2021 Kia Telluride TSBs

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to update the software on Display Audio 2.0 (D2V) and AVN 5.0 Wide (AVN5W) head units on certain 2021-2023MY Kia vehicles (refer to pages 5 and 16). The affected vehicles may experience Apple CarPlay/Android Auto phone projection connectivity-related concerns.

Dealer Mode Factory Reset on multiple 2020-2021MY vehicles (listed on page 5) equipped with AVN 5.0 Wide head units. The affected vehicles may exhibit inoperable and/or interrupted Kia Connect services due to a logic error with the current software version. This logic error may affect the Kia Connect services: calendar, weather, sports, vehicle diagnostics, maintenance and/or Kia Connect services rendering these features inoperable.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to update the software on 5th Generation AVN wide on certain 2020-2024MY Kia vehicles (refer to model list on page 3) to remedy a 'non-responsive' or 'inoperative' radio (FM, AM, SXM, etc. ) concern. The affected AVN unit on the vehicles may not respond when pressing the 'RADIO' hard key/button on the AVN unit or when selecting the 'RADIO' icon on the AVN menu screen.

information to update the software on 5th Generation AVN wide on certain 2020-2023MY Kia vehicles to remedy an inaccurate map location, freezing AVN screen, or experiencing a delay when using Google Maps or Waze through wired Apple CarPlay.

information to update the software on 5th Generation AVN wide on certain 2020-2023MY Kia vehicles (refer to model list on page 3) to remedy a warning sound accompanied by a 'Slippery road ahead. Drive carefully' or 'Uneven road ahead. Drive carefully' warning which is displayed on the instrument cluster. The current AVN software causes the warning sound and message to repeat approximately every ten (10) seconds, if the vehicle is not in motion, in 'PARK' or driving on even surfaces.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This Pitstop contains information regarding the log file collection procedure for 2020MY~ models equipped with AVN 5.0/W or Display Audio 2.0 head units.

the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster. The KDS is required to change the setting from "Workshop" to "Customer Mode."

a memory concern with the AVN 5.0 Wide head unit while downloading the contact list from a paired phone. The concern also affects Voice Recognition (VR) functionality.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This Pitstop contains information regarding the log file collection procedure for 2020MY~ models equipped with AVN 5.0/W or Display Audio 2.0 head units.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to turn OFF the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to turn OFF the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster.

file collection procedure for 2020MY~ models equipped with AVN 5.0/W or Display Audio 2.0 head units.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to repair, the female coaxial cable terminals located in the respective locations as shown below on some 2020-2021MY Telluride (ON) vehicles produced June 1, 2020 to September 2, 2020, equipped with Side View Monitor or (SVM) or Around View Monitor (AVM) systems, which may exhibit intermittent issues with camera images flickering, displaying lines on the display, or intermittent TPMS communication failures resulting in error messages on the cluster.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to repair, the female coaxial cable terminals located in the respective locations as shown below on some 2020-2021MY Telluride (ON) vehicles produced June 1, 2020 to September 2, 2020, equipped with Side View Monitor or (SVM) or Around View Monitor (AVM) systems, which may exhibit intermittent issues with camera images flickering, displaying lines on the display, or intermittent TPMS communication failures resulting in error messages on the cluster.

operation of Multi-Function Camera (MFC) on some Kia vehicles. When normal operation is not possible due to certain outside environment conditions (such as sunlight glare, heavy rain, sunlight, snow, fog and/or substance/debris) causing a temporary concern. This stops operation causing Warning Lamp ON and/or Pop-up Message displayed on the cluster. This is a normal operation of the ADAS and once environment conditions improve and/or substance/debris are removed, the system will clear itself and operate normally.

female coaxial cable terminals located in the respective locations as shown below on some 2020-2021MY Telluride (ON) vehicles produced June 1, 2020 to September 2, 2020, equipped with Side View Monitor or (SVM) or Around View Monitor (AVM) systems, which may exhibit intermittent issues with camera images flickering or displaying lines on the display.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This Pitstop provides diagnostic information to guide in diagnosis of suspected defective door speakers on some Kia vehicles.

the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster.

(WTY040) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information associated with the Warranty Extension Program (WTY040) to inspect and, if necessary, replace the self-leveling rear shock absorber(s) on certain 2020-2024MY Telluride (ON) vehicles manufactured from January 10, 2019 through September 14, 2023, AND equipped with self-leveling rear shock absorber(s) produced through June 04, 2023. The term of the warranty is being extended from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service. The affected vehicles may exhibit a noise from the rear suspension while traveling over bumps and/or a firm/stiff ride quality while driving. This concern does not impact the drivability or safety of the vehicle.

information associated with the Warranty Extension Program (WTY040) to inspect and, if necessary, replace the self-leveling rear shock absorber(s) on certain 2020-2024MY Telluride (ON) vehicles manufactured from January 10, 2019 through September 14, 2023, AND equipped with self-leveling rear shock absorber(s) produced through June 04, 2023. The term of the warranty is being extended from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service. The affected vehicles may exhibit a noise from the rear suspension while traveling over bumps and/or a firm/stiff ride quality while driving. This concern does not impact the drivability or safety of the vehicle.

2020-2024MY Telluride (ON) vehicles equipped with either Halogen or LED lamps. The headlamp desiccant pack(s) may expand over time during normal vehicle operation. Desiccant pack expansion is normal. Desiccant packs are a consumable part and once the pack has fully expanded, it is no longer a functioning part. If the desiccant pack/bracket is determined to be expanded as shown below, it is recommended to be removed from the dust cap and then be discarded without a required replacement.

extending the New Vehicle Limited Warranty coverage, to all owners, for repairs related to noisy and/or stiff self-leveling rear shock absorber(s) in 2020-2024 MY Telluride vehicles produced through September 14, 2023, AND equipped with one or both self-leveling rear shock absorber(s) produced through May 12, 2023. The term of the warranty is being extended from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service. This warranty extension is to address noise from the rear suspension when traveling over bumps and/or a firmer/stiff ride quality while driving free of charge at no cost to you.

dealer Parts and Service managers advising that Kia is extending the New Vehicle Limited Warranty coverage, to all owners, for repairs related to noisy and/or stiff self-leveling rear shock absorber(s) in 2020-2024 MY Telluride vehicles produced through September 14, 2023, AND equipped with one or both self-leveling rear shock absorber(s) produced through May 12, 2023. The term of the warranty is being extended from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service. This warranty extension is to address noise from the rear suspension when traveling over bumps and/or a firmer/stiff ride quality while driving free of charge at no cost to you.

advising that Kia is extending the New Vehicle Limited Warranty coverage, to all owners, for repairs related to noisy and/or stiff self-leveling rear shock absorber(s) in 2020-2024 MY Telluride vehicles produced through September 14, 2023, AND equipped with one or both self-leveling rear shock absorber(s) produced through May 12, 2023. The term of the warranty is being extended from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service. This warranty extension is to address noise from the rear suspension when traveling over bumps and/or a firmer/stiff ride quality while driving free of charge at no cost to you.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to replace the rear self-leveling shock insulator and locking nut on some 2020-2021MY Telluride (ON) vehicles produced from January 1, 2019 through December 1, 2020 which may exhibit noise from the rear of the vehicle while driving over bumps or on a bumpy road. Replacing the insulator instead of the complete rear shock assembly is recommended to help raise customer satisfaction with the reduced customer repair expense.

been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to update the software logic of the Front Collision-Avoidance Assist (FCA) and Smart Cruise Control (SCC) system on certain 2020-2022MY Telluride (ON) vehicles listed below. If foreign material, snow/ice, or roadway debris blocks the front radar located in the front bumper area, misalignment may occur, causing improper obstacle detection by the FCA system without illumination of the FCA warning lamp. If this condition occurs, the vehicle may apply partial braking when passing other vehicles. This update is to adjust the FCA warning lamp strategy and set conditions to improve the detection of a front radar misalignment condition.

provides information to update the software logic of the Front Collision-Avoidance Assist (FCA) and Smart Cruise Control (SCC) system on certain 2020-2022MY Telluride (ON) vehicles listed below. If foreign material, snow/ice, or roadway debris blocks the front radar located in the front bumper area, misalignment may occur, causing improper obstacle detection by the FCA system without illumination of the FCA warning lamp. If this condition occurs, the vehicle may apply partial braking when passing other vehicles. This update is to adjust the FCA warning lamp strategy and set conditions to improve the detection of a front radar misalignment condition.

self-leveling shock insulator and locking nut on some 2020-2021MY Telluride (ON) vehicles produced from January 1, 2019 through December 1, 2020 which may exhibit noise from the rear of the vehicle while driving over bumps or on a bumpy road. Replacing the insulator instead of the complete rear shock assembly is recommended to help raise customer satisfaction with the reduced customer repair expense.

equipped with 7-pin tow hitch harness (P/N: S9F67 AC500) either port or dealer installed.

substance found on some Kia vehicles, due to possible excess assembly oil applied during assembly.

Kia is conducting a Voluntary Emissions Service Campaign to improve the emissions software logic in the Electronic Control Module (ECM) for 2020-2025 MY Telluride vehicles to ensure compliance with emissions regulations.

to the dealer Parts and Service managers advising that Kia is conducting a Voluntary Emissions Service Campaign to improve the emissions software logic in the Electronic Control Module (ECM) to ensure compliance with emissions regulations for 2020-2025 MY Telluride vehicles manufactured from January 9, 2019 through October 27, 2025.

principals advising that Kia is conducting a Voluntary Emissions Service Campaign to improve the emissions software logic in the Electronic Control Module (ECM) to ensure compliance with emissions regulations for 2020-2025 MY Telluride vehicles manufactured from January 9, 2019 through October 27, 2025.

information related to the Technical Service Bulletin previously published under SC301, titled WSS Software Upgrade.

Kia is conducting a Voluntary Service Campaign to inspect and, if necessary, replace the wheel speed sensor(s) in certain 2020-2024 MY Telluride vehicles. Kia will also update the Hydraulic Electronic Control Unit (HECU) software with improved logic.

information to update the Wheel Speed Sensor (WSS) software on certain 2020-2024MY Telluride (ON) vehicles manufactured from January 9, 2019 through March 10, 2024.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This Pitstop provides information regarding a new interface related to the electronic Dealer (Shipping) / Customer Mode Switch setting on all applicable models.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This Pitstop provides information regarding the Rear Occupant Alert (ROA) with ultrasonic sensor feature designed to alert the driver, in the event that a rear passenger is remaining inside the vehicle.

alignment on 2014MY and later vehicles that may exhibit a warning light ON related to radar sensor alignment errors in the Forward Collision-Avoidance Assist (FCA)/Smart Cruise Control (SCC) system.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This Pitstop provides information regarding a new interface related to the electronic Dealer / Customer Mode Switch setting on multiple models.

bulletin provides information to inspect and, if necessary, replace the right front driveshaft on certain 2020-2024MY Telluride (ON) vehicles manufactured from January 9, 2019 through October 19, 2023 that previously had the campaign SC303 completed.

the most frequently asked questions regarding the Warranty Extension Campaign WTY040.

most frequently asked questions regarding the Voluntary Service Campaign SC301.

dealer Parts and Service Managers that Kia is conducting a Voluntary Service Campaign on all 2020-2023 MY and certain 2024 MY Telluride vehicles manufactured from January 9, 2019 through March 10, 2024.

that Kia is conducting a Voluntary Service Campaign on all 2020-2023 MY and certain 2024 MY Telluride vehicles manufactured from January 9, 2019 through March 10, 2024.

New/revised sections of this bulletin are indicated by a black bar in the margin area.This bulletin provides information on setting the "Service Interval Reminder" feature available on most 2014-2023MY Kia vehicles (refer to model list on page 2). If the service interval reminder is set, the customer will be informed to have the next maintenance service performed, which can positively affect vehicle longevity and performance. Refer to TSB ENG241 for 2023MY~ vehicles equipped with the Oil Life Management System (OLMS) feature not included in table on page 2.

frequently asked questions regarding the Voluntary Service Campaign (SC243).

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on the inspection and replacement of the front camera on some vehicles listed below. Due to an internal control chip concern inside the camera, the vehicle may exhibit an MIL on with DTC C160449 and/or C160649.

Interval Reminder" feature available on most Kia vehicles. If the service interval reminder is set, the customer will be informed to have the next maintenance service performed, which can positively affect vehicle longevity and performance.

that was mailed with the customer letter advising them to submit the form if they had paid for repairs for this same matter prior to the warranty extension campaign program launch.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the service reminder setting, which may have been auto-set by the Kia Vehicle Inspection and Delivery application (KVID) at time of Pre-Delivery Inspection (PDI). Beginning with the 2023MY, Oil Life Monitoring (OLM) has been applied to all models, except Forte (BDm), Stinger (CK), Telluride (ON) and Soul (SK3). Refer to TSB ENG241 for additional information. As of 08/11/2023, the service reminder auto-set feature by KVID has been disabled for ALL models NOT equipped with OLM.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This pitstop provides the KDS service procedure for mileage setting on the models listed below with newly replaced instrument clusters. Certain models allow for mileage setting with the KDS, which prevents the need to send out the instrument cluster to a 3rd party for mileage adjustment (refer to PS264). After a new cluster is installed, cluster (variant) coding may also need to be conducted using the KDS. Make sure the KDS software is also updated to the latest version. Mileage setting should be performed by using the KDS only, as described in this bulletin.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on the inspection and replacement of the front camera on some vehicles. Due to an internal control chip concern inside the camera, the vehicle may exhibit a Forward Collision Avoidance Assist Warning Lamp (A) and/or Master Warning Lamp (B) with C160449 and/or C160649 codes. Certain systems may become temporarily disabled during occurrences: Smart Cruise Control (SCC), Lane Keep Assistance (LKA), Lane Departure Warning (LDW), Forward Collision-Avoidance Assist (FCA), Forward Collision Warning (FCW) and/or Driver Attention Warning (DAW).

revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to update the software logic of the front view camera system (FR_CMR) on the vehicles listed below, when a new replacement Front View Camera installed with a part number ending in "SW0". NEW parts with a part number ending in "SW0" do not have the operating software upgrade installed. If the software upgrade is not installed, units will exhibit a warning light ON with Diagnostic Trouble Codes (DTCs) related to the front view camera. Some vehicles require recovery and recording the prior variant coding value before replacement.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on the inspection and replacement of the front camera on some vehicles. Due to an internal control chip concern inside the camera, the vehicle may exhibit a Forward Collision Avoidance Assist Warning Lamp (A) and/or Master Warning Lamp (B) with C160449 and/or C160649 codes. Certain systems may become temporarily disabled during occurrences: Smart Cruise Control (SCC), Lane Keep Assistance (LKA), Lane Departure Warning (LDW), Forward Collision-Avoidance Assist (FCA), Forward Collision Warning (FCW) and/or Driver Attention Warning (DAW).

procedure to update the software logic of the Front Camera (FR_CMR) system on the vehicles listed below, which have had a new replacement Front View Camera installed without software upgrade. If the S/W is not upgraded, units will exhibit a warning light ON with Diagnostic Trouble Codes (DTCs) related to the Front Camera (FR_CMR).

ensure proper internal connections of the headlamp on some 2021MY K5 (DL3a) vehicles produced from March 27, 2020 through April 14, 2021 and some 2020-2021MY Telluride (ON) vehicles produced from January 9, 2019 through April 12, 2021, which may exhibit inoperative/intermittently inoperative LED low beam or Daytime Running Lights (DRL) on K5, or low/sub-low beam on Telluride.

on the inspection and replacement of the front camera on some 2020-2021MY Telluride (ON) vehicles, produced from August 7, 2018 through November 30, 2020. Due to an internal control chip concern inside the camera, the vehicle may exhibit an MIL on with DTC C160449 and/or C160649, as well as illumination of the Smart Cruise Control (SCC), Lane Keep Assistance (LKA), Lane Departure Warning (LDW), Forward Collision-Avoidance Assist (FCA), Forward Collision Warning (FCW) and/or Driver Attention Warning (DAW) lights. These systems may become temporarily disabled during occurrences.

This bulletin provides information to upgrade the Engine Control Unit (ECU) system software to improve the emissions-related logic on 2020-2025MY Telluride (ON) vehicles equipped with the Lambda II 3.8L GDI engine, produced from January 9, 2019 through October 27, 2025. The subject vehicles may have engine calibrations that were not optimized for emissions standards under certain specific conditions, which may cause the vehicle to release air pollutants which exceed Federal and California standards.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to inspect for a knocking/clicking noise present in the rear of the vehicle during low-speed driving (25MPH or less) on some 2020-2022MY Kia vehicles equipped with All Wheel Drive (AWD). The 4WD coupling snap ring may have excessive play between the drive gear set shaft and coupling flange.

air condition (AIRCON) software logic on certain 2020-2023MY Telluride (ON) vehicles equipped with Dual Air Temperature Control (DATC), produced from January 9, 2019 through June 6, 2023. The affected vehicles may exhibit temporarily reduced heater performance in cold climates, especially during prolonged idle operation or coasting.

to inspect for a knocking/clicking noise present in the rear of the vehicle during low-speed driving (25MPH or less) on some 2020-2022MY Kia vehicles equipped with All Wheel Drive (AWD). The 4WD coupling snap ring may have excessive play between the drive gear set shaft and coupling flange.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to some Kia models that may exhibit fogging, condensation, and/or moisture inside a headlamp assembly. Generally, a fogging condition is considered normal and can be eliminated by turning on the headlamps with the engine running for up to 30 minutes or during normal driving conditions. Headlamp assembly replacement WILL NOT be necessary in most cases.

revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information related to extracting in use performance tracking emissions data from the Engine Control Unit (ECU) of certain vehicles sold in California. The California Air Resources Board (CARB) requires the emissions data from vehicles with a minimum of 3,000 accumulated miles without reprogramming or resetting.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information related to extracting in use performance tracking emissions data from the Engine Control Unit (ECU) of certain vehicles sold in California. The California Air Resources Board (CARB) requires the emissions data from vehicles with a minimum of 3,000 accumulated miles without reprogramming or resetting.

When diagnosing a vehicle for this condition, check that connectors R02 and R03 are connected in the correct cavities. If these connectors were previously interchanged unintentionally, the sunroof switch will not operate.

replace the door belt outside weatherstrip(s) on certain 2023-2025MY Telluride (ON) vehicles produced from August 04, 2020 through February 11, 2025. The affected vehicles maybe missing an adhesive layer, causing the outer faceplate to detach/separate from the door belt outside weatherstrip molding. If a customer has a validated complaint of a door belt outside weatherstrip detaching and/or separating, replace it and any weatherstrip(s) that have not yet been replaced under warranty (including SA535 or SA578) according to the VIN list and procedure in this TSB.

information to perform a partial replacement of the sunroof wind deflector and mechanism arms on some 2019-2022MY Telluride (ON) vehicles produced from February 15, 2019 through January 19, 2022. The affected vehicles may experience the sunroof open/close operation inoperative and/or the sunroof wind deflector function inoperative.

the overhead console lamp assembly and sunglass door latch on some 2012-2023MY model vehicles listed in the table below, which may encounter the sunglass case of the overhead console lamp not closing properly.

provides the procedure to inspect and replace the front door(s) belt line molding on some 2021MY Telluride (ON) vehicles produced from September 14, 2020 through September 18, 2020, which may have had the incorrect color molding installed during assembly and do not match the rear door belt line moldings.

New/revised sections of this bulletin are indicated by a black bar in the margin area. When servicing windshield wipers on the below listed vehicles, including during PDI, ensure to raise the wiper arms to a vertical position to avoid damaging the paint on the rear edge of the hood.

Parking Distance Warning (PDW) alerts and repairs involving ultrasonic sensors. The PDW system alerts the driver while parking, by calculating distance based on the difference in signal transmission and reception times between the vehicle (ultrasonic sensor) and an object. The membrane film of the ultrasonic sensor is used for object detention and can be damaged by stone chips or foreign substances while driving. Damage to the cover of the ultrasonic sensor can also lead to damage to the internal circuit. As a result of this external damage, the PDW system may not receive the proper signal from the ultrasonic sensor. In some cases, the system may cause a false alarm, no alert, or phantom warnings by a Warning Lamp to be displayed on the cluster. The ultrasonic sensor membrane film should be always inspected for external damage and if any part replacement should be treated as a general repair, not as a warranty claim repair for this concern. (Please note that this Pitstop only applies to models/trims that are equipped with the ultrasonic sensors.)

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, and the transmission oil cooler is transferred to the new transmission.

A flush is required ONLY when a transmission is replaced.

with the All-Wheel-Drive (AWD) system due to tire sizes of differing circumference. Some customers may complain of a chatter sensation felt in the drivetrain of the vehicle and/or the failure of drivetrain component(s). A difference in tire size (width, aspect ratio, construction, rim diameter etc.) may be the cause.

correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, refer to applicable vehicles in the chart starting on page 2.

containing the most frequently asked questions regarding the Voluntary Emissions Service Campaign SC357.

a Voluntary Service Campaign to update the Forward Collision-Avoidance Assist ("FCA") software logic in certain 2020-2022 MY Telluride vehicles.

Parts and Service Managers that Kia is conducting Voluntary Service Campaign to update the FCA software on certain 2020-2022 MY Telluride vehicles manufactured from January 9, 2019 through July 26, 2022.

is conducting Voluntary Service Campaign to update the FCA software on certain 2020-2022 MY Telluride vehicles manufactured from January 9, 2019 through July 26, 2022.

upgrade the 4-Wheel Drive 4WD system software on certain 2020-2022MY Telluride (ON) vehicles produced from January 9, 2019, through September 1, 2022. The affected vehicles may exhibit a noise, vibration, shudder, and/or chattering from the 4WD coupling assembly while turning at low speeds (10-15 mph) due to continuous vehicle operation in harsh conditions (e.g., very high or low ambient temperatures).

information regarding some 2020-2021MY Telluride (ON) AWD vehicles produced from SOP through February 28, 2021, which may exhibit vibration at highways speeds between 60-75MPH. Follow the flowchart on page 2 to inspect the vehicle's tires (tire pressure and road force values) and adjust tire (RFV)/tire balance. If the vibration is still present, replacement of additional parts (propeller shaft and AWD coupling) may be required to correct the concern.

resetting the modem in certain 2016-2025MY Kia vehicles listed on page 3 that are equipped with Kia Connect Services. The affected vehicles may encounter the following issues: remote Start/Climate Control function not working, vehicle Status on the Kia Access App not updating, connected routing not functioning properly.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This Pitstop provides information regarding the Rear Occupant Alert (ROA) with Rear Door Logic system on all 21MY~ models equipped with this feature. This system is designed to help prevent a rear passenger from being left inside the vehicle when exiting. The "Check Rear Seats" message will display on the cluster when driver opens the front door, if during vehicle operation the rear doors (one or both) were opened and closed.