2026 MINI Cooper S TSBs
8 Technical Service Bulletins across 7 categories
Categories
Body & Paint
2 bulletinsThe power windows and exterior mirrors do not function on the driver and/or passenger side.
Read full bulletin
The fault occurs on either the driver or on the passenger side. It does not occur on both sides at the same time.
The sunshade for the panoramic sunroof is sticking, discolored, and/or damaged.
Electrical
1 bulletinDuring vehicle start-up the Secure Element (SE) of the BCP may fail causing communication errors.
Read full bulletin
TheCheck Control message Drive carefully. Driving stabilisation. will appear. In addition, the fault memoryentries below will be stored within 40 seconds of each other. ACSM: 02010A - Coding: Coding data not qualified VIP: 02390A - VIP control unit: Coding data not released, signature IB: 02290A - DSC control unit: Coding data not released, signature HKFM: 020D0A - HKFM: Coding data are not qualified
Air Bags & Safety
1 bulletinIn some situations, an emergency call may be triggered in the vehicle without either the customer pressing the SOS Call...
Read full bulletin
button, or an airbag deployment event. In some cases, the customer may not even be inside the vehicle.
Lighting
1 bulletinWhile using the MINI Personal Assistant to initiate a phone call to a specific contact, either another contact is...
Read full bulletin
dialed, or the MINI Personal Assistant cannot locate the requested contact.
Transmission
1 bulletinThe parking brake actuator has not been wound correctly cannot be applied or released.
Read full bulletin
Check Control message Parking brake failed. When parking, secure the vehicle against rolling away. Mustbe checked by the Service Partner. The vehicle is still held by the unaffected side and the transmission lock.
Other
1 bulletinA clicking noise can be heard from one or both front seat backrests.
Read full bulletin
This noise is heard when leaning against the backrest of the seat, or while the vehicle is cornering.
Software & Calibration
1 bulletinStarting from I-level 24-07-500, it is possible that the Automatic Hold function is not automatically storedfor the next journey.
Read full bulletin
The function must be activated again by the driver at the beginning of every trip. After asoftware update to 25-03-500 and higher, this occurs more frequently.