2012 Land Rover Range Rover Sport TSBs

AS A NATURAL PRODUCT AND THE CONDITIONS IT MAY CAUSE."

CAUSE: THIS MAY BE CAUSED BY THE MOLDING'S RETAINING CLIPS LOSING TENSION."

CAUSE: THIS MAY BE CAUSED BY THE MOLDING'S RETAINING CLIPS LOSING TENSION."

REAR* COOLER BOX ARE NOT OPERATING CAUSE CUSTOMER PERCEPTION"

USING THE IPOD/IPHONE USB CABLE ONLY, THE PLAYBACK SOUND MAY BE DISTORTED OR JUMPS/SKIPS. CAUSE: UNKNOWN, CURRENTLY UNDER INVESTIGATION."

REAR SPOILER WOULD COME ADRIFT. MODEL 2012-2013 RANGE ROVER SPORT. *PE

incorrectly changed for knock issues when the front bush is cracked and should have been replaced as per Technical Service Bulletins LTB00204v4 and LTB00123v4.

Any of the following DTCs (indicating an air intake system leak) could be stored in the Powertrain Control Module (PCM) ? P2187, P2189, P0505, P0507.

Diagnostic Trouble Code (DTC) B1B87-31, stored in Driver Seat Module (DSM) or Passenger Seat Module (PSM) Note that the seat height motor is supplied as part of the cushion sub-assembly or motor sub-assembly (depending on model)

Diagnostic Trouble Code (DTC) B1B87-31, stored in Driver Seat Module (DSM) or Passenger Seat Module (PSM) Note that the seat height motor is supplied as part of the cushion sub-assembly or motor sub-assembly (depending on model)

DISPLAYED IN THE INSTRUMENT CLUSTER; ENGINE FAILS TO CRANK; VEHICLE MAY NOT UNLOCK / LOCK WHEN USING PASSIVE ENTRY OR WHEN PRESSING A SMART KEY BUTTON.

CAUSE: THIS MAY BE CAUSED BY DUST AND/OR WATER INGRESS TO THE ACCESSORY DRIVE BELT IDLER PULLEY BEARING."

CAUSE: THIS MAY BE CAUSED BY DUST AND/OR WATER INGRESS TO THE PRIMARY DRIVE BELT IDLER PULLEY BEARING."

CAUSE: THIS MAY BE CAUSED BY INTERNAL MECHANISM COMPONENTS BECOMING WORN."

INSTRUMENT CLUSTER: FAULTY GENERATOR FAULTY BATTERY MONITORING SYSTEM (BMS) THE CHARGE WARNING INDICATOR IS ILLUMINATED WHEN THE ENGINE IS RUNNING. CAUSE: THE POWER SUPPLY IS A FULLY INTEGRATED SYSTEM THAT REQUIRES SDD TO DIAGNOSE OVERALL FUNCTIONALITY ROBUSTLY TO MAKE SURE CUSTOMER SATISFACTION IS MET VIA RIGHT FIRST TIME DIAGNOSIS."

DISCOVERY 4/LR4 (L319) AND RANGE ROVER SPORT (L320) ONLY. 10 MODEL YEAR ONWARDS. CAUSE: JLR ENGINEERING ARE CURRENTLY INVESTIGATING TO UNDERSTAND ANY SITUATIONS WHERE THE STEERING COLUMN IS THE CAUSE OF NOISE WHEN TURNING."

A COOLANT LEAK IS FOUND FROM THE SEAM ON COOLANT PIPE (LR018275). SEE THE ATTACHED FILE FOR AN EXAMPLE OF THE LEAK LOCATION. CAUSE: A PROCESS ISSUE AT COMPONENT SUPPLIER."

TO BE INSTALLED ON VEHICLES BUILT WITH THE PRIOR PART. CAUSE: THE VCT SOLENOID DESIGN CHANGED, AND THE ELECTRICAL CONNECTOR ON THE VCT SOLENOID IS A DIFFERENT SIZE."

DISPLAYED IN THE INSTRUMENT CLUSTER; ENGINE FAILS TO CRANK; VEHICLE MAY NOT UNLOCK / LOCK WHEN USING PASSIVE ENTRY OR WHEN PRESSING A SMART KEY BUTTON. CAUSE: THIS MAY BE CAUSED BY A 'LOCK UP' OF THE KEYLESS VEHICLE MODULE (KVM)."

THE NOISE MAY BE MORE PRONOUNCED WHEN THE ENGINE IS AT IDLE SPEED. CAUSE: THIS MAY BE CAUSED BY WEAR ON THE TIMING CHAIN LEVER, RESULTING IN REDUCED TENSION ON THE TIMING CHAIN."

OF TIME OR A LOW COOLANT LEVEL MESSAGE IS DISPLAYED IN THE MESSAGE CENTER. UPON INSPECTION, A LEAK MAY BE FOUND TO BE FROM THE FRONT OF THE ENGINE-DRIVEN COOLANT PUMP, TOGETHER WITH EXCESSIVE WEAR OF THE COOLANT PUMP BEARING."

ACTION: PLEASE REFER TO THE PROCEDURE BELOW FOR INFORMATION ON HOW TO ACCESS THE NEW INFORMATION THROUGH SDD."

DISCOVERY 4/LR4 (L319) AND RANGE ROVER SPORT (L320) ONLY. 10 MODEL YEAR ONWARDS. CAUSE: JLR ENGINEERING ARE CURRENTLY INVESTIGATING TO UNDERSTAND ANY SITUATIONS WHERE THE STEERING COLUMN IS THE CAUSE OF NOISE WHEN TURNING.

A COOLANT LEAK IS FOUND FROM THE SEAM ON COOLANT PIPE (LR018275). SEE THE ATTACHED FILE FOR AN EXAMPLE OF THE LEAK LOCATION. CAUSE: A PROCESS ISSUE AT COMPONENT SUPPLIER."

CAUSE: THE TIMING CHAIN WAS NOT AT THE CORRECT TENSION. THIS WAS CAUSED BY THE FULL REPAIR PROCEDURE IN TSB LTB00474 NOT BEING FOLLOWED - A COMPLETE SET OF TIMING CHAIN TENSIONERS AND BLADES WERE NOT FITTED."

THE ENGINE CRANKS NORMALLY BUT WILL NOT START. CAUSE: THE ENGINE MAY HAVE BEEN FITTED WITH THE WRONG CAMSHAFT TIMING RINGS."

CAUSE: LEAK FROM THE WAGNER/STEERING GEAR DAMPING VALVE OR SEALING WASHER (SEE ATTACHED PHOTO'S)"

BEEN INCORRECTLY CHANGED FOR KNOCK ISSUES WHEN THE FRONT BUSH IS CRACKED AND SHOULD HAVE BEEN REPLACED AS PER TECHNICAL SERVICE BULLETINS LTB00204V4 AND LTB00123V4. CAUSE: INCORRECT DIAGNOSIS OF FRONT AND REAR BUSH ISSUES. SEE ATTACHED PHOTO SHOWING AN EXAMPLE OF A CRACKED FRONT BUSH."

ACTION: PLEASE REFER TO THE PROCEDURE BELOW FOR INFORMATION ON HOW TO ACCESS THE NEW INFORMATION THROUGH SDD."

UPON INSPECTION, LOW PRESSURE IS RECORDED ON THE HIGH PRESSURE SYSTEM, HIGH PRESSURE IS RECORDED ON THE LOW PRESSURE SYSTEM, AND THE COMPRESSOR CLUTCH (WHERE APPLICABLE) IS WORKING PROPERLY. CAUSE: THIS MAY BE CAUSED BY THE A/C COMPRESSOR DIRECT PRESSURE SENSING (DPS) VALVE BEING WORN."

DISCOVERY 4/LR4 (L319) AND RANGE ROVER SPORT (L320) ONLY. 10 MODEL YEAR ONWARDS. CAUSE: JLR ENGINEERING ARE CURRENTLY INVESTIGATING TO UNDERSTAND ANY SITUATIONS WHERE THE STEERING COLUMN IS THE CAUSE OF NOISE WHEN TURNING."

A COOLANT LEAK IS FOUND FROM THE SEAM ON COOLANT PIPE (LR018275). SEE THE ATTACHED FILE FOR AN EXAMPLE OF THE LEAK LOCATION. CAUSE: A PROCESS ISSUE AT COMPONENT SUPPLIER."

INDUCTION / FUEL INJECTION CLEANING EQUIPMENT OR MATERIALS. THIS INCLUDES, BUT IS NOT LIMITED TO, ""VACU-FLUSH"" TYPE EQUIPMENT. CAUSE: THE USE OF NON-APPROVED EQUIPMENT CAN CAUSE THE ENGINES TO HYDRO-LOCK, OR CAUSE OTHER ENGINE DAMAGE, AND SOMETIMES THE ONLY POSSIBLE REPAIR IS TO REPLACE THE ENGINE."

CAUSE: THIS MAY BE CAUSED BY TORSIONAL ISOLATOR AND/OR THE TORSIONAL ISOLATOR SPRING SUPPORT SHAFT WEAR CAUSING EXCESSIVE BACKLASH IN THE SUPERCHARGER DRIVE."

HIGHER TIME IN SERVICE VEHICLES, WHERE INSUFFICIENT PERFORMANCE OF THE AIR CONDITIONING COMPRESSOR HAS BEEN FOUND TO BE THE ROOT CAUSE OF THE ISSUE. COMPRESSOR PART NO. LR010723 & LR013934"

CAUSE: JLR ENGINEERING HAVE FOUND DURING THEIR INVESTIGATIONS THAT THE INSTRUMENT PANEL UPPER SECTION SPEAKER APERTURE BOLT MAY HAVE A RELAXED TORQUE (SEE TOPIX WORKSHOP MANUAL SECTION 76.46.04 FIG. E12471)"

CAUSE: THE TIMING CHAIN WAS NOT AT THE CORRECT TENSION. THIS WAS CAUSED BY THE FULL REPAIR PROCEDURE IN TSB LTB00474 NOT BEING FOLLOWED - A COMPLETE SET OF TIMING CHAIN TENSIONERS AND BLADES WERE NOT FITTED."

OF TIME OR A LOW COOLANT LEVEL MESSAGE IS DISPLAYED IN THE MESSAGE CENTER. UPON INSPECTION, A LEAK MAY BE FOUND TO BE FROM THE FRONT OF THE ENGINE-DRIVEN COOLANT PUMP, TOGETHER WITH EXCESSIVE WEAR OF THE COOLANT PUMP BEARING."

C1119-09,C1119-22,C1119-62, C1119-91,C1B11-62, MAY BE PRESENT. CAUSE: REPLACEMENT OF THE VALVE BLOCK MAY NOT BE REQUIRED AS LOWER LEVEL COMPONENTS ARE AVAILABLE. SEE ATTACHED DOCUMENT FOR COMPONENT LOCATION AND PART NUMBERS."

2F, P2405-00, P2406-00, P240A-00, P240B-00, P240C- 00, P2450-00 OR P2451-00 CAUSE: IF NO FAULT IS FOUND ON THE VEHICLE HAVING FOLLOWED THE LATEST DIAGNOSTIC GUIDANCE IN TOPIX, THE CAUSE MAY BE AN INTERNAL DMTL PUMP FAILURE."

ROVER / RANGE ROVER VEHICLES IN WARRANTY. CAUSE: UNKNOWN ENGINEERING INVESTIGATION ON-GOING."

ISSUE: LAND ROVER ARE CURRENTLY EVALUATING REPORTS WHERE DIAGNOSIS HAS LED TO A CONCERN WITH THE AIR SUSPENSION VALVE BLOCK ON DISCOVERY 4/ RANGE ROVER SPORT 10MY ONWARDS. CAUSE: CURRENTLY UNDER INVESTIGATION."

START THE ENGINE USING THE STOP/START BUTTON. WHEN THIS OCCURS, THE SMART KEY NOT FOUND MESSAGE IS NOT DISPLAYED AND THE ENGINE WILL NOT START WITH THE REMOTE KEY FOB IN THE FAILSAFE STARTING POSITION. CAUSE: THIS MAY BE CAUSED BY COMPONENT TOLERANCES WITHIN THE CENTRAL JUNCTION BOX (CJB) PREVENTING CORRECT FUNCTIONALITY DURING ENGINE START ATTEMPTS."

UPON FURTHER INVESTIGATION, INCLUDING REMOVING THE SUPERCHARGER DRIVE BELT AND RUNNING THE ENGINE TO CONFIRM THE NOISE IS NO LONGER PRESENT, THE NOISE MAY BE FOUND TO BE COMING FROM THE SUPERCHARGER ASSEMBLY. CAUSE: THIS MAY BE CAUSED BY THE FOLLOWING CONDITIONS: THE TORSIONAL ISOLATOR SPRING MAY FAIL DUE TO LACK OF ADEQUATE INPUT SHAFT PILOT SUPPORT, LEADING TO OVERHANG AND INCREASED STRESSES IN THE TORSION SPRING AND CAUSING EXCESSIVE BACKLASH IN THE SUPERCHARGER DRIVE AND NO TORSIONAL DAMPING. BEARING CONTAMINATION."

DIAGNOSIS MAY DETERMINE THAT THERE MAY BE SIGNS OF VISIBLE HEAT DAMAGE TO EITHER THE HEATED FRONT WINDSHIELD FUSES, HEATED FRONT WINDSHIELD RELAY, OR THE EJB / UNDERHOOD FUSE BOX. CAUSE: AT AMBIENT TEMPERATURES APPROXIMATELY BELOW 38F/4C, THE HEATED FRONT WINDSHIELD AND HEATED REAR WINDOW WILL TURN ON AUTOMATICALLY. THIS MEANS THE HEATED FRONT WINDSHIELD AND HEATED REAR WINDOW MAY BE ON FOR LONGER PERIODS OF TIME WITHOUT THE DRIVER KNOWING. THE EXTENDED OPERATION CAN RESULT IN OVERHEATING OF THE FUSES WITHIN THE ENGINE JUNCTION BOX (EJB) / UNDERHOOD FUSE BOX."

HIGHER TIME IN SERVICE VEHICLES, WHERE INSUFFICIENT PERFORMANCE OF THE AIR CONDITIONING COMPRESSOR HAS BEEN FOUND TO BE THE ROOT CAUSE OF THE ISSUE. COMPRESSOR PART NO. LR010723 & LR013934 ACTION: THE COMPRESSOR SUPPLIER IN CONJUNCTION WITH LAND ROVER ENGINEERING HAVE MADE IMPROVEMENTS TO THE COMPRESSORS TO IMPROVE THEIR SERVICE LIFE AND RELIABILITY, AND TWO IMPROVED COMPRESSORS HAVE BEEN SUPPLIED TO PARTS OPERATIONS LR010723 SUPERSEDES TO LR056364 LR013934 SUPERSEDES TO LR056365 PLEASE ENSURE THAT THE LATER PART NUMBER IS FITTED TO ANY VEHICLE THAT IS SUFFERING FROM LACK OF COMPRESSOR PERFORMANCE."

CAUSE: LAND ROVER ENGINEERING HAVE RECENTLY VISITED DEALERSHIPS WHERE A REQUEST HAS BEEN MADE TO REPLACE THE STEERING GEAR FOR AN OIL LEAK IN THE AREA OF THE PINION HOUSING, CASTING, YOKE PLUG OR THE GAITER ADJACENT TO THE PINION HOUSING. FOLLOWING INVESTIGATION THE SOURCE OF THE LEAK PATH WAS IDENTIFIED AS BEING FROM THE SUPPLY AND RETURN HOSE O-RING SEALS. SEE ATTACHED DOCUMENT FOR EXAMPLES."

THE ENGINE MALFUNCTION INDICATOR LAMP (MIL) MAY ALSO BE ILLUMINATED WITH MISFIRE DIAGNOSTIC TROUBLE CODES (DTC) P0301 THROUGH P0308 AND P0316, DEPENDING ON THE AFFECTED CYLINDER(S), STORED IN THE ENGINE CONTROL MODULE (ECM). CAUSE: THIS MAY BE CAUSED BY POOR FUEL QUALITY OR FUEL CONTAMINATION, LEADING TO CLOGGED FUEL INJECTORS AND RESTRICTING THE FUEL INJECTOR FLOW RATE."

CUSTOMER EXPERIENCES THE ENGINE OVERHEATING. CAUSE: THE REFILL PROCEDURE HAS NOT BEEN COMPLETED CORRECTLY, RESULTING IN INSUFFICIENT COOLANT IN THE ENGINE."

CAUSE: WHEN CHARGING A BATTERY (BOTH PRIMARY AND SECONDARY) WITH A BMS (BATTERY MONITORING SYSTEM) FITTED, THE EARTH FROM THE CHARGER MUST BE CONNECTED TO A SUITABLE CHASSIS OR ENGINE EARTH (CHECK TOPIX FOR APPROPRIATE LOCATION). THIS ALLOWS THE BMS TO SEE THE CURRENT GOING INTO THE BATTERY. HOWEVER WHEN USING A DIAGNOSTIC CHARGER FROM MIDTRONICS SUCH AS GR1, GRX GR8(110 VOLTS)THIS CONNECTION PROCESS CAN CAUSE AN INCORRECT BATTERY ANALYSIS DUE TO THE EXTRA RESISTANCE IN THE WIRING WHEN CONNECTED TO A CHASSIS OR ENGINE EARTH."

CAUSE: LAND ROVER ENGINEERING HAVE RECENTLY VISITED DEALERSHIPS WHERE A REQUEST HAS BEEN MADE TO REPLACE THE STEERING GEAR FOR AN OIL LEAK IN THE AREA OF THE PINION HOUSING, CASTING, YOKE PLUG OR THE GAITER ADJACENT TO THE PINION HOUSING. FOLLOWING INVESTIGATION THE SOURCE OF THE LEAK PATH WAS IDENTIFIED AS BEING FROM THE SUPPLY AND RETURN HOSE O-RING SEALS."

CAUSED BY TIMING CHAIN LEVER BEING WORNED AND REDUCING TENSION. MODEL 2010-2012 LR4, RANGE ROVER SPORT, RANGE ROVER. *PE

07/14/2014*LJ

GAITER ADJACENT TO PINION HOUSING, AND STEERING GEAR NEEDS REPLACING. MODEL RANGE ROVER SPORT, LR3, LR4. NO MODEL YEARS. *PE

(HLDF) on occasions may fail to download software correctly resulting in no communications with the module and blank screen.

RETURNED TO THE SUPPLIER (DENSO) TO INVESTIGATE FOR POSSIBLE DEFECTS."

INTERMITTENT: - THE CURRENT VEHICLE POSITION DISPLAYED IS 'WASHINGTON D.C.' AND NOT THE ACTUAL CURRENT POSITION. ONCE A GPS SIGNAL IS ACQUIRED, THE CURRENT VEHICLE POSITION WILL THEN BE CORRECTLY DISPLAYED. - ROUTE GUIDANCE IS NOT AFFECTED DURING THIS INTERMITTENT FAULT MODE; IF THE ISSUE OCCURRED DURING ROUTE GUIDANCE, THE CURRENT ROUTE WILL CONTINUE TO BE DISPLAYED. B. PERMANENT: - THE CURRENT VEHICLE POSITION DISPLAYED IS 'WASHINGTON D.C.' AND NOT THE ACTUAL CURRENT POSITION. THE CURRENT VEHICLE POSITION WILL CONTINUE TO BE INCORRECTLY DISPLAYED AS 'WASHINGTON D.C.' FOLLOWING AN IGNITION CYCLE ('OFF' / 'ON'). - ROUTE GUIDANCE IS AFFECTED DURING THIS PERMANENT FAULT MODE; IF THE ISSUE OCCURRED DURING ROUTE GUIDANCE, THE CURRENT ROUTE WILL NOT RESUME AND THE DESTINATION WILL BE CANCELLED. - ALL PREVIOUS DESTINATIONS WILL BE DELETED (BUTTON 'GRAYED OUT'). CAUSE: THESE MAY BE CAUSED BY A SOFTWARE ISSUE OR HARD FAULT WITH THE INTEGRATED AUDIO MODULE (IAM). ACTION: SHOULD A CUSTOMER EXPRESS THIS CONCERN, FOLLOW APPROPRIATE SERVICE INSTRUCTION [A OR B] OUTLINED BELOW. A. INTERMITTENT: UPDATE THE INTEGRATED AUDIO MODULE (IAM) SOFTWARE. B. PERMANENT: REPLACE THE INTEGRATED AUDIO MODULE (IAM)."

CAUSE THE FRONT CONTROL DISPLAY INTERFACE MODULE(TOUCHSCREEN) HAS NO EFFECT ON BLUETOOTH CONNECTIVITY IN THE CAR AND AS SUCH MAY BE INCORRECTLY DIAGNOSED AND REPLACED AS THE SOURCE OF THE ISSUE."

UPON DIAGNOSIS, THE TECHNICIAN MAY FIND DIAGNOSTIC TROUBLE CODES (DTC) B1D64-87 AND/OR B1D65-87 STORED IN THE HEADLAMP LEVELING CONTROL MODULE. CAUSE: THIS MAY BE CAUSED BY A SOFTWARE ERROR WITHIN THE HEADLAMP LEVELING CONTROL MODULE."

IF THE NAV BUTTON IS PRESSED A 2-5 SECOND PERIOD OF AM/ FM RADIO CAN BE HEARD AND THEN RETURNS BACK TO NO AUDIO. ISSUE WILL ONLY SELF-RECOVER AFTER AN IGNITION CYCLE. CAUSE: CURRENTLY UNDER ANALYSIS."

CAMERA), THE CAMERA IMAGE MAY BE LOST AND A BLUE SCREEN IS DISPLAYED. CAUSE: THIS MAY BE CAUSED BY SIGNAL LOSS FROM POOR CONNECTIONS, HARNESS ROUTING AND EXCESSIVE BENDING, THE HARNESS BEING TIGHTLY CLAMPED, AND DAMAGE TO THE INSULATION."

FOR FAULT CODES LOGGED IN THE KVM (KEYLESS VEHICLE MODULE) ALSO KNOWN AS THE RFA (REMOTE FUNCTION ACTUATOR) F000-63/U3000-63, CONTROL MODULE - CIRCUIT/ COMPONENT PROTECTION TIME-OUT IS LOGGED. CAUSE THIS DTC IS SET WHEN THE KVM HAS GONE THROUGH A SELF RESET"

IF A BCM HAS BEEN DETERMINED TO REQUIRE REPLACEMENT FOLLOWING DIAGNOSIS, PLEASE CARRY OUT THE STEPS LISTED IN THE ACTION BELOW. CAUSE: CURRENTLY UNDER ANALYSIS."

LINE DISPLAY FRONT (HLDF), MAY BE WRONGLY REPLACED WHEN TROUBLESHOOTING IF ISSUES ARE INCORRECTLY ATTRIBUTED TO IT. CAUSE: THE TS MAY BE INCORRECTLY DIAGNOSED AS THE SOURCE OF THE FAULT AND REPLACED IN ERROR."

23% WERE FOUND TO HAVE NO DEFECTS. CAUSE: ONE POSSIBLE REASON FOR THIS IS THAT ALL HO2S SENSORS ARE REPLACED WHEN ONLY ONE IS UNSERVICEABLE"

CAUSE THE FRONT CONTROL DISPLAY INTERFACE MODULE (TOUCHSCREEN) HAS NO EFFECT ON BLUETOOTH CONNECTIVITY IN THE CAR AND AS SUCH MAY BE INCORRECTLY DIAGNOSED AND REPLACED AS THE SOURCE OF THE ISSUE"

DIAGNOSTIC TROUBLE CODES (DTC) C110C-14, C110D-14, C110E-14, AND/OR C110F-14 MAY BE PRESENT. CAUSE: THIS MAY BE CAUSED BY THE WIRING TO THE ADAPTIVE DAMPER BEING DAMAGED FROM FATIGUE ATTRIBUTED TO THE ROTATION OF THE DAMPER DURING NORMAL VEHICLE MANEUVERING."

CAUSE: THESE ISSUES MAY BE CAUSED BY FRETTING CORROSION ACROSS THE FUEL SENDER HARNESS PINS INSIDE THE FUEL TANK."

OFF OF POWER TO THE HEADLAMPS, INSTRUMENT CLUSTER, AND TOUCH SCREEN ALL AT THE SAME TIME ACCOMPANIED BY A ""CLICKING"" NOISE SPECIFICALLY FROM THE INTERIOR FUSE BOX LOCATION BY THE GLOVE BOX. ALL SYSTEMS OPERATE NORMALLY THEREAFTER WITHOUT ANY OTHER CUSTOMER SYMPTOMS OR FAULT CODES."

CAUSE: THIS MAY BE CAUSED BY A CORRODED WIRING HARNESS AT THE FRONT AND/OR REAR BUMPER HARNESSES."

CAUSE ALTERNATORS ARE BEING DAMAGED DUE TO CROSS POLARITY WHEN THE VEHICLE IS JUMP STARTED."

DISPLAY FRONT (HLDF) ON OCCASIONS MAY FAIL TO DOWNLOAD SOFTWARE CORRECTLY RESULTING IN NO COMMUNICATIONS WITH THE MODULE AND BLANK SCREEN. CAUSE: THIS MAY BE AS A RESULT OF LOW BATTERY VOLTAGE OR A BREAK IN CONTINUITY OF DIAGNOSTIC CONNECTION DURING THE DOWNLOAD"

THIS CAN RESULT IN SDD REPORTING THAT THE RFA IS OFF BUS BY DISPLAYING A RED CROSS IN THE NETWORKS INTEGRITY SCREEN AND SDD NOT BEING ABLE TO RECOVER THE MODULE. CAUSE THIS MAY BE AS A RESULT OF LOW BATTERY VOLTAGE OR A BREAK IN CONTINUITY OF DIAGNOSTIC CONNECTION DURING THE DOWNLOAD OR A CORRUPTED SOFTWARE DOWNLOAD FILE."

PDIS AND THEN RETURNING THE VEHICLE TO A STORAGE COMPOUND WITHOUT REFITTING THE TRANSIT RELAY OR RETURNING THE VEHICLE TO TRANSIT MODE. TRANSIT MODE / TRANSIT RELAY ARE DESIGNED TO PROTECT THE CUSTOMERS BATTERY UP TO THE POINT OF DELIVERY. ALL VEHICLES IN STORAGE MUST HAVE THE TRANSIT RELAY IN PLACE OR BE IN TRANSIT MODE."

DISPLAY FRONT (HLDF) ON OCCASIONS MAY FAIL TO DOWNLOAD SOFTWARE CORRECTLY RESULTING IN NO COMMUNICATIONS WITH THE MODULE AND BLANK SCREEN. CAUSE: THIS MAY BE AS A RESULT OF LOW BATTERY VOLTAGE OR A BREAK IN CONTINUITY OF DIAGNOSTIC CONNECTION DURING THE DOWNLOAD."

CAUSE: THIS MAY BE CAUSED BY A CORRODED WIRING HARNESS AT THE FRONT AND/OR REAR BUMPER HARNESSES."

CAUSE: THIS MAY BE CAUSED BY CORRODED CHASSIS WIRING HARNESS AT THE REAR LEFT-SIDE CHASSIS-TO-BODY CONNECTOR.

VEHICLES WHERE THE FUSE FOR THE HEATED FRONT WINDSHIELD BLOWS. AT 2012MY, THE HEATED FRONT WINDSHIELD FUSE WAS CHANGED FROM A 'LITTLE' FUSE TO A 'J-CASE', WITH THE RATING REMAINING AT 30A."

VEHICLES WHERE THE FUSE FOR THE HEATED FRONT WINDSHIELD BLOWS. AT 2012MY, THE HEATED FRONT WINDSHIELD FUSE WAS CHANGED FROM A 'LITTLE' FUSE TO A 'J-CASE', WITH THE RATING REMAINING AT 30A. ACTION: RETAILERS ARE REQUIRED TO HOLD ALL AFFECTED VEHICLES WITHIN THE LISTED VIN RANGE THAT ARE IN THEIR CONTROL AND REFRAIN FROM RELEASING THE VEHICLES FOR NEW OR USED VEHICLE SALE PENDING COMPLETION OF THE REWORK ACTION DETAILED IN THIS TECHNICAL BULLETIN."

CAUSE: AT AMBIENT TEMPERATURES APPROXIMATELY BELOW 38F/4C, THE HEATED WINDSHIELD AND HEATED REAR WINDOW WILL TURN ON AUTOMATICALLY. WHEN BOTH THEN AUTOMATICALLY TURN OFF, A LARGE LOAD CHANGE TO THE ELECTRICAL POWER SUPPLY SYSTEM MAY OCCUR. THIS LOAD CHANGE MAY LEAD THE CENTRAL JUNCTION BOX (CJB) TO ENTER A LOAD PROTECTION COUNTERMEASURE."

CAUSE: THESE ISSUES MAY BE CAUSED BY FRETTING CORROSION ACROSS THE FUEL SENDER HARNESS PINS INSIDE THE FUEL TANK."

IS LOCATED IN THE CENTER CONSOLE CUPHOLDER. CAUSE: THIS MAY BE CAUSED BY LOW SMART KEY HANDSET BATTERY VOLTAGE OR WHERE A MOBILE PHONE, LAPTOP, OR OTHER RELATED ELECTRONIC DEVICE IS PLACED IN CLOSE PROXIMITY TO THE SMART KEY HANDSET. IT IS IMPORTANT TO ESTABLISH IF ANY OF THESE ARE THE CASE BEFORE CONTINUING WITH EITHER SERVICE INSTRUCTION. IF NONE OF THESE ARE EVIDENT, IT MAY BE CAUSED BY NON-LINEARITY OF THE HANDSET LF AMPLIFIER."

DISPLAY FRONT (HLDF) ON OCCASIONS MAY FAIL TO DOWNLOAD SOFTWARE CORRECTLY RESULTING IN NO COMMUNICATIONS WITH THE MODULE AND BLANK SCREEN. CAUSE: THIS MAY BE AS A RESULT OF LOW BATTERY VOLTAGE OR A BREAK IN CONTINUITY OF DIAGNOSTIC CONNECTION DURING THE DOWNLOAD."

(DTC) B11DB-87 STORED IN THE BODY CONTROL MODULE (BCM). CAUSE: THIS MAY BE CAUSED BY A BLOWN BATTERY MONITORING SYSTEM (BMS) FUSED HARNESS."

AVAILABLE, IS NOT SHOWING AS PAIRED BUT IS AVAILABLE, IS DIFFICULT TO PAIR, AUDIO FRAGMENTS WHEN STREAMING MUSIC AND/OR OTHER UNEXPECTED BEHAVIOR. CAUSE: THIS CAN BE A RESULT OF REDUCED PHONE POWER DUE TO THE FOLLOWING:- BATTERY LIFE SOFTWARE UPDATE ON THE CUSTOMERS DEVICE, OTHER APPLICATIONS RUNNING IN THE BACKGROUND ON THE CUSTOMERS DEVICE (SUCH AS GAMES, SOCIAL MEDIA APPS, SEARCHING FOR NUMEROUS PAIRED DEVICES). A BREAK IN THE LINE OF SIGHT FROM THE IAM TO THE CUSTOMER DEVICE (E.G. DEVICE IN POCKET CAUSING ATTENUATION BY THE HUMAN BODY). ANOMALIES INTRODUCED WITH SOFTWARE UPDATES OF DEVICE THAT MAY REDUCE THE EFFECTIVENESS OF AUTHENTICATION BETWEEN THE CUSTOMER DEVICE AND THE VEHICLE. NOTE: THESE ISSUES ARE WELL DOCUMENTED ON OFFICIAL PHONE MANUFACTURERS SUPPORT WEB SITES."

THE AUDIO/VIDEO BUTTON ON TOUCH-SCREEN HOME PAGE MAY ALSO BE GREYED OUT. CAUSE: ONE OF THE MODULES SITUATED ON THE MOST BUS, SUCH AS AUDIO AMPLIFIER MODULE OR AUDIO CONTROL MODULE, HAVE A SOFTWARE CONFLICT."

TROUBLE CODE (DTC) U0128-00 STORED IN THE INSTRUMENT CLUSTER (IC); FUEL GAUGE INOPERATIVE; FUEL GAUGE NOT SHOWING MORE THAN HALF FULL; FUEL GAUGE FLUCTUATES; AND/OR FUEL GAUGE SWITCHES ON/OFF INTERMITTENTLY. CAUSE: THESE ISSUES MAY BE CAUSED BY: LR4, RANGE ROVER SPORT ONLY: SOFTWARE ISSUE WITHIN THE INSTRUMENT CLUSTER (IC). BACKED-OUT PINS IN ANY OF THE FOLLOWING AREAS: INTERNAL TO THE FUEL TANK (SENDER WIRING), FUEL PUMP MODULE, AND/OR FUEL TANK FLANGE ASSEMBLY. FRETTING CORROSION ACROSS THE FUEL SENDER HARNESS PINS INSIDE THE FUEL TANK (BLACK CONNECTORS)."

THE VEHICLE SEAT MEMORY MODULE LOGS U1A4C 00, BUILD END OF LINE MODE ACTIVE CAUSE THE SEAT MODULE HAS BEEN INCORRECTLY CONFIGURED TO THE VEHICLE."

FAULT CODES STARTING WITH C1A ESPECIALLY C1A36-01 LOGGED. POSSIBILITY THAT ADDITIONAL WARNING LIGHTS MAY BE DISPLAYED AND ADDITIONAL FAULT CODES STORED. CAUSE THE HARNESS HAS BEEN INCORRECTLY ROUTED AND IS PRESSING AGAINST THE WASHER FILLER TUBE CAUSING INSULATION DAMAGE AND A SHORT CIRCUIT/OPEN CIRCUIT"

LIGHTS ARE DISPLAYED IN THE INSTRUMENT CLUSTER. MODEL 2005-2009 LR3 (LA), 2006-2013 RANGE ROVER SPORT (LS), 2010-2013 LR4 (LA). *PE

AFTER FITMENT, REGARDLESS OF DRIVING CYCLE. *PE

BEING OPEN, EXTERNALLY, DUE TO TRANSIT POWER RELAY CUT TO CAR AND DOOR SOFT CLOSING. MODEL RANGE ROVER, RANGE ROVER SPORT. NO YEARS LISTED. *PE

INSTRUMENT CLUSTER IS SWITCHED OFF, FOR APPROXIMATE 1-2 SECONDS AND THEN OPERATES NORMAL AFTERWARDS. MODELS LR4, RANGE ROVER SPORT. NO MODEL YEARS LISTED. *PE

the extended rear roof spoiler and within the listed VIN range may experience a concern with the extended rear spoiler coming adrift during transportation when the vehicle is loaded facing backwards and generally when on the top deck of a transporter.

bulging.

VARIOUS CONDITIONS THAT CONTRIBUTE TO THE OPERATION OF THE WINDOW REGULATOR NOT OPERATING"

CAUSE: PART SUPPLY CONSTRAINTS."

BECOME MIS-SHAPED SEE ATTACHED PHOTOS CAUSE CORROSION AND THUS STRUCTURAL FAILURE OF THE INTERNAL ALUMINIUM CARRIER CAUSES THE PART TO DISTORT AND POTENTIALLY COME ADRIFT"

CAUSE: THIS MAY BE CAUSED BY A TOLERANCE STACK-UP BETWEEN THE DOOR MIRROR AND THE DOOR AND/OR THE RETAINING SCREWS MAY BE LOOSE/UNDER TORQUED."

CAUSE: A NEW PART AND PART NUMBER ARE AVAILABLE."

CAUSE: THIS MAY BE CAUSED BY A TOLERANCE STACK-UP BETWEEN THE DOOR MIRROR AND THE DOOR AND/OR THE RETAINING SCREWS MAY BE LOOSE/UNDER TORQUED."

CAUSE: THIS MAY BE CAUSED BY A BUILD-UP OF DIRT AND GREASE ON THE SURFACE OF THE WINDSHIELD GLASS."

CAUSE: THIS MAY BE CAUSED BY BODY TOLERANCES IN RELATION TO THE UPPER WINDSHIELD FINISHER PROFILE"

CAUSE: THIS MAY BE CAUSED BY THE HANDSET MANUFACTURING PROCESS."

CAUSE: THIS MAY BE CAUSED BY A TOLERANCE STACK-UP BETWEEN THE DOOR MIRROR AND THE DOOR."

CAUSE: THIS MAY BE CAUSED BY THE HANDSET MANUFACTURING PROCESS."

CAUSE: THIS MAY BE CAUSED BY THE HANDSET MANUFACTURING PROCESS."

CAUSE THE ROOT CAUSE WAS FOUND TO BE THAT ANTI RUST OIL RESIDUE REMAINS ON THE SUPPLIER'S TOOLING AT THE START OF A PRODUCTION RUN."

BULGING.

WHEN ON TOP DECK OF TRANSPORTER, AND FACING BACKWARDS, EXTENDED REAR ROOF SPOILER WOULD COME ADRIFT, WHILE BEING TRANSPORTED. MODEL 2012-2013 RANGE ROVER SPORT. *PE UPDATED 10/15/14. *PE

to respond or no functionality at all.

The Audio/Video button on touch-screen home page may also be greyed out.

to respond or no functionality at all.

Range where the tailgate exterior release switch may display intermittent switching performance issues.

exterior release switch may display intermittent switching performance issues.

CAUSE THERE IS A POTENTIAL THAT THE TOP WINDSCREEN SEAL HAS BECOME DISLODGED OVER TIME CAUSING A WINDNOISE"

DIAGNOSTIC TROUBLE CODES (DTC) ARE STORED. CAUSE: THIS MAY BE CAUSED BY VARIOUS ISSUES."

WHICH IS NOT COMPATIBLE WITH LAND ROVER INFOTAINMENT SYSTEMS. CAUSE THIS IS TO MAKE YOU AWARE OF THE TYPES OF MEDIA THAT MAY CAUSE THE UNIT TO FAIL WITH THE CUSTOMER."

ONLY), THE CAMERA IMAGE MAY BE LOST AND A BLUE SCREEN IS DISPLAYED CAUSE: THIS MAY BE CAUSED BY SIGNAL LOSS THROUGH THE COAX."

'HOOD OPEN' MESSAGE IS DISPLAYED ON THE INSTRUMENT CLUSTER; AND/OR A MISLOCK SOUND IS EMITTED WHEN LOCKING THE VEHICLE. CAUSE: THESE ISSUES MAY BE CAUSED BY A FAULTY HOOD OPEN SWITCH."

WHICH IS NOT COMPATIBLE WITH LAND ROVER INFOTAINMENT SYSTEMS. CAUSE THIS IS TO MAKE YOU AWARE OF THE TYPES OF MEDIA THAT MAY CAUSE THE UNIT TO FAIL WITH THE CUSTOMER. THEY ARE COPY CONTROL COMPACT DISCS (CCCD) RECORDABLE COMPACT DISCS (CD-R) REWRITABLE COMPACT DISCS (CD-RW) ECO DISCS, WHICH ARE VERY THIN, ONLY 0.6MM. PLEASE REFER TO ATTACHMENT FOR EXAMPLES OF DISCS THAT ARE KNOWN TO HAVE CAUSED DAMAGE."

'HOOD OPEN' MESSAGE IS DISPLAYED ON THE INSTRUMENT CLUSTER; AND/OR A MISLOCK SOUND IS EMITTED WHEN LOCKING THE VEHICLE. CAUSE: THESE ISSUES MAY BE CAUSED BY A FAULTY HOOD OPEN SWITCH."

ONLY), THE CAMERA IMAGE MAY BE LOST AND A BLUE SCREEN IS DISPLAYED CAUSE: THIS MAY BE CAUSED BY SIGNAL LOSS THROUGH THE COAX."

CAUSE: INCORRECT DIAGNOSIS."

UPON INSPECTION, LOW PRESSURE IS RECORDED ON THE HIGH PRESSURE SYSTEM, HIGH PRESSURE IS RECORDED ON THE LOW PRESSURE SYSTEM, AND THE COMPRESSOR CLUTCH (WHERE APPLICABLE) IS WORKING PROPERLY.

INSTRUMENT PACK WITH ASSOCIATED DTC'S FOR BRAKE LIGHT SWITCH (P0504-27, P0504-62, C1A96-64) OR BRAKES SHOWING SIGNS OF DRAG AND BINDING. CAUSE: INCORRECT BRAKE LIGHT SWITCH SETTING. NOTE: ANALYSIS OF RETURNED BRAKE SWITCHES HAVE SHOWN NO ISSUES WITH THE BRAKE SWITCH ITSELF. DO NOT REPLACE THE SWITCH BEFORE ADJUSTMENT IS CARRIED OUT."

CAUSE: THIS MAY BE CAUSED BY A LACK OF LUBRICATION OF THE STEERING GEAR PINION SEAL."

CAUSE: THIS MAY BE CAUSED BY POOR BRACKET PAINT FINISH AND / OR LOW TORQUE ON THE SADDLE CLAMP NUT, ALLOWING THE PIPED TO RUB THROUGH THE PAINT."

CAUSE: OIL OR GREASE LEAK PAST INPUT SHAFT SEAL THROUGH NORMAL USE OR SEAL FAILURE."

AN ISSUE WITH STEERING OR STEERING GEARS. MODEL LR4 (L319), LR2 (L359), RANGE ROVER SPORT (L320). *PE

MODEL RANGE ROVER, RANGE ROVER SPORT. NO YEARS LISTED. *PE

instrument cluster.

CAUSE: DAMAGE TO THE CALIPER FINISH WHILE CLEANING THE VEHICLE AND, OR THE ROAD WHEELS"

VEHICLES WITH STANDARD BRAKES ONLY. CAUSE: BRAKE COMPRESSIBILITY OF THE PAD, WHILST WITHIN SPECIFICATION, MAY BE SLIGHTLY INCOMPATIBLE WITH THE DRIVING STYLE AND VEHICLE USAGE PATTERNS OF A SMALL NUMBER OF CUSTOMERS. WHILTST THERE IS NO IMPACT ON THE EFFICIENCY OF THE BRAKING SYSTEM, IN SOME CIRCUMSTANCES THIS MAY LEAD TO NOISE BECOMING APPARENT."

VEHICLES FITTED WITH HIGH PERFORMANCE/BREMBO BRAKES, POST 10 MODEL YEAR ONLY. RANGE ROVER SPORT AA215623 TO CA738069. RANGE ROVER AA302697 TO CA373799. VEHICLES AFTER THE END VIN NUMBERS QUOTED ABOVE WILL HAVE THE NEW PINS FITTED AS STANDARD. CAUSE: GALVANIC CORROSION OF THE RETAINING PINS. THE PINS NOW HAVE A NEW PLATING WHICH IS MORE RESISTANT TO CORROSION."

BE EVIDENT DURING LOW-SPEED, LIGHT-TO-MODERATE BRAKING, UNTIL THE VEHICLE COMES TO A STOP. THIS ISSUE AFFECTS SOME STANDARD REPLACEMENT BRAKE PADS ON VEHICLES WITH HIGH PERFORMANCE BRAKES. CAUSE: THIS MAY BE CAUSED BY FRONT BRAKE PAD RESONANCE."

CAUSE: THIS MAY BE CAUSED BY THE CONTACTS IN THE HORN PAD."

Fault codes U210A - 16 and C1A24 - 67 may also be stored.

CAUSE: AIR LEAK FROM A FRONT OR REAR AIR SPRING TO DAMPER LOWER SEAL."

ACTION: IN ORDER TO CORRECTLY DIAGNOSE THE LEAK PATH ON A STABILIZER BAR, CLEAN THE SUSPECTED AREA THOROUGHLY AND CONFIRM IF THE LEAK IS FROM THE PIPE O-RINGS, THE STABILIZER BAR HYDRAULIC SEAL OR SOMEWHERE ELSE. IF FOUND TO BE FROM THE PIPE O-RINGS (SEE ATTACHED DOCUMENT), THESE ARE SERVICEABLE PARTS AND SHOULD BE REPLACED. IF THE LEAK IS FOUND TO BE FROM THE HYDRAULIC SEAL, THIS IS NOT A SERVICEABLE PART AND A NEW STABILIZER BAR WILL BE REQUIRED."

DIAGNOSTIC TROUBLE CODE (DTC) C1A20-64 MAY BE STORED. VEHICLES WITHIN THE ABOVE VIN RANGES HAVE BEEN FITTED WITH EITHER A HITACHI OR AN OLD-DESIGN AMK SUSPENSION COMPRESSOR."

CAUSE: REAR WHEEL BEARING NOISY OR DIFFICULT TO TURN."

CAN BE HEARD FROM THE FRONT AIR SPRING ASSEMBLY. 5.0L S/C VEHICLES ONLY. AFFECTED VIN RANGE AA215623 - DA814822."

MODEL RANGE ROVER, SPORT, EVOQUE. *PE

This applies to both high line and low line rear camera.

CAUSE: CONDENSATION/MIST IS A NATURAL PHENOMENON WHICH CAN OCCUR WHEN THERE IS A TEMPERATURE DIFFERENCE BETWEEN THE INSIDE AND OF THE LAMP UNIT. THIS CONDENSATION IS CONSIDERED TO BE AS A RESULT OF NORMAL ATMOSPHERIC CONDITIONS AND REPLACING THE LIGHT UNIT WILL CORRECT THIS SYMPTOM. WITH THE INTRODUCTION OF CLEAR LENSES CONDENSATION IS LIKELY TO BE MORE NOTICEABLE BUT DOES NOT AFFECT THE OF THE LAMP. CONDENSATION WILL CLEAR WHEN THE LIGHTS HAVE BEEN ON FOR SOME LENGTH OF TIME AND IN WARMER AMBIENT TEMPERATURES"

CAUSE: DAMAGE/MARKING CAUSED BY OBJECT IMPACT AGAINST THE LENS. STAINING/DISCOLORATION CONTAMINATION CAUSED BY USING ANY TYPE OF CLEANING PRODUCT ON LENS. IMPORTANT: OWNERS HANDBOOK SPECIFIES TO CLEAN WITH A LIGHTLY MOISTENED CLOTH AND DO NOT USE CHEMICAL AGENTS OR DOMESTIC CLEANERS ACTION WHERE A CUSTOMER CONCERN IS REPORTED, PLEASE ORDER THE LENS KIT FOR THE RELEVANT MODEL"

CAUSE: CONDENSATION/MIST IS A NATURAL PHENOMENON WHICH CAN OCCUR WHEN THERE IS A TEMPERATURE DIFFERENCE BETWEEN THE INSIDE AND OUTSIDE OF THE LAMP UNIT. THIS CONDENSATION IS CONSIDERED TO BE AS A RESULT OF NORMAL ATMOSPHERIC CONDITIONS AND REPLACING THE LIGHT UNIT WILL NOT CORRECT THIS SYMPTOM. WITH THE INTRODUCTION OF CLEAR LENSES CONDENSATION IS LIKELY TO BE MORE NOTICEABLE BUT DOES NOT AFFECT THE PERFORMANCE OF THE LAMP. CONDENSATION WILL CLEAR WHEN THE LIGHTS HAVE BEEN ON FOR SOME LENGTH OF TIME AND IN WARMER AMBIENT TEMPERATURES."

CAUSE: THIS MAY BE CAUSED BY THE DESIGN OF THE TAIL LAMP ASSEMBLY ALLOWING MOISTURE TO SETTLE ON THE INSIDE OF THE LAMP LENS."

TROUBLE CODES (DTC) C1119-62, C1119-09, AND/OR C1B11-62 MAY BE STORED, POSSIBLY INDICATING SYSTEM CONTAMINATION. THIS TECHNICAL BULLETIN PROVIDES A PROCESS FOR RETAILERS TO CORRECTLY DIAGNOSE DYNAMIC RESPONSE SYSTEM CONTAMINATION, TO IDENTIFY IF AN ACTUATOR HAS FAILED, AND TO DETERMINE WHICH PARTS MAY REQUIRE REPLACEMENT. A FLUSHING PROCEDURE IS PROVIDED TO CLEAN THE AFFECTED PARTS THAT DO NOT NEED TO BE REPLACED AND ENSURE THAT THE ISSUE DOES NOT RE-OCCUR."

point.

(SEE FIG.1) ACTION: REPLACE BY PRESSING ON NEW BUTTON CAP PART NO: LR045801 (SEE FIG.2)"

BE FOUND WITHIN THE POWER STEERING FLUID SYSTEM WHICH COULD LEAD TO SYSTEM CONTAMINATION AND A DETERIORATION IN SYSTEM PERFORMANCE. CAUSE: INTERNAL DEBRIS FROM A SUSPECTED COMPONENT MALFUNCTION MAY RESULT IN THE POWER STEERING FLUID BECOMING CONTAMINATED."

ISSUE: A CUSTOMER MAY COMPLAIN OF A SQUEAK OR CREAK FROM THE STEERING COLUMN AREA ON ROTATION OF THE STEERING WHEEL. RANGE ROVER SPORT L320 ONLY. CAUSE: THE POWER STEERING PINION SEAL LACKS LUBRICATION AND DRIES OUT."

ACTION: WHEN DIAGNOSING CUSTOMER CONCERNS RELATING TO THE HYDRAULIC POWER STEERING SYSTEM, REFER TO THE SERVICE INFORMATION BELOW."

RANGE ROVER SPORT L320 ONLY. CAUSE: THE POWER STEERING PINION SEAL LACKS LUBRICATION AND DRIES OUT."

THE ISSUE IS COMMON ACROSS ALL MANUFACTURERS SYMPTOMS WHEN THE APPLE DEVICE IS CONNECTED TO THE CAR SYSTEM AND A CALL IS RECEIVED THERE IS NO OPTION TO ANSWER OR REJECT THE INCOMING CALL ON THE SYSTEM. THE STEERING WHEEL CONTROLS ALSO HAVE NO EFFECT. THE TOUCH SCREEN CONTINUES TO DISPLAY THE PHONE SCREEN. THE POP-UP SCREEN TO ANSWER OR REJECT THE CALL IS NOT SHOWN."

CAUSE: THIS MAY BE CAUSED BY A ROAD WHEEL/TIRE ASSEMBLY IMBALANCE AND/OR TEMPORARY TIRE FLAT-SPOTTING.

CAUSE: THIS MAY BE CAUSED BY MOLD SPORE ACCUMULATION / BUILD-UP IN THE FRONT EVAPORATOR CORE."

GAUGE AND SWITCHES ON/OFF INTERMITTENTLY, WHICH IS CAUSED BY AN ISSUE WITHIN INSTRUMENT CLUSTER (IC) SOFTWARE. MODEL 2008-2012 LR2, 2010-2013 LR4, 2010-2013 RANGE ROVER SPORT, 2010-2012 RANGE ROVER. *PE UPDATED 11/25/14. *PE

CAUSE: WHEEL AND TYRE ASSEMBLIES OUT OF BALANCE DUE TO WATER INSIDE THE WHEEL AND TYRE ASSEMBLIES. SEE ATTACHMENT FOR EXAMPLE."

CAUSE. WITH REFERENCE TO THE PHOTO ATTACHED, DUE TO THE TREAD PATTERN DESIGN OF THIS TYRE, THERE CAN APPEAR TO BE INNER OR OUTER SHOULDER WEAR. THIS IS IN FACT JUST THE NATURAL TREAD WEAR, BUT AS THE DESIGN OF THE LATERAL GROOVES CONTINUES AROUND TO THE SIDEWALL, THE VERY ENDS OF THE GROOVES DO NOT WEAR GIVING RISE TO A ""BAND"" OF WEAR AT THE EDGE OF THE CONTACT PATCH."

Dealer Data Update

Dealer Data Update

(blowing warm and then cold); ? Windshield, rear window, and/or door windows mist up in cool (15C or lower) ambient temperatures; ? Poor cooling performance of the Air Conditioning (A/C) system; and/or ? Warm, damp or musty smells coming from the vents.