2019 Mitsubishi Eclipse Cross TSBs

conditioner, ventilation vents) when the blower motor is turned on.

diagnosis, to replace the ignition coils of all cylinders with countermeasure parts when customers report a MIL illumination and a loss of engine power due to the vehicle being in fail safe mode. Unstable idling due to poor contact of the ignition coil terminal and DTC P030X may create this concern.

vents) when the blower motor is turned on.

replacement and instructions were provided regarding warranty claim submission.

of the 2018-22 Eclipse Cross Service Manual.

replace the ignition coils of all cylinders with countermeasure parts when customers report a MIL illumination and a loss of engine power due to the vehicle being in fail safe mode. Unstable idling due to poor contact of the ignition coil terminal and DTC P030X may create this concern.

replace the ignition coils of all cylinders with countermeasure parts when customers report a MIL illumination and a loss of engine power due to the vehicle being in fail safe mode. Unstable idling due to poor contact of the ignition coil terminal and DTC P030X may create this concern.

pertaining to DTC P0010 - P0017.

of absorbers unnecessarily when trace amounts of oil are noted to have adhered to the shock absorber.

countermeasure software to correct issues that may cause No Start or create DTC Codes that causes the check engine light to illuminate for any affected vehicles that come in for service or dealer inventory.

software to correct the issue for any affected vehicles that come in for service (with customer approval) and any in dealer inventory related to the starter no engaging or DTC Code P0014.

Exhaust Manifold and instructs dealers to replace the Heat Protector Assembly with a new part.

found at the hose connection and to replace the old hose clamp with a countermeasure clamp and to replace the old water hose with a new water hose.

found at the hose connection and to replace the old hose clamp with a countermeasure clamp and to replace the old water hose with a new water hose.

- July 2020

and MY 2020-2018 Outlander Sports with 2.4L engines.

when the engine is ON and recirculation mode is OFF. This may be caused by some fuel residue in the inside wall of the breather hose permeating through the outside of the hose. This TSB instructs dealers to replace the breather hose and the vacuum pipe and hose assembly.

The bulletin instructs dealers to confirm a list of specific Diagnostic Trouble Codes (DTCs) if vehicle experiences the following symptoms in cold weather: the check engine light illuminating with a limited vehicle speed (failsafe mode), or the engine does not restart after driving a short distance and stopping the engine for a few minutes. Once symptoms and DTCs are confirmed, dealers should replace the following relays with anti- freezing types: ETV, A/T (CVT), injector, and starter. This bulletin supersedes TSB-18-13-003, issued December, 2018, to add Eclipse Cross, applicable Canadian models, and countermeasure dates.

The bulletin instructs dealers to confirm a list of specific Diagnostic Trouble Codes (DTCs) if vehicle experiences the following symptoms in cold weather: the check engine light illuminating with a limited vehicle speed (failsafe mode), or the engine does not restart after driving a short distance and stopping the engine for a few minutes. Once symptoms and DTCs are confirmed, dealers should replace the following relays with anti- freezing types: ETV, A/T (CVT), injector, and starter. This bulletin supersedes TSB-18-13-003, issued December, 2018, to add Eclipse Cross, applicable Canadian models, and countermeasure dates.

The bulletin instructs dealers to reprogram the Engine ECU with updated software to correct an issue when affected vehicle's engine stalling in cold weather conditions. If the vehicle's gas tank is filled with winter blend fuel, the issue may occur after a cold engine start, turning the key off, restarting the engine, shifting to D (Drive) range then tapping acceleration pedal. This issue may be due to inappropriate fuel correction data after engine restart, where the Air/Fuel (a/F) ratio becomes rich.

This notice instructs dealers on how to address concerns when an affected vehicle experiences a lack of throttle response at initial start-up with the CEL (Check Engine Light) illuminated in extremely cold temperatures. It is recommended that the dealers replaces the TAC relay (8627A049) in order to address this concern.

The notice informs dealers that two questionnaire forms have been made available on Mitsubishi Dealer Link (MDL). The questionnaires are to identify how two frequent repairs (loss of Key Fob registration and tire/wheel imbalance) are happening. Mitsubishi Motors North America (MMNA) is requesting dealers to complete the appropriate questionnaire during the customer interview process.

This bulletin supersedes TSB-18-13-002, issued June, 2018. The bulletin informs dealers that updated software was release to reprogram the engine Electronic Control Unit (ECU) for certain affect vehicles. The bulletin also revises the model year, production date of affected vehicles, software, data and warranty information.

It covers various topics and reviews the previous months publications.

It covers various topics and reviews the previous months publications.

cooling fan shroud.

residue.

capacity be affixed to vehicles when the total net weight of accessories is more than 1.5 percent of the vehicle's gross vehicle weight rating (GVWR) or 100 lbs.

should a vehicle's driver seat gradually and unintentionally move down.

is required for warranty approval for all P0010 P0017 codes.

It covers various topics and reviews the previous months publications.

This bulletin provides dealers some suggestions on how to successfully register a customer's smartphone to a vehicle with the Mitsubishi Connect system.

This bulletin provides dealers some suggestions on how to successfully register a customer's smartphone to a vehicle with the Mitsubishi Connect system.

This bulletin contains important new model service information and features for the 2019 Eclipse Cross.

maintenance procedure in the applicable Service Manual sections.

maintenance procedure in the applicable service manuals.

assembly/reassembly in the applicable service manuals.

installation in the applicable service manuals.

(Service Manual Revision)

Windshield Wiper in the Exterior portion of the affected Service Manuals.

the Body section of the Technical Information Manual and is part of the affected Service Manual.

a natural phenomenon, and water penetration caused by improper sealing or a defective/broken part.

Side Window Switch becomes inoperable during certain conditions when using the one touch function to open/close the window to replace the switch with a new countermeasure part.

Side Window Switch becomes inoperable during certain conditions when using the one touch function to open/close the window to replace the switch with a new countermeasure part.

Manual, Door, Door Handle and Latch Removal and Installation.

manuals.

TSB-19-42A-002, to add 2020 model year, and provide additional examples of cases where the power window switch may become inoperative.

This bulletin instructs dealers how to repair a vehicle when the power window auto open/close function becomes inoperative after the power window switch is repeatedly operated "ON-OFF" in a short time span.

This bulletin instructs dealers how to repair a vehicle when the power window auto open/close function becomes inoperative after the power window switch is repeatedly operated "ON-OFF" in a short time span.

This bulletin instructs dealers how to re-register vehicle keys for affected vehicles. Affected vehicles may experience a condition of the door(s) inability to be locked or unlocked using the Remote Keyless Entry (RKE) function. Dealers are instructed to re- register the ley using "Customer Key Programming" procedure in the Owner's Manual. This bulletin also provides Summary Table for Function Customization & Key Programming.

exhibiting a shudder or surge condition possibly caused by poor reaction of the hydraulic pressure circuit.

exhibiting a shudder or surge condition possibly caused by poor reaction of the hydraulic pressure circuit.

Conditioning and Ventilation sections of the Service Manual.

(BSW).

(Service Manual Revision)

box and securing the door in a closed position due to the locking mechanism may not properly latch when pushing the glove box door closed from the front.

of low heater output temperatures while idling or during low vehicles speeds.

These changes are being made to correct the Left, Right, and Center Reflection Amplitudes within the table.

These changes are being made to correct the Left, Right, and Center Reflection Amplitudes within the table.

This bulletin instructs dealers to reprogram the Electronic Power Steering ECU (EPS-ECU) with updated software to correct a coding issue. This coding issue may occur due to the supplier improperly programming the EPS-ECU.

The bulletin instructs dealers on how repair a condition when the door and window lock switches on the driver's door stick and do not return to the neutral position. Dealers are to modify the taping of the branch harness to reduce stiffness and allowing more flexibility, reducing the risk of the buttons contacting the panel and sticking.

technician quiz for 2023.

technician quiz for 2023.

Mitsubishi vehicles equipped with the Mitsubishi Connect/Telematics system.

beginning with Model Year 2015.

separation of the adhesive portion of Accessory Install Parts from the vehicle.

Woofer Kit and applying epoxy-resin structural adhesive in specified locations.

These instructions provide dealers with a breather hose, vacuum pipe and hose assembly removal and installation procedure.

to install the oil seal within the Automatic Transaxle sections of the applicable Service Manuals.

on-vehicle service for belt & pulley assembly on certain CVT models.

(Service Manual Revision)

(Service Manual Revision)

F1CJC/W1CJC (CVT-8) transmissions that may exhibit a shudder or surge condition possibly caused by a poor reaction of the hydraulic pressure circuit.

reaction of the hydraulic pressure circuit. With continued driving under these conditions, the CVT belt may slip repeatedly when accelerating, and abrasion powder may enter the hydraulic pressure circuit, causing a warning light to turn on. This TSB instructs dealers to diagnose and test drive vehicles exhibiting this condition. *This TSB may also apply to later model years with F1CJC/W1CJC (CVT-8) transmissions.

the Service Brakes portion of the affected Service Manuals.

Manuals.

difference in contours.

difference in contours.

Brake Auto Hold Switch for vehicles with electric parking brake.

Required Condition & Pre-Approval Center (PRC) for a vehicle pulling/drifting and/or with steering wheel off-center concerns.

alignment check and adjustment on an affected vehicle with a customer concern of pulling/drifting and/or steering wheel off-center concerns.

a wheel alignment check and adjustment on an affected vehicle with a customer concern of pulling/drifting and/or steering wheel off-center concerns.

photographs when performing a wheel alignment check and adjustment on an affected vehicle with a customer concern of pulling/drifting and/or steering wheel off-center concerns (while under warranty). This Notice supersedes TIN-17-37-001 released in July, 2017, to expand affected models and model years.

(Service Manual Revision)

Service Manual.

This bulletin updates the Front Suspension section of the affected Service Manuals, to correct the toe-in value for the front wheel alignment check and adjustment procedure.

function does not respond on the Apple CarPlay screen. This concern may be independent to the iPhone. Because this concern is within the IOS developed by Apple, customers may have to wait for an update that may potentially address this issue. Currently, Apple has not announced a schedule for future updates.

speakers in Mitsubishi vehicles equipped with original equipment audio components.

This bulletin instructs dealers to reprogram the Combination Meter with updated software to correct a issue affected vehicles are experiencing with the position display.

installation procedure.

Manuals.

This bulletin instructs dealers to reprogram the Combination Meter with updated software to correct an inaccurate fuel level on the Fuel Remaining Display Screen. This issue occurs when the affected vehicle is stopped on a slope.

This bulletin supersedes TSB-18-00-003, issued April, 2018, to add updated information for Carrying Capacity Reduced Label.

This bulletin updates the General section of the affected Service Manuals, to add model codes to the vehicle information.

Fail Safe Mode") issued August 2023, to update the Affected Vehicle years and provide VIN cut-off information.