2006 Lotus Exige TSBs
11 Technical Service Bulletins across 4 categories
Categories
Electrical
3 bulletinsStandard information required and procedures to be followed when reporting ECU & TCU faults.
Read full bulletin
There is often insufficient, or inconsistent information received from dealers when reporting ECU & TCU related faults, this can lead to unacceptable delays in repairing vehicles.
There is often inconsistent or insufficient information received from dealers when reporting ECU and TCU related faults.
Read full bulletin
This bulletin aims to standardise the information when filing a claim to After Sales.
To reinforce the importance of checking and clearing stored fault codes at time of PDI (Pre-Delivery Inspection).
Read full bulletin
The increased frequency of battery disconnection/reconnection that vehicles are subjected to during transportation from the factory to the dealer or in some instances the prolonged storage, vehicle inactivity and resultant battery discharge may result in DTC?s (Diagnostic Trouble Codes) being generated by the vehicles ECU (Electronic Control Unit).
HVAC & Climate
3 bulletinsAir conditioning compressors failing due to oil starvation.
Read full bulletin
TSB reminds dealers of correct replacement and running-in procedures.
Confirmation of updates to the Heating, Ventilation & Air Conditioning (HVAC) sections of the Technical Service Notes...
Read full bulletin
concerning the necessary procedures required to ensure that that the air conditioning compressor is correctly ?run in? after any major HVAC repairs/replacements have been carried out.
Clarification of air conditioning compressor ?Running-In? Procedure.
Read full bulletin
Insufficient lubrication will result in compressor failure due to seizure, reducing air conditioning performance and also generate diagnostic trouble codes.
Engine
3 bulletinsAny unauthorised modifications, including fitment of non-approved after-market air filter resulting in generation of...
Read full bulletin
diagnostic trouble codes (DTCs) P0101 & P1109. We have had several instances where DTCs P0101 & P1109 had been set and the car recovered into the dealer, only for them to find that the original equipment engine air intake filter had been substituted for a non-approved after-market type (applicable to both dry and oil coated types).
Retrofitment of the latest level CDL (Central Door Locking) actuator to earlier models if required.
Read full bulletin
Due to parts obsolescence the CDL actuator assembly, part number B116M6039F is no longer available. This actuator was fitted into each door of any Toyota powertrain Elise and 4/6 cylinder Exiges from start of production up to '15MY VIN F_ _11652 equipped with central locking.
Retrofitment of the latest level windscreen washer bottle/pump assembly to earlier models if required.
Read full bulletin
Due to parts obsolescence the windscreen washer bottle/pump assembly fitted to all Toyota power train Elise and 4-cylinder Exige from start of production (part number A116M0039F) is no longer available.
Brakes
2 bulletinsBrake hose/pipe inspection.
Read full bulletin
The routing of all brake hoses and pipes is set during production to ensure that they cannot come into contact with any other ancillary components regardless of the vehicles suspension travel range or steering movement.
LOTUS: INFORMATION PROVIDED REGARDING THE INSPECTION OF ALL BRAKE PIPE/HOSE, ON SOME VEHICLES, BASED ON SCHEDULED...
Read full bulletin
MAINTENANCE AND THE POSITIONING OF PIPE/HOSE. MODELS ELISE, EXIGE, EVORA, EUROPA. NO YEARS LISTED. *PE