Powered byNHTSA|EPA|Community Reports|Updated
HomeTSBsLexus2011 RX330

2011 Lexus RX330 TSBs

30 Technical Service Bulletins across 12 categories

Other

9 bulletins
10205359

Oil Viscosity Applicability and Cfhange Interval Guide

10205358

Oil Viscosity Applicability and Cfhange Interval Guide

10205331

Immobilizer and Smart Key Reset

10205330

Immobilizer and Smart Key Reset

10205329

Immobilizer and Smart Key Reset.

10174889

OBSOLETE NOTICE April 06, 2020: This bulletin is now obsolete.

Read full bulletin

Please see L-SB-0008-20. Replacement Certification Labels and VIN Plates

10129210

OBSOLETE NOTICE January 22, 2018: This bulletin is now obsolete.

Read full bulletin

Please see L-SB-0001-18.

10060809

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

10060743

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Pre-Delivery & Maintenance

4 bulletins
10214355

Lexus Safety Recall and Service Campaign - Technician Certification Requirements 4.13.2022

10190468

Lexus Safety Recall and Service Campaign - Technician Certification Requirements

10179782

TI: TECHNICAL INSTRUCTIONS FOR LIMITED SERVICE CAMPAIGN KLG CUSTOMER SUPPORT PROGRAM 19LE05 SAFETY CONNECT SYSTEM ?...

Read full bulletin

VEHICLE LOCATION INACCURATE

10176283

Safety Recall and Service Campaign - Technician Certification Requirements

Body & Paint

4 bulletins
10209023

Some 2005 ? 2022 model year Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present.

Read full bulletin

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.

10205383

Spots in Window Glass - vehicle exterior

10205352

Windshield Wiper Blade Maintenance and cleaning

10174888

SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos.

Read full bulletin

L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, PG002-90, L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003 93, and PG002-90. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1990 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin.

Electrical

2 bulletins
10205327

Techstream ECU Flash Reprogramming Procedure.

10132625

Revision Notice: Applicability section has been updated to include 2016-2017 applicable model year Lexus vehicles.

Read full bulletin

The Repair Procedure section, Required Tools & Equipment section, and the Repair Procedure section has been updated. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.

Infotainment

2 bulletins
10179697

Vehicles may display evidence of a fluid leak or fluid seep from powertrain components.

Read full bulletin

This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.

10179601

Vehicles may display evidence of a fluid leak or fluid seep from powertrain components.

Read full bulletin

This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.

Engine

2 bulletins
10132855

Some RX 330/350 vehicles may exhibit a rattle or buzz type noise coming from the driver?s side instrument panel area.

Read full bulletin

The noise can be duplicated when lightly accelerating and then decelerating, or when depressing the brake pedal with the shift lever in Park and then releasing the brake pedal. An improved vacuum check valve is now available to reduce this noise.

10131726

SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No.

Read full bulletin

L-SB-0021-14. * Applicability has been updated to include applicable 2018 models and 2016 * 2018 model year RC 300 and 2015 * 2018 model year RC 350 vehicles. * Applicability has been updated to exclude 2001 - 2003 model year ES 300 vehicles. Service Bulletin No. L-SB-0021-14 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines the use of TIS and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Lexus term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ECU is used as a generic label for the following SAE J1930 standard references: * Powertrain Control Module (PCM) * Engine Control Module (ECM) * Transmission Control Module (TCM) * Any other Lexus-specific control unit

Air Bags & Safety

2 bulletins
10132074

Beginning in 1998, Lexus introduced side airbags as optional equipment.

Read full bulletin

Lexus does NOT recommend replacement of original seat covers with non-Lexus leather or other seat cover materials on vehicles due to the following: Seat covers NOT recommended by Lexus may affect side airbag performance, in general or in part, during an accident. Modifications that negatively affect side airbag performance can result in severe occupant injuries. Seat covers are an integral part of this safety system. Replacing fabric seat covers with non-Lexus leather or other seat cover materials may compromise the effectiveness of this safety system. The design of the seat is complex, integrating safety and strength with comfort and luxury. Lexus strongly discourages modifying original equipment seats that have optional side airbags. Additionally, Lexus strongly advises against the installation or use of aftermarket seat covers, which could impair the performance of the side airbags in the event of an accident.

10054797

LEXUS: INFORMATION REGARDING THE SEAT COVER REPLACEMENT, EQUIPPED WITH SIDE AIR BAGS, THE MODIFICATIONS THAT MIGHT...

Read full bulletin

NEGATIVELY AFFECT SIDE AIR BAG PERFORMANCE CAN RESULT IN SEVERE INJURIES. *PE

Tires & Wheels

1 bulletin
10207945

POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Lexus.

Read full bulletin

This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Lexus.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.

Transmission

1 bulletin
10205346

Auto matic Transmission Replacement kPrecautions

Brakes

1 bulletin
10205319

Brake Pedal Force Gauge SST for Parking Brake Inspection.

Steering

1 bulletin
10177780

SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos.

Read full bulletin

ST004-01, SU001-08, and L-SB-0174-08. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding. This Service Bulletin provides best practice procedures for vehicle pulling complaint, diagnosis, and repair for 2002 ? 2021 model year Lexus vehicles. This information supplements Repair Manual procedures when the symptoms are: ?Vehicle Pulling: The vehicle moves to the right or left when the driver holds the steering wheel while driving straight ahead without exerting steering effort. ?Steering Wheel Off Center: The vehicle travels straight, but the steering wheel is not pointed straight ahead. The vehicle is not pulling. Before repairing a vehicle pulling to one side, it is necessary to clearly identify the cause of the pulling condition. Frequently, pulling to one side is diagnosed as a wheel alignment concern. However, the actual cause may be related to the lateral force generated by the tires, vehicle damage, road crown or worn components. Performing a wheel alignment when tire force is the cause could result in the wheel alignment being set at a value outside of specifications. This could then cause other problems such as uneven tire wear, etc. A customer may notice a pull to the left when in the left lanes of travel and notice a pull to the right or no pull when traveling in the right lanes of travel on the very same section of roadway. This road crown effect is environmental and cannot be corrected with suspension adjustments or any other wheel or tire modification discussed in this bulletin.

Hybrid & EV

1 bulletin
10168534

Technical Instructions: TECHNICAL INSTRUCTIONS FOR LIMITED SERVICE CAMPAIGN KLG CUSTOMER SUPPORT PROGRAM 19LE05 SAFETY...

Read full bulletin

CONNECT SYSTEM ? VEHICLE LOCATION INACCURATE CERTAIN 2011 ? 2017 MODEL YEAR LS, 2013 ? 2016 MODEL YEAR LS Hybrid, 2011 ? 2017 MODEL YEAR GS, 2016 ? 2017 MODEL YEAR GS-F, 2013 ? 2017 MODEL YEAR GS Hybrid, 2010 ? 2017 MODEL YEAR IS, 2011 ? 2015 MODEL YEAR IS-C, 2013 ? 2014 MODEL YEAR IS-F, 2015 ? 2017 MODEL YEAR RC, 2015 ? 2017 MODEL YEAR RC-F, 2011 ? 2017 MODEL YEAR CT, 2010 ? 2017 MODEL YEAR RX, 2010 ? 2017 MODEL YEAR RX Hybrid, 2015 ? 2017 MODEL YEAR NX, 2015 ? 2017 MODEL YEAR NX Hybrid, 2010 ? 2017 MODEL YEAR LX, 2010 ? 2018 MODEL YEAR GX, 2010 ? 2017 MODEL YEAR ES, 2013 ? 2017 MODEL YEAR ES Hybrid Updated 10/17/2019