2021 Mitsubishi Fuso FEC9T TSBs

technician quiz for 2023.

technician quiz for 2023.

residue.

capacity be affixed to vehicles when the total net weight of accessories is more than 1.5 percent of the vehicle's gross vehicle weight rating (GVWR) or 100 lbs.

100 use.

MDL beginning with Model Year 2020. As new Model Year manuals become available, they too will be added.

INVOLVED: Certain 2019-2020 model year FEC7T and FECZT trucks. NOTE: The information contained in this document is intended for use by trained, professional technicians with the knowledge, tools, and equipment to properly and safely perform diagnoses and repairs. It informs service technicians about conditions that may occur in some vehicles, or provides information that could assist in proper vehicle diagnosis, service, or repair, and does not indicate that a defect is present in every vehicle referenced in this bulletin. DO NOT assume that a symptom or condition, or a described cause of a symptom or condition, affects any particular vehicle or that a described repair applies to any particular vehicle. There can be multiple causes resulting in the same symptoms or conditions, and trained professional service technicians must use their diagnostic skills to make evaluations on a case-by-case basis. MODIFICATION: The engine ECU software must be updated.

DESCRIPTION: Rear combination turn signal/tail lamp replacement connectors kits are now available to streamline connector repairs. REPLACEMENT PARTS: Connector Kit (Male) MH050280 1 kit required per truck Connector Kit (Female) MH050294 1 kit required per truck Crimp Connector (Duraseal) MC037984-1 20 required per truck Note: Each connector kit repairs 2 connectors. There are 12 wires in each kit. However, in this market, the turn signal/tail lamp connectors are configured with only 5 wires, so there are 2 extra wires in each kit. INSTALLATION INSTRUCTIONS: See the installation instructions on the following pages. Please note that any special tools needed to complete this repair must be procured locally. Open the Printer Friendly Version to view the installation instructions.