2014 Peterbilt 320 TSBs
29 Technical Service Bulletins across 9 categories
Categories
Electrical
10 bulletinsInformation Only: This bulletin provides dealers with a battery warranty quick reference guide to ensure the...
Read full bulletin
appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplete information.
Fix as Fail: For all conventional models, except 387/587, equipped with Side-of-Cab (SOC) exhaust and built from...
Read full bulletin
03/6/2006 to 1/20/2020, the clamps that secure the SOC exhaust stacks may not be tightened properly. This may allow the exhaust stack to rotate and contact the cab or sleeper.
Information Only Vehicles may have the connector seals on the wheel speed sensor incorrectly installed, which may lead...
Read full bulletin
to water intrusion and corrosion in some vehicles.
Information Only: Proper jump-starting voltage will eliminate high voltage related issues and equipment damage.
Information Only: Vehicles may have the connector seal on the wheel speed sensor incorrectly installed, which may lead...
Read full bulletin
to sensor corrosion.
Fix as Fail: Peterbilt has initiated an improvement to the Model 320/520 power window module.
Read full bulletin
A vapor barrier will be installed over the module to prevent moisture.
Information Only - Quick Reference Guide for Electric harness damage repairs.
Fix-As-Fail: Repair for horizontal exhaust diffuser configurations with broken brackets or cracked diffuser.
CUMMINS: THE RELAYS AND FUSES OF AFTERTREATMENT SYSTEMS, IN WIRING HARNESS, IS POTENTIALLY NOT ADEQUATELY SECURED VIA...
Read full bulletin
ORIGINAL EQUIPMENT MANUFACTURE (OEM) AND HAVE WIRE RUBBING POINTS, RELAY DAMAGE OR RUB POINTS. *PE
PETERBILT: AN ACTIVE FAULT CODE 3911, AMMONIA SENSOR COMMUNICATION, MAY BE DISPLAYED AND A REPAIR STRATEGY IS BEING PROVIDED.
Read full bulletin
MODEL 320. *PE
Software & Calibration
5 bulletinsThe service information for Bendix Air Dryer maintenance is being updated to include new procedures.
Information Only - Vehicles built with NAMUX software from 2013 to present may experience accuracy issues with the tachometer.
Read full bulletin
The issue can be temporarily resolved using any one of the included procedures.
Fix as Fail: Vehicles built with NAMUX software part number P30-1032-xxx and not updated require an ESA update.
Information: Bendix ACOM Software version 6.16.5.0 for diagnostics may introduce an unrecoverable error.
Read full bulletin
Notice to dealers to replace this version with older software version until Bendix introduces new version.
Information - Recommended Practices for Updating ESA Software
Engine
4 bulletinsInfo Only Unnecessary starter replacements can result from customer complaints regarding engine starting issues.
Read full bulletin
A new Starter Troubleshooting Guide has been created to provide a comprehensive list of starting system checks, which should reduce unnecessary starter replacements and associated warranty claims. Engine starting system warranty claims now require a completed Starter Checklist, a Battery Pack Midtronics Report, and a Cable Drop Midtronics Report. Claims filed without these documents may be denied.
An engine software update is required to resolve OBD system readiness, DEF doser diagnostics, and otherOBD system...
Read full bulletin
software related issues.
PETERBILT: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER.
Read full bulletin
CERTAIN TRUCKS, AT TIME OF ASSEMBLY, MAY NOT HAVE A PROPERLY SEATED UPPER REVERSE IDLER FEED TUBE (OIL SUPPLY LINE), RESULTING IN BEARINGS HAVING REDUCED OIL PRESSURE. *PE
PETERBILT: THE MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATES DUE TO AN ENGINE CONTROL UNIT (ECU) SOFTWARE ISSUE, REAR NOX SENSOR, OPERATING CORRECTLY.
Read full bulletin
*PE
Other
3 bulletins"Kenworth: Dealers should check the chassis list and SIR weekly for VIN changes.
Read full bulletin
2 chassis added to the chassis list. Peterbilt: Dealers should check the chassis list and SIR weekly for VIN changes. 10 chassis added to the chassis list."
Information only: Some model 320 and 520 vehicles built before 3/11/2019 may experience loss or loosening of doghouse insulation.
Read full bulletin
Reference the procedure in the attachment section to properly remove and replace the insulation.
Fix-As-Fail: Two separate causes have been identified as root cause of intermittent low coolant indicator illumination.
Body & Paint
2 bulletinsInformation Only Windshield washer pumps have a high No Trouble Found rate.
Read full bulletin
Washer pumps may fail to spray due to a clogged filter.
Information Only: Proper instructions for closure of power distribution box cover to prevent corrosion.
Pre-Delivery & Maintenance
2 bulletinsInformation only: Hendrickson Softek front axle maintenance intervals and requirements.
Information Only This bulletin provides information about the California Air Resources Board (CARB) Periodic Smoke...
Read full bulletin
Inspection Program (PSIP) and Heavy Duty Vehicle Inspection Program (HDVIP).
HVAC & Climate
1 bulletinInformation Only: This bulletin provides guidance for repairing an air-conditioning system after internal failure of the...
Read full bulletin
A/C compressor.
Brakes
1 bulletinSafety Recall: Vehicles fail to confirm with FMVSS/CMVSS No 108 Table 1-a requirements which requires 2 red stop lamps.
Read full bulletin
Vehicles were equipped with additional amber stop lamps which may illuminate when the brake is applied, and may confuse other drivers. Resolution is to remove the amber stop lamps and associated wiring.
Suspension
1 bulletinFix-As-Fail ? There is an updated plug to fix leaking steer axle hubcaps.