may leak into the air line, causing the EOA solenoid to become inoperative.

adapter harness with the improved harness and clear the DTCs.

is not set feature operates incorrectly due to a software issue. Software will be corrected when available.

The cab heater coolant system on Peterbilt 579EV and 520EV models may not deaerate properly, causing pump malfunctions and inadequate cab heating. Update coolant deaeration return line parts and procedures are now available to release trapped air back to the reservoir.

Certain Vehicle Model Year 2021-2025 Peterbilt chassis configured for trailer towing require a software update for the Bendix EC80 ABS ECU. Software update procedures for certain Battery-Electric Vehicles (BEV) and EC80 ABS ECU part numbers are not yet available. This bulletin will be updated when software update procedures are available for these chassis. Safety Recall publish date: 1/10/25

R5.00_002 software update shown in the Introduction section. This repair involves replacement of the Bendix ABS ECU with an updated version and a software update to R5.00_003. Repairs for model 520EV will be available at a future date.

This may cause an intermittent warning light on the dash display.

MUX switches, and Kick Panel.

5 chassis have been added to the chassis list. The total chassis population is now 15,637.

The driver could be unaware of an issue with the methane detection system or excessive methane present, increasing the risk of a fire, crash and/or personal injury. The repair procedure will be added when it is available.