2009 Lexus Rx350 TSBs

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.

Coverage for Cracked and/or Sticky/Melting Dashboards ( Inst krukment Panels) as a Result of Heat or Humidity.

L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, PG002-90, L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003 93, and PG002-90. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1990 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS 250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS 250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles.

NOTE: The same Warranty Enhancement Program coverage described herein is also applicable to certain 2006-2008 MY IS 250/350 and certain 2007 MY LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity. Late Production 2008 IS 250/350 vehicles are only eligible for cracked and/or sticky/melting Front and Rear Interior Door Panels as a result of heat or humidity. In Mid-December, 2014 Lexus announced the reimbursement phase of this warranty enhancement program. Since that announcement, Lexus has been diligently making parts preparations for the parts replacement phase of this Program. Due to the age, volume, and breadth of the covered vehicles subject to the Program and the size and complexity of dashboard manufacturing, Lexus will be launching the part replacement portion of this Program in several phases; please refer to the table below for part replacement model phasing.

NOTE: The same Warranty Enhancement Program coverage described herein is also applicable to certain 2006-2008 MY IS 250/350 and certain 2007 MY LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity. Late Production 2008 IS 250/350 vehicles are only eligible for cracked and/or sticky/melting Front and Rear Interior Door Panels as a result of heat or humidity. In Mid-December, 2014 Lexus announced the reimbursement phase of this warranty enhancement program. Since that announcement, Lexus has been diligently making parts preparations for the parts replacement phase of this Program. Due to the age, volume, and breadth of the covered vehicles subject to the Program and the size and complexity of dashboard manufacturing, Lexus will be launching the part replacement portion of this Program in several phases; please refer to the table below for part replacement model phasing.

NOTE: The same Warranty Enhancement Program coverage described herein is also applicable to certain 2006-2008 MY IS 250/350 and certain 2007 MY LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity. In Mid-December, 2014 Lexus announced the reimbursement Phase of this warranty enhancement program. Since prior to that announcement, Lexus has been diligently making parts preparations for the parts replacement phase of this Program. Due to the age, volume, and breadth of the covered vehicles subject to the Program and the size and complexity of dashboard manufacturing, Lexus will be launching the part replacement portion of this Program in several phases; please refer to the table below for part replacement model phasing.

NOTE: The same Warranty Enhancement Program coverage described herein is also applicable to certain 2006-2008 MY IS 250/350 and certain 2007 MY LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity.In Mid-December, 2014 Lexus announced the reimbursement Phase of this warranty enhancement program. Since prior to that announcement, Lexus has been diligently making parts preparations for the parts replacement phase of this Program. Due to the age, volume, and breadth of the covered vehicles subject to the Program and the size and complexity of dashboard manufacturing, Lexus will be launching the part replacement portion of this Program in several phases; please refer to the table below for part replacement model phasing. Although Lexus is increasing production levels, it is difficult to predict customer demand and where parts need to be shipped to support customer demand. It is important that dealerships explain to customers that there still may be a period of time the customer will need to wait before part replacement can be performed. Please be sure to take this into consideration when performing customer scheduling.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS 250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles. NOTE: The same Warranty Enhancement Program coverage described herein is also applicable to 2006 - 2008 Model Year IS 250/350 and 2007 Model Year LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS 250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles. NOTE: The same Warranty Enhancement Program coverage described herein is also applicable to 2006 - 2008 Model Year IS 250/350 and 2007 Model Year LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity.

This program extends the warranty coverage for repairs related to cracked and/or sticky/melted dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles.

This program extends the warranty coverage for repairs related to cracked and/or sticky/melted dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles.

Extension of Warranty Coverage for Cracked and/or Sticky/Melting Dashboards (Instrument Panels) as a Result of Heat or Humidity.

This program extends the warranty coverage for repairs related to cracked and/or sticky/melted dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles.

This program extends the warranty coverage for repairs related to cracked and/or sticky/melted dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS 250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS 250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles.

NOTE: The same Warranty Enhancement Program coverage described herein is also applicable to certain 2006-2008 MY IS 250/350 and certain 2007 MY LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity.In Mid-December, 2014 Lexus announced the reimbursement Phase of this warranty enhancement program. Since prior to that announcement, Lexus has been diligently making parts preparations for the parts replacement phase of this Program. Due to the age, volume, and breadth of the covered vehicles subject to the Program and the size and complexity of dashboard manufacturing, Lexus will be launching the part replacement portion of this Program in several phases; please refer to the table below for part replacement model phasing. Although Lexus is increasing production levels, it is difficult to predict customer demand and where parts need to be shipped to support customer demand. It is important that dealerships explain to customers that there still may be a period of time the customer will need to wait before part replacement can be performed. Please be sure to take this into consideration when performing customer scheduling.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS 250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles. NOTE: The same Warranty Enhancement Program coverage described herein is also applicable to 2006 - 2008 Model Year IS 250/350 and 2007 Model Year LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS 250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles. NOTE: The same Warranty Enhancement Program coverage described herein is also applicable to 2006 - 2008 Model Year IS 250/350 and 2007 Model Year LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity.

two windshield stoppers bonded to the top of the windshield or the windshield retainers bonded to the lower edge of the windshield. This bulletin provides the recommended repair procedure to eliminate these types of noises from the windshield area.

Operation Communication Bulletins may reference specifically required adhesives and sealants

? February 11, 2015 Rev1: Applicability has been updated to include 2006 ? 2015 model year Lexus vehicles. On some vehicles, when Rapgard? is removed, the paint may have a stained appearance. These stains appear to be under the clear coat. The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture. Use the following procedure to address this condition.

NOTE: The same Warranty Enhancement Program coverage described herein is also applicable to certain 2006-2008 MY IS 250/350 and certain 2007 MY LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity. In Mid-December, 2014 Lexus announced the reimbursement phase of this warranty enhancement program. Since that announcement, Lexus has been diligently making parts preparations for the parts replacement phase of this Program. Due to the age, volume, and breadth of the covered vehicles subject to the Program and the size and complexity of dashboard manufacturing, Lexus will be launching the part replacement portion of this Program in several phases; please refer to the table below for part replacement model phasing.

These stains appear to be under the clear coat. The stain patterns are usually under wrinkles in the Rapgard. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture. Use the following procedure to address this concern.

These stains appear to be under the clear coat. The stain patterns are usually under wrinkles in the Rapgard. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture. Use the following procedure to address this concern.

NOTE: THE SAME WARRANTY ENHANCEMENT PROGRAM COVERAGE DESCRIBED HEREIN IS ALSO APPLICABLE TO CERTAIN 2006-2008 MY IS 250/350 AND CERTAIN 2007 MY LS 460 VEHICLES FOR CRACKED AND/OR STICKY/MELTING FRONT AND REAR INTERIOR DOOR PANELS AS A RESULT OF HEAT OR HUMIDITY. LATE PRODUCTION 2008 IS 250/350 VEHICLES ARE ONLY ELIGIBLE FOR CRACKED AND/OR STICKY/MELTING FRONT AND REAR INTERIOR DOOR PANELS AS A RESULT OF HEAT OR HUMIDITY. IN MID-DECEMBER, 2014 LEXUS ANNOUNCED THE REIMBURSEMENT PHASE OF THIS WARRANTY ENHANCEMENT PROGRAM. SINCE THAT ANNOUNCEMENT, LEXUS HAS BEEN DILIGENTLY MAKING PARTS PREPARATIONS FOR THE PARTS REPLACEMENT PHASE OF THIS PROGRAM. DUE TO THE AGE, VOLUME, AND BREADTH OF THE COVERED VEHICLES SUBJECT TO THE PROGRAM AND THE SIZE AND COMPLEXITY OF DASHBOARD MANUFACTURING, LEXUS WILL BE LAUNCHING THE PART REPLACEMENT PORTION OF THIS PROGRAM IN SEVERAL PHASES; PLEASE REFER TO THE TABLE BELOW FOR PART REPLACEMENT MODEL PHASING."

NOTE: THE SAME WARRANTY ENHANCEMENT PROGRAM COVERAGE DESCRIBED HEREIN IS ALSO APPLICABLE TO CERTAIN 2006-2008 MY IS 250/350 AND CERTAIN 2007 MY LS 460 VEHICLES FOR CRACKED AND/OR STICKY/MELTING FRONT AND REAR INTERIOR DOOR PANELS AS A RESULT OF HEAT OR HUMIDITY. LATE PRODUCTION 2008 IS 250/350 VEHICLES ARE ONLY ELIGIBLE FOR CRACKED AND/OR STICKY/MELTING FRONT AND REAR INTERIOR DOOR PANELS AS A RESULT OF HEAT OR HUMIDITY. IN MID-DECEMBER, 2014 LEXUS ANNOUNCED THE REIMBURSEMENT PHASE OF THIS WARRANTY ENHANCEMENT PROGRAM. SINCE THAT ANNOUNCEMENT, LEXUS HAS BEEN DILIGENTLY MAKING PARTS PREPARATIONS FOR THE PARTS REPLACEMENT PHASE OF THIS PROGRAM. DUE TO THE AGE, VOLUME, AND BREADTH OF THE COVERED VEHICLES SUBJECT TO THE PROGRAM AND THE SIZE AND COMPLEXITY OF DASHBOARD MANUFACTURING, LEXUS WILL BE LAUNCHING THE PART REPLACEMENT PORTION OF THIS PROGRAM IN SEVERAL PHASES; PLEASE REFER TO THE TABLE BELOW FOR PART REPLACEMENT MODEL PHASING."

NOTE: THE SAME WARRANTY ENHANCEMENT PROGRAM COVERAGE DESCRIBED HEREIN IS ALSO APPLICABLE TO CERTAIN 2006-2008 MY IS 250/350 AND CERTAIN 2007 MY LS 460 VEHICLES FOR CRACKED AND/OR STICKY/MELTING FRONT AND REAR INTERIOR DOOR PANELS AS A RESULT OF HEAT OR HUMIDITY. IN MID-DECEMBER, 2014 LEXUS ANNOUNCED THE REIMBURSEMENT PHASE OF THIS WARRANTY ENHANCEMENT PROGRAM. SINCE PRIOR TO THAT ANNOUNCEMENT, LEXUS HAS BEEN DILIGENTLY MAKING PARTS PREPARATIONS FOR THE PARTS REPLACEMENT PHASE OF THIS PROGRAM. DUE TO THE AGE, VOLUME, AND BREADTH OF THE COVERED VEHICLES SUBJECT TO THE PROGRAM AND THE SIZE AND COMPLEXITY OF DASHBOARD MANUFACTURING, LEXUS WILL BE LAUNCHING THE PART REPLACEMENT PORTION OF THIS PROGRAM IN SEVERAL PHASES; PLEASE REFER TO THE TABLE BELOW FOR PART REPLACEMENT MODEL PHASING."

NOTE: THE SAME WARRANTY ENHANCEMENT PROGRAM COVERAGE DESCRIBED HEREIN IS ALSO APPLICABLE TO CERTAIN 2006-2008 MY IS 250/350 AND CERTAIN 2007 MY LS 460 VEHICLES FOR CRACKED AND/OR STICKY/MELTING FRONT AND REAR INTERIOR DOOR PANELS AS A RESULT OF HEAT OR HUMIDITY. IN MID-DECEMBER, 2014 LEXUS ANNOUNCED THE REIMBURSEMENT PHASE OF THIS WARRANTY ENHANCEMENT PROGRAM. SINCE THAT ANNOUNCEMENT, LEXUS HAS BEEN DILIGENTLY MAKING PARTS PREPARATIONS FOR THE PARTS REPLACEMENT PHASE OF THIS PROGRAM. DUE TO THE AGE, VOLUME, AND BREADTH OF THE COVERED VEHICLES SUBJECT TO THE PROGRAM AND THE SIZE AND COMPLEXITY OF DASHBOARD MANUFACTURING, LEXUS WILL BE LAUNCHING THE PART REPLACEMENT PORTION OF THIS PROGRAM IN SEVERAL PHASES; PLEASE REFER TO THE TABLE BELOW FOR PART REPLACEMENT MODEL PHASING. "

Please see L-SB-0023-20.

Please see L-SB-0008-20. Replacement Certification Labels and VIN Plates

Please see L-SB-0003-20.

support materials that will help remind dealership customers and associates of the importance of proper floor mat usage.

passcode for the system.

The Smart Key/Smart Entry systems conform to all applicable FCC rules. This bulletin details the applicable specifications for these systems.

Please see L-SB-0016-14.

settlement of the consolidated Economic Loss Class Actions. Dealerships may notice media coverage of this Fairness Hearing.

Once the system is reset, all previously registered keys will be erased.

Once the system is reset, all previously registered keys will be erased.

Please see L-SB-0082-14.

Please see L-SB-0092-13.

Please see L-SB-0092-13 .

OBSOLETE NOTICE November 28, 2017: This bulletin is now obsolete. Please see L-SB-0179-17.

Please see L-SB-0001-18.

Please see L-SB-0082-14.

Once the system is reset, all previously registered keys will be erased.

*RM

Follow the Repair Procedure in this bulletin to address this condition.

The noise can be duplicated when lightly accelerating and then decelerating, or when depressing the brake pedal with the shift lever in Park and then releasing the brake pedal. An improved vacuum check valve is now available to reduce this noise.

Enhancement Program to extend the warranty coverage for repairs related to a leaking or seeping Engine Oil Cooler Pipe. In these vehicles, Lexus has received some reports where vehicles can experience an oil leak or seep from the engine oil cooler pipe. Although the engine oil cooler pipe is covered by Lexus? New Vehicle Limited Warranty for 4 years or 50,000 miles (whichever occurs first), Lexus cares about each customer?s ownership experience. Lexus is now extending the warranty coverage for repairs related to a leaking or seeping engine oil cooler pipe. The following information is provided to inform you and your associates of the program notification schedule and the degree of your involvement. Additionally, an FAQ covering details of this Warranty Enhancement Program is enclosed for your reference.

Enhancement Program to extend the warranty coverage for repairs related to a leaking or seeping Engine Oil Cooler Pipe. In these vehicles, Lexus has received some reports where vehicles can experience an oil leak or seep from the engine oil cooler pipe. Although the engine oil cooler pipe is covered by Lexus? New Vehicle Limited Warranty for 4 years or 50,000 miles (whichever occurs first), Lexus cares about each customer?s ownership experience. Lexus is now extending the warranty coverage for repairs related to a leaking or seeping engine oil cooler pipe. The following information is provided to inform you and your associates of the program notification schedule and the degree of your involvement. Additionally, an FAQ covering details of this Warranty Enhancement Program is enclosed for your reference.

Follow the Repair Procedure in this bulletin to address this condition.

L-SB-0021-14. * Applicability has been updated to include applicable 2018 models and 2016 * 2018 model year RC 300 and 2015 * 2018 model year RC 350 vehicles. * Applicability has been updated to exclude 2001 - 2003 model year ES 300 vehicles. Service Bulletin No. L-SB-0021-14 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines the use of TIS and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Lexus term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ECU is used as a generic label for the following SAE J1930 standard references: * Powertrain Control Module (PCM) * Engine Control Module (ECM) * Transmission Control Module (TCM) * Any other Lexus-specific control unit

VVT-I actuator may degrade over time. This condition may cause oil to leak from the VVT-I oil hose producing abnormal engine noise and the oil pressure light to illuminate. The following information is provided to inform you and your staff of the owner notification phase of the campaign and your degree of involvement. Additional information may be found in the attached Lexus Q&A and customer notification letter.

VVT-I actuator may degrade over time. This condition may cause oil to leak from the VVT-I oil hose producing abnormal engine noise and the oil pressure light to illuminate. The following vital information is provided to inform you and your staff of the dealer and owner notification phase of the campaign and your degree of involvement. Additional information may be found in the attached Lexus Q&A and customer notification letter.

REFER TO THE PROCEDURES FOR REPAIR. *LJ

*LJ

VVT-I ACTUATOR, WITH RUBBER PORTION OF OIL SUPPLY HOSE, WILL DEGRADE OVER TIME DUE TO OIL LEAKING FROM VVT-I HOSE, CAUSING OIL PRESSURE LIGHT TO ILLUMINATE AND ABNORMAL NOISE FROM ENGINE. MODEL 2007-2009 RX 350, 2007-2008 ES 350. *PE

THERE IS A SEEPAGE OR OIL LEAKAGE ON SOME VEHICLES, COMING FROM THE ENGINE OIL COOLER PIPE THAT IS COVERED BY THE LIMITED WARRANTY ENHANCEMENT PROGRAM. MODEL 2007-2011 RX 350, 2010-2011 RX 450H. *PE

*PE

THE NOISE CAN BE DUPLICATED WHEN LIGHTLY ACCELERATION AND THEN DECELERATING, OR WHEN DEPRESSING THE BRAKE PEDAL WITH THE SHIFT LEVER IN PARK AND THEN RELEASING THE BRAKE PEDAL. AN IMPROVED VACUUM CHECK VALVE IS NOW AVAILABLE TO REDUCE THIS NOISE. MODELS RX330/350. *PE

P0355, OR P0356 (IGNITION COIL PRIMARY/SECONDARY CIRCUIT) STORED IN THE ENGINE CONTROLMODULE/ECM (SAE TERM-POWERTRAIN CONTROL MODULE/PCM). MODELS INCLUDE ES35 AND RX350. *PE

ENGINE MECHANICAL. *PE

SOME VEHICLES MAY EXHIBIT A MIL ON DIAGNOSTIC TROUBLE CODE (DTC) P0138 AND/OR P0158 (OXYGEN SENSOR CIRCUIT HIGH VOLTAGE BANK 1 OR 2). IN SOME INSTANCES A P2195 OR 02197 (A/F SENSOR SIGNAL STUCK LEAN) DTC MAY ALSO BE PRESENT. CAUSED BY INCORRECT AIR FUEL RATIO SENSOR RESPONSE. *PE UPDATED 6 /28/10. *PE

Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.

Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.

Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.

Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.

Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.

be involved.

Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).

sticky/melting dashboards as a result of heat or humidity.

performance.

STICKY/MELTING DASHBOARDS AS A RESULT OF HEAT OR HUMIDITY.

IN MID-DECEMBER, 2014 LEXUS ANNOUNCED THE REIMBURSEMENT PHASE OF THIS WARRANTY ENHANCEMENT PROGRAM. SINCE THIS ANNOUNCEMENT, LEXUS HAS BEEN DILIGENTLY MAKING PARTS PREPARATIONS FOR THE PARTS REPLACEMENT PHASE OF THIS PROGRAM. DUE TO THE AGE, VOLUME, AND BREADTH OF THE COVERED VEHICLES INVOLVED IN THE PROGRAM, AND THE SIZE AND COMPLEXITY OF DASHBOARD MANUFACTURING, LEXUS WILL BE LAUNCHING THE PART REPLACEMENT PORTION OF THIS PROGRAM IN SEVERAL PHASES; PLEASE REFER TO THE TABLE BELOW FOR PART REPLACEMENT MODEL PHASING.

*NJ

converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing washers can cause damage to the torque converter assembly. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.

assembly to avoid MIL "ON" shifting issues and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.

remanufactured automatic transmissions.

mileage between scheduled maintenance checks. Here are some important tips when working with ATF-WS in Lexus vehicles requiring its use.

automatic transmissions.

MODELS 2004-2009 RX330, RX350. *PE

*RM

SOME VEHICLES MAY EXPERIENCE MULTIPLE WARNING LIGHTS ILLUMINATED, VEHICLE NOT SHIFTING FROM PARK TO DRIVE, AND OTHER ACCESSORIES BECOMING INOPERATIVE AFTER THE VEHICLE HAS COLD SOAKED IN SUB FREEZING (BELOW 14 %F [-10%C]) AMBIENT AIR TEMPERATURES. A NEW RELAY AND WIRE HARNESS HAS BEEN MADE AVAILABLE TO IMPROVE THIS CONDITION. *PE

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprograming process and outlines use of the TIS and the CUW.

damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.

The Repair Procedure section, Required Tools & Equipment section, and the Repair Procedure section has been updated. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.

damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.

damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU's information.

MODELS 2001-13 CT200H, ES300, 300H, 330, 350, GS300, 350, 450, 450H, 460, GX460, 470, HS250H, IS F, IS250, 250C, 350, 350C, LFA, LS430, 460, 600H, LX470, 570, RX330, 350, 400H, 450H, SC430. *PE

FLASH REPROGRAMMING ALLOWS THE ECU SOFTWARE TO BE UPDATED WITHOUT REPLACING THE ECU. FLASH CALIBRATION UPDATES FOR SPECIFIC VEHICLE MODELS/ECUS ARE RELEASED AS FIELD FIX PROCEDURES DESCRIBED IN INDIVIDUAL SERVICE BULLETINS. *PE

This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.

This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.

Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. These concerns can be caused by changes made on the customer's phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or they have restore their phone data/settings recently.

Conditions typically experienced include inability to pair the iPhone to the system, poor sound quality during phone calls placed through the audio/navigation system, and the inability to place a hands free phone call using the audio/navigation system.

Conditions typically experienced include inability to pair the iPhone to the system, poor sound quality during phone calls placed through the audio/navigation system, and the inability to place a hands free phone call using the audio/navigation system.

Conditions typically experienced include inability to pair the iPhone to the system, poor sound quality during phone calls placed through the audio/navigation system, and the inability to place a hands free phone call using the audio/navigation system.

ST004-01, SU001-08, and L-SB-0174-08. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding. This Service Bulletin provides best practice procedures for vehicle pulling complaint, diagnosis, and repair for 2002 ? 2021 model year Lexus vehicles. This information supplements Repair Manual procedures when the symptoms are: ?Vehicle Pulling: The vehicle moves to the right or left when the driver holds the steering wheel while driving straight ahead without exerting steering effort. ?Steering Wheel Off Center: The vehicle travels straight, but the steering wheel is not pointed straight ahead. The vehicle is not pulling. Before repairing a vehicle pulling to one side, it is necessary to clearly identify the cause of the pulling condition. Frequently, pulling to one side is diagnosed as a wheel alignment concern. However, the actual cause may be related to the lateral force generated by the tires, vehicle damage, road crown or worn components. Performing a wheel alignment when tire force is the cause could result in the wheel alignment being set at a value outside of specifications. This could then cause other problems such as uneven tire wear, etc. A customer may notice a pull to the left when in the left lanes of travel and notice a pull to the right or no pull when traveling in the right lanes of travel on the very same section of roadway. This road crown effect is environmental and cannot be corrected with suspension adjustments or any other wheel or tire modification discussed in this bulletin.

turned very little from side-to-side.

serviceability and reduce ownership cost. This repair procedure only applies to vehicles where the steering rack leak is originating from the right (passenger) side and is the OEM steering rack assembly.

Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. Various Bluetooth Audio functions are no longer functioning with the customer's phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer's phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or they have restored their phone data/settings recently.

Bluetooth failure to connect to the vehicle when first turning on the vehicle, Various Bluetooth Audio functions are no longer functioning with the customer's phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer's phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or they have restored their phone data/settings recently.

Bluetooth failure to connect to the vehicle when first turning on the vehicle, Various Bluetooth Audio functions are no longer functioning with the customer's phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer's phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or they have restored their phone data/settings recently.

INTERMITTENT BLUETOOTH FAILURE TO CONNECT TO THE VEHICLE WHEN FIRST TURNING ON THE VEHICLE. VARIOUS BLUETOOTH AUDIO FUNCTIONS ARE NO LONGER FUNCTIONING WITH THE CUSTOMER'S PHONE SUCH AS ABILITY TO CHANGE THE TRACK USING THE STEERING WHEEL CONTROLS. THESE CONCERNS CAN BE CAUSED BY CHANGES MADE ON THE CUSTOMER'S PHONE. MAKE SURE TO INQUIRE WITH THE CUSTOMER IF THE CONNECTIVITY CONCERNS OCCURRED AFTER RECEIVING AN OPERATING SYSTEM UPDATE ON THEIR PHONE OR THEY HAVE RESTORED THEIR PHONE DATA/SETTINGS RECENTLY.

As communicated on December 3, 2013, Lexus has launched a warranty enhancement program to extend warranty coverage for headlamp housing assemblies on 2004 through 2009 model year RX vehicles. Lexus has received reports indicating excess moisture can form on the interior of the headlamp housing, in these vehicles. This cosmetic condition is addressed by replacing the affected headlamp housing.

condition where excess moisture forms on the interior of the headlamp housing. Examples of excess moisture are: * Pooling of water at the bottom of the headlamp that do not clear with normal use of the vehicle in dry weather conditions. * Noticeable streaks of water that run down the interior of the headlamp lenses that do not clear with normal use of the vehicle in dry weather conditions. To address the excess moisture condition of the headlamp, an improved headlamp housing has been developed. Use the following repair information to replace the headlamp housing as necessary.

condition where excess moisture forms on the interior of the headlamp housing. Examples of excess moisture are: ? Pooling of water at the bottom of the headlamp that do not clear with normal use of the vehicle in dry weather conditions. ? Noticeable streaks of water that run down the interior of the headlamp lenses that do not clear with normal use of the vehicle in dry weather conditions.To address the excess moisture condition of the headlamp, an improved headlamp housing has been developed. Use the following repair information to replace the headlamp housing as necessary.

*RM

Follow the Repair Procedure in this bulletin to address this condition.

becomes cracked and/or has a shiny/degraded appearance. The dashboard surface may also become sticky or adherent. Follow the procedures in this bulletin to address this condition.

equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the Brake Pedal Force Gauge. Refer to the appropriate Repair Manual for parking brake pedal travel inspection and adjustment specification.

becomes cracked and/or has a shiny/degraded appearance. The dashboard surface may also become sticky or adherent. Follow the procedures in this bulletin to address this condition.

reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pretensioner devices did not per

Lexus does NOT recommend replacement of original seat covers with non-Lexus leather or other seat cover materials on vehicles due to the following: Seat covers NOT recommended by Lexus may affect side airbag performance, in general or in part, during an accident. Modifications that negatively affect side airbag performance can result in severe occupant injuries. Seat covers are an integral part of this safety system. Replacing fabric seat covers with non-Lexus leather or other seat cover materials may compromise the effectiveness of this safety system. The design of the seat is complex, integrating safety and strength with comfort and luxury. Lexus strongly discourages modifying original equipment seats that have optional side airbags. Additionally, Lexus strongly advises against the installation or use of aftermarket seat covers, which could impair the performance of the side airbags in the event of an accident.

seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pre-tensioner devices did not perform as expected (including an unintended deployment event), please follow the steps in the recommendations section below.

NEGATIVELY AFFECT SIDE AIR BAG PERFORMANCE CAN RESULT IN SEVERE INJURIES. *PE

This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Lexus.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.

The quick reference chart is applicable to current generation vehicles only.

WARRANTY" AS IT APPLIES TO THE DASHBOARD. THE SPECIFIC CONDITION COVERED BY THIS PROGRAM IS ANY CRACKED AND/OR STICKY/MELTED DASHBOARD AS A RESULT OF HEAT OR HUMIDITY FOR ANY COVERED VEHICLE. IF THE CONDITION IS VERIFIED, THE REPAIR WILL BE PERFORMED IN ACCORDANCE WITH THE APPLICABLE TSB UNDER THE TERMS OF THIS WARRANTY ENHANCEMENT PROGRAM.

consolidated Economic L:oss Class Actions relating to claims of unintended acceleration. The new (continued) date for Fairness Hearing is July 19,2013. After the hearing TMS will provide further updates on the status and timing of the settlement.