2024 Lexus Rx TSBs

may exhibit a condition where the Blind Spot Monitor (BSM) system is inoperative, there is a BSM malfunction message on the multi-information display (MID), or the driving assist information indicator is illuminated, along with one or more of the following Diagnostic Trouble Codes (DTCs) present: C1AB413 Outer Mirror Indicator (Module "B" Side) Circuit Open C1AB513 Outer Mirror Indicator (Module "A" Side) Circuit Open The BSM sensor software has been updated to reduce the possibility of these conditions.

may exhibit a condition where the Blind Spot Monitor (BSM) system is inoperative, there is a BSM malfunction message on the multi-information display (MID), or the driving assist information indicator is illuminated, along with one or more of the following Diagnostic Trouble Codes (DTCs) present: C1AB413 Outer Mirror Indicator (Module "B" Side) Circuit Open C1AB513 Outer Mirror Indicator (Module "A" Side) Circuit Open The BSM sensor software has been updated to reduce the possibility of these conditions.

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.

configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column has been added to the GTS+ Health Check Results screen to show when configuration software is available for a specific ECU.

The GTS+ Software Health Check Results screen has been enhanced to help identify if a replacement ECU requires an ECU Security Key.

equipped with Lexus Multimedia (version 1020 or earlier). This update provides improved performance and capability for the following: User Profile configuration and display. Cloud Navigation and Intelligent Voice Assistant. Mobile device connectivity. On-screen display and system settings/configuration. Security enhancements. A head unit software update is now available for 2022 LX 600, NX 250, NX 350, NX 350h, and NX 450h+ vehicles equipped with Lexus Multimedia (earlier than version 1040). This software update includes the following improvements: Cloud navigation. Intelligent assistant voice recognition. Showing and controlling explicit audio content. User interface. Bluetooth. Bug fixes. This software update removes the following feature: Hybrid radio. A head unit software update is now available for 2023 model year LX 600, NX 250, NX 350, NX 350h, and NX 450h+ vehicles equipped with Lexus Multimedia (version 1040 or earlier). This software update provides improved performance and capability for the following: User Profile. Over-the-air (OTA) notifications. Ability to search during a call. Bug fixes settings/configuration. Security enhancements. A head unit software update is now available for 2022 2023 model year LX 600 vehicles; 2023 2024 model year RX 350, RX 350h, RX 450h+, and RX 500h vehicles; 2022 2024 model year NX 250, NX 350, NX 350h, and NX 450h+ vehicles; 2023 model RZ 450e vehicles equipped with Lexus Multimedia (earlier than version 2050). This software update includes the following improvements: User interface design. Intelligent assistant. Navigation lane guidance. Phone book search. Bug fixes. A head unit software update is now available for 2022 2024 model year LX 600, NX 250, NX 350, NX 350h, and NX 450h+ vehicles; 2023 2024 model year RX 350, RX 350h, RX 450h+, RX 500h, and RZ 450e vehicles; 2024 model year TX 350, TX 500h, and TX 550h+ vehicles equipped with Lexus Multimedia (earlier than version 2170). This software update includes the following improvements: User Profile. User interface. Cloud navigation. Intelligent assistant voice recognition. Bug fixes.

1. Refer to the TAS 21MM Diagnostics Pre-Call Worksheet (PCW) on the TAS case creation page. The following steps will provide some answers for the PCW. 2. Start with the vehicle running outside for 5-10 minutes in an area with no overhead obstructions. a. Enter the radio Service Menu (diagnostic mode) using Techstream or GTS+, or the manual swiping method as outlined in the Repair Manual. b. Once the Service Menu is shown, the Function Check/Setting, and Product information buttons will be used. 3. Select the Product Information button to display radio and DCM registration details. 4. Accurate GNSS Date and Time is needed for the QR code to work. From the Service Menu select Function Check/Setting > System Sensors Check to display GNSS details.

configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column has been added to the GTS+ Health Check Results screen to show when configuration software is available for a specific ECU. REVISION NOTICE April 18, 2024 Rev1: Applicability has been updated to include 2024 model year GX 550, LX 600, NX 250, NX 350, NX 350h, NX 450h+, RX 350, RX 350h, RX 450h+, RX 500h, RZ 300e, RZ 450e, TX 350, TX 500h, and TX 550h+ vehicles. The Introduction section has been updated. The Operation Procedure section has been removed. The Standard ECU Configuration Procedure and ECU Configuration Value Writing Procedure sections have been added.

The GTS+ Software Health Check Results screen has been enhanced to help identify if a replacement ECU requires an ECU Security Key. REVISION NOTICE April 11, 2024 Rev1: Applicability has been updated to include 2023 2024 model year LS 500, LS 500h, LX 600, NX 250, NX 350, NX 350h, NX 450h+, RX 350, RX 350h, RX 450h+, RX 500h, and RZ 450e and 2024 model year RZ 300e, TX 350, TX 500h, and TX 550h+ vehicles. The entire bulletin has been updated to represent GTS+ Software.

1. Refer to the TAS 21MM Diagnostics Pre-Call Worksheet (PCW) on the TAS case creation page. The following steps will provide some answers for the PCW. 2. Start with the vehicle running outside for 5-10 minutes in an area with no overhead obstructions. a. Enter the radio Service Menu (diagnostic mode) using Techstream or GTS+, or the manual swiping method as outlined in the Repair Manual. b. Once the Service Menu is shown, the Function Check/Setting, and Product information buttons will be used. 3. Select the Product Information button to display radio and DCM registration details. 4. Accurate GNSS Date and Time is needed for the QR code to work. From the Service Menu select Function Check/Setting > System Sensors Check to display GNSS details.

configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column has been added to the GTS+ Health Check Results screen to show when configuration software is available for a specific ECU. REVISION NOTICE April 18, 2024 Rev1: Applicability has been updated to include 2024 model year GX 550, LX 600, NX 250, NX 350, NX 350h, NX 450h+, RX 350, RX 350h, RX 450h+, RX 500h, RZ 300e, RZ 450e, TX 350, TX 500h, and TX 550h+ vehicles. The Introduction section has been updated. The Operation Procedure section has been removed. The Standard ECU Configuration Procedure and ECU Configuration Value Writing Procedure sections have been added.

The GTS+ Software Health Check Results screen has been enhanced to help identify if a replacement ECU requires an ECU Security Key. REVISION NOTICE April 11, 2024 Rev1: Applicability has been updated to include 2023 2024 model year LS 500, LS 500h, LX 600, NX 250, NX 350, NX 350h, NX 450h+, RX 350, RX 350h, RX 450h+, RX 500h, and RZ 450e and 2024 model year RZ 300e, TX 350, TX 500h, and TX 550h+ vehicles. The entire bulletin has been updated to represent GTS+ Software.

vehicles equipped with Lexus Multimedia (version 1020 or earlier). This update provides improved performance and capability for the following: ?User profile configuration and display. ?Cloud Navigation and Intelligent Voice Assistant. ?Mobile device connectivity. ?On-screen display and system settings/configuration. ?Security enhancements. A head unit software update is now available for 2022 LX 600, NX 250, NX 350, NX 350h, and NX 450h+ vehicles; and 2023 ES 250, ES 300h, ES 350, and UX 250h vehicles equipped with Lexus Multimedia (earlier than version 1040). This software update includes the following improvements: ?Cloud navigation. ?Intelligent assistant voice recognition. ?Showing and controlling explicit audio content. ?User interface. ?Bluetooth. ?Bug fixes. This software update removes the following feature: ?Hybrid radio. A head unit software update is now available for 2023 model year LX 600, NX 250, NX 350, NX 350h, and NX 450h+ vehicles equipped with Lexus Multimedia (version 1040 or earlier). This software update provides improved performance and capability for the following: ?User profile. ?Over-the-air (OTA) notifications. ?Ability to search during a call. ?Bug fixes settings/configuration. ?Security enhancements. A head unit software update is now available for 2022 ? 2023 model year LX 600 vehicles; 2023 ? 2024 model year ES 250, ES 300h, ES 350, RX 350, RX 350h, RX 450h+, RX 500h, and UX 250h vehicles; 2022 ? 2024 model year NX 250, NX 350, NX 350h, and NX 450h+ vehicles; 2023 model year LS 500 and LS 500h vehicles; 2024 model year LC 500, LC 500C, and LC 500h vehicles equipped with Lexus Multimedia (earlier than version 2050). This software update includes the following improvements: ?User interface design. ?Intelligent assistant. ?Navigation lane guidance. ?Phone book se

?Auxiliary (12V) battery If the hybrid vehicle or battery electric vehicle is placed into storage, the State-Of-Charge (SOC) of its HV battery and auxiliary battery will gradually decrease. To prevent the auxiliary battery from becoming discharged during storage, proper maintenance is necessary. Perform the following maintenance service for the HV battery and auxiliary battery.

In addition, some models may also utilize retaining hooks (clips) for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the Installation Procedure in this bulletin to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retaining hooks (clips).

These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Lexus does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should test the auxiliary (12V) battery and recharge, if necessary, no more than 48 hours before delivery to the customer.

In addition, some models may also utilize retaining hooks (clips) for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the Installation Procedure in this bulletin to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retaining hooks (clips).

?Auxiliary (12V) battery If the hybrid vehicle or battery electric vehicle is placed into storage, the State-Of-Charge (SOC) of its HV battery and auxiliary battery will gradually decrease. To prevent the auxiliary battery from becoming discharged during storage, proper maintenance is necessary. Perform the following maintenance service for the HV battery and auxiliary battery.

These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Lexus does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should test the auxiliary (12V) battery and recharge, if necessary, no more than 48 hours before delivery to the customer.

In addition, some models may also utilize retaining hooks (clips) for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the Installation Procedure in this bulletin to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retaining hooks (clips).

These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Lexus does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should test the auxiliary (12V) battery and recharge, if necessary, no more than 48 hours before delivery to the customer.

These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features.

Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.

Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.

Questions

October 2022 due to global semiconductor shortages impacting certain microchips. Affected vehicles have been delivered with only one Smart Key and a second mechanical key.

semiconductor shortage impacting certain microchips. The affected vehicles were delivered with one (1) Smart Key and a second mechanical key.

semiconductor shortage impacting certain microchips. The affected vehicles were delivered with one (1) Smart Key and a second mechanical key.

October 2022 due to global semiconductor shortages impacting certain microchips. Affected vehicles have been delivered with only one Smart Key and a second mechanical key.

October 2022 due to global semiconductor shortages impacting certain microchips. Affected vehicles have been delivered with only one Smart Key and a second mechanical key.

semiconductor shortage impacting certain microchips. The affected vehicles were delivered with one (1) Smart Key and a second mechanical key.

semiconductor shortage impacting certain microchips. The affected vehicles were delivered with one (1) Smart Key and a second mechanical key.

October 2022 due to global semiconductor shortages impacting certain microchips. Affected vehicles have been delivered with only one Smart Key and a second mechanical key.

semiconductor shortage impacting certain microchips. The affected vehicles were delivered with one (1) Smart Key and a second mechanical key.

These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features.

recommendations

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.

The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk.

The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk.

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.

where the instrument panel garnish trim located above the glove box becomes loose/detached from the instrument panel dashboard. This condition is more prevalent in warmer/rough terrain regions due to inadequate retention of the garnish clips.

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.

where the instrument panel garnish trim located above the glove box becomes loose/detached from the instrument panel dashboard. This condition is more prevalent in warmer/rough terrain regions due to inadequate retention of the garnish clips.

If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. The entire bulletin has been updated.

wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.

where the instrument panel garnish trim located above the glove box becomes loose/detached from the instrument panel dashboard. This condition is more prevalent in warmer/rough terrain regions due to inadequate retention of the garnish clips

If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. The entire bulletin has been updated.

wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.

where the instrument panel garnish trim located above the glove box becomes loose/detached from the instrument panel dashboard. This condition is more prevalent in warmer/rough terrain regions due to inadequate retention of the garnish clips

rotational clicking noise from one or both front drive shaft assemblies when accelerating while making turns. This condition may occur without a grease leak present on the front drive shaft assemblies. An updated front drive shaft assembly is available to resolve this condition.

This table will be updated over time as more details become available.

drive shaft assemblies when accelerating while making turns. This condition may occur without a grease leak present on the front drive shaft assemblies. An updated front drive shaft assembly is available to resolve this condition.

This table will be updated over time as more details become available.

This table will be updated over time as more details become available.

This table will be updated over time as more details become available.

This table will be updated over time as more details become available.

This table will be updated over time as more details become available.

This table will be updated over time as more details become available.

This table will be updated over time as more details become available.

This table will be updated during each phase launch and as more details become available.

Trouble Code (DTC) P019064 (Fuel Rail Pressure Sensor A Signal Plausibility Failure) present. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to address this condition.

Mud, water, or road salt could potentially enter the HV Floor Under Wire connector housing and could cause corrosion over time. Excessive corrosion could cause AM Radio Static during certain driving cycles, or the vehicle may not start.

following conditions at vehicle startup: A Shift System Malfunction message on the Multi-information Display (MID), as shown below. Battery voltage drops below 10V. These conditions are more likely to occur when the outside temperatures are near freezing. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of these conditions.

following conditions at vehicle startup: A Shift System Malfunction message on the Multi-information Display (MID), as shown below. Battery voltage drops below 10V. These conditions are more likely to occur when the outside temperatures are near freezing. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of these conditions.

Communication with ECM/PCM "A" Missing Message. Upon investigation, it is found that the engine ECU has been damage and needs to be replaced. In several cases, the cause of the ECU damage was improper jump starting. Further investigation found that ECU damage may occur if the negative (ground) cable clamps are attached on or around the engine ECU or mounting bracket. To prevent this condition from occurring, it is recommended that the jumper cables be attached as described in the owners manual.

high-pitched noise coming from the front HVAC blower motor while operating the air conditioner or heater. This condition does not affect the operation of the vehicle, however, a heater cover has been developed to help reduce or potentially eliminate the noise.

locking pin to temporarily get stuck. When this happens, an engine malfunction indicator lamp (MIL) can appear on the dashboard as well as diagnostic trouble code (DTC), P05CE00 to be set.

locking pin to temporarily get stuck. When this happens, an engine malfunction indicator lamp (MIL) can appear on the dashboard as well as diagnostic trouble code (DTC), P05CE00 to be set.

locking pin to temporarily get stuck. When this happens, an engine malfunction indicator lamp (MIL) can appear on the dashboard as well as diagnostic trouble code (DTC), P05CE00 to be set.

rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete

rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete

The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.

The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.

The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.

The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.

The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.

LG-N210ee9999-09 may exhibit a condition in which the vehicle customize settings menu is unavailable in the head unit after connecting to Techstream. Some 2023 model year ES 250, ES 350, LS 500, LS 500h, RX 350, RX 350h, RX 500h, and RZ 450e vehicles, and 2023 2024 model year ES 300h and UX 250h vehicles with DCM firmware versions earlier than LG-N210jj3333-09, LG-N210nn1212-09, LG-N310kk4646-0I, LG-N310ll4A4A-0I, LG-N310mm8A8A-0I, LG-N310nnBLBM-0I, or LG-N310oo1B1B-0I may exhibit a condition in which remote services are inoperative. Some 2023 model year ES 250, ES 350, LS 500, LS 500h, and RZ 450e vehicles, 2023 2024 model year RX 350, RX 350h, RX 450h+, and RX 500h vehicles, 2024 model year GX 550, LC 500c, and UX 250h vehicles; and 2023 2025 model year ES 300h vehicles with DCM firmware versions earlier than LG-N210qq####-##, or LG-N310qq####-##, may exhibit a condition in which Apple Music or Amazon Music streaming and/or remote services are inoperative. A DCM firmware update is now available.

navigation display screen

If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Follow the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle.

If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Follow the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle.

If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation.

The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.

Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks.

SOFTWARE UPDATE CERTAIN 2023-2024 NX 350 VEHICLES CERTAIN 2023-2024 RX350 VEHICLES CERTAIN 2024 TX 350 VEHICLES

SOFTWARE UPDATE CERTAIN 2023-2024 NX 350 VEHICLES CERTAIN 2023-2024 RX350 VEHICLES CERTAIN 2024 TX 350 VEHICLES

Trouble Code (DTC) P279762 (Electromagnetic Oil Pump Component Internal Failure) present. The Transmission Control Module (TCM) logic has been modified to reduce the possibility of this condition

Trouble Code (DTC) P279762 (Electromagnetic Oil Pump Component Internal Failure) present. The Transmission Control Module (TCM) logic has been modified to reduce the possibility of this condition

The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

If non-compatible wheels or hub bolts/nuts are installed, there is increased risk that the wheel(s) could come off resulting in a crash. This service bulletin outlines the physical differences and precautions that should be taken when servicing different wheel and wheel fastener types.