2014 Mercedes-Benz GLK204 TSBs
29 Technical Service Bulletins across 6 categories
Other
10 bulletinsPassenger side wiper arm strikes vent grille of water collector
Message in instrument cluster "DISTRONIC PLUSCurrently Unavailable - See Owner's Manual"
Throttle lift-off clunking noises at drive shafts of front axle
Vehicle wanders to the left or right.
Complaints about poor wiping effect of winshield wiper
SENTEX gate operator with Clik Card Remote not compatible with Homelink
Malfunctions of various control units and/or on-board power supply problems caused by water in the control unit tray...
Read full bulletin
under the driver/front passenger seat (dislocated, pinched or leaking condensation hose)
Facebook app cannot be opened
Heating element of AdBlue tank has malfunction, fault code 20BE1B and/or 20BD1B logged in BlueTec control unit
Drive Kit Plus: Digital DriveStyle app does not launch automatically
Transmission
8 bulletinsShift quality complaints and/or automatic transmission in limp-home mode in combination with one or more of the...
Read full bulletin
following fault codes: P060600, P072200, P072300, P072364, P072900, P073000, P073100, P073200, P073300, P073400, P073500, P076F00.
Procedure in case of slight oil traces on TRANSMISSION 722.9
Procedure in case of slight oil traces on TRANSMISSION 722.9
M276 MY2013 and MY2014 - Harsh Shifts: 4-3, 4-5
Friction power of torque converter lockup clutch is too high (FC 2783) or actuation of torque converter lockup clutch...
Read full bulletin
not possible (FC 0741)
Procedure in case of slight oil traces on TRANSMISSION 722.9 with CODE B03
Friction power of torque converter lockup clutch is too high (FC 2783) or actuation of torque converter lockup clutch...
Read full bulletin
not possible (FC 0741)
"SHIFT QUALITY COMPLAINTS AND/OR AUTOMATIC TRANSMISSION IN LIMP-HOME MODE IN COMBINATION WITH FAULT CODES P060600, ...
Read full bulletin
P072000, P072200, P072300, P072364, P072900, P073000 P073100, P073200, P073300, P073400, P073500, P076F00"
Engine
6 bulletinsEngine diagnosis warning lamp lights up.
Read full bulletin
The fault code (FC) P0101FA or P0101Fb or P0101FC is logged in the engine control unit.
Engine noises (rattling) after engine start
Engine diagnosis warning lamp lights up.
Read full bulletin
The fault code (FC) P0101FA or P0101Fb or P0101FC is logged in the engine control unit.
Engine noises after engine start
Check Engine Light (CEL) on, DTC fault code(s) concerning throttle valve actuator
Engine diagnosis warning lamp lights up in instrument cluster, fault code U145400: "Implausible data were received from...
Read full bulletin
the ethanol sensor"
Electrical
2 bulletinsThis Service Campaign has been initiated because Daimler AG (DAG), the manufacturer of Mercedes-Benz vehicles, has...
Read full bulletin
determined that the mbrace software does not correspond to current production configuration. An authorized Mercedes-Benz dealer will update the mbrace control module software at the next workshop visit.
Creaking noise when adjusting electrical steering column
Lighting
2 bulletinsThis Customer 1 Action has been initiated because certain mbrace subscribers were recently contacted by mbrace...
Read full bulletin
informing them that they need to have an i-button call performed to ensure their mbrace device has registered with the Verizon Telematics systems. If the i-button call failed or if the customer was unable to perform the i-button call, the mbrace agent instructed the customer to make an appointment with their dealer to have the issue corrected and/or i-button call performed. The vehicles impacted range from model year 2002 to 2014.
Fault codes for standing light 1 found in driver-side SAM
Suspension
1 bulletinGrinding noises from area of front axle - wheel bearing malfunctioning