2021 Lexus Rx350 TSBs

situations, including emergencies, the driver and Safety Connect operator may not be able to hear each other?s voices during a Safety Connect call

LC500, LC500h, LC500C, LS500, LS500h, NX300, NX300h, RC300, RC350, RC F CERTAIN 2021-2022 RX350, RX350L, RX450h, RX450hL CERTAIN 2022 GX460

IS350, LC500, LC500h, LC500C, LS500, LS500h, NX300, NX300h, RC300, RC350, RC F CERTAIN 2021-2022 RX350, RX350L, RX450h, RX450hL CERTAIN 2022 GX460

IS350, LC500, LC500h, LC500C, LS500, LS500h, NX300, NX300h, RC300, RC350, RC F CERTAIN 2021-2022 RX350, RX350L, RX450h, RX450hL CERTAIN 2022 GX460

situations, including emergencies, the driver and Safety Connect operator may not be able to hear each other?s voices during a Safety Connect call

situations, including emergencies, the driver and Safety Connect operator may not be able to hear each other?s voices during a Safety Connect call.

This Service Bulletin should be used in conjunction with the applicable model and model year Electronic Wiring Diagram (EWD) and/or Repair Manual.

In addition, some models may also utilize retaining hooks (clips) for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the Installation Procedure in this bulletin to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retaining hooks (clips).

These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Lexus does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should check battery SOC and recharge, if necessary, no more than 48 hours before delivery to the customer.

In addition, some models may also utilize retaining hooks (clips) for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the Installation Procedure in this bulletin to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retaining hooks (clips).

?The lashing holes are intended to be plugged during Pre-Delivery Service (PDS). ?The plugs are -Required for anti-corrosion purposes. -Usually located in the glove box prior to PDS. ?The number of plugs may be different based on model and production location.

These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Lexus does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should check battery SOC and recharge, if necessary, no more than 48 hours before delivery to the customer.

a ?Good? condition, the DCA will automatically enter a post-test charging mode. In the post-test charging mode, the DCA analyzes the current state of charge of the battery and automatically begins to charge the battery to a fully charged condition, 100% state of charge. The time required to charge the battery to full will vary. Once the DCA enters the post-test charging mode the battery test has been completed, and further charging can be conducted under the Technician?s discretion. Selecting ?Stop? will cancel the automatic charging of the battery and return the user to the DCA results screen. The test results and charge time can be printed or emailed from the results screen.

In addition, some models may also utilize retaining hooks (clips) for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the Installation Procedure in this bulletin to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retaining hooks (clips).

(versions less than 1225 or 1245 with 20 Teammate) may exhibit one or more of the following conditions: ?Navigation reset while entering a destination. ?Voice command does not recognize Starbucks. ??Unable to establish audio connection? message, and Alexa is unable to resume after Android AutoTM interruption. ?Soft buttons grayed Out during panoramic view monitor transition. ?HVAC fan speed displayed incorrectly. ?Volume cannot be adjusted with the rear seat remote control. ?Multimedia system reboots when iPhone is connected via USB. ?Energy flow information is missing on energy monitor screen. ?Clearance sonar indication on backup camera screen is missing. ?Audio from USB devices intermittently works. ?iPhone ringer continues after answering call. ?Audio titles not displayed. ?Toyota apps screen menu not displayed. Some 2020 ? 2021 model year vehicles equipped with 17CY+ Panasonic Navigation (version less than 1150) and Audio (version less than 1163) may exhibit one or more of the following conditions: ?Poor map screen touch operation. ?Navigation system reset. ?Climate temperature control difficult to operate. ??Waiting for the Beep? message displayed, voice recognition does not start when pressing the push to talk button. ?Blower motor speed incorrectly displayed. ?White CarPlay screen when connecting iPhone12. ?Navigation sub-screen blank while playing a CD. ?Inoperative rear seat entertainment track controls. ?Abnormal energy flow screen appearance. ?Incorrect FM or SiriusXM genre Information. A software update is now available to address these conditions. Follow the Software Update Procedure in this bulletin to address these conditions.

in some 2016 ? 2022 model year Lexus vehicles equipped with an FKS engine

in some 2016 ? 2022 model year Lexus vehicles equipped with an FKS engine

This issue is currently under investigation. Please take detailed pictures of the location of the oil pan leak condition before repair. If the condition is on applicable vehicles with engine serial numbers that do not start with F or G, disregard and proceed with normal repair.

This issue is currently under investigation. Please take detailed pictures of the location of the oil pan leak condition before repair.

fuel tank area at idle, vehicle stationary, with a full tank of gasoline. Follow the Repair Procedure in this bulletin to address this condition.

(version 1163) or earlier may exhibit one or more of the following conditions: ?Poor map screen touch operation. ?Navigation system reset. ?Climate temperature control difficult to operate. ??Waiting for the Beep? message displayed, voice recognition does not start when pressing the push to talk button. ?Blower motor speed incorrectly displayed. ?White CarPlay screen when connecting iPhone12. ?Navigation sub-screen blank while playing a CD. ?Inoperative rear seat entertainment track controls. ?Abnormal energy flow screen appearance. ?Incorrect FM or SiriusXM genre Information. Some 2020 ? 2021 model year vehicles equipped with 17CY+ Panasonic Navigation (version 1110) or earlier and Audio (version 1123) may exhibit one or more of the following conditions: ?Android AutoTM music does not resume after the vehicle is turned OFF and then ON. ?Incorrect cover art is displayed from a previous song. ?CarPlay unexpectedly resumes after turning audio OFF and pushing Menu switch. ?MAP switch inoperative when in a Bluetooth call and connected to Android AutoTM. ?Pop noise when selecting track up/down of USB audio. ?Touch pad feedback continues when feedback setting is turned OFF. ?Blank navigation screen. ?Low Bluetooth audio volume. ?Bluetooth connection screen button was greyed out. ?Climate temperature control difficult to operate. ?Menu buttons do not light up when pushed. ?Blower level is not displayed correctly. Some 2020 ? 2021 model year Lexus vehicles equipped with Navigation (version 1060) or earlier and Audio (version 1060) or earlier may exhibit one or more of the following conditions: ?Display screen distortion/pixilation. A software update is now available to address these conditions. Follow the Software Update Procedure in this bulletin to address these conditions.

in some 2016 ? 2021 model year Lexus vehicles equipped with an FKS engine.

cylinder misfire Diagnostic Trouble Code (DTC) combinations: ?P030100 and P030400 (Cylinders 1 and 4 Misfires Detected). ?P030200 and P030500 (Cylinders 2 and 5 Misfires Detected). ?P030300 and P030600 (Cylinders 3 and 6 Misfires Detected). One or more of the following ancillary DTCs may also be present: ?P030027 (Random/Multiple Cylinder Misfire Detected [Emission] Signal Rate of Change Above Threshold). ?P030085 (Random/Multiple Cylinder Misfire Detected [Over Temperature] Signal Above Allowable Range). Follow the Repair Procedure in this bulletin to address this condition.

or earlier may exhibit one or more of the following conditions: ?Display screen distortion/pixilation. ?iOS device would not connect until disconnecting and reconnecting USB cable. ?iOS device would not connect until ACC OFF > ON. Some 2020 model year Lexus vehicles equipped with Navigation (version 1030) or earlier and Audio (version 1036) or earlier may exhibit one or more of the following conditions: ?Abnormal clock operation in Auto Daylight Savings Time mode. ?CarPlay inoperative. ?USB audio does not resume after turning the engine OFF and ON. ?Reply button not displayed on the text message screen. ?Reset during phonebook transfer. ?Bluetooth calls disconnected. ?Enform submenu inoperative from touch screen. ?Push to Talk button long press starts native voice recognition. ?Destination Assist frozen when pressing SOS button. ?Navigation screen slow booting or does not boot up. Some 2020 model year Lexus vehicles equipped with Navigation (version 1006) or earlier and Audio (version 1007) or earlier, may exhibit one or more of the following conditions: ?Voice Command ?Barge-in? defaults to OFF. ?Handset Mode label incorrect. ?AndroidTM Auto music does not resume after using Destination Assist. ?Abnormal return/back arrow illumination operation. ?Destination Assist will not cancel while playing AndroidTM Auto music. ?Gracenote cover art is not displayed. ?Incorrect Destination Assist vehicle position. A software update is now available to address these conditions. Follow the Software Update Procedure in this bulletin to address these conditions.

fuel tank area at idle, vehicle stationary, with a full tank of gasoline. Follow the Repair Procedure in this bulletin to address this condition.

Service Lane - Knowledge Center.

Specifically, we are looking at vehicle surge/hesitation condition (inconsistent acceleration) and would like to recover detailed customer voice and vehicle data.

Specifically, we are looking at vehicle surge/hesitation condition (inconsistent acceleration) and would like to recover detailed customer voice and vehicle data.

Specifically, we are looking at vehicle surge/hesitation condition (inconsistent acceleration) and would like to recover detailed customer voice and vehicle data.

Specifically, we are looking at vehicle surge/hesitation condition (inconsistent acceleration) and would like to recover detailed customer voice and vehicle data.

Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the expiration date of the dynamic subscription (stored in the head unit), must be checked. If the expiration date has not passed, a license key may be generated without the purchase of an activation card number (ACN). Updating the map without the use of an ACN is considered an Embedded Navigation Update (refer to pg. 10) and performing this update does not extend the subscription to dynamic map services. If the subscription period has expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an ACN. Utilizing an ACN, will initiate the Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the embedded navigation update and provide dynamic map services for a period of two years from the date that the Dynamic Navigation Update is performed. ACNs are provided in a pamphlet available through the normal parts ordering system

remanufactured head unit return to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by audio suppliers, FTS, and/or FPEs.

The date that is shown could be more than one year in the future. This does not indicate any issues with the vehicle and is only informing the user of the expiration date.

remanufactured head unit return to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by audio suppliers, FTS, and/or FPEs.

During Pre-Delivery Service (PDS), follow the instructions contained within the Software Confirmation section of this bulletin to ensure that the software is installed correctly. If it is found that the software is not installed correctly, proceed to the Software Installation section of this bulletin. It may also be necessary to reinstall the eOM software after replacing the head unit. Refer to the Software Confirmation section of this bulletin to determine if the software is already installed. If the software is not installed, proceed to the USB Flash Drive Preparation and Software Installation sections of this bulletin.

As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.

This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.

This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.

As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.

During Pre-Delivery Service (PDS), follow the instructions contained within the Software Confirmation section of this bulletin to ensure that the software is installed correctly. If it is found that the software is not installed correctly, proceed to the Software Installation section of this bulletin. It may also be necessary to reinstall the eOM software after replacing the head unit. Refer to the Software Confirmation section of this bulletin to determine if the software is already installed. If the software is not installed, proceed to the USB Flash Drive Preparation and Software Installation sections of this bulletin.

Please see L-SB-0007-23

established, vehicle settings and/or network/cellular coverage concerns.

established, vehicle settings and/or network/cellular coverage concerns

inoperative when attempting to send commands to the vehicle. To simplify the diagnosis of this system and prevent the unnecessary replacement of parts, please refer to the procedure below.

Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments.

?Abnormal Operation? condition from the rear differential front coupling. In some cases, even an ?AWD System Message? with or without a DTC may be present with or without other conditions present.

being established, vehicle settings and/or network/cellular coverage concerns.

diagnostic information in one document.

condition where the rear combination lamp front corner on the right and/or left-hand side expands and contacts the body. This condition may occur in hot and/or sunny conditions and may result in paint chipping on the body panel. Follow the Repair Procedure in this bulletin to address this condition

sliding roof assembly when it is in the tilted open position while driving over a bumpy road. Follow the Repair Procedure in this bulletin to address this condition

a high-pressure rinse cycle car wash. In most cases, a small amount of water is either missing or bouncing off the rain gutter and dripping into the interior (center console, seat, driver, etc.).

sliding roof assembly when it is in the tilted open position while driving over a bumpy road. Follow the Repair Procedure in this bulletin to address this condition

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.

in which the hood release cable is binding, seizing, or sticking. The hood lock control cable assembly may be corroding and begin to seize, increasing the effort required to pull the release lever and release the hood latch. Follow the Repair Procedure in this bulletin to address this condition.

where the hood release cable is binding, seizing, or sticking. The hood lock control cable assembly may be corroding and begin to seize, increasing the effort required to pull the release lever and release the hood latch. Follow the Repair Procedure in this bulletin to address this condition.

The Monroney label only mentions the compass is in the rear-view mirror.

The Monroney label only mentions the compass is in the rear-view mirror.

have a quality concern relating to a missing kit component (mispack). Lexus is requesting the return of ALL Dealer inventory of these parts to your facing PDC for credit and inspection.

Additionally, refer to the applicable Pre-Delivery Service (PDS) Check Sheet for services to be performed.

stores and causing dealer stock to age. Due to this situation, dealers are reminded and recommended to follow the Long-Term Vehicle Storage Guidelines outlined in L-SB-0015-20 and other Service Bulletin publications to ensure customers receive their vehicles in a fresh and well maintained condition. Please ensure that both Sales and Service at your dealership are aware of these guidelines and are following the recommended maintenance and storage processes and procedures to ensure the highest customer satisfaction with their new vehicle purchase.

Countermeasure parts are available to reduce the droning noise. Follow the Repair Procedure in this bulletin to address this condition.

evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part.

The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.

The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.

The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.

This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Lexus.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.

If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Follow the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle.

If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation.

?The difference between the LT and LX type gear oil is only relevant to models equipped with Limited Slip type (Dynamic Torque Vectoring) AWD systems. ?LX oil can be used in both LSD and non-LSD equipped vehicles, for vehicles with standard non-LSD AWD systems, the use of LX type gear oil proves no issue to substitute for the LT type gear oil typically found in Dynamic Torque Control AWD systems on RX350/L models. However, use of LT CANNOT be used in LSD equipped vehicles. ?The Difference between LT and LX gear oil can be easily identified by the color of the fluid. oLX gear oil is red/pink in color. oLT gear oil is tan/brown in color.

?The difference between the LT and LX type gear oil is only relevant to models equipped with Limited Slip type (Dynamic Torque Vectoring) AWD systems. ?For vehicles with standard Non-LSD AWD systems, the use of LX type gear oil proves no issue to substitute for the LT type gear oil typically found in Dynamic Torque Control AWD systems on RX350/L models. ?The Difference between LT and LX gear oil can be easily identified by the color of the fluid. oLX gear oil is red/pink in color. oLT gear oil is tan/brown in color.

of the following conditions: ?Abnormal Bluetooth Audio Mode transition. ?Difficult radio tune knob operation when selecting audio source. Some 2020 ? 2021 model year Lexus vehicles equipped with Pioneer Audio (version 1799) or earlier may exhibit one or more of the following conditions: ?Album art inoperative. ?Low Volume from CarPlay FaceTime Audio Calls. ?Pause function intermittently inoperative in CD mode. ?Intermittent Diagnostic Trouble Code (DTC) B15FE present. ?Abnormal energy flow screen appearance on Hybrid models. ?Abnormal phone call operation during Apple CarPlay. ??No Information? displayed in Information Screen. ?No audio after voice guidance in Android Auto. ?Repeat Function Inoperative in Bluetooth Audio Mode. ?Audio does not resume after CarPlay Voicemail. ?Climate temperature control difficult to operate. ?Text message screen Reply button is inoperative using Apple iOS13 or later. Follow the Multimedia Software Update Procedure in this bulletin to install the latest software version

model year Lexus vehicles.

?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.

ST004-01, SU001-08, and L-SB-0174-08. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding. This Service Bulletin provides best practice procedures for vehicle pulling complaint, diagnosis, and repair for 2002 ? 2021 model year Lexus vehicles. This information supplements Repair Manual procedures when the symptoms are: ?Vehicle Pulling: The vehicle moves to the right or left when the driver holds the steering wheel while driving straight ahead without exerting steering effort. ?Steering Wheel Off Center: The vehicle travels straight, but the steering wheel is not pointed straight ahead. The vehicle is not pulling. Before repairing a vehicle pulling to one side, it is necessary to clearly identify the cause of the pulling condition. Frequently, pulling to one side is diagnosed as a wheel alignment concern. However, the actual cause may be related to the lateral force generated by the tires, vehicle damage, road crown or worn components. Performing a wheel alignment when tire force is the cause could result in the wheel alignment being set at a value outside of specifications. This could then cause other problems such as uneven tire wear, etc. A customer may notice a pull to the left when in the left lanes of travel and notice a pull to the right or no pull when traveling in the right lanes of travel on the very same section of roadway. This road crown effect is environmental and cannot be corrected with suspension adjustments or any other wheel or tire modification discussed in this bulletin.