2019 Mitsubishi Outlander Sport TSBs

check engine light illuminates with DTC of P0401/ P0400.

diagnosis, to replace the ignition coils of all cylinders with countermeasure parts when customers report a MIL illumination and a loss of engine power due to the vehicle being in fail safe mode. Unstable idling due to poor contact of the ignition coil terminal and DTC P030X may create this concern.

system for affected vehicles.

complains that the engine will not start while using the remote start system.

replace the ignition coils of all cylinders with countermeasure parts when customers report a MIL illumination and a loss of engine power due to the vehicle being in fail safe mode. Unstable idling due to poor contact of the ignition coil terminal and DTC P030X may create this concern.

replace the ignition coils of all cylinders with countermeasure parts when customers report a MIL illumination and a loss of engine power due to the vehicle being in fail safe mode. Unstable idling due to poor contact of the ignition coil terminal and DTC P030X may create this concern.

affected vehicles with improved countermeasure parts. Due to a change in the reclining motor, the new longer harness and connector are necessary.

affected vehicles with improved countermeasure parts. Due to a change in the reclining motor, the new longer harness and connector are necessary.

of absorbers unnecessarily when trace amounts of oil are noted to have adhered to the shock absorber.

to a customer concern of oil leaking.

communication error that may occur between the One-Touch Start System (OSS) and Engine Control Unit (ECU) or the Keyless Operating System (KOS) and Engine Control Unit (ECU).

Exhaust Manifold and instructs dealers to replace the Heat Protector Assembly with a new part.

found at the hose connection and to replace the old hose clamp with a countermeasure clamp and to replace the old water hose with a new water hose.

found at the hose connection and to replace the old hose clamp with a countermeasure clamp and to replace the old water hose with a new water hose.

and MY 2020-2018 Outlander Sports with 2.4L engines.

It covers various topics and reviews the previous months publications.

It covers various topics and reviews the previous months publications.

residue.

capacity be affixed to vehicles when the total net weight of accessories is more than 1.5 percent of the vehicle's gross vehicle weight rating (GVWR) or 100 lbs.

It covers various topics and reviews the previous months publications.

exhibiting a shudder or surge condition possibly caused by poor reaction of the hydraulic pressure circuit.

exhibiting a shudder or surge condition possibly caused by poor reaction of the hydraulic pressure circuit.

affected vehicles with improved countermeasure parts.

Circuits may appear and dealers should check for damage to the drivers seat slide position sensor harness.

These changes are being made to correct the Left, Right, and Center Reflection Amplitudes within the table.

These changes are being made to correct the Left, Right, and Center Reflection Amplitudes within the table.

disassembly procedure of the front seat assembly with these additional parts: Seat heater harness, Front seat hinge protector, and Slide sensor harness.

to install the oil seal within the Automatic Transaxle sections of the applicable Service Manuals.

on-vehicle service for belt & pulley assembly on certain CVT models.

(Service Manual Revision)

F1CJC/W1CJC (CVT-8) transmissions that may exhibit a shudder or surge condition possibly caused by a poor reaction of the hydraulic pressure circuit.

reaction of the hydraulic pressure circuit. With continued driving under these conditions, the CVT belt may slip repeatedly when accelerating, and abrasion powder may enter the hydraulic pressure circuit, causing a warning light to turn on. This TSB instructs dealers to diagnose and test drive vehicles exhibiting this condition. *This TSB may also apply to later model years with F1CJC/W1CJC (CVT-8) transmissions.

Windshield Wiper in the Exterior portion of the affected Service Manuals.

a natural phenomenon, and water penetration caused by improper sealing or a defective/broken part.

Use the 2018 Body Repair Manual (MSSP-427B-2018) along with this TSB for complete body repair information on the 2019 Outlander PHEV.

windshield Removal and Installation procedure for vehicles equipped with Forward Collision Mitigation System (FCM), Lane Departure Warning System (LDW), and Automatic High Beam System (AHB).

for the tailgate latch, and to distinguish the different torques for the 2 types of bolts for 2019 model year vehicles.

manuals.

technician quiz for 2023.

technician quiz for 2023.

beginning with Model Year 2015.

Required Condition & Pre-Approval Center (PRC) for a vehicle pulling/drifting and/or with steering wheel off-center concerns.

alignment check and adjustment on an affected vehicle with a customer concern of pulling/drifting and/or steering wheel off-center concerns.

a wheel alignment check and adjustment on an affected vehicle with a customer concern of pulling/drifting and/or steering wheel off-center concerns.

Fail Safe Mode") issued August 2023, to update the Affected Vehicle years and provide VIN cut-off information.

TSB-17-52A-003, to add Outlander PHEV and additional model years for Outlander and Outlander Sport, and to update parts and procedures to help resolve the power seat movement.

issued January 2019, to update symptoms in the Purpose section, and to remove Outlander PHEV from the Affected Vehicles.

the Service Brakes portion of the affected Service Manuals.

when customers report a condition where an abnormal rubbing noise is heard from the Seat Back when a driver and/or passenger is seated in the front seat(s).

rear end portion of the seat cushion by a passenger, the cushion may sink down and rub against the edges of the metal seat frame. This in turn may cause the damaged urethane material to turn to powder and fall on the floor carpet. This TSB provides a repair procedure to replace the damaged seat cushion pad, and apply tape on the frame to help prevent future damage.

when customers report a condition in vehicles equipped with a front wheel arch molding displays a gap between the front wheel arch molding and the fender.

speakers in Mitsubishi vehicles equipped with original equipment audio components.

tongue not staying in place or that slides down to the floor, always default to searching for applicable TSBs, Tech Talk articles, and TINs first.

Supplemental Restraint System (SRS) section of the affected Service Manuals, to correct the front pillar trim assembly installation procedure.

(Service Manual Revision)