2008 Lotus Exige TSBs

There is often insufficient, or inconsistent information received from dealers when reporting ECU & TCU related faults, this can lead to unacceptable delays in repairing vehicles.

This bulletin aims to standardise the information when filing a claim to After Sales.

The increased frequency of battery disconnection/reconnection that vehicles are subjected to during transportation from the factory to the dealer or in some instances the prolonged storage, vehicle inactivity and resultant battery discharge may result in DTC?s (Diagnostic Trouble Codes) being generated by the vehicles ECU (Electronic Control Unit).

REQUEST A FURTHER RANGE OF CARS WHICH ARE NOT CONSIDERED TO BE AT RISK, ARE ALSO CHECKED AT THE NEXT OPPORTUNITY AS A PRECAUTIONARY MEASURE. *PE

TO IMPROVE SECURITY OF CONTROL ROD TO INTERIOR RELEASE HANDLE. *PE

TSB reminds dealers of correct replacement and running-in procedures.

concerning the necessary procedures required to ensure that that the air conditioning compressor is correctly ?run in? after any major HVAC repairs/replacements have been carried out.

Insufficient lubrication will result in compressor failure due to seizure, reducing air conditioning performance and also generate diagnostic trouble codes.

diagnostic trouble codes (DTCs) P0101 & P1109. We have had several instances where DTCs P0101 & P1109 had been set and the car recovered into the dealer, only for them to find that the original equipment engine air intake filter had been substituted for a non-approved after-market type (applicable to both dry and oil coated types).

Due to parts obsolescence the CDL actuator assembly, part number B116M6039F is no longer available. This actuator was fitted into each door of any Toyota powertrain Elise and 4/6 cylinder Exiges from start of production up to '15MY VIN F_ _11652 equipped with central locking.

Due to parts obsolescence the windscreen washer bottle/pump assembly fitted to all Toyota power train Elise and 4-cylinder Exige from start of production (part number A116M0039F) is no longer available.

?08MY to present date by model year and powertrain as well as a special care point to be taken whilst fitting an Aftersales replacement instrument pack.

SANDWICH PLATES USED ON VEHICLES WITH FRONT MOUNTED OIL COOLERS, POSSIBLY HAVE INCORRECT FETTLING OF OIL COOLER FEED PORT, REDUCING OIL COOLING EFFICIENCY. *PE

TO INSPECT OIL COOLER FEED PORT FOR CORRECT AREA. *PE

The routing of all brake hoses and pipes is set during production to ensure that they cannot come into contact with any other ancillary components regardless of the vehicles suspension travel range or steering movement.

MAINTENANCE AND THE POSITIONING OF PIPE/HOSE. MODELS ELISE, EXIGE, EVORA, EUROPA. NO YEARS LISTED. *PE

NUMBERS, PRESENT DATE BY MODEL YEAR AND POWERTRAIN, SO INSTRUMENT DISPLAY AND FUNCTIONALITY OF REPLACEMENT UNIT CAN BE ADAPTED. MODEL 2008-2011 ELISE, EXIGE. *PE

*RM