Powered byNHTSA|EPA|Community Reports|Updated

2025 Mack MD TSBs

20 Technical Service Bulletins across 7 categories

Other

7 bulletins
11032092

CBR - Mack Chassis - Through Shaft Bearing Retainer Breakage On Mack Carriers.

11032086

CBR - Mack Carrier Nut Adhesive Change.

11030579

CBR - No Start Condition After Over the Air Programing.

11021333

CBR - To correct the MID136 SID 66 FMI 7 fault code the latest Bendix VCP file will need to downloaded.

11021332

CBR - A significant GPS reporting issue is affecting fleet operations, with trucks maintaining back-office communication...

Read full bulletin

but failing to transmit GPS location data.

11008366

CBR: To correct the MID136 SID 66 FMI 7 fault code the latest Bendix VCP fi le will need to be downloaded.

11005410

CBR: Telematics Gateway (TGW) Connect Ability Issues

Electrical

3 bulletins
11022289

CBR - When an OTA (Over-The-Air) job starts to program the VECU blocks the starter relay out, if the job ends in a...

Read full bulletin

Critical failure, the vehicle will remain in Safe State.

11018813

Mack DEF Level (UQLS) Sensor Troubleshooting Guide - US17+OBD16 Emissions and Newer

11006927

CBR: Diagnostic Trouble Code (DTC) U010187- Lost Communication With TECU

Suspension

3 bulletins
11021335

CBR - Mack Trucks has identified that certain 2025 model year Mack Medium Duty (MMD) vehicles may have been assembled...

Read full bulletin

with insufficient torque on the fan hub retaining hardware.

11012165

Mack Trucks has identified that certain 2025 model year Mack Medium Duty (MMD) vehicles may have been assembled with...

Read full bulletin

insufficient torque on the fan hub retaining hardware. To address this issue and maintain Mack's high-quality standards, please follow the instructions below to properly retorque the fan hub retaining hardware.

11012156

Frame lean can be caused by several seemingly isolated possibilities.

Read full bulletin

The two most common are suspension and frame assembly issues.

Engine

3 bulletins
11010857

Vehicles may present with oil leak coming from the clutch/flywheel housing and observation of burned clutch smell or clutch slipping.

Read full bulletin

These symptoms can be mistaken as a crankshaft rear main seal leak, when the actual cause is the crankshaft adaptor O-ring.

10253807

CBR: Turbo Compound (TC) Hot Side Noise, Diagnostic Information.

10252308

CBR: Vehicles built with an 11 liter engine may experience a complaint of excessive fuel in the oil.

Read full bulletin

It is possible that the source of the fuel is the rear fuel galley plug in the cylinder head.

Transmission

2 bulletins
11030591

TSB - Cable, Gear Selector, Replacement

10253804

CBR: Equipped With An Automated Manual Transmission Model D or F ( AMT-D, AMT-F, mDrive) Missing X1 Value In VDA And...

Read full bulletin

Default Settings Guidelines, ParameterP1AOB; Fault Code P1052-54, Error 40,Or Error 18 Encountered During Clutch Or Tran.

Pre-Delivery & Maintenance

1 bulletin
11024784

CBR - Wiper Linkage Inspection.

Fuel System

1 bulletin
11016342

If oil dilution is suspected refer to the applicable CBR solution below: CBR-659Mack Chassis - Oil Diluted With Fuel;...

Read full bulletin

Fuel In Oil, Diagnostic Information - All Emissions, All Model Years