Powered byNHTSA|EPA|Community Reports|Updated

2022 Peterbilt 537 TSBs

25 Technical Service Bulletins across 8 categories

Engine

8 bulletins
11026415

The right-hand shift stalk may have an improper wire harness terminal crimp within the wire harness connector.

Read full bulletin

Loss of communication between the right-hand shift stalk and the vehicle may result in the vehicle being disabled after it comes to a stop, thereby increasing the risk of crash or injury. A warning will appear on the dash display when communication is lost, including transmission or engine warnings, ! next to DNR/DNRP indicator, - in the DNR/DNRP indicator, and/or chimes, depending upon whether you are operating a diesel/gas or battery electric vehicle.

11010926

Info Only Unnecessary starter replacements can result from customer complaints regarding engine starting issues.

Read full bulletin

A new Starter Troubleshooting Guide has been created to provide a comprehensive list of starting system checks, which should reduce unnecessary starter replacements and associated warranty claims. Engine starting system warranty claims now require a completed Starter Checklist, a Battery Pack Midtronics Report, and a Cable Drop Midtronics Report. Claims filed without these documents may be denied.

11005569

07/24/2024 - Updated the Emissions Warranty Coverage tables.

Read full bulletin

Added new coverage tables and PartsLists for GHG/Vehicle Parts and ZEP/BEV Parts. 03/07/2022 - New Emissions bulletin which consolidates older versions and accounts for new CARBemissions requirements that go into effect with Engine Model Year 2022.

11000756

On certain Peterbilt, New Medium Duty chassis that are equipped with the optional engine intake air Pre-Filter (option...

Read full bulletin

code 3281830) the Pre-Filter may become clogged and cause premature failure/breach of the primary intake air filter. In some cases, a failed/breached primary filter can result in unusually high engine RPMs and high crankcase pressure. However, a failed/breached primary filter may not exhibit any of these symptoms. The immediate fix for this issue is to modify the Pre-Filter by removing the filter media from the base plate, and then reinstalling the modified Pre-Filter base plate.

10248328

Certain 536, 537, 548, and 567 chassis built with 2.1m Medium Duty End of Frame Trailer Connections and Tractor...

Read full bulletin

Protection Valves may not meet the standard trailer brake release timing requirements by 0.5 seconds. A delay in the trailer brake release may create momentary instability to the trailer and increase the risk of a crash.

10244482

Certain 536, 537, and 548 chassis built with 2.1m Medium Duty End of Frame Trailer Connections may exceed the standard...

Read full bulletin

trailer brake release timing requirements by 0.5 seconds due to the size of the tractor protection valve fitting and hose. A delay in the trailer brake release can create instability to the trailer and increase the risk of a crash.

10237151

Safety Recall The brake pedal plunger which connects the brake pedal to the brake valve may dislodge after the pedal is...

Read full bulletin

fully depressed, and rapidly released (side slip foot brake release). If the plunger in the brake pedal assembly dislodges the driver may be unable to apply the service brakes, which may increase the risk of a crash.

10225578

Info Only - PACCAR is introducing Over-the-Air (OTA) software updates for engine MY17 and newer chassis equipped with...

Read full bulletin

Cummins X15, X12, ISX12, ISX12N, L9N, PX-7, and PX-9 engines The technology will leverage the existing Remote Diagnostic cs hardware to deliver secure software updates remotely. This will reduce downtime and save on maintenance costs for eligible vehicles.

Software & Calibration

7 bulletins
11036291

The verbiage in the Introduction section has been updated.

11033918

"KW: A new recommended repair has been added to verify the software level and close the campaign in SIR.The repair...

Read full bulletin

procedure has been updated with additional note boxes for clear instructions. PB: The repair procedure has been updated with additional note boxes for clear instructions."

11032290

Bogie Crossmember Torque Value Update - Procedure has been updated to correct torque values.

11030916

Sheppard Recall Order Process Update - The Parts section has been updated with revised steps for opening a TCS365 Order...

Read full bulletin

Support Order Inquiry case.

11029738

The Parts section has been updated to clarify that freight charges for safety recall orders should not be passed on to...

Read full bulletin

the end customer.

11016473

As of 03/25/2025, this campaign has resumed.

Read full bulletin

Software updates are now available to complete this campaign.

10219235

The service information for Bendix Air Dryer maintenance is being updated to include new procedures.

Transmission

3 bulletins
11000767

Information Only New tools are required to support PACCAR TX-8 / ZF transmissions.

Read full bulletin

Part numbers E0l-1012 (Adapter, Jack TX-8), E0l-1014 (Front Seal Installer), and E0l-1015 (Rear Seal Installer) are currently available to order

10252585

INTERIM Safety Recall Parts are not currently available for this safety recall.

Read full bulletin

This bulletin will be updated once repair parts are available. The right-hand shift stalk may have an improper wire harness terminal crimp within the wire harness connector. Loss of communication between the right-hand shift stalk and the transmission may result in the vehicle becoming disabled after it comes to a stop thereby increasing the risk of crash or injury. A transmission fault will appear on the dash display if communication is lost.

10208766

On certain Model Year 2022chassis with manual transmissions, the optional audible alarm when door is open and park brake...

Read full bulletin

is not set feature operates incorrectly due to a software issue. Software will be corrected when available.

Body & Paint

2 bulletins
11033351

Troubleshooting procedures for 2.1m cab power windows are now available.

10251172

SAFETY RECALL Certain 535/536/537/548 chassis may have cab mirror glass lock rings not fully seated.

Read full bulletin

This could result in loss of mirror glass, reducing rear visibility and increasing the risk of an accident or injury. Missing mirrors cause non-compliance with FMVSS 111 / CMVSS 111. Mirror glass lock rings must be inspected and, if necessary, reseated.

Fuel System

2 bulletins
11029787

Cummins TSB 210203 has been updated to remove the PACCAR suction side fuel filter part number from Table 1 as the filter...

Read full bulletin

is no longer compatible.

10208758

Due to major data carriers phasing out 3G networks, chassis currently utilizing first generation Peoplenet Mobile...

Read full bulletin

Gateway (PMG001) will experience severe 3G service degradation as early as January of 2022. Chassis currently utilizing 3G antennas as a primary antenna may experience this degradation.

Other

1 bulletin
11037541

"Kenworth: Dealers should check the chassis list and SIR weekly for VIN changes.

Read full bulletin

2 chassis added to the chassis list. Peterbilt: Dealers should check the chassis list and SIR weekly for VIN changes. 10 chassis added to the chassis list."

Brakes

1 bulletin
11013775

Safety Recall Updated software and procedures are now available.

Read full bulletin

Certain Vehicle Model Year 2021-2025 Peterbilt chassis configured for trailer towing require a software update for the Bendix EC80 ABS ECU. Software update procedures for certain Battery-Electric Vehicles (BEV) and EC80 ABS ECU part numbers are not yet available. This bulletin will be updated when software update procedures are available for these chassis. Safety Recall publish date: 1/10/25

Lighting

1 bulletin
11009863

13-065 DAVIE4 Chassis Air Leak Testing Info Only A new test is now available in DAVIE4 to properly measure chassis air...

Read full bulletin

system pressure decay, provide test results, and pass/fail criteria. Your DAVIE tool must be at version 24.05 or newer for the test to be available. A test procedure document has also been made available that shows all necessary setup and testing procedure criteria (procedure document attached in Links section). The DAVIE4 Check the air pressure decay rate test and the test procedure document MUST be followed anytime a chassis comes in for a warranty related air system repair where excessive air system pressure decay is suspected. Warranty claims filed for air system pressure decay may be denied if DAVIE4 test AND test procedure have not been followed.