2006 Lexus Is 350 TSBs

Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.

Coverage for Cracked and/or Sticky/Melting Dashboards ( Inst krukment Panels) as a Result of Heat or Humidity.

Coverage for Cracked and/or Sticky/Melting Dashboards ( Inst krukment Panels) as a Result of Heat or Humidity.

L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, PG002-90, L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003 93, and PG002-90. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1990 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin.

L-SB-0041-15. ? Applicability has been updated to exclude 2007 model year LS600h vehicles. ? The Repair Procedure section has been updated. Service Bulletin No. L-SB-0041-15 is obsolete and any printed versions should be discarded. Some 2006 ? 2015 model year Lexus vehicles may exhibit a condition where any of the following components become sticky and/or cracked. ? Dashboard/instrument panel ? Interior door trim panels (front and rear) ? IP Lower (No. 1) ? Center console box ? Center console RR ? Glove compartment Follow the Repair Procedure in this bulletin to address this condition.

dashboards as a result of heat or humidity. NOTE: The same voluntary Warranty Enhancement Program coverage described herein is also applicable to certain 2006-2008 MY IS 250/350 and certain 2007 MY LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity.

? Dashboard/instrument panel ? Interior door trim panels (front and rear) ? IP Lower (No. 1) ? Center console box ? Center console RR ? Glove box. Follow the Repair Procedure in this bulletin to address this condition.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS 250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS 250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles.

NOTE: The same Warranty Enhancement Program coverage described herein is also applicable to certain 2006-2008 MY IS 250/350 and certain 2007 MY LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity. Late Production 2008 IS 250/350 vehicles are only eligible for cracked and/or sticky/melting Front and Rear Interior Door Panels as a result of heat or humidity. In Mid-December, 2014 Lexus announced the reimbursement phase of this warranty enhancement program. Since that announcement, Lexus has been diligently making parts preparations for the parts replacement phase of this Program. Due to the age, volume, and breadth of the covered vehicles subject to the Program and the size and complexity of dashboard manufacturing, Lexus will be launching the part replacement portion of this Program in several phases; please refer to the table below for part replacement model phasing.

NOTE: The same Warranty Enhancement Program coverage described herein is also applicable to certain 2006-2008 MY IS 250/350 and certain 2007 MY LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity. Late Production 2008 IS 250/350 vehicles are only eligible for cracked and/or sticky/melting Front and Rear Interior Door Panels as a result of heat or humidity. In Mid-December, 2014 Lexus announced the reimbursement phase of this warranty enhancement program. Since that announcement, Lexus has been diligently making parts preparations for the parts replacement phase of this Program. Due to the age, volume, and breadth of the covered vehicles subject to the Program and the size and complexity of dashboard manufacturing, Lexus will be launching the part replacement portion of this Program in several phases; please refer to the table below for part replacement model phasing.

NOTE: The same Warranty Enhancement Program coverage described herein is also applicable to certain 2006-2008 MY IS 250/350 and certain 2007 MY LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity. In Mid-December, 2014 Lexus announced the reimbursement Phase of this warranty enhancement program. Since prior to that announcement, Lexus has been diligently making parts preparations for the parts replacement phase of this Program. Due to the age, volume, and breadth of the covered vehicles subject to the Program and the size and complexity of dashboard manufacturing, Lexus will be launching the part replacement portion of this Program in several phases; please refer to the table below for part replacement model phasing.

NOTE: The same Warranty Enhancement Program coverage described herein is also applicable to certain 2006-2008 MY IS 250/350 and certain 2007 MY LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity.In Mid-December, 2014 Lexus announced the reimbursement Phase of this warranty enhancement program. Since prior to that announcement, Lexus has been diligently making parts preparations for the parts replacement phase of this Program. Due to the age, volume, and breadth of the covered vehicles subject to the Program and the size and complexity of dashboard manufacturing, Lexus will be launching the part replacement portion of this Program in several phases; please refer to the table below for part replacement model phasing. Although Lexus is increasing production levels, it is difficult to predict customer demand and where parts need to be shipped to support customer demand. It is important that dealerships explain to customers that there still may be a period of time the customer will need to wait before part replacement can be performed. Please be sure to take this into consideration when performing customer scheduling.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS 250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles. NOTE: The same Warranty Enhancement Program coverage described herein is also applicable to 2006 - 2008 Model Year IS 250/350 and 2007 Model Year LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS 250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles. NOTE: The same Warranty Enhancement Program coverage described herein is also applicable to 2006 - 2008 Model Year IS 250/350 and 2007 Model Year LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity.

This program extends the warranty coverage for repairs related to cracked and/or sticky/melted dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles.

This program extends the warranty coverage for repairs related to cracked and/or sticky/melted dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles.

can break if not pulled in the direction specified on the handle. The part has been changed in production and parts have been prepared to support a product update for existing customer vehicles.

can break if not pulled in the direction specified on the handle. The part has been changed in production and parts have been prepared to support a product update for existing customer vehicles.

L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, and PG002-90. Service Bulletin Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, and PG002-90 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Vehicle replacement certification labels (vinyl label installed on driver door or door post) and VIN lates (metal plate riveted to dashboard) may be available from Lexus, provided the request meets one of the criteria listed in this Service Bulletin.

Extension of Warranty Coverage for Cracked and/or Sticky/Melting Dashboards (Instrument Panels) as a Result of Heat or Humidity.

This program extends the warranty coverage for repairs related to cracked and/or sticky/melted dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles.

This program extends the warranty coverage for repairs related to cracked and/or sticky/melted dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS 250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS 250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles.

NOTE: The same Warranty Enhancement Program coverage described herein is also applicable to certain 2006-2008 MY IS 250/350 and certain 2007 MY LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity.In Mid-December, 2014 Lexus announced the reimbursement Phase of this warranty enhancement program. Since prior to that announcement, Lexus has been diligently making parts preparations for the parts replacement phase of this Program. Due to the age, volume, and breadth of the covered vehicles subject to the Program and the size and complexity of dashboard manufacturing, Lexus will be launching the part replacement portion of this Program in several phases; please refer to the table below for part replacement model phasing. Although Lexus is increasing production levels, it is difficult to predict customer demand and where parts need to be shipped to support customer demand. It is important that dealerships explain to customers that there still may be a period of time the customer will need to wait before part replacement can be performed. Please be sure to take this into consideration when performing customer scheduling.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS 250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles. NOTE: The same Warranty Enhancement Program coverage described herein is also applicable to 2006 - 2008 Model Year IS 250/350 and 2007 Model Year LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity.

This Program extends the warranty coverage for repairs related to cracked and/or sticky/melting Dashboards (Instrument Panels) as a result of heat or humidity on 2007-2008 model year ES 350, 2003-2008 model year GX 470, 2006-2008 model year IS 250/350, 2007 model year LS 460, 2004-2006 model year RX 330, 2007-2009 model year RX 350, and 2005-2008 model year RX 400h vehicles. NOTE: The same Warranty Enhancement Program coverage described herein is also applicable to 2006 - 2008 Model Year IS 250/350 and 2007 Model Year LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity.

two windshield stoppers bonded to the top of the windshield or the windshield retainers bonded to the lower edge of the windshield. This bulletin provides the recommended repair procedure to eliminate these types of noises from the windshield area.

Operation Communication Bulletins may reference specifically required adhesives and sealants

? February 11, 2015 Rev1: Applicability has been updated to include 2006 ? 2015 model year Lexus vehicles. On some vehicles, when Rapgard? is removed, the paint may have a stained appearance. These stains appear to be under the clear coat. The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture. Use the following procedure to address this condition.

(Instrument Panels) as a Result of Heat or Humidity.

exhibit cracked and/or sticky/melting dashboards as a result of heat or humidity. NOTE: The same voluntary Warranty Enhancement Program coverage described herein is also applicable to certain 2006-2008 MY IS 250/350 and certain 2007 MY LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity.

as a Result of Heat or Humidity.

Any previous printed versions of this bulletin should be discarded. Some 2006 - 2009 model year IS 250/350, 2008 - 2009 model year IS-F, 2007 - 2009 LS 460/460L, and 2008 - 2009 LS 600h models may exhibit a discolored and/or "striped" condition inside the inner rear view mirror glass as shown in Figure 1. An improved service part has been developed to correct this condition.

NOTE: The same Warranty Enhancement Program coverage described herein is also applicable to certain 2006-2008 MY IS 250/350 and certain 2007 MY LS 460 vehicles for cracked and/or sticky/melting front and rear interior door panels as a result of heat or humidity. In Mid-December, 2014 Lexus announced the reimbursement phase of this warranty enhancement program. Since that announcement, Lexus has been diligently making parts preparations for the parts replacement phase of this Program. Due to the age, volume, and breadth of the covered vehicles subject to the Program and the size and complexity of dashboard manufacturing, Lexus will be launching the part replacement portion of this Program in several phases; please refer to the table below for part replacement model phasing.

These stains appear to be under the clear coat. The stain patterns are usually under wrinkles in the Rapgard. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture. Use the following procedure to address this concern.

These stains appear to be under the clear coat. The stain patterns are usually under wrinkles in the Rapgard. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture. Use the following procedure to address this concern.

NOTE: THE SAME WARRANTY ENHANCEMENT PROGRAM COVERAGE DESCRIBED HEREIN IS ALSO APPLICABLE TO CERTAIN 2006-2008 MY IS 250/350 AND CERTAIN 2007 MY LS 460 VEHICLES FOR CRACKED AND/OR STICKY/MELTING FRONT AND REAR INTERIOR DOOR PANELS AS A RESULT OF HEAT OR HUMIDITY. LATE PRODUCTION 2008 IS 250/350 VEHICLES ARE ONLY ELIGIBLE FOR CRACKED AND/OR STICKY/MELTING FRONT AND REAR INTERIOR DOOR PANELS AS A RESULT OF HEAT OR HUMIDITY. IN MID-DECEMBER, 2014 LEXUS ANNOUNCED THE REIMBURSEMENT PHASE OF THIS WARRANTY ENHANCEMENT PROGRAM. SINCE THAT ANNOUNCEMENT, LEXUS HAS BEEN DILIGENTLY MAKING PARTS PREPARATIONS FOR THE PARTS REPLACEMENT PHASE OF THIS PROGRAM. DUE TO THE AGE, VOLUME, AND BREADTH OF THE COVERED VEHICLES SUBJECT TO THE PROGRAM AND THE SIZE AND COMPLEXITY OF DASHBOARD MANUFACTURING, LEXUS WILL BE LAUNCHING THE PART REPLACEMENT PORTION OF THIS PROGRAM IN SEVERAL PHASES; PLEASE REFER TO THE TABLE BELOW FOR PART REPLACEMENT MODEL PHASING."

NOTE: THE SAME WARRANTY ENHANCEMENT PROGRAM COVERAGE DESCRIBED HEREIN IS ALSO APPLICABLE TO CERTAIN 2006-2008 MY IS 250/350 AND CERTAIN 2007 MY LS 460 VEHICLES FOR CRACKED AND/OR STICKY/MELTING FRONT AND REAR INTERIOR DOOR PANELS AS A RESULT OF HEAT OR HUMIDITY. LATE PRODUCTION 2008 IS 250/350 VEHICLES ARE ONLY ELIGIBLE FOR CRACKED AND/OR STICKY/MELTING FRONT AND REAR INTERIOR DOOR PANELS AS A RESULT OF HEAT OR HUMIDITY. IN MID-DECEMBER, 2014 LEXUS ANNOUNCED THE REIMBURSEMENT PHASE OF THIS WARRANTY ENHANCEMENT PROGRAM. SINCE THAT ANNOUNCEMENT, LEXUS HAS BEEN DILIGENTLY MAKING PARTS PREPARATIONS FOR THE PARTS REPLACEMENT PHASE OF THIS PROGRAM. DUE TO THE AGE, VOLUME, AND BREADTH OF THE COVERED VEHICLES SUBJECT TO THE PROGRAM AND THE SIZE AND COMPLEXITY OF DASHBOARD MANUFACTURING, LEXUS WILL BE LAUNCHING THE PART REPLACEMENT PORTION OF THIS PROGRAM IN SEVERAL PHASES; PLEASE REFER TO THE TABLE BELOW FOR PART REPLACEMENT MODEL PHASING."

NOTE: THE SAME WARRANTY ENHANCEMENT PROGRAM COVERAGE DESCRIBED HEREIN IS ALSO APPLICABLE TO CERTAIN 2006-2008 MY IS 250/350 AND CERTAIN 2007 MY LS 460 VEHICLES FOR CRACKED AND/OR STICKY/MELTING FRONT AND REAR INTERIOR DOOR PANELS AS A RESULT OF HEAT OR HUMIDITY. IN MID-DECEMBER, 2014 LEXUS ANNOUNCED THE REIMBURSEMENT PHASE OF THIS WARRANTY ENHANCEMENT PROGRAM. SINCE PRIOR TO THAT ANNOUNCEMENT, LEXUS HAS BEEN DILIGENTLY MAKING PARTS PREPARATIONS FOR THE PARTS REPLACEMENT PHASE OF THIS PROGRAM. DUE TO THE AGE, VOLUME, AND BREADTH OF THE COVERED VEHICLES SUBJECT TO THE PROGRAM AND THE SIZE AND COMPLEXITY OF DASHBOARD MANUFACTURING, LEXUS WILL BE LAUNCHING THE PART REPLACEMENT PORTION OF THIS PROGRAM IN SEVERAL PHASES; PLEASE REFER TO THE TABLE BELOW FOR PART REPLACEMENT MODEL PHASING."

NOTE: THE SAME WARRANTY ENHANCEMENT PROGRAM COVERAGE DESCRIBED HEREIN IS ALSO APPLICABLE TO CERTAIN 2006-2008 MY IS 250/350 AND CERTAIN 2007 MY LS 460 VEHICLES FOR CRACKED AND/OR STICKY/MELTING FRONT AND REAR INTERIOR DOOR PANELS AS A RESULT OF HEAT OR HUMIDITY. IN MID-DECEMBER, 2014 LEXUS ANNOUNCED THE REIMBURSEMENT PHASE OF THIS WARRANTY ENHANCEMENT PROGRAM. SINCE THAT ANNOUNCEMENT, LEXUS HAS BEEN DILIGENTLY MAKING PARTS PREPARATIONS FOR THE PARTS REPLACEMENT PHASE OF THIS PROGRAM. DUE TO THE AGE, VOLUME, AND BREADTH OF THE COVERED VEHICLES SUBJECT TO THE PROGRAM AND THE SIZE AND COMPLEXITY OF DASHBOARD MANUFACTURING, LEXUS WILL BE LAUNCHING THE PART REPLACEMENT PORTION OF THIS PROGRAM IN SEVERAL PHASES; PLEASE REFER TO THE TABLE BELOW FOR PART REPLACEMENT MODEL PHASING. "

ANY PREVIOUS PRINTED VERSIONS OF THIS BULLETIN SHOULD BE DISCARDED. SOME 2006 2009 MODEL YEAR IS 250/350, 2008 2009 MODEL YEAR IS-F, 2007 2009 LS 460/460L, AND 2008 - 2009 LS 600H MODELS MAY EXHIBIT A DISCOLORED AND/OR STRIPED CONDITION INSIDE THE INNER REAR VIEW MIRROR GLASS AS SHOWN IN FIGURE 1. AN IMPROVED SERVICE PART HAS BEEN DEVELOPED TO CORRECT THIS CONDITION. "

TO IMPROVE SERVICEABILITY OF THE FLOOR CARPET GROMMET (FLOOR CLAMP RETAINER), A NEW SERVICE PART HAS BEEN DEVELOPED WHICH ALLOWS THE FLOOR CARPET GROMMET TO BE REPLACED SEPARATELY FROM THE CARPET ASSEMBLY. MODELS INCLUDE ES350; IS F; IS250; IS350; IS250C, IS350. *PE

or humidity.

Please see L-SB-0023-20.

Please see L-SB-0008-20. Replacement Certification Labels and VIN Plates

Please see L-SB-0003-20.

Please see L-SB-0017-19.

Refer to the Dealer Letter and Q&A for additional information.

Please use the information provided in this communication to respond to any customer inquiries.

support materials that will help remind dealership customers and associates of the importance of proper floor mat usage.

Once the system is reset, all previously registered keys will be erased.

Once the system is reset, all previously registered keys will be erased.

Please see L-SB-0082-14.

Please see L-SB-0092-13.

OBSOLETE NOTICE November 28, 2017: This bulletin is now obsolete. Please see L-SB-0179-17.

Please see L-SB-0001-18.

Please see L-SB-0082-14.

Once the system is reset, all previously registered keys will be erased.

ALL LEXUS 2002 - 2006 MODELS. *TT ALL '02 - '07 MODELS. LEXUS. *TT

The settlement includes Lexus?s agreement to provide a Customer Support Program (?CSP?) for 2002-2019 model year (MY) vehicles originally equipped with certain Takata airbag inflators or repaired under a recall with Takata airbag inflators to provide coverage for repairs of the airbag inflator contained in the airbag module. This CSP letter is to help clarify how to administer this coverage in accordance with the settlement. This is NOT a recall or a campaign, but is provided to reassure owners that Lexus stands behind the reliability of our vehicles

If a level surface with a consistent plane is not available, use the Floor Slope Compensation Procedure in this service bulletin in conjunction with the appropriate model and model year Repair Manual instructions when adjusting the millimeter wave radar sensor.

If a level surface is not available, this tech tip should be used in conjunction with the repair manual to set the angle of the front millimeter wave radar sensor and reflector height before performing beam axis adjustment.

L-SB-0167-08. ? Applicability has been updated to include 2008 model year IS F vehicles. Service Bulletin No. L-SB-0167-08 is obsolete and any printed versions should be discarded. Some 2006 ? 2008 model year IS250 and IS350 and 2008 model year IS F vehicles may exhibit an SRS light ON condition with Diagnostic Trouble Code (DTC) B1861 (Open in Driver Side Knee Airbag Squib Circuit). Follow the Repair Procedure in this bulletin to address this condition.

from the rear suspension when driving. New Rear Lowering Coil Springs are available to address this condition. Follow the Repair Procedure in this bulletin to replace the Rear Lowering Coil Springs.

from the rear suspension when driving. New Rear Lowering Coil Springs are available to address this condition. Follow the Repair Procedure in this bulletin to replace the Rear Lowering Coil Springs.

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprograming process and outlines use of the TIS and the CUW.

damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.

Electrical and electronic components, including wiring harnesses, are particularly susceptible to corrosion and subsequent malfunction. Although any flooding can be damaging, salt water flooding elevates the potential for abnormal conditions and may increase risks due to its highly corrosive and conductive nature. Salt residue also continues to corrode and remain conductive even after a vehicle dries. This bulletin is intended to assist with safe handling and inspection of flood damaged vehicles and to provide basic guidance on likely needed repairs.

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.

The Repair Procedure section, Required Tools & Equipment section, and the Repair Procedure section has been updated. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.

damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.

damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.

Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU's information.

FROM THE REAR SUSPENSION WHEN DRIVING. NEW REAR LOWERING COIL SPRINGS ARE AVAILABLE TO ADDRESS THIS CONDITION. FOLLOW THE REPAIR PROCEDURE IN THIS BULLETIN TO REPLACE THE REAR LOWERING COIL SPRINGS.

MODELS 2001-13 CT200H, ES300, 300H, 330, 350, GS300, 350, 450, 450H, 460, GX460, 470, HS250H, IS F, IS250, 250C, 350, 350C, LFA, LS430, 460, 600H, LX470, 570, RX330, 350, 400H, 450H, SC430. *PE

FLASH REPROGRAMMING ALLOWS THE ECU SOFTWARE TO BE UPDATED WITHOUT REPLACING THE ECU. FLASH CALIBRATION UPDATES FOR SPECIFIC VEHICLE MODELS/ECUS ARE RELEASED AS FIELD FIX PROCEDURES DESCRIBED IN INDIVIDUAL SERVICE BULLETINS. *PE

F SPORT REAR COIL SPRING CLICK NOISE. SOME MODEL VEHICLES EQUIPPED WITH F SPORT REAR COIL SPRINGS MAY EXHIBIT A CLICKING NOISE FROM THE REAR SUSPENSION WHEN DRIVING. *PE

trim panels (front and rear) become cracked and/or have shiny/degraded appearance. The panel surfaces may also become sticky or adherent. Follow the procedure in this bulletin to address this condition.

integral part of our commitment to meet customer expectations of Toyota products. Toyota will be sending Safety Recall Follow-Up Notices to remind owners whose vehicles have not yet had campaign repairs completed. We request your assistance in completing the applicable campaign repairs as owners receive the Follow-Up Notice and contact your dealership. Please note the follow-up activity may cause an increase in your current campaign owner appointments. Toyota will continue with additional follow-up activities in the months to come. Please take this into consideration when analyzing your manpower requirements.

integral part of our commitment to meet customer expectations of Toyota products. Toyota will be sending Safety Recall Follow-Up Notices to remind owners whose vehicles have not yet had campaign repairs completed. We request your assistance in completing the applicable campaign repairs as owners receive the Follow-Up Notice and contact your dealership. Please note the follow-up activity may cause an increase in your current campaign owner appointments. Toyota will continue with additional follow-up activities in the months to come. Please take this into consideration when analyzing your manpower requirements.

trim panels (front and rear) become cracked and/or have shiny/degraded appearance. The panel surfaces may also become sticky or adherent. Follow the procedure in this bulletin to address this condition.

In the event that injector seal repair is required on vehicles equipped with a direct injection fuel system, a Special Service Tool Set is required to properly install the seal onto the injector. As new vehicle configurations have been released, several injector seal tool sets have been distributed to accommodate these new vehicles. There are a total of three injector seal tool sets for Lexus models, located in the appropriate SST cabinets. Each kit contains multiple pieces as shown in the diagram below. The individual pieces must remain together to ensure these tools are used correctly. Refer to the repair manual for the tool information to ensure the correct tool is used for the desired application.

door trim panels (front and rear) become cracked and/or have shiny/degraded appearance. The panel surfaces may also become sticky or adherent. Follow the procedure in this bulletin to address this condition.

our commitment to meet customer expectations of Lexus products. Lexus will be sending Safety Recall Follow-Up Notices to remind owners whose vehicles have not yet had recall campaign repairs completed. We request your dealer's assistance in completing the applicable recall campaign repairs as owners receive the Safety Recall Follow-Up Notices and contact them. Please note the follow-up activity may cause an increase in current recall campaign owner appointments. Lexus will continue with additional follow-up activities in the months to come.

our commitment to meet customer expectations of Lexus products. Lexus will be sending Safety Recall Follow-Up Notices to remind owners whose vehicles have not yet had recall campaign repairs completed. We request your dealer's assistance in completing the applicable recall campaign repairs as owners receive the Safety Recall Follow-Up Notices and contact them. Please note the follow-up activity may cause an increase in current recall campaign owner appointments. Lexus will continue with additional follow-up activates in the months to come.

our commitment to meet customer expectations of Lexus products. Lexus will be sending Safety Recall Follow-Up Notices to remind owners whose vehicles have not yet had recall campaign repairs completed. We request your dealer's assistance in completing the applicable recall campaign repairs as owners receive the Safety Recall Follow-Up Notices and contact them. Please note the follow-up activity may cause an increase in current recall campaign owner appointments. Lexus will continue with additional follow-up activities in the months to come.

our commitment to meet customer expectations of Lexus products. Lexus will be sending Safety Recall Follow-Up Notices to remind owners whose vehicles have not yet had recall campaign repairs completed. We request your dealer's assistance in completing the applicable recall campaign repairs as owners receive the Safety Recall Follow-Up Notices and contact them. Please note the follow-up activity may cause an increase in current recall campaign owner appointments. Lexus will continue with additional follow-up activates in the months to come.

INTEGRAL PART OF OUR COMMITMENT TO MEET CUSTOMER EXPECTATIONS OF TOYOTA PRODUCTS. TOYOTA WILL BE SENDING SAFETY RECALL FOLLOW-UP NOTICES TO REMIND OWNERS WHOSE VEHICLES HAVE NOT YET HAD CAMPAIGN REPAIRS COMPLETED. WE REQUEST YOUR ASSISTANCE IN COMPLETING THE APPLICABLE CAMPAIGN REPAIRS AS OWNERS RECEIVE THE FOLLOW-UP NOTICE AND CONTACT YOUR DEALERSHIP. PLEASE NOTE THE FOLLOW-UP ACTIVITY MAY CAUSE AN INCREASE IN YOUR CURRENT CAMPAIGN OWNER APPOINTMENTS. TOYOTA WILL CONTINUE WITH ADDITIONAL FOLLOW-UP ACTIVITIES IN THE MONTHS TO COME. PLEASE TAKE THIS INTO CONSIDERATION WHEN ANALYZING YOUR MANPOWER REQUIREMENTS."

INTEGRAL PART OF OUR COMMITMENT TO MEET CUSTOMER EXPECTATIONS OF TOYOTA PRODUCTS. TOYOTA WILL BE SENDING SAFETY RECALL FOLLOW-UP NOTICES TO REMIND OWNERS WHOSE VEHICLES HAVE NOT YET HAD CAMPAIGN REPAIRS COMPLETED. WE REQUEST YOUR ASSISTANCE IN COMPLETING THE APPLICABLE CAMPAIGN REPAIRS AS OWNERS RECEIVE THE FOLLOW-UP NOTICE AND CONTACT YOUR DEALERSHIP. PLEASE NOTE THE FOLLOW-UP ACTIVITY MAY CAUSE AN INCREASE IN YOUR CURRENT CAMPAIGN OWNER APPOINTMENTS. TOYOTA WILL CONTINUE WITH ADDITIONAL FOLLOW-UP ACTIVITIES IN THE MONTHS TO COME. PLEASE TAKE THIS INTO CONSIDERATION WHEN ANALYZING YOUR MANPOWER REQUIREMENTS."

DOOR TRIM PANELS (FRONT AND REAR) BECOME CRACKED AND/OR HAVE SHINY/DEGRADED APPEARANCE. THE PANEL SURFACES MAY ALSO BECOME STICKY OR ADHERENT. FOLLOW THE PROCEDURE IN THIS BULLETIN TO ADDRESS THIS CONDITION.

Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).

referenced campaigns to remind owners whose vehicles have not yet had campaign repairs completed.

have not yet had the following Safety Recall/Special Service Campaign repairs completed. Please note the following information for Area associates.

Owner notifications will be sent over a period of several weeks consistent with parts availability. To ensure customer satisfaction, Lexus requests that dealers complete Safety Recalls/Special Service Campaigns on any used vehicles currently in dealer inventory prior to customer delivery. However, if the campaign cannot be completed (for example, due to remedy parts availability), delivery of a covered vehicle is acceptable if disclosed to the customer that the vehicle is involved in a Safety Recall/Special Service Campaign. Lexus expects dealers to use the attached Customer Contact and Vehicle Disclosure Form to obtain vehicle buyer information. Dealers are expected to provide a copy of the completed form, along with the most current FAQ for that campaign, to the vehicle buyer. Lexus and the dealer may use this information to contact the customer when the remedy becomes available.

In Mid-December, 2014 Lexus announced the reimbursement phase of this warranty enhancement program. Since this announcement, Lexus has been diligently making parts preparations for the parts replacement phase of this program. Due to the age, volume, and breadth of the covered vehicles involved in the Program, and the size and complexity of dashboard manufacturing, Lexus will be launching the part replacement portion of this Program in several phases; please refer to the table below for part replacement model phasing.

sticky/melting dashboards as a result of heat or humidity.

performance.

STICKY/MELTING DASHBOARDS AS A RESULT OF HEAT OR HUMIDITY.

IN MID-DECEMBER, 2014 LEXUS ANNOUNCED THE REIMBURSEMENT PHASE OF THIS WARRANTY ENHANCEMENT PROGRAM. SINCE THIS ANNOUNCEMENT, LEXUS HAS BEEN DILIGENTLY MAKING PARTS PREPARATIONS FOR THE PARTS REPLACEMENT PHASE OF THIS PROGRAM. DUE TO THE AGE, VOLUME, AND BREADTH OF THE COVERED VEHICLES INVOLVED IN THE PROGRAM, AND THE SIZE AND COMPLEXITY OF DASHBOARD MANUFACTURING, LEXUS WILL BE LAUNCHING THE PART REPLACEMENT PORTION OF THIS PROGRAM IN SEVERAL PHASES; PLEASE REFER TO THE TABLE BELOW FOR PART REPLACEMENT MODEL PHASING.

?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.

ST004-01, SU001-08, and L-SB-0174-08. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding. This Service Bulletin provides best practice procedures for vehicle pulling complaint, diagnosis, and repair for 2002 ? 2021 model year Lexus vehicles. This information supplements Repair Manual procedures when the symptoms are: ?Vehicle Pulling: The vehicle moves to the right or left when the driver holds the steering wheel while driving straight ahead without exerting steering effort. ?Steering Wheel Off Center: The vehicle travels straight, but the steering wheel is not pointed straight ahead. The vehicle is not pulling. Before repairing a vehicle pulling to one side, it is necessary to clearly identify the cause of the pulling condition. Frequently, pulling to one side is diagnosed as a wheel alignment concern. However, the actual cause may be related to the lateral force generated by the tires, vehicle damage, road crown or worn components. Performing a wheel alignment when tire force is the cause could result in the wheel alignment being set at a value outside of specifications. This could then cause other problems such as uneven tire wear, etc. A customer may notice a pull to the left when in the left lanes of travel and notice a pull to the right or no pull when traveling in the right lanes of travel on the very same section of roadway. This road crown effect is environmental and cannot be corrected with suspension adjustments or any other wheel or tire modification discussed in this bulletin.

?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.

? Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.

? Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.

turned very little from side-to-side.

connectivity concerns such as: Difficulty to pair the phone. Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.

Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. Various Bluetooth Audio functions are no longer functioning with the customer's phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer's phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or they have restored their phone data/settings recently.

Bluetooth failure to connect to the vehicle when first turning on the vehicle, Various Bluetooth Audio functions are no longer functioning with the customer's phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer's phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or they have restored their phone data/settings recently.

Bluetooth failure to connect to the vehicle when first turning on the vehicle, Various Bluetooth Audio functions are no longer functioning with the customer's phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer's phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or they have restored their phone data/settings recently.

INTERMITTENT BLUETOOTH FAILURE TO CONNECT TO THE VEHICLE WHEN FIRST TURNING ON THE VEHICLE. VARIOUS BLUETOOTH AUDIO FUNCTIONS ARE NO LONGER FUNCTIONING WITH THE CUSTOMER'S PHONE SUCH AS ABILITY TO CHANGE THE TRACK USING THE STEERING WHEEL CONTROLS. THESE CONCERNS CAN BE CAUSED BY CHANGES MADE ON THE CUSTOMER'S PHONE. MAKE SURE TO INQUIRE WITH THE CUSTOMER IF THE CONNECTIVITY CONCERNS OCCURRED AFTER RECEIVING AN OPERATING SYSTEM UPDATE ON THEIR PHONE OR THEY HAVE RESTORED THEIR PHONE DATA/SETTINGS RECENTLY.

THERE IS A REPAIR PROCEDURE. *RM

Wheel offset, deffined as the distance between the wheel's - to - rotor mounting surface, affects the clearance between the back of the wheel and surrounding brake components .

Wheel offset, defined as the distance between the wheel?s centerline and the wheel-to-rotor mounting surface, affects the clearance between the back of the wheel and surrounding brake components (Figure 1). Installation of a wheel with an offset or width different than the correct specification, such as installing the rear wheel on the front, can cause damage to brake components due to interference between the wheel and adjacent parts. The wheel could contact the brake caliper thereby introducing stress into the caliper, brake rotor, and potentially other components. In some cases, this stress could contribute to cracking or separation of the brake rotor.

Wheel offset, defined as the distance between the wheel's centerline and the wheel-to-rotor mounting surface, affects the clearance between the back of the wheel and surrounding brake components. Installation of a wheel with an offset or width different than the correct specification, such as installing the rear wheel on the front, can cause damage to brake components due to interference between the wheel and adjacent parts. The wheel could contact the brake caliper thereby introducing stress into the caliper, brake rotor, and potentially other components. In some cases, the stress could contribute to cracking or seperation of the brake rotor.

equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the Brake Pedal Force Gauge. Refer to the appropriate Repair Manual for parking brake pedal travel inspection and adjustment specification.

Wheel offset, defined as the distance between the wheel's centerline and the wheel-to-rotor mounting surface, affects the clearance between the back of the wheel and surrounding brake components. Installation of a wheel with an offset or width different than the correct specification, such as installing the rear wheel on the front, can cause damage to brake components due to interference between the wheel and adjacent parts. The wheel could contact the brake caliper thereby introducing stress into the caliper, brake rotor, and potentially other components. In some cases, the stress could contribute to cracking or seperation of the brake rotor.

CALIPERS ON SOME LEXUS VEHICLES WHERE SLIDE PIN IN REAR BRAKE CALIPERS NOT OPERATING SMOOTHLY AND MAKE NOISE. *PE

THE SLIDE PIN IN THE REAR BRAKE CALIPERS MAY NOT OPERATE SMOOTHLY ON THESE VEHICLES. IF VEHICLE CONTINUES TO BE OPERATED UNDER THESE CONDITIONS, THE BRAKE PADS MAY MAKE NOISE. CSC LETTER WAS RECEIVED. *PE

*KB

If the manual shift lever is rotated prior to installing the park neutral position switch, the detent spring may become detached from the manual shift lever. Use the information in this bulletin when installing an automatic transmission and/or park neutral position switch assembly.

converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing washers can cause damage to the torque converter assembly. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.

assembly to avoid MIL "ON" shifting issues and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.

remanufactured automatic transmissions.

mileage between scheduled maintenance checks. Here are some important tips when working with ATF-WS in Lexus vehicles requiring its use.

automatic transmissions.

*RM

of the subject vehicles even though the airbags are functioning. Due to a design issue in a connector, some degradation in its connection can cause the SRS warning light to illuminate constantly or intermittently in the instrument cluster. This condition does not prevent the vehicle?s airbags or SRS system from deploying.

vehicles even though the airbags are functioning. Due to a design issue in a connector, some degradation in its connection can cause the SRS warning light to illuminate constantly or intermittently in the instrument cluster. This condition does not prevent the vehicle?s airbags or SRS system from deploying. Note: If this condition is present, DTC B1861 will be present or stored in history. Although the driver side knee airbag inflator connector is covered by Lexus?s Restraint System Warranty for 6 years or 70,000 miles (whichever comes first), we at Lexus care about the customers? ownership experience. Lexus is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.

vehicles even though the airbags are functioning. Due to a design issue in a connector, some degradation in its connection can cause the SRS warning light to illuminate constantly or intermittently in the instrument cluster. This condition does not prevent the vehicle?s airbags or SRS system from deploying.

reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pretensioner devices did not per

Lexus does NOT recommend replacement of original seat covers with non-Lexus leather or other seat cover materials on vehicles due to the following: Seat covers NOT recommended by Lexus may affect side airbag performance, in general or in part, during an accident. Modifications that negatively affect side airbag performance can result in severe occupant injuries. Seat covers are an integral part of this safety system. Replacing fabric seat covers with non-Lexus leather or other seat cover materials may compromise the effectiveness of this safety system. The design of the seat is complex, integrating safety and strength with comfort and luxury. Lexus strongly discourages modifying original equipment seats that have optional side airbags. Additionally, Lexus strongly advises against the installation or use of aftermarket seat covers, which could impair the performance of the side airbags in the event of an accident.

seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pre-tensioner devices did not perform as expected (including an unintended deployment event), please follow the steps in the recommendations section below.

NEGATIVELY AFFECT SIDE AIR BAG PERFORMANCE CAN RESULT IN SEVERE INJURIES. *PE

*PE

DUE TO IMPROPER ASSEMBLY OF THE AIRBAG INFLATOR, WHICH IS INCORPORATED INTO THE SRS AIRBAG ASSEMBLY (SIDE AIRBAG, CURTAIN SIDE AIRBAG OR DRIVER KNEE AIRBAG), SOME INFLATORS WERE PRODUCED WITH AN INSUFFICIENT AMOUNT OF THE HEATING AGENTS NECESSARY FOR PROPER AIRBAG DEPLOYMENT. *TT

Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.

Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.

Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.

Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.

Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.

Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.

be involved.

This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.

This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.

Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. These concerns can be caused by changes made on the customer's phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or they have restore their phone data/settings recently.

Conditions typically experienced include inability to pair the iPhone to the system, poor sound quality during phone calls placed through the audio/navigation system, and the inability to place a hands free phone call using the audio/navigation system.

This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Lexus.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.

The quick reference chart is applicable to current generation vehicles only.

WARRANTY" AS IT APPLIES TO THE DASHBOARD. THE SPECIFIC CONDITION COVERED BY THIS PROGRAM IS ANY CRACKED AND/OR STICKY/MELTED DASHBOARD AS A RESULT OF HEAT OR HUMIDITY FOR ANY COVERED VEHICLE. IF THE CONDITION IS VERIFIED, THE REPAIR WILL BE PERFORMED IN ACCORDANCE WITH THE APPLICABLE TSB UNDER THE TERMS OF THIS WARRANTY ENHANCEMENT PROGRAM.

*TT

L-SB-0021-14. G1765 Applicability has been updated to include applicable 2018 models and 2016 ? 2018 model year RC 300 and 2015 ? 2018 model year RC 350 vehicles. ? Applicability has been updated to exclude 2001 ? 2003 model year ES 300 vehicles. Service Bulletin No. L-SB-0021-14 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines the use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Lexus term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ECU is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Lexus-specific control unit

L-SB-0021-14. * Applicability has been updated to include applicable 2018 models and 2016 * 2018 model year RC 300 and 2015 * 2018 model year RC 350 vehicles. * Applicability has been updated to exclude 2001 - 2003 model year ES 300 vehicles. Service Bulletin No. L-SB-0021-14 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines the use of TIS and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Lexus term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ECU is used as a generic label for the following SAE J1930 standard references: * Powertrain Control Module (PCM) * Engine Control Module (ECM) * Transmission Control Module (TCM) * Any other Lexus-specific control unit

Lexus and <dealer name> are working together to conduct a random quality confirmation activity involving your <MY Model> <VIN> that previously had the ALE Valve Spring Replacement campaign performed.

'06 LEXUS. *TT EXCLUDING HYBRID VEHICLES. *TT RECOMMENDATION. *TT

*TT