2019 Lexus Rc 350 TSBs

Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the expiration date of the dynamic subscription (stored in the head unit), must be checked. If the expiration date has not passed, a license key may be generated without the purchase of an activation card number (ACN). Updating the map without the use of an ACN is considered an Embedded Navigation Update (refer to pg. 10) and performing this update does not extend the subscription to dynamic map services. If the subscription period has expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an ACN. Utilizing an ACN, will initiate the Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the embedded navigation update and provide dynamic map services for a period of two years from the date that the Dynamic Navigation Update is performed. ACNs are provided in a pamphlet available through the normal parts ordering system

earlier may exhibit one or more of the following conditions: ?Apple CarPlay intermittently inoperative. ?Voice recognition does not start when ?Waiting for the beep? is displayed. ?Audio does not resume after listening to a voicemail. ?Abnormal screen appearance during Apple CarPlay. ?Voice recognition inoperative when connecting a device for Projection mode. ?After ACC OFF/ON the music will resume and pause when using Apple CarPlay. ?Music information is incorrect when using Spotify via Bluetooth Audio Mode. ?Apple CarPlay does not start after connecting phone and selecting Projection mode. ?CD source sub-screen is not displayed. Some 2018 ? 2020 model year Lexus vehicles with Panasonic navigation (version 1050) or earlier may exhibit one or more of the following conditions: ?The analog clock shows one hour ahead, then immediately adjusts back one hour after ACC ON. ?No sound and reset when playing Spotify via Bluetooth Audio. Some 2018 ? 2020 model year Lexus vehicles with Panasonic navigation (version 1030) or earlier may exhibit one or more of the following conditions: ?WiFi becomes inoperative or can not be enabled. ?Navigation reset while driving. ?Navigation shows vehicle in the wrong location. Some 2019 model year ES 300h and ES 350 vehicles with Panasonic navigation (version 1000) may exhibit one or more of the following conditions: ?No sound after an incoming Bluetooth phone call. ?Excessive severe weather alert messages. A software update is now available to address these conditions. Follow the Software Update Procedure in this bulletin to address these conditions.

Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update; however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the head unit?s expiration date must be checked. If the expiration date is still valid, a license key may be generated without the use of an activation card number. Updating the maps without the use of an activation card number is considered an Embedded Navigation Update (refer to pg. 10) and performing this process does not extend the duration of telematic map services. If the head unit?s expiration date is expired or will expire within the next 90 days, it should be recommended to the customer to purchase an activation number. Utilizing an activation number will initiate a Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the Embedded Navigation Update and provide telematic map services for a period of two years from the day that the Dynamic Navigation Update is performed. Activation card numbers are provided in an activation card number pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.

remanufactured head unit return to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by audio suppliers, FTS, and/or FPEs.

(Vehicles built after that date use AT&T WiFi, not Verizon) Head unit telematics services become inoperative after DCM replacement and activation if the guest has an ACTIVE Verizon Wi-Fi pre-paid subscription. Head unit services include Wi-Fi, Destination Assist, Dynamic Navigation, and Dynamic Voice Recognition. Verizon is not able to transfer the pre-paid subscription to the new DCM automatically. As a result, the guest is unable to use their head unit telematics services. At this time if the DCM is replaced and activated before confirming the guests Wi-Fi subscription status, this may require Verizon?s IT to perform a manual fix on the customer?s account. To simplify the diagnosis and prevent the unnecessary replacement of parts, please refer to the procedure below. NOTE: This Tech Tip does not apply if the guest is currently under their Wi-Fi trial.

more of the following conditions: ?Black CarPlay Display from Pioneer Audio. ?Low volume from CarPlay FaceTime audio calls. Some 2019 model year Lexus vehicles equipped with Pioneer Audio (version earlier than 1007) may exhibit one or more of the following conditions: ?Delayed mute operation during hands-free operation. ?XM ?No Signal? message displayed. ?Spanish translation correction. ?Voice Recognition is not canceled when receiving a call during VR operation. ?Music information does not appear. ?Automatic navigation re-routing does not occur. ?Update message does not appear via DCM. ?Cursor missing after pushing the Map button. Updated software is now available to address these conditions. Follow the Software Update Procedure in this bulletin to install the latest software version.

Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update; however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the head unit?s expiration date must be checked. If the expiration date is still valid, a license key may be generated without the use of an activation card number. Updating the maps without the use of an activation card number is considered an Embedded Navigation Update (refer to pg. 10) and performing this process does not extend the duration of telematic map services. If the head unit?s expiration date is expired or will expire within the next 90 days, it should be recommended to the customer to purchase an activation number. Utilizing an activation number will initiate a Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the Embedded Navigation Update and provide telematic map services for a period of two years from the day that the Dynamic Navigation Update is performed. Activation card numbers are provided in an activation card number pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.

The date that is shown could be more than one year in the future. This does not indicate any issues with the vehicle and is only informing the user of the expiration date.

Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update; however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the head unit?s expiration date must be checked. If the expiration date is still valid, a license key may be generated without the use of an activation card number. Updating the maps without the use of an activation card number is considered an Embedded Navigation Update (refer to pg. 10) and performing this process does not extend the duration of telematic map services. If the head unit?s expiration date is expired or will expire within the next 90 days, it should be recommended to the customer to purchase an activation number. Utilizing an activation number will initiate a Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the Embedded Navigation Update and provide telematic map services for a period of two years from the day that the Dynamic Navigation Update is performed. Activation card numbers are provided in an activation card number pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.

(Vehicles built after that date use AT&T WiFi, not Verizon) Head unit telematics services become inoperative after DCM replacement and activation if the guest has an ACTIVE Verizon Wi-Fi pre-paid subscription. Head unit services include Wi-Fi, Destination Assist, Dynamic Navigation, and Dynamic Voice Recognition. Verizon is not able to transfer the pre-paid subscription to the new DCM automatically. As a result, the guest is unable to use their head unit telematics services. At this time if the DCM is replaced and activated before confirming the guests Wi-Fi subscription status, this may require Verizon?s IT to perform a manual fix on the customer?s account. To simplify the diagnosis and prevent the unnecessary replacement of parts, please refer to the procedure below. NOTE: This Tech Tip does not apply if the guest is currently under their Wi-Fi trial.

(Vehicles built after that date use AT&T WiFi, not Verizon) Head unit telematics services become inoperative after DCM replacement and activation if the guest has an ACTIVE Verizon Wi-Fi Pre-Paid subscription. Head unit services include Wi-Fi, Destination Assist, Dynamic Navigation, and Dynamic Voice Recognition. Verizon is not able to transfer the Pre-Paid subscription to the new DCM automatically. As a result, the guest is unable to use their head unit telematics services. At this time if the DCM is replaced and activated before confirming the guests Wi-Fi subscription status, this may require Verizon?s IT to perform a manual fix on the customer?s account. To simplify the diagnosis and prevent the unnecessary replacement of parts, please refer to the procedure below. NOTE: This Tech Tip does not apply if the guest is currently under their Wi-Fi Trial.

remanufactured head unit return to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by audio suppliers, FTS, and/or FPEs.

Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update; however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the head unit?s expiration date must be checked. If the expiration date is still valid, a license key may be generated without the use of an activation card number. Updating the maps without the use of an activation card number is considered an Embedded Navigation Update (refer to pg. 10) and performing this process does not extend the duration of telematic map services. If the head unit?s expiration date is expired or will expire within the next 90 days, it should be recommended to the customer to purchase an activation number. Utilizing an activation number will initiate a Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the Embedded Navigation Update and provide telematic map services for a period of two years from the day that the Dynamic Navigation Update is performed. Activation card numbers are provided in an activation card number pamphlet available through the normal parts ordering system.

of the following conditions: ?The analog clock shows one hour ahead, then immediately adjusts back one hour after ACC ON. ?No Sound and Reset when playing Spotify via Bluetooth Audio. Some 2018 ? 2020 model year Lexus vehicles with Panasonic navigation (version 1030) or earlier may exhibit one or more of the following conditions: ?WiFi becomes inoperative/could not be enabled. ?Navigation reset while driving. ?Navigation shows vehicle in the wrong location. Some 2019 model year ES 300h and ES 350 vehicles with Panasonic navigation (version 1000) may exhibit one or more of the following conditions: ?No sound after an incoming Bluetooth phone call. ?Excessive severe weather alert messages. A software update is now available to address these conditions. Follow the Software Update Procedure in this bulletin to address these conditions.

Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update; however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the head unit?s expiration date must be checked. If the expiration date is still valid, a license key may be generated without the use of an activation card number. Updating the maps without the use of an activation card number is considered an Embedded Navigation Update (refer to pg. 10) and performing this process does not extend the duration of telematic map services. If the head unit?s expiration date is expired or will expire within the next 90 days, it should be recommended to the customer to purchase an activation number. Utilizing an activation number will initiate a Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the Embedded Navigation Update and provide telematic map services for a period of two years from the day that the Dynamic Navigation Update is performed. Activation card numbers are provided in an activation card number pamphlet available through the normal parts ordering system.

This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.

This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.

The date that is shown could be more than one year in the future. This does not indicate any issues with the vehicle, and is only informing the user of the expiration date.

Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update; however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the head unit?s expiration date must be checked. If the expiration date is still valid, a license key may be generated without the use of an activation card number. Updating the maps without the use of an activation card number is considered an Embedded Navigation Update (refer to pg. 10) and performing this process does not extend the duration of telematic map services. If the head unit?s expiration date is expired or will expire within the next 90 days, it should be recommended to the customer to purchase an activation number. Utilizing an activation number will initiate a Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the Embedded Navigation Update and provide telematic map services for a period of two years from the day that the Dynamic Navigation Update is performed. Activation card numbers are provided in an activation card number pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.

remanufactured head unit return to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by audio suppliers, FTS, and/or FPEs.

* Delayed mute operation during hands-free operation * XM "No Signal" message displayed * Spanish translation correction * Voice Recognition is not canceled when receiving a call during VR operation * Music information does not appear * Automatic navigation re-routing does not occur * Update message does not appear via DCM * Cursor missing after pushing the Map button. Updated software is now available to address these conditions. Follow the Software Update Procedure in this bulletin to install the latest software version.

version (earlier than 1025) may exhibit one or more of the following condition(s). ? Noise during Apple CarPlay voice guidance ? Siri's voice inoperative when pushing Phone icon and Push to Talk button ? Echo during Apple CarPlay call ? Apple CarPlay music delay after Siri prompt ? Apple CarPlay music does not resume after ending Destination Assist ? Display screen frozen ? Volume button stops responding ? Bluetooth connection lost after connecting USB Updated software is now available to address these conditions and add Amazon Alexa connectivity with iOS devices. Follow the Software Update Procedure in this bulletin to install the latest software version.

? Delayed mute operation during hands-free operation ? XM ?No Signal? message displayed ? Spanish translation correction ? Voice Recognition is not canceled when receiving a call during VR operation ? Music information does not appear ? Automatic navigation re-routing does not occur ? Update message does not appear via DCM ? Cursor missing after pushing the Map button Updated software is now available to address these conditions and add Amazon Alexa connectivity with iOS devices. Follow the Software Update Procedure in this bulletin to install the latest software version.

Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update; however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the head unit?s expiration date must be checked. If the expiration date is still valid, a license key may be generated without the use of an activation card number. Updating the maps without the use of an activation card number is considered an Embedded Navigation Update (refer to pg. 9), and performing this process does not extend the duration of telematic map services. If the head unit?s expiration date is expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an activation number. Utilizing an activation number will initiate a Dynamic Navigation Update (refer to pg. 3). This Dynamic Navigation Update will perform the Embedded Navigation Update and provide telematic map services for a period of two years from the day that the Dynamic Navigation Update is performed. Activation card numbers are provided in an activation card number pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update. NOTE Map data is released once each year through the shipment of an SST USB flash drive to each dealer. The SST MUST be stored in the SST cabinet to ensure it can be easily found.

1. First type is generation 6 or 7 which utilizes HDD (Hard Disc Drive). Pioneer models that begin with NXH, have map data, operating system and other information in the Hard Disc Drive. With this system if a radio is being sent back for an exchange. The original Hard Disc Drive needs to be removed and installed into the newly serviced radio.

As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.

During Pre-Delivery Service (PDS), follow the instructions contained within the Software Confirmation section of this bulletin to ensure that the software has been installed correctly. If it is found that the software is not installed correctly, proceed to the Software Installation section of this bulletin. It may also be necessary to reinstall the eOM software after replacing the head unit. Refer to the Software Confirmation section of this bulletin to determine whether or not the software is already installed. If the software is not installed, proceed to the USB Flash Drive Preparation and Software Installation sections of this bulletin.

capability of utilizing a smartphone data-driven navigation app, Scout GPS Link. Download and installation of Lexus Enform App Suite 2.0 is required to activate the Scout GPS Link app before it can be used for the first time on new vehicles. The download and installation process may also need to be performed under other circumstances, such as following a head unit replacement, or after the customer's personal settings are erased. The download and installation process requires between 9 and 15 minutes to complete, depending on the file size, cellular connection speed, and other factors. Following the download and installation process, Scout GPS Link and Lexus Enform App Suite 2.0 updates may also occur via an over-the-air update system. Follow the procedure below to perform the download and installation process.

2016 MY RC 300 AWD & RC 350 AW.

Additionally, refer to the all applicable Lexus model pre-delivery services for general pre-delivery services to be performed.

This Service Bulletin should be used in conjunction with the applicable model and model year Electronic Wiring Diagram (EWD) and/or Repair Manual.

A GFCI breaker can be tripped for various reasons, one of the reasons may be related to the DCA-8000. We are investigating this issue to determine the root cause. Other reasons the GFCI breaker may trip ?Circuit demand is too high for GFCI rating ?Worn out GFCI internal contacts ?Improper installation or wiring of GFCI breaker

The subject AWD (All Wheel Drive) vehicles received a set of carpet floor mats designed for a RWD (Rear Wheel Drive) model. If installed, the driver's floor mat is too wide and cannot be secured in the correct position using the retaining clips.

A GFCI breaker can be tripped for various reasons, one of the reasons may be related to the DCA-8000. We are investigating this issue to determine the root cause. Other reasons the GFCI breaker may trip ? Circuit demand is too high for GFCI rating ? Worn out GFCI internal contacts ? Improper installation or wiring of GFCI breaker

Below is an explanation of what information is required when testing a 12V battery on the new Warranty Battery Testers.

applicable 2018 ? 2019 model year Lexus vehicles after the process is initiated by Techstream. The steps outlined in this bulletin include: ? Techstream Messages ? DCM Activation Confirmation ? Vehicle Confirmation

To simplify the diagnosis of the microphone, Safety Connect SOS button lights, and DCM (telematics transceiver) inoperative conditions, refer to the procedure below to prevent unnecessary parts replacement.

L-SB-0108-17. ? Applicability has been updated to include 2019 model year UX200 and UX250h vehicles. Service Bulletin No. L-SB-0108-17 is obsolete and any printed versions should be discarded. A battery in a stored vehicle is subject to conditions that can reduce its performance and life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should check battery SOC and recharge, if necessary, within 48 hours of delivery to customers.

In addition, some models may also utilize retaining clips for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retaining clips.

These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle's battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should check battery SOC and recharge, if necessary, within 48 hours of delivery to customers.

These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer's responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle's battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should check battery SOC and recharge, if necessary, within 48 hours of delivery to customers.

(versions less than 1225 or 1245 with 20 Teammate) may exhibit one or more of the following conditions: ?Navigation reset while entering a destination. ?Voice command does not recognize Starbucks. ??Unable to establish audio connection? message, and Alexa is unable to resume after Android AutoTM interruption. ?Soft buttons grayed Out during panoramic view monitor transition. ?HVAC fan speed displayed incorrectly. ?Volume cannot be adjusted with the rear seat remote control. ?Multimedia system reboots when iPhone is connected via USB. ?Energy flow information is missing on energy monitor screen. ?Clearance sonar indication on backup camera screen is missing. ?Audio from USB devices intermittently works. ?iPhone ringer continues after answering call. ?Audio titles not displayed. ?Toyota apps screen menu not displayed. Some 2020 ? 2021 model year vehicles equipped with 17CY+ Panasonic Navigation (version less than 1150) and Audio (version less than 1163) may exhibit one or more of the following conditions: ?Poor map screen touch operation. ?Navigation system reset. ?Climate temperature control difficult to operate. ??Waiting for the Beep? message displayed, voice recognition does not start when pressing the push to talk button. ?Blower motor speed incorrectly displayed. ?White CarPlay screen when connecting iPhone12. ?Navigation sub-screen blank while playing a CD. ?Inoperative rear seat entertainment track controls. ?Abnormal energy flow screen appearance. ?Incorrect FM or SiriusXM genre Information. A software update is now available to address these conditions. Follow the Software Update Procedure in this bulletin to address these conditions.

in some 2016 ? 2022 model year Lexus vehicles equipped with an FKS engine

in some 2016 ? 2022 model year Lexus vehicles equipped with an FKS engine

in some 2016 ? 2021 model year Lexus vehicles equipped with an FKS engine.

air flow between the vents ?Little or no air flow from the vent(s) ?Improper MODE control function Some vehicles may also exhibit one or more of the following Diagnostic Trouble Codes (DTCs): ?B1441 ? Air Mix Damper Control Servo Motor Circuit (Front Passenger Side Lower Air Mix) ?B1442 ? Air Inlet Damper Control Servo Motor Circuit ?B1443 ? Air Outlet Damper Control Servo Motor Circuit ?B1445 ? Passenger Side Cool Air Bypass Damper Control ?B1446 ? Air Mix Damper Control Servo Motor Circuit (Driver Side Lower Air Mix) ?B1447 ? Rear Air Mix Damper Control Servo Motor Circuit ?B1448 ? Passenger Side Face Servo Motor Circuit ?B1449 ? Rear Air Outlet Damper Control Servo Motor Circuit ?B1453 ? Driver Side Air Outlet Damper COOL Control Servo Motor Circuit ?B1454 ? Passenger Side Air Outlet Damper COOL Control Servo Motor Circuit ?B1455 ? Driver Side Air Outlet Damper FOOT/DEF Control Servo Motor Circuit ?B1457 ? Driver Side Air Outlet Damper Control Servo Motor Circuit ?B1458 ? Passenger Side Air Outlet Damper Control Servo Motor Circuit ?B1486 ? Driver Side Air Outlet Damper Control Servo Motor Circuit ?B1488 ? Rear Air Mix Damper Control Servo Motor Circuit (Front Passenger) Follow the Repair Procedure in this bulletin to address these conditions.

Follow the Repair Procedure in this bulletin to address this condition.

feeling (back and forth jerking that comes right after a shift but then dissipates quickly after 1 ? 2 and/or 2 ? 3 upshifts) ? A surge feeling (back and forth rocking that is not associated with transmission shifts) when the vehicle is traveling between 0 ? 46 mph, transmission is in 3rd ? 8th gear, and torque converter is in full lock-up The Engine Control Module/ECM (SAE Term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of these conditions. Follow the Repair Procedure in this bulletin to address these conditions.

L-SB-0021-14. G1765 Applicability has been updated to include applicable 2018 models and 2016 ? 2018 model year RC 300 and 2015 ? 2018 model year RC 350 vehicles. ? Applicability has been updated to exclude 2001 ? 2003 model year ES 300 vehicles. Service Bulletin No. L-SB-0021-14 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines the use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Lexus term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ECU is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Lexus-specific control unit

Control Solenoid ?A? Actuator Stuck Off) and/or harsh engagement when shifting into Drive. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been updated to prevent this condition. Follow the Repair Procedure in this bulletin to address this condition. REVISION NOTICE April 15, 2019 Rev1: ? The Production Change Information section has been updated. Any previous printed versions of this bulletin should be discarded.

injectors manually on 2GR-FKS engines. When direct injection is started and then stopped using the active test, current ECU logic does not turn off the direct injectors and can cause DTCs P017200, P017500 and P0160300. To avoid this condition, technicians should raise engine RPM when changing back and forth between the Direct Injection and Port Injection active tests. Use the recommended procedure below to avoid this concern while testing injection mode of FKS equipped vehicles. NOTE: If the active test is used multiple times without using this procedure to raise engine RPM, it may be necessary to reset learning values for fuel trim and Air to Fuel ratio before returning vehicle to customer.

Please see L-SB-0057-22

Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments.

Please see L-SB-0043-20.

Please see L-SB-0003-20.

Please see L-SB-0045-18.

repair manual target to the proper size.

Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments.

Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments.

established, vehicle settings and/or network/cellular coverage concerns.

The settlement includes Lexus?s agreement to provide a Customer Support Program for certain 2013-2020 model year (MY) vehicles originally equipped with low pressure fuel pumps repaired under Safety Recall 20LA01 or Special Service Campaign 21LC01. The purpose of this Customer Support Program letter is to help clarify how to administer this coverage in accordance with the settlement.

following Diagnostic Trouble Codes (DTCs): ?DTC P0171 and/or P0174 (System Too Lean Bank 1/Bank 2) ?DTC P0087 Fuel Rail / System Pressure ? Too Low Techstream data list analysis may reveal positive fuel trims including a no pressure condition verified by a manual fuel pressure gauge. Follow the Repair Procedure in this bulletin to address these conditions.

These reports have indicated there is a possibility that the inside door handles can break where the latch release cable is attached if the handle is repeatedly used with high force. If this occurs, the inside door handle can become inoperative. Although the rear inside door handles are covered by Lexus? New Vehicle Limited Warranty for 4 years or 50,000 miles (whichever comes first), we at Lexus care about the customers? ownership experience. Lexus is providing coverage for repairs related to the rear inside door handle becoming inoperative. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.

evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part. NOTE The ARINIX Tip is NOT registered or labeled for sale or use outside the United States or Puerto Rico.

The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect vehicle systems and components. Any problems that are found should be corrected immediately.

The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect vehicle systems and components. Any problems that are found should be corrected immediately.

To improve customer satisfaction and repair A/C system leaks in one dealer visit, Toyota has developed a set of guidelines for evaluating A/C system components.

Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.

Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.

To improve customer satisfaction and repair A/C system leaks in one dealer visit, Toyota has developed a set of guidelines for evaluating A/C system components.

temperature difference between the driver and/or passenger seats. Follow the Repair Procedure in this bulletin to address this condition.

This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Lexus.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.

RC300 and RC350 Vehicles Incorrect Driver's Carpet Floor Mat.

If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle.

If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle.

If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle.

?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.

ST004-01, SU001-08, and L-SB-0174-08. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding. This Service Bulletin provides best practice procedures for vehicle pulling complaint, diagnosis, and repair for 2002 ? 2021 model year Lexus vehicles. This information supplements Repair Manual procedures when the symptoms are: ?Vehicle Pulling: The vehicle moves to the right or left when the driver holds the steering wheel while driving straight ahead without exerting steering effort. ?Steering Wheel Off Center: The vehicle travels straight, but the steering wheel is not pointed straight ahead. The vehicle is not pulling. Before repairing a vehicle pulling to one side, it is necessary to clearly identify the cause of the pulling condition. Frequently, pulling to one side is diagnosed as a wheel alignment concern. However, the actual cause may be related to the lateral force generated by the tires, vehicle damage, road crown or worn components. Performing a wheel alignment when tire force is the cause could result in the wheel alignment being set at a value outside of specifications. This could then cause other problems such as uneven tire wear, etc. A customer may notice a pull to the left when in the left lanes of travel and notice a pull to the right or no pull when traveling in the right lanes of travel on the very same section of roadway. This road crown effect is environmental and cannot be corrected with suspension adjustments or any other wheel or tire modification discussed in this bulletin.

?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.

? Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.

? Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.

handle is repeatedly used with high force. If this occurs, the inside door handle can become inoperative.

L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, PG002-90, L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003 93, and PG002-90. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1990 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin.

The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition.

For customers who find this characteristic objectionable, an updated shim kit is now available as a service part.

This is only applicable on 2WD F Sport vehicles. This condition may be present at city, highway, and/or parking lot speeds. For customers who find this characteristic objectionable, an updated front brake pad kit is available.

This is only applicable on 2WD F Sport vehicles. This condition may be present at city, highway, and/or parking lot speeds. For customers who find this characteristic objectionable, an updated front brake pad kit is available.

Wheel offset, defined as the distance between the wheel?s centerline and the wheel-to-rotor mounting surface, affects the clearance between the back of the wheel and surrounding brake components (Figure 1). Installation of a wheel with an offset or width different than the correct specification, such as installing the rear wheel on the front, can cause damage to brake components due to interference between the wheel and adjacent parts. The wheel could contact the brake caliper thereby introducing stress into the caliper, brake rotor, and potentially other components. In some cases, this stress could contribute to cracking or separation of the brake rotor.

noise from the front wheel area during slow (parking lot) speed turns. The clicking noise that can be heard during sharp turns is a normal condition for certain vehicles originally equipped with a lightweight two-piece aluminum rotor assembly. For customers who find this objectionable, an alternative steel rotor is available. Before performing the repair in this bulletin, it is recommended to review the visual differences of the steel rotor with the customer.

noise from the front wheel area during slow (parking lot) speed turns. The clicking noise that can be heard during sharp turns is a normal condition for certain vehicles originally equipped with a lightweight two-piece aluminum rotor assembly. For customers who find this objectionable, an alternative steel rotor is available. Before performing the repair in this bulletin, it is recommended to review the visual differences of the steel rotor with the customer.

Any previous printed versions of this bulletin should be discarded. Some 2013 ? 2019 model year Lexus vehicles equipped with 2WD drivetrain and the F Sport package may exhibit a clicking noise from the front wheel area during a slow (parking lot) speed turn. Follow the Repair Procedure in this bulletin to address this condition.

model year Lexus vehicles.

Service Lane - Knowledge Center.

This condition may be more noticeable in colder ambient temperatures and may occur when traveling over uneven roads or when the vehicle comes to a complete stop. Follow the Repair Procedure in this bulletin to address this condition. APPLICABLE WARRANTY ? This repair is covered under the Lexus Basic Warranty. This warranty is in effect for 48 months or 50,000 miles, whichever occurs first, from the vehicle?s in-service date. ? Warranty application is limited to occurrence of the specified condition described in this bulletin.