2027 Kia Telluride TSBs

Over-the-Air (OTA) software update the Roof Control Module (RCM), Ultra-Wideband (UWB) and Side Body Control Module (SBCM) logic of certain 2027 Telluride vehicles. This update is designed to improve the controller type determination logic to remedy the sunroof operation anomaly, the connection and controller logic between Digital Key and Ultra-Wideband-supported smartphone devices has been improved to reduce 12V battery consumption and the Side Body Control Module (SBCM) to reduce noise that may occur during the folding and unfolding of the outside mirrors.

MODULE (SBCM) - This Over-the-Air (OTA) software update is designed to update the Roof Control Module (RCM), Ultra-Wideband (UWB) and Side Body Control Module (SBCM) logic of certain 2027 Telluride vehicles. This update is designed to improve the following: - Improves the controller type determination logic to remedy the sunroof operation anomaly. - The connection and controller logic between Digital Key and Ultra Wideband-supported smartphone devices has been improved to reduce 12V battery consumption. - Improves the Side Body Control Module (SBCM) to reduce noise that may occur during the folding and unfolding of the outside mirrors.

to upgrade the Side Body Zone Control Module - Driver SBCM_DRV and Side Body Zone Control Module - Assist SBCM_AST systems software on certain 2027MY Telluride (LQ2a) and 2027MY Telluride Hybrid (LQ2a HEV) vehicles produced from March 13, 2025 through August 27, 2025. Some of the affected vehicles may exhibit a popping noise from one or both outside sideview mirror(s) after the auto fold/unfold function is enabled and the vehicle is locked. This condition is caused by the SBCM sending an additional fold command after the mirrors have already completed the folding operation. This condition does not affect the ability of the mirror to fold or unfold.

Control Module RCM system software on certain 2027MY Telluride (LQ2a) vehicles produced from December 04, 2025 through May 28, 2026, and 2027MY Telluride Hybrid (LQ2a HEV) vehicles produced from December 05, 2025 through May 28, 2026. The affected vehicles may exhibit an illuminated Malfunction Indicator Lamp MIL accompanied by DTC U17000 which can cause the sunroof assembly to become inoperative.

upgrade the Ultra-Wideband Bluetooth Low Energy Master (UWB_BLE_M) system software on certain Digital Key 2-equipped 2027MY Telluride (LQ2a) vehicles produced from December 03, 2025, through June 04, 2026, and certain 2027MY Telluride Hybrid (LQ2a HEV) vehicles produced from December 04, 2025, through June 04, 2026. The improved software reduces power consumption from the vehicles auxiliary battery and enhances its performance by preventing the vehicle's auto-flush door handles from remaining extended for prolonged periods when a smartphone with Digital Key 2 remains nearby the parked vehicle. To extend the auto-flush door handles in this circumstance, the driver should press the lock/unlock indentation on either front door handle.

update is designed to update the Body Domian Controller (BDC) logic of certain 2027 Telluride vehicles. This update is designed to improve the connection and controller logic between Digital Key and Ultra Wideband-supported smartphone devices to reduce 12V battery consumption.

been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to improve the Body Domain Controller Body Control Module BDC-BCM system software on certain 2027MY Telluride (LQ2a) vehicles produced from December 03, 2026 through May 04, 2026 and certain 2027MY Telluride Hybrid (LQ2 HEV) vehicles produced from December 04, 2025 through May 04, 2026. The affected vehicles may experience excessive discharging of the 12V battery while parked, potentially resulting in a no-start condition.

provides information to improve the Body Domain Controller Body Control Module BDC-BCM system software on certain 2027MY Telluride (LQ2a) vehicles produced from December 03, 2026 through May 04, 2026 and certain 2027MY Telluride Hybrid (LQ2 HEV) vehicles produced from December 04, 2025 through May 04, 2026. The affected vehicles may experience excessive discharging of the 12V battery while parked, potentially resulting in a no-start condition.

information to upgrade the Door Handle Sensor Module DHS system software on certain 2027MY Telluride (LQ2a, LQ2 HEV) vehicles produced from December 03, 2025 through April 10, 2026, which may experience excessive discharging of the 12V battery while parked, potentially resulting in a no-start condition

procedure to upgrade the Rear Occupant Alert system software on certain 2027MY Telluride (LQ2a) vehicles produced from December 3, 2015 through February 3, 2026. If movement of objects in the rear seating area is detected under certain conditions after the ignition is turned off, the affected vehicles may unnecessarily sound the horn for approximately 25 seconds and send a text message to Kia Connect enrollees.

conducting a Voluntary Service Campaign on certain 2027 MY Telluride vehicles to adjust the brake booster pushrod.

the brake booster pushrod on certain 2027MY Telluride (LQ2) vehicles produced from January 2, 2026, through April 22, 2026. The brake booster pushrod may be improperly adjusted. As a result, following certain low-speed automatic braking events, a small amount of residual brake pressure may temporarily remain after systems such as Reverse Parking Collision-Avoidance Assist (PCA-R) or Rear Cross-Traffic Collision-Avoidance Assist (RCCA) automatically apply the brakes to help prevent a collision. After the automatic braking is canceled, the driver may experience the brakes lightly dragging for a short time. This condition does not affect braking performance or stopping distance.

dealer Parts and Service managers advising that Kia is conducting a Voluntary Service Campaign on certain 2027 MY Telluride vehicles, manufactured from January 2, 2026 through April 22, 2026, to adjust the brake booster pushrod.

advising that Kia is conducting a Voluntary Service Campaign on certain 2027 MY Telluride vehicles, manufactured from January 2, 2026 through April 22, 2026, to adjust the brake booster pushrod.

Electric Oil Pump (EOP) on certain 2027MY Telluride (LQ2a) vehicles produced from December 05, 2025 through March 25, 2026, which, due to insufficient hydraulic oil pressure in the automatic transaxle, may enter into a reduced power mode with the transaxle in 5th gear.

most frequently asked questions regarding the Voluntary Service Campaign SC377.

for downloading infotainment software updates and preparing USB for installation on applicable Kia vehicles. The software downloads and USB preparation process is similar across all supported platforms; however, invehicle installation procedures vary by head unit type.