2017 Mitsubishi Lancer TSBs

It covers various topics and reviews the previous months publications.

residue.

capacity be affixed to vehicles when the total net weight of accessories is more than 1.5 percent of the vehicle's gross vehicle weight rating (GVWR) or 100 lbs.

It covers various topics and reviews the previous months publications.

has resumed for dealerships and customer facilities.

system for affected vehicles.

complains that the engine will not start while using the remote start system.

quantity of mounting bolts for vehicles equipped with 4B1 series engine. (Service Manual Revision)

to a customer concern of oil leaking.

found at the hose connection and to replace the old hose clamp with a countermeasure clamp and to replace the old water hose with a new water hose.

found at the hose connection and to replace the old hose clamp with a countermeasure clamp and to replace the old water hose with a new water hose.

and MY 2020-2018 Outlander Sports with 2.4L engines.

The bulletin instructs dealers to confirm a list of specific Diagnostic Trouble Codes (DTCs) if vehicle experiences the following symptoms in cold weather: the check engine light illuminating with a limited vehicle speed (failsafe mode), or the engine does not restart after driving a short distance and stopping the engine for a few minutes. Once symptoms and DTCs are confirmed, dealers should replace the following relays with anti- freezing types: ETV, A/T (CVT), injector, and starter. This bulletin supersedes TSB-18-13-003, issued December, 2018, to add Eclipse Cross, applicable Canadian models, and countermeasure dates.

The bulletin instructs dealers to confirm a list of specific Diagnostic Trouble Codes (DTCs) if vehicle experiences the following symptoms in cold weather: the check engine light illuminating with a limited vehicle speed (failsafe mode), or the engine does not restart after driving a short distance and stopping the engine for a few minutes. Once symptoms and DTCs are confirmed, dealers should replace the following relays with anti- freezing types: ETV, A/T (CVT), injector, and starter. This bulletin supersedes TSB-18-13-003, issued December, 2018, to add Eclipse Cross, applicable Canadian models, and countermeasure dates.

The bulletin updates the Engine Electrical section of the affected Service Manuals to correct the tightening torque for the generator assembly removal and installation.

The bulletin instructs dealers to confirm a list of specific Diagnostic Trouble Codes (DTCs) if vehicle experiences the following symptoms in cold weather: the check engine light illuminating with a limited vehicle speed (failsafe mode), or the engine does not restart after driving a short distance and stopping the engine for a few minutes. Once symptoms and DTCs are confirmed, dealers should replace the following relays with anti- freezing types: ETV, A/T (CVT), injector, and starter.

to install the oil seal within the Automatic Transaxle sections of the applicable Service Manuals.

on-vehicle service for belt & pulley assembly on certain CVT models.

(Service Manual Revision)

F1CJC/W1CJC (CVT-8) transmissions that may exhibit a shudder or surge condition possibly caused by a poor reaction of the hydraulic pressure circuit.

reaction of the hydraulic pressure circuit. With continued driving under these conditions, the CVT belt may slip repeatedly when accelerating, and abrasion powder may enter the hydraulic pressure circuit, causing a warning light to turn on. This TSB instructs dealers to diagnose and test drive vehicles exhibiting this condition. *This TSB may also apply to later model years with F1CJC/W1CJC (CVT-8) transmissions.

This bulletin updates the Rear Axle section of the affected Service Manuals, to correct the quantity of rear differential gear oil used.

This bulletin updates the Automatic Transaxle section of the affected Service Manuals, to correct the torque converter pressure in the standard hydraulic pressure table.

The bulletin updates the Power Steering section of the affected Service Manuals to correct the tightening torque for the power steering gear box, power steering control unit (EPS-ECU), steering shaft, power steering oil pump assembly and the power steering hoses.

Variable Transmission.

exhibiting a shudder or surge condition possibly caused by poor reaction of the hydraulic pressure circuit.

exhibiting a shudder or surge condition possibly caused by poor reaction of the hydraulic pressure circuit.

Side Airbag Replacement Procedure. These changes are being made because the Side Airbag Module is now available as a single unit.

This bulletin provides dealers with a basic description of the hands-free systems used in Mitsubishi built vehicles. The bulletin covers components and operation, system layouts showing the differences in Japan built and U.S. built vehicles, diagnostic flow charts, a list of commonly used acronyms and terms, and part numbers. The bulletin also provides a comprehensive Hands-free/FUSE Information Sheet to guide the service writer in getting complete and accurate details from the customer. With this information, dealer personnel can answer questions and conduct an efficient diagnosis to resolve customer concerns as quickly as possible.

This bulletin provides dealers with a basic description of the hands-free systems used in Mitsubishi built vehicles. The bulletin covers components and operation, system layouts showing the differences in Japan built and U.S. built vehicles, diagnostic flow charts, a list of commonly used acronyms and terms, and part numbers. The bulletin also provides a comprehensive Hands-free/FUSE Information Sheet to guide the service writer in getting complete and accurate details from the customer. With this information, dealer personnel can answer questions and conduct an efficient diagnosis to resolve customer concerns as quickly as possible.

This bulletin updates the Chassis Electrical section of the affected Service Manuals to update diagnostics for ETACS-ECU CAN timeout diagnostics with DTC U0141.

This bulletin updates the Supplemental Restraint System (SRS) section of the affected Service Manuals to update diagnostics for ETACS-ECU CAN timeout diagnostics with DTC U0141.

This bulletin updates the Body section of the affected Service Manuals to update diagnostics for ETACS-ECU CAN timeout with DTC U0141.

It provides dealers instructions for reprogramming the ETACS ECU with updated software to resolve the issue on certain vehicles experiencing dome light flickering when the vehicle's doors are opened or dome light is switched to "ON."

This bulletin supersedes TSB-18-00-003, issued April, 2018, to add updated information for Carrying Capacity Reduced Label.

This bulletin updates the Propeller Shaft section of the affect Service Manuals, to correct the propeller shaft assembly removal procedure.

This bulletin updates the General section of the affected Service Manual, to add new model codes to vehicle information.

This bulletin updates the Propeller Shaft section of the affect Service Manuals, to correct the propeller shaft assembly removal procedure.

This bulletin updates the General section of the affected Service Manual, to add new model codes to vehicle information.

The bulletin updates the Interior section of the affected Service Manuals to correct the tightening torque for the floor console assembly.

It informs dealers that some customers may have experienced a rear view camera freezing issue while backing up. Mobis has released a fix for this issue. Dealers are to update the DAS unit on a customer complaint basis.

a natural phenomenon, and water penetration caused by improper sealing or a defective/broken part.

manuals.

This bulletin updates the Body Color section of the affected Body Repair Manual, to add body color information for 2017 models.

This bulletin updates the Body Color section of the affected Body Repair Manual, to add body color information for 2017 models.

This bulletin instructs dealers how to re-register vehicle keys for affected vehicles. Affected vehicles may experience a condition of the door(s) inability to be locked or unlocked using the Remote Keyless Entry (RKE) function. Dealers are instructed to re- register the ley using "Customer Key Programming" procedure in the Owner's Manual. This bulletin also provides Summary Table for Function Customization & Key Programming.

The bulletin updates the Exterior section of the affected Service Manuals to correct the tightening torque for the front bumper assembly and radiator grille, under cover and floor console assembly.

speakers in Mitsubishi vehicles equipped with original equipment audio components.

It provides dealers instructions for resolving customer's report that Bluetooth pairing code given by the Hands Free Link system does not work for certain smartphone models, namely, Samsung Galaxy and Sony Xperia. For these smartphone models, the pairing code for Bluetooth connection must be set to a fixed code of ?0000.? This TSB instructs dealers how to register these smartphones using the pairing code ?0000.?

w/Smartphone Link unit if the customer complains of a rear view camera freezing issue while backing up. Steps are provided to help complete the update. This notice is a revision of TIN-18-54-003, to clarify the affected audio system, and to add details about using the Mobis CSM System website (dealer login and file download).

TIN-17-54-002 (unresponsive audio system buttons after making a phone call using an iPhone with iOS 11.0 or 11.0.1 and Apple CarPlay?) have now been resolved with iOS 11.1, released by Apple on November 1, 2017.

equipped with Display Audio with Smartphone Link and connected to iPhones that have updated to the recently-released iOS 11.0 or 11.0.1. Vehicles equipped with Display Audio with Smartphone Link and connected to iPhones with iOS 11.0 or 11.0.1, after making a phone call, can lose certain audio system functions.

correct audio unit.

technician quiz for 2023.

technician quiz for 2023.

beginning with Model Year 2015.

Procedures, both technical and detail, for 2017 model year Mitsubishi vehicles (exc. i-MiEV and Outlander PHEV) If required, additional Technical Service Bulletins will be issued for model - specific PDI Procedures.

I-MIEV AND OUTLANDER PHEV).

Customers may report the front seat belt fraying as a result of being caught under the seat reclining adjusting lever. This TSB instructs dealers how to replace the front seat belt and reclining adjusting lever (driver and/or passenger side) with a countermeasure part, to prevent fraying of the seat belt should it get caught under the lever, on affected vehicles.