2006 Mercury Mariner Hybrid TSBs

The ETC_ACT and ETC_DSD PIDs should not used to diagnose possible ETB concerns. The IDS has a limited refresh rate when reading these PIDs and cannot display quickly enough to validate a concern. The PCM automatically monitors these inputs more accurately and will set diagnostic trouble codes (DTCs) when appropriate. Using these PIDs for diagnostics will lead to inaccurate results and improper ETB replacements. If a concern is intermittent and no DTCs are present, refer to historical DTCs and the PC/ED, Section 3 No DTCs Present Index chart for further information.

AND/OR P0A96 (BATTERY PACK COOLING FAN 2 CONTROL CIRCUIT) IN THE TRACTION BATTERY CONTROL MODULE (TBCM). THESE CODES BY THEMSELVES NORMALLY DO NOT RESULT IN ANY SYMPTOMS THAT ARE NOTICEABLE TO THE CUSTOMER. REPLACE BOTH HIGH VOLTAGE TRACTION BATTERY (HVTB) COOLING FANS. *PE

C1480 AND/OR C1481

*PE

SPEED RUN TIME AND EXTENDED IDLING MAY EXHIBIT A RED TRIANGLE LIGHT AND CODES INDICATING A TRANSAXLE OVERTEMP. THIS CONDITION MAY RESULT IN REDUCED POWER AS THE SYSTEM ACTIVATES FAIL SAFE OPERATION. *PE

CONDITION MAY RESULT IN REDUCED POWER AS SYSTEM ACTIVATES FAIL SAFE OPERATION. *PE

MESSAGE CENTER, ACCOMPANIED BY A SUDDEN RPM LOSS/NO START WITH A DIAGNOSTIC TROUBLE CODE (DTC) P1A0C. *PE