2018 Mitsubishi Eclipse Cross TSBs

conditioner, ventilation vents) when the blower motor is turned on.

vents) when the blower motor is turned on.

replacement and instructions were provided regarding warranty claim submission.

of the 2018-22 Eclipse Cross Service Manual.

pertaining to DTC P0010 - P0017.

of absorbers unnecessarily when trace amounts of oil are noted to have adhered to the shock absorber.

countermeasure software to correct issues that may cause No Start or create DTC Codes that causes the check engine light to illuminate for any affected vehicles that come in for service or dealer inventory.

software to correct the issue for any affected vehicles that come in for service (with customer approval) and any in dealer inventory related to the starter no engaging or DTC Code P0014.

Exhaust Manifold and instructs dealers to replace the Heat Protector Assembly with a new part.

found at the hose connection and to replace the old hose clamp with a countermeasure clamp and to replace the old water hose with a new water hose.

found at the hose connection and to replace the old hose clamp with a countermeasure clamp and to replace the old water hose with a new water hose.

- July 2020

and MY 2020-2018 Outlander Sports with 2.4L engines.

when the engine is ON and recirculation mode is OFF. This may be caused by some fuel residue in the inside wall of the breather hose permeating through the outside of the hose. This TSB instructs dealers to replace the breather hose and the vacuum pipe and hose assembly.

The bulletin instructs dealers to confirm a list of specific Diagnostic Trouble Codes (DTCs) if vehicle experiences the following symptoms in cold weather: the check engine light illuminating with a limited vehicle speed (failsafe mode), or the engine does not restart after driving a short distance and stopping the engine for a few minutes. Once symptoms and DTCs are confirmed, dealers should replace the following relays with anti- freezing types: ETV, A/T (CVT), injector, and starter. This bulletin supersedes TSB-18-13-003, issued December, 2018, to add Eclipse Cross, applicable Canadian models, and countermeasure dates.

The bulletin instructs dealers to confirm a list of specific Diagnostic Trouble Codes (DTCs) if vehicle experiences the following symptoms in cold weather: the check engine light illuminating with a limited vehicle speed (failsafe mode), or the engine does not restart after driving a short distance and stopping the engine for a few minutes. Once symptoms and DTCs are confirmed, dealers should replace the following relays with anti- freezing types: ETV, A/T (CVT), injector, and starter. This bulletin supersedes TSB-18-13-003, issued December, 2018, to add Eclipse Cross, applicable Canadian models, and countermeasure dates.

The bulletin instructs dealers to reprogram the Engine ECU with updated software to correct an issue when affected vehicle's engine stalling in cold weather conditions. If the vehicle's gas tank is filled with winter blend fuel, the issue may occur after a cold engine start, turning the key off, restarting the engine, shifting to D (Drive) range then tapping acceleration pedal. This issue may be due to inappropriate fuel correction data after engine restart, where the Air/Fuel (a/F) ratio becomes rich.

The bulletin updates the Engine Overhaul section of the affected Service Manuals to revise the Injector (High Pressure) removal and installation procedure.

This notice instructs dealers on how to address concerns when an affected vehicle experiences a lack of throttle response at initial start-up with the CEL (Check Engine Light) illuminated in extremely cold temperatures. It is recommended that the dealers replaces the TAC relay (8627A049) in order to address this concern.

The notice informs dealers that two questionnaire forms have been made available on Mitsubishi Dealer Link (MDL). The questionnaires are to identify how two frequent repairs (loss of Key Fob registration and tire/wheel imbalance) are happening. Mitsubishi Motors North America (MMNA) is requesting dealers to complete the appropriate questionnaire during the customer interview process.

This bulletin supersedes TSB-18-13-002, issued June, 2018. The bulletin informs dealers that updated software was release to reprogram the engine Electronic Control Unit (ECU) for certain affect vehicles. The bulletin also revises the model year, production date of affected vehicles, software, data and warranty information.

It informs dealers that a new Engine ECU software update (Software Part Number 1860D11603) was made available on June 7, 2018 that addresses both MFI Diagnostic Trouble Codes (DTCs) P0068 and P061A. Dealers are to perform the Engine ECU reprogramming procedure outlined in TSB-18-13-001 and TSB-18-13-002, on any new or used affected vehicles in the inventory or that visit the dealership service department. Dealers are recommended to reprogram the Engine ECU when an affected vehicle is brought in to have SR-18-007 (FCM-ECU Reprogramming) and/or SR-18-008 (ASC Hydraulic Unit ECU Reprogramming) completed.

It instructs dealers to reprogram the engine ECU with updated software to correct the issue, on certain vehicles, of MIL illumination with DTC P061A. During turbocharged driving, DTC P061A (Torque Monitoring) may set when the current monitor does not recognize turbocharged operation. When DTC P061A is detected, the vehicle goes into fail-safe mode and vehicle speed is restricted to a maximum of 25 mph (40 km/h). Depending on vehicle and/or driving conditions, DTC P1574, C1707, C121C, C1777, or C2339 may also be detected. The new ECU software optimizes the Torque Monitoring to be able to recognize turbocharged operation.

It instructs dealers to reprogram the engine ECU with updated software to correct the issue, on certain vehicles, of MIL illumination with DTC P0068, and vehicle speed is restricted to a maximum of 62 mph (100 km/h). During turbocharged operation, DTC P0068 may set when Mass Airflow Sensor Plausibility Monitoring does not recognize turbocharged operation. The new ECU software optimizes this monitoring to be able to recognize turbocharged operation.

DTCs P0068 and P061A that have been improperly set. Dealers are asked to check the software part number as described in TSB-18-13-001 and TSB 18-13-002 when reprogramming the Engine ECU.

and One Touch Start System (OSS) during a PDI or anytime the IOD fuse is disengaged.

It covers various topics and reviews the previous months publications.

It covers various topics and reviews the previous months publications.

cooling fan shroud.

residue.

capacity be affixed to vehicles when the total net weight of accessories is more than 1.5 percent of the vehicle's gross vehicle weight rating (GVWR) or 100 lbs.

should a vehicle's driver seat gradually and unintentionally move down.

is required for warranty approval for all P0010 P0017 codes.

It covers various topics and reviews the previous months publications.

This bulletin provides dealers some suggestions on how to successfully register a customer's smartphone to a vehicle with the Mitsubishi Connect system.

This bulletin provides dealers some suggestions on how to successfully register a customer's smartphone to a vehicle with the Mitsubishi Connect system.

This bulletin contains important new model service information and features for the 2018 Eclipse Cross.

maintenance procedure in the applicable Service Manual sections.

maintenance procedure in the applicable service manuals.

assembly/reassembly in the applicable service manuals.

installation in the applicable service manuals.

(Service Manual Revision)

Windshield Wiper in the Exterior portion of the affected Service Manuals.

the Body section of the Technical Information Manual and is part of the affected Service Manual.

a natural phenomenon, and water penetration caused by improper sealing or a defective/broken part.

Manual, Door, Door Handle and Latch Removal and Installation.

condition in which abnormal noises, such as chattering or rattled, may be heard while driving with the front window slightly opened. The window shakes while driving, and the glass touches a protrusion on the inner wall of the front door channel causing abnormal noises.

manuals.

This bulletin instructs dealers how to re-register vehicle keys for affected vehicles. Affected vehicles may experience a condition of the door(s) inability to be locked or unlocked using the Remote Keyless Entry (RKE) function. Dealers are instructed to re- register the ley using "Customer Key Programming" procedure in the Owner's Manual. This bulletin also provides Summary Table for Function Customization & Key Programming.

The bulletin updates the Body section of the affected Service Manuals to add the type of the hood latch mounting bolt and to correct the tightening torque for the hood.

onto each black wheel lug and lock after it has been properly torqued to specification. Dealers must immediately clean off all white paint marks using a wash cloth when taking receipt of the vehicles.

exhibiting a shudder or surge condition possibly caused by poor reaction of the hydraulic pressure circuit.

exhibiting a shudder or surge condition possibly caused by poor reaction of the hydraulic pressure circuit.

Conditioning and Ventilation sections of the Service Manual.

(BSW).

(Service Manual Revision)

box and securing the door in a closed position due to the locking mechanism may not properly latch when pushing the glove box door closed from the front.

of low heater output temperatures while idling or during low vehicles speeds.

is set to auto; but, may turn on despite surrounding brightness.

These changes are being made to correct the Left, Right, and Center Reflection Amplitudes within the table.

These changes are being made to correct the Left, Right, and Center Reflection Amplitudes within the table.

This bulletin instructs dealers to reprogram the Electronic Power Steering ECU (EPS-ECU) with updated software to correct a coding issue. This coding issue may occur due to the supplier improperly programming the EPS-ECU.

The bulletin instructs dealers on how repair a condition when the door and window lock switches on the driver's door stick and do not return to the neutral position. Dealers are to modify the taping of the branch harness to reduce stiffness and allowing more flexibility, reducing the risk of the buttons contacting the panel and sticking.

technician quiz for 2023.

technician quiz for 2023.

beginning with Model Year 2015.

separation of the adhesive portion of Accessory Install Parts from the vehicle.

Woofer Kit and applying epoxy-resin structural adhesive in specified locations.

These instructions provide dealers with a breather hose, vacuum pipe and hose assembly removal and installation procedure.

system functions.

This notice instructs dealers on how the vehicle icon in the bird's-eye view of the Multi Around Monitor can be changed to match the individual vehicle.

This notice informs dealers of important launch activities.

year MMNA vehicles.

to install the oil seal within the Automatic Transaxle sections of the applicable Service Manuals.

on-vehicle service for belt & pulley assembly on certain CVT models.

(Service Manual Revision)

(Service Manual Revision)

F1CJC/W1CJC (CVT-8) transmissions that may exhibit a shudder or surge condition possibly caused by a poor reaction of the hydraulic pressure circuit.

reaction of the hydraulic pressure circuit. With continued driving under these conditions, the CVT belt may slip repeatedly when accelerating, and abrasion powder may enter the hydraulic pressure circuit, causing a warning light to turn on. This TSB instructs dealers to diagnose and test drive vehicles exhibiting this condition. *This TSB may also apply to later model years with F1CJC/W1CJC (CVT-8) transmissions.

The bulletin updates the Interior section of the affected Service Manual, to include additional cautions to the shift lever panel removal and installation procedure.

the Service Brakes portion of the affected Service Manuals.

Manuals.

difference in contours.

difference in contours.

Brake Auto Hold Switch for vehicles with electric parking brake.

The bulletin updates the Parking Brake section of the affected Service Manual, to include additional cautions to the parking brake lever stroke adjustment, and removal and installation procedures.

several issues.

instructions.

function does not respond on the Apple CarPlay screen. This concern may be independent to the iPhone. Because this concern is within the IOS developed by Apple, customers may have to wait for an update that may potentially address this issue. Currently, Apple has not announced a schedule for future updates.

speakers in Mitsubishi vehicles equipped with original equipment audio components.

This bulletin instructs dealers to reprogram the Combination Meter with updated software to correct a issue affected vehicles are experiencing with the position display.

Manuals.

this bulletin instructs dealers to use a software update that is now available, for the Smartphone Link Display Audio built by JVC Kenwood. The update resolves several issues, including: audio-related concerns, language translation error on the display in French, MPG (miles per gallon) displayed on screen instead of "fuel consumption," and EV charge cost history is occasionally erased when power switch is turned On or Off. This bulletin supersedes TSB-18-54-004, issued June, 2018 to add additional affected vehicles and to restate the importance of updating each vehicle with the correct vehicle specific software file.

This bulletin instructs dealers to reprogram the Combination Meter with updated software to correct an inaccurate fuel level on the Fuel Remaining Display Screen. This issue occurs when the affected vehicle is stopped on a slope.

The bulletin updates the Direct Fuel Injector and Multiport Fuel Injection (DFI and MFI) section of the affected Service Manuals to correct the Fuel Rail and Fuel Injector (High Pressure) removal and installation procedure.

It informs dealers that a software update is available, and instructions for performing the software update, for the Smartphone Link Display Audio built by JVC Kenwood. This update resolves several issues that may occur in various models. These issues include audio-related concerns, language translation error on the display in French, MPG (miles per gallon) displayed on screen instead of ?fuel consumption,? and EV charge cost history is occasionally erased when power switch is turned On or Off.

Required Condition & Pre-Approval Center (PRC) for a vehicle pulling/drifting and/or with steering wheel off-center concerns.

alignment check and adjustment on an affected vehicle with a customer concern of pulling/drifting and/or steering wheel off-center concerns.

a wheel alignment check and adjustment on an affected vehicle with a customer concern of pulling/drifting and/or steering wheel off-center concerns.

photographs when performing a wheel alignment check and adjustment on an affected vehicle with a customer concern of pulling/drifting and/or steering wheel off-center concerns (while under warranty). This Notice supersedes TIN-17-37-001 released in July, 2017, to expand affected models and model years.

(Service Manual Revision)

Service Manual.

This bulletin updates the Front Suspension section of the affected Service Manuals, to correct the toe-in value for the front wheel alignment check and adjustment procedure.

This bulletin supersedes TSB-18-00-003, issued April, 2018, to add updated information for Carrying Capacity Reduced Label.

installation procedure.

This notice informs dealers of the coolant level in radiator condenser tanks being above the "Full" level mark. Dealers are informed not to reduce coolant levels due to the level being normalized after several heat cycles. This TIN is a revision of TIN-18-14-001.

This notice informs dealers of the coolant level in the radiator condenser tanks being 10mm above the "Full" level mark.